}

Landscaping And Beautification Of Adi Ganga For A Stretch About 1000M From Kalighat Bridge To Alipore Bridge Alipore Museum Side In Alipore Kolkata, kolkata-West Bengal

West Bengal Housing Infrastructure Development Corporation Limited-HIDCO has published Landscaping And Beautification Of Adi Ganga For A Stretch About 1000M From Kalighat Bridge To Alipore Bridge Alipore Museum Side In Alipore Kolkata. Submission Date for this Tender is 17-10-2022. Landscape Tenders in kolkata West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

34131400
Landscaping And Beautification Of Adi Ganga For A Stretch About 1000M From Kalighat Bridge To Alipore Bridge Alipore Museum Side In Alipore Kolkata
Open Tender
Indian
West Bengal
kolkata
17-10-2022

Tender Details

Landscaping And Beautification Of Adi Ganga For A Stretch About 1000M From Kalighat Bridge To Alipore Bridge Alipore Museum Side In Alipore Kolkata

Key Value

Document Fees
Refer document
EMD
INR 553692.0 /-
Tender Value
INR 2.76 Crore /-

BOQ Items

Name of Work: Landscaping and Beautification of Adi Ganga for a strech about 1000 m from Kalighat bridge to Alipore Bridge (Alipore Museum side) in Alipore, Kolkata.
Sl. No. Item Description
1Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. (vide page no.85, item no. 2.12 of CPWD Horticulture and landscaping work schedule 2020)
2Excavation in dumped stones or malba including stacking of serviceable and unserviceable material separately and disposal of unserviceable material, lead upto 50m. and lift upto 1.5m. disposed material to be neatly dressed. (vide page no.87, item no. 2.21 of CPWD Horticulture and landscaping work schedule 2020)
3Earth work in filling in trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (vide page no.1, item no.3 of PWD Building work schedule 2017)
4Supply and laying silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) (vide page no.2, item no.4 of PWD Building work schedule 2017)
5Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. (vide page no.12, item no.13 of PWD Building work schedule 2017)
6Anti termite treatment of lawn area through premise 30.50% IP. one liter premise diluted in 499 liters water and applying solution @ 1.00 liter solution per sqm. lawn or bed area. (two application) i/c cost of chemical and as per direction of officer in charge and as per direction of officer in charge.(vide page no. 99, item no. 2.56 of CPWD Horticulture and landscaping work schedule 2020)
7Flooding the ground with water including making quarries and dismantling the same. (vide page no. 87, item no. 2.24 of CPWD Horticulture and landscaping work schedule 2020)
8Fine dressing of ground. (vide page no. 83, item no. 2.7 of CPWD Horticulture and landscaping work schedule 2020)
9Cost of digging pit of size 0.45 mt. x 0.45 mt. x 0.45 mt. height
10Supply of growing media including cocohusk, vermicoposed, perlite and organic manure. (50 kg. per bag.)
11i)Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). (vide page no. 83, item no. 2.8 of CPWD Horticulture and landscaping work schedule 2020)
12ii)Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge. (vide page no. 83, item no. 2.9 of CPWD Horticulture and landscaping work schedule 2020)
13Supply and stacking of rotten cowdung manure at site including loading and unloading and carriage upto the site.
14Supplying and fixing grasses tiles of grass Maxican Carpet/Selection No. 1 Healthy & fresh grasses (size 1"x1" or bigger) including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from wees and fit for mowing including supplying good earth as required by Engineer-in-charge. (Rate includes supply of labour, tools & plants including materials) (vide page no.259, item no.4 of PWD Building work schedule 2017)
15Creation of hedge by MALPHIGIA NEW VARIETY (Carmona retusa) including supply and planting.
16Creation of hedge by SYZYGIUM.
17Supply ofBOUGAINVELLEA DWARF including planting.
18Supply of LAGERSTROEMIA including planting
19Supply of FOXTAIL PALM (height 4’ – 5’) including planting
20Supply of CYCAS (height 2’ – 3’) including planting
21Supply of ASHOKA PENDULA including planting
22Ornamental brick edging (75 mm wide) in pathway, gardens etc. with 1st class or picked jhama bricks laid diagonally on end and with a corner slightly raised from the adjoining surface thus giving saw tooth appearance including cutting trench laying bricks and repacking the trench thoroughly on both sides of the edging complete as per direction. (vide page no.227, item no.5 of PWD Building work schedule 2017)
23Supplying, fitting and fixing of 25 mm thick 150 mm width Deck Wood Flooring in walkway with necessary accesseries (Lshaped end cap, PVC clamp, screws etc.)
24Supplying, fitting & fixing Glass mosaic tiles in fountain/water body at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineerin- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge. (vide page no.67, item no.38 of PWD Building work schedule 2017)
25Supply and laying Gravel stone
26Plain Cement concrete (mix 1:3:6) with graded stone ballast (40 mm excluding shuttering) Pakur variety (vide page no.34, item no.22, 3rd corrigenda of PWD Building work schedule 2017)
27Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any as per relevant IS codes. Pakur variety (vide page no.24, item no.4, 3rd corrigenda of PWD Building work schedule 2017)
28Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.
29Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works. 9 to 12 mm thick approved quality ply board shuttering in any concrete work (vide page no.42, item no.36 of PWD Building work schedule 2017)
30Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.(vide page no.14, item no.1, 3rd corrigenda of PWD Building work schedule 2017)
31Brick work with 1st class bricks in cement mortar (1:4) (vide page no.15, item no.7, 3rd corrigenda of PWD Building work schedule 2017)
3220 mm thick Plaster with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary.With 1:4 cement mortar (vide page no.189, item no.1, 3rd corrigenda of PWD Building work schedule 2017)
33Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer"s specification and as per direction of the EIC.Two coats (vide page no.196, item no.8 of PWD Building work schedule 2017)
34Protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystalline additives derive from Granite as per manufacturer"s specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Two coats (vide page no.197, item no.16 of PWD Building work schedule 2017)
35Supply, fitting, fixing of MS Railing (25 x 25 x 3mm SHS) : (vide page no.101, item no.2, 3rd corrigenda of PWD Building work schedule 2017)a) 2.4 m. height - 110 rmt.
36Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx)
37Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. 12mm thick cleared toughened glass coforming to IS: 2553-1992 (Part-II)
38Supply, fitting, fixing of MS Gate (50 x 50 x 3mm SHS) :a) 6 m. length and 2.1 m. height (1 no)
39b) 2 m. length and 2.1 m. height (2 nos)
40c) 3.6 m. length and 2.1 m. height (1 no)
41Priming one coat on steel surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (vide page no.200, item no.1 of PWD Building work schedule 2017)
42Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On steel surface : With super gloss (hi-gloss) Two coats (with any shade except white) (vide page no.201, item no.2 of PWD Building work schedule 2017)
431 set of 3 m dia. Fountain (as per drawing) consisting of 4 nos Fifth Avenue with necessary hydraulic circuit, Gate Valve, Pipe works.12 Sets of RGB-LED, 100 model Lights with stainless steel body, light stand and all other accessories. Lights are IP-67 Certified. 1 set of 5.0 HP. Monobloc Submersible Pump with 10 mtr length cable, sunction strainer, Base Frame, Nuts and Bolts. 1 Lot cable for Pump set and Lights, maximum length 20 mtr (approx). 1 no Standard Outdoor type Control panel in sheet steel paint finish enclosure, front hinged door, back wall mounting type with provision for incoming and outgoing cable entry. Panel comprises of motor, main switches, contractors, overload relays, fuses, indicator lamp, push button ON OFF switches etc. complete with internal wiring, Panel is IP-55 Certified.
44Supply and installation of Wooden sitting bench (1800 mm x 700 mm) with metal support fixed in plain cement concrete bed.
45Supply, fitting, fixing of Wooden frame structure (200 mm x 200 mm x 3 m ht.) with necessary accessories.
46Bamboo pile walling made of 65 mm to 75 mm dia. Bamboo (in single line) driven about half length into the ground at very close spacing side by side including necessary bamboo stays, ties, runners etc and lining the exposed portion with sheets made form cut-drums fitted and fixed complete as per direction. With bamboos of length above 2.40 m. and up to 3.00 m. each
47Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts and nuts etc. With "P" trap In any floor.
48Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws omplete.E.W.C. Plastic (Hallow type) black.In any floor.
49Supplying, fitting and fixing 32 mm. dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.Polythene flush pipeIn any floor.
50Supplying, fitting and fixing Liquid soap Container.Chromium platedIn any floor.
51Supplying, fitting and fixing Soap holder. PTMT (Prayag or equivalent). In any floor.
52Supplying, fitting and fixing Towel rail with two brackets. C.P. over brass. 25 mm. dia. and 600 mm. long. In any floor.
53Supplying P.V.C. water storage tank of approved quality with closed top with lid(Black) - Multilayer 2000 litre capacity
545000 litre capacity
55Supplying, fitting and fixing cast iron raised rain proof tank cover 500 mm dia. with locking arrangements (weighing not less than 12 kg).
56Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm. dia. 900 mm. long In any floor
57Supplying, fitting and fixing pillar cock of approved make. CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand).
58Supplying, fitting and fixing C.P. Extension Pipe
59Supplying, fitting and fixing C.P. Wall Flange
60Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete, C.I. brackets including two coats of painting to bracket etc. In any floor.
61Supplying, fitting and fixing shower of approved brand and make. Chromium plated double coat Hook (Equivalent to Code No. 35761 & Model - KUBIX of Jaquar or similar).
62Hand Shower (Health Faucet) with 1mtr Fexible Tube with Wall Hook (Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).
63Supplying, fitting and fixing C.P. Bib Cock or Stop Cock. Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand)
64Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).
65Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of paintingwith approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will bemade for accesories, specials. Payment for painting will be made seperately) For Exposed Work PVC Pipes 15 mm
6620 mm
67For Concealed Work (Dia) 15 mm
6820 mm
69Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, Nongscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.) PVC Pipes (Dia) 20 mm
7025 mm
7132 mm
7240 mm
7350 mm
7465 mm
75Supplying, fitting & fixing Aluminium domical grating. 100 mm
76Supply of UPVC pipes (B type) and fittings conforming to I.S. 13592-1992 Single socketed 3 Meter length. 110 mm.
77Single socketed 1.8 Meter length. 110 mm.
78Single socketed 1.2 Meter length. 110 mm.
79Double socketed 0.9 Meter length. 110 mm.
80Double socketed 0.6 Meter length. 110 mm.
81Fittings Coupler 110 mm.
82Plain Tee 110 mm.
83Door Tee 110 mm.
84Door Y (LH) & (RH). 110 mm.
85Double Y with Door 110 mm.
86Bend 87.5º 110 mm.
87Door Bend (T.S.) 110 mm.
88Vent Cowl 110 mm.
89Pipe Clip 110 mm.
90110/110 Q Trap
91Labour for fitting and fixing UPVC pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-inCharge.(Payment will be made on centre line measurement of the total pipeline including specials). Above ground. 110 mm. dia
92Under ground. 110 mm. dia.
93Supplying & laying Double Wall Corrugated (with external annular corrugation and smooth internal walls) High Density Polyethelene Pipes conforming to IS 16098 (Part-II):2013 having Stiffness Class of SN 8 with Ring Stiffness not less than 8.00 KN/Sqm. and Impact Resistance TIR value not more than 10% including necessary jointing materials for nonpressure underground Drainage,Sewerage & Cross drainage application. 150mm internal dia.
94Constructing Inspection pit of insideeasurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides,bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. With Pakur variety. (SAIL/TATA/RINL)
95Extra for each additional depth of 150 mm or part thereof beyond initial 600 mm depth
96Supplying, fitting and fixing Peet"s valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). 65 mm
9750 mm
9840 mm
99Supplying, fitting and fixing in position FRP/GRP/COMPOSITE UV stabilizer Manhole Cover with high abrasion surfaceof 7mm top thickness with density of 2KG/m³ - approved make with rim of approved make (Heavy type) 20 MT load bearing capacity round manhole cover provided with two lifter hooks fitted with matching frame of size Frame: 600 mm (24")
100Supplying, fitting and fixing in position FRP/GRP/COMPOSITE UV stabilizer Gully Pit Cover with high abrasion surface of 7mm top thicknes, density of 2KG/m³ of approved make with rim of approved make (Heavy type) 20 M.T. Gully pit cover (yard gully) with arrangement for opening of size Frame Clear Opening 60 Each 8941.00 536460.00 500 mm X 600 mm Cover Out to Out 560 mm X 660 mm
101Cutting chase upto 125 x 150 mm. and subsequent mending of damages. In brick wall [Cement-3.6 Kg/Mtr]
102Providing and fixing Gun Metal Non - Return Valve (screwed end) :50 mm dia. Vertical
103Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm dia
10450 mm dia
10565 mm dia
106Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating eachdeposited layer by ramming, watering, etc. and disposing of surplus excavated soil asdirected, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
107Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe
108Supplying, fitting and fixing GI Pouddle piece (puddle at centre) made of GI. pipes & M S Flange hot-dip galvanised and placing it in RCC wall before casting by maintaining proper level inclduing welding with the structural steel etc. complete. 25 mm dia. x 400 mm long
10940 mm dia x 400 mm long
11050 mm dia x 400 mm long
11165 mm dia x 400 mm long
11280 mm dia x 400 mm long
113100 mm dia x 400 mm long
114Supplying, installating Openwell Submarsible Pumpset ( KIRLOSKAR make - 167 LPM, 8 mtr head) (motor rating - 0.746 KW / 2800 RPM/210 V, 1 Ph, Suc x delivery (50x40mm) with non-return valve suitable for clear water. including Ammeter, voltmeter, over load relay, manual ride over, SPP, dry run protection & 1 no. of extra potential free contact etc. 1 no. Control Panel Logic - Auto/Manual, Starter - DOL. alongwith base frame, suction / deliver manifold, valves, 1 no. of pressure gauge and other necessary fittings as required.(Rates are amalgamated for Pumps - 1 working condition + 1 standby = 2 Nos. and 1 no. control panel for both pumps)
115ADD9% SGST ON 23264365.77
116ADD9% CGST ON 23264365.77
117ADD1% CESSON 23264365.77
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail