}

Renovation Of Damaged Bituminous Road Starting From Mistimukh Upto Shop Of Narayan Dutta At Alupatty Road In Ward No 5 And 6 Under Chandernagore Municipal Corporation, Hooghly-West Bengal

Municipal Affairs Department has published Renovation Of Damaged Bituminous Road Starting From Mistimukh Upto Shop Of Narayan Dutta At Alupatty Road In Ward No 5 And 6 Under Chandernagore Municipal Corporation. Submission Date for this Tender is 07-10-2022. Road Repair Tenders in Hooghly West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

34121856
Renovation Of Damaged Bituminous Road Starting From Mistimukh Upto Shop Of Narayan Dutta At Alupatty Road In Ward No 5 And 6 Under Chandernagore Municipal Corporation
Open Tender
Indian
West Bengal
Hooghly
07-10-2022

Tender Details

Renovation Of Damaged Bituminous Road Starting From Mistimukh Upto Shop Of Narayan Dutta At Alupatty Road In Ward No 5 And 6 Under Chandernagore Municipal Corporation

Key Value

Document Fees
INR 750 /-
EMD
INR 6195.0 /-
Tender Value
INR 3.09 Lakhs /-

BOQ Items

Name of Work: Renovation of damaged bituminous road starting from Mistimukh upto Shop of Narayan Dutta at Alupatty road in ward no- 5 & 6 under Chandernagore Municipal Corporation.
Sl. No. Item Description
1Page No- 1, Item No- 1Surface dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15cm depth and disposal of the rubbish within a lead upto 75m. As directed.
2Page- 244, Item No. 4.10Water Bound Macadam Sub Base by consolidating Jhama metal / Laterite chelly or stone metal / shingles of specific size in hard crust to requisite thickness (measured after compaction) in layers including screening of metals etc. as necessary, hand packing, sweeping, watering and rolling in stages with power roller to proper line, grade and camber, lighting, guarding & barricading and making necessary earthen bundh of one metre width on each side where necessary to protect edges and preparing the bed by necessary cutting or filling and rolling all complete including the cost of all materials and hire and labour charges of all men and machineries and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).(i) For Construction of Sub Base by consolidatingJhama metal (63 mm to 45 mm) with moorumscreening :Add cost at site of 1.09 m3 of jhama metal and 0.26 m3 of moorum screening (loose volume) to arrive at the consolidated rate.
3Page-248, Item No. 5.01 (i) Providing and applying primer coat with cationic bitumen emulsion of approved grade conforming to IS: 8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface and spraying primer using mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per clause 502 of specifications for road & bridge works of MoRT&H (5th Revision).(i) For WBM/WMM Surface: (with primer @ 0.70-1.0 kg/sqm)
4Page-249, Item No. 5.04 B Providing and laying bituminous macadam with mobile hot mix plant (Light Duty) using approved crushed aggregates of specified grading as per table 500.7 premixed with bituminous binder, transported to site laid over a previously prepared surface at specified laying temperature by means of approved and suitable arrangements to the required grade.................. quality control complete as per specifications for road & bridge works of Mort&h (5th Revision)B. for grading 2 (19 mm nominal size, 50-75 mm thick). Add cost & carriages of materials as per requirement vide Table 3.3-1 of section 3 to get the final consulted rate.
5Page-248, Item No. 5.02 (ii) Providing and applying tack coat with cationic bitumen emulsion of approved grade confirming to IS: 8887-1978 on the prepared surface cleaned with hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per clause 503 of specifications for road & bridge works of MoRT&H (5th Revision). ii) On Granular surface treated with primer (using Bitumen emulsion at the rate of 0.25 to 0.30 kg per sqm.)
6Page-254, Item No. 5.11 Open-Graded Premix Surfacing using Bituminous (Viscosity grade Paving Bitumen / Modified bitumen)Binder and Mobile Hot Mix Plant (Light Duty) Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface, including line, grade and level to serve as wearing course on a previously prepared base, including mixing in Mobile Hot Mix Plant (Light Duty) and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregatesto required temperature and including the hire charges of Mobile Hot Mix Plant (Light Duty) and other machinery, pay of operators, cost of fuel and lubricants etc. complete to be followed by seal coat of either Type A or Type B as per Technical Specification Clause 508 for Rural Roads of MORD.
7Page - 248, Item No. 5.02 (ii)Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (ii) On Granular surfaces treated with primer (Using Bitumen emulsion at the rate of 0.25 to 0.30 kg per sqm.)
8Page-255, Item No. 5.13 (B) (i)Providing and laying premixed seal coat (Type B) with approved quality sand/grit @0.6 m3/10m2 and bitumen binder on thoroughly cleaned black top surface coated with tack coat, including heating, and mixing cleaned sand/grit (100% passing through 2.36mm sieve and retained on 180 micron sieve) fuel and lubricants, including hire charges of the mix at an uniform rate using suitable means, brushing the surface, if necessary, to ensure uniformity, followed by rolling with power roller including cost and carriage of binder and aggregates, cost of heating the binder and aggregates and all other incidental charges, cost of fuel and lubricants, including hire charges machineries, tools @ plants required for construction and quality control complete as per clause 511 of specifications for road & bridge works of MoRT&H (5th revision).
9Add 9% CGST
10Add 9% CGST
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail