}

Construction Of Mukto Mancho For Panchanan Shriti Sangha At Baromohansinghjote, Darjeeling-West Bengal

Zilla Parishad-ZP has published Construction Of Mukto Mancho For Panchanan Shriti Sangha At Baromohansinghjote. Submission Date for this Tender is 22-10-2022. Civil Work Tenders in Darjeeling West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

34118208
Construction Of Mukto Mancho For Panchanan Shriti Sangha At Baromohansinghjote
Open Tender
Indian
West Bengal
Darjeeling
22-10-2022

Tender Details

Construction Of Mukto Mancho For Panchanan Shriti Sangha At Baromohansinghjote

Key Value

Document Fees
Refer document
EMD
INR 12455.0 /-
Tender Value
INR 6.22 Lakhs /-

BOQ Items

Name of Work : CONSTRUCTION OF MUKTO MANCHO FOR PANCHANAN SHRITI SANGHA AT BAROMOHANSINGHJOTE
Sl. No. Item Description
1Earthwork in excavation of drain in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75m as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1.5m
2Laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics without rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth.
3Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (b) River bazree .
4Ordinary cement concrete (mix 1:1.5:3) with graded stonechips (20mm nominal size) excluding shuttering and reinforcement, if any, as per relevant IS code.
5Brick work with 1st class bricks in cement mortar (1:6). (a) In foundation and plinth STEPS
6125 mm. thick brick work with 1st class bricks in cement mortar (1:3) in ground floor
7A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
8Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust(if necessary)cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. Tor steel / Mild steel Other thanSAIL / TATA / RINL
9M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816- 1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural tubular memebrs as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a height of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. i) For trusses spanning up to 12.00 m
10Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) (i) In Roof:- b) With 0.63 mm thick sheet
11Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping)
12Galvanised iron sheet eaves gutter fitted and fixed with necessary 50 mm X 6 mm M.S flat bar clamps bent to design, bolts, nuts, washers etc. complete. Eaves gutter made of 0.63 mm. sheets. (b) 300 mm. wide gutter
13Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (b) River bazree .
14(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or
15Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25mm to 30mm thick wooden shuttering without staging in foundation.
16Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (b) 25mm to 30mm thick wooden shuttering with staging in foundation.
17Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(c) Sal : Siliguri.
18Z-batten shutters of door and window as per design havings tongued and groove-half lap jointed as per direction of the Engineer-in-Charge including fitting and fixing shutter in position, but excluding the cost of hinges and other fittings in ground floor.iii) Sishu, Gamar, Champ, Badam, Bhola, Morga, Hallak.
19(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor
20Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid
21Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.in-Charge. (iii) 75mm. X 40mm. X 1.12mm.
22Iron socket bolt of approved quality fitted and fixed complete (c) 150mm long x 10mm dia bolt.
23i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.in-Charge.(b) 250mm long.
24Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete
25Plaster to wall with sand cement mortar including rounding off or chamfering corners as directed and raking out joints, including throating, nosing and drip course, scaffolding/staging where necessary.
26Neat cement punning about 1.5mm thick in wall, floor.
27Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface
28Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer"s specification) including cleaning and smoothning of surface.
29Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The ratincludes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer
30(a) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
31(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface : (ii) Two coats (white in shade)
32Providing fixing Display Board made of G.I. sheet (28" x 34") with 40 mm sq. pipe frame with two legged 4"-6" height including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge.
33Add CGST 6%
34Add SGST 6%
35Add Cess 1%
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail