Military Engineer Services-MES has published Special Repairs To Bldg No V-6 At Nkd Of 16 Madras Alongwith Provision Of Certain Revenue And Minor Works. Submission Date for this Tender is 17-10-2022. Building Work Tenders in SILIGURI West Bengal. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 07-Oct-2022 | BOQ CORRIGENDUM | BOQ | 17-10-2022 |
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel sheeting any gauge, thickness as in roof covering complete all as specified and directed |
| 2 | Supply and fix, 0.63 mm thick corrugated galvanised mild steel sheeting (minimum 275gm/sqm galvanising) with two corrugations side lap, fixed with L type or J type or cranked hooks , bolts and washer in roof, complete, all as specified and directed. |
| 3 | Supply and fix plain galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing of 0.80mm thickness (minimum 275gm/sqm galvanising)complete all as specified and directed. |
| 4 | Material and labour for preparing new galvanised surfaces to receive painting by coating with mordent solution including washing and cleaning and applying two coats of synthetic enamel paint over a coat of red oxide primer over 10 cm width or girth on steel surface with complete all as specified and directed. |
| 5 | Material and labour for preparation of oldsteel surfaces of any description, over 10 cm width or girth not other wise described and applying one coat of synthetic enamel paint with complete all as specified and directed. |
| 6 | Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.50 Sqm but n exc 4.0 Sqm each including iron mongeries complete all as specified and directed. |
| 7 | Supply and fix 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete, all as specified and directed |
| 8 | S& F for 30mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats with complete all as specified and directed. |
| 9 | S&F2nd class HW 35mm thick Glazed and skeleton shutters,divided into squared, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats with complete all as specified and directed. |
| 10 | Taking down chowkats or frames with shutter (without taking off shutter from the frame) n.exc 1.50 Sqm each including iron mongeries complete all as specified and directed. |
| 11 | S&F2nd class HW 30mm thick Glazed and skeleton shutters,divided into squared, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats with complete all as specified and directed. |
| 12 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 with complete all as specified and directed. |
| 13 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 14 | Supply & fix Aluminium anodisedbarrel tower bolt 150 mm long of extruded section etc complete all as specified and directed. |
| 15 | Supply & fix Aluminium anodisedbarrel tower bolt 125 mm long of extruded section etc complete all as specified and directed. |
| 16 | Supply and fix MS butt hinges medium weight, cold rolled 100mm size complete all as specified and directed. |
| 17 | Supply and fix MS butt hinges medium weight, cold rolled 75mm size complete all as specified and directed. |
| 18 | Supply & fix ExtrudedAluminium anodised alloy handles fabricated type 150mm long complete all as specified and directed. |
| 19 | Supply & fix ExtrudedAluminium anodised alloy handles fabricated type 125mm long complete all as specified and directed. |
| 20 | Supply & fix aluminium alloy, anodised, sliding door bolts 250mm size with hasp, staple (bolt type) and fixing clips of sheets , cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy andfixed etc complete all as specified and directed. |
| 21 | Supply & fix sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 22 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for including removing rubbish off the premises complete all as specified and directed. |
| 23 | Material and labour for 25mm thick cement concrete 1:2:4 type B-0, (using 12.5mm graded crushed stone aggregate) as in sub floor finishing the surface rough to receive floor tiles complete all as specified and directed. |
| 24 | M&L for screed bed or bedding layer of 15mm thick in cement mortar 1:6 for laying floor tiles etc all as specified. |
| 25 | M&L for joint free Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exc 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. (Note: Colour and pattern of tile will be decided by GE/ Engr-in-charge. Contractor will brought the tiles only after approval of colour and pattern by GE/Engr-in-charge). |
| 26 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 27 | M&L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match. (Note: Colour and pattern of tile will be decided by GE/ Engr-in-charge. Contractor will brought the tiles only after approval of colour and pattern by Ge/Engr-in-charge). |
| 28 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 for backing coat of vertical tiles complete all as specified. |
| 29 | Dismantling wall and ceiling boards of any description including cover fillets complete all as specified and directed. |
| 30 | Supply and fixed 6mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to walls etc complete all as specified and directed. |
| 31 | S&F Non Asbestos fibre cement bldg boards fixed or laid/inserted to GI/Aluminium framework with screws designer type as in false ceiling with & incl aluminium snap grid of size and fixed with hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia ,40mm long complete all as specified with allconnected accessories, fittings and fixtures complete all as specified and directed. |
| 32 | Material & labour for 2nd class hardwood plain fillets, square, rectangular or triangular in section, wrought, secured with nails having sectional area exc. 3 sqcm and n.exc 6 sqcm, complete all as specified and directed |
| 33 | Dismantling Timber scantling 40 sq cm and over in section , in any position all as specified and directed. |
| 34 | M& L for cleansawn Second class hard-wood scantlings with framed work. |
| 35 | Material and labour for preparation of surfaces of wood and wood basedmaterials new or old of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and directed. |
| 36 | Material and labour for preparation of newplywood and wood based materialsurfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 37 | M&L for screed bed or bedding layer of 20mm thick in cement mortar 1:6 for laying floor tiles etc all as specified. |
| 38 | M&L for Cement concrete type D-2, 1:2:4 (using 40mm graded agg) in foundation filling and mass concrete with complete all as specified and directed. |
| 39 | M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment with complete all as specified and directed. |
| 40 | Material and labour for 75mm thick plain cement concrete1:3:6 type C2 ( using 40mm graded crushed stone aggregate) finished even and smooth without using extra cement as in plinth protection complete all as specified and directed. |
| 41 | M&L for Cement concrete type B-2, 1:2:4 (using 40mm graded agg) in surface channels and drains |
| 42 | Material and labour for PCC 1:3 :6 type C-2 (using 40mm graded stone agg) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed. |
| 43 | Extra for forming fair finishing drain or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds stopped ends etc.complete all as specified and directed. |
| 44 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 complete all as specified. |
| 45 | M&L for preparingplastered or unplasterd newly surface of any description with three coat of white wash on walls surfaces. |
| 46 | M&L for preparingplastered or unplasterd old surface of any description with two coat of white wash on walls surfaces. |
| 47 | S&F in repairsfancy type chromium plated bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore. |
| 48 | S&F in repairs 15mm bore stop valve, fancy type, chromium plated of brass with long shank and cup, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 49 | S&F in repairs 20mm dia stop valve, fancy type, chromium plated of brass with long shank and cup, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 50 | S&F 3-layer 16mm bore PP-R polypropylene random copolymer) S&F concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threadedpolypropylene random fittings fixed complete to walls, ceilings or in floors etc. |
| 51 | S&F 3-layer 20mm bore PP-R polypropylene random copolymer) S&F concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threadedpolypropylene random fittings fixed complete to walls, ceilings or in floors etc with complete all as specified and directed. |
| 52 | Supply only sheet glass 4mm thick ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 53 | Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises all as specified and directed. |
| 54 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc |
| 55 | M&L forGreen Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types all as specified and directed. |
| 56 | Material and labour for providing cement concrete 1:2:4 type B-2(using 40mm graded aggregate ) in plinth walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) with complete all as specified and directed. |
| 57 | S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement. |
| 58 | Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete, all as specified and directed |
| 59 | S& F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour VC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing with complete all as specified and directed. |
| 60 | M&L forjoint free coloured Non - skidCeramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18Sqm each, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. (Note: colour and pattern of tile will be decided by GE/ Engr-in-charge. Contractor will brought the tiles only after approval of colour and pattern by GE/Engr-in-charge). |
| 61 | S & F in rep Vitreous China Squatting pan "Orissa pattern" size 580 x440 mm white with integral foot rest including cement concrete beddingcomplete all as specified and directed. |
| 62 | S&Fvitreous china wash hand basin white flat back of size 550mmx400 mm including CI brackets and waste pipe complete all as specified and directed (Make: Hindware/Parry). |
| 63 | S & F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float, chain and pull and brackets etc complete. |
| 64 | S&F PVC connection 15mm size with PTMT nuts, of 450mm length all as specified and directed. |
| 65 | S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 66 | M&L for Cement Concrete type C-2, 1:3:6 concrete bed to drain pipes 110mm dia including packing under, and haunching against the sides of pipes after they are laid and tested complete. |
| 67 | S&F in repairs PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl Jointing with solvent cement. |
| 68 | Dismantling of water tanks exc 250 ltrs but n. exc 500 ltrs capacity and removing to store with complete all as specified and directed. |
| 69 | S&F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 70 | S&F in repairs 20mm dia Ball brass valves/ float valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed |
| 71 | Taking down cement plaster on brick or concrete walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 72 | Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in soft /loose soil. |
| 73 | Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in soft/loose soil. |
| 74 | M&L for cement concrete type D-2, 1:4:8in Cement concrete in foundations, filling and mass concrete. |
| 75 | M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete. |
| 76 | Returning/filling in including spreading, levelling, watering and well remming in layers n.exc 25 cm in soft/loose soil. |
| 77 | Removing excavated material n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point. |
| 78 | M&L for PCC 100mm thick, type D-2, 1:4:8 (using 40mm graded stone agg) in sub-floors, sub-base, floors and pavings etc. |
| 79 | M&L for Hard core, broken to gauge n exc 63 mm using broken stone/boulders. |
| 80 | M&L for Prepairing surfaces plastered or unplastered newly surfaces with two coats of cement base paint over one coat of white wash as completed. |
| 81 | M & L for screed bed or bedding layer of15 mm thick for laying floor finishes in CM (1:6 ). |
| 82 | S&F Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed. |
| 83 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 with complete all as specified and directed. |
| 84 | S&F 32mm dia waste coupling of PTMT (half or full threaded). (Minimum weight 32mm- 45gms/40mm-60 gms) with complete all as specified and directed. |
| 85 | S & F fancy typy chromium plated 15mm dia pillar taps fancy type copper alloy with capstan heads,screwed down high pressure, with or without lettered "hot or cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 86 | S & Flooking mirror 600 mm x 450 mm bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers .(Make :Swastic /Kohinoor /Gold fish /Atul) . |
| 87 | Supply andfix chromium plated brass Bib taps,cast copper alloy with crutch or butterfly handle, screwed down for PP-R pipe for 15mm bore tubing complete all as specified and directed by Eng-in-charge. |
| 88 | S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) with complete all as specified and directed. |
| 89 | S&F PVC (SWR) bends any radius with access door, 75mm dia with complete all as specified and directed. |
| 90 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified . |
| 91 | M&L for RCC Nominal Mix type B-1, 1:2:4 (using 20mm graded stone agg) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified. |
| 92 | Mild steelTMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips with complete all as specified and directed. |
| 93 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide with complete all as specified and directed. |
| 94 | Material & Labour for Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLS), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLS)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. |
| 95 | All as per item No. 1 here in before One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size with complete all as specified and directed. |
| 96 | All as per item No. 1 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specifieddirected. |
| 97 | All as per item No. 2 here in before but for one 5 pin socket outlet 15 Amp and 5 Amp Multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified. |
| 98 | S&FSocket outlet 2 in 1, 3 pin, 5amp flush type |
| 99 | S&FSocket outlet 2 in 1, 3 pin, 5 and 15 amp flush type |
| 100 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed. |
| 101 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed. |
| 102 | Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm ,two to three terminals complete all as specified & directed. |
| 103 | Supply and fixing lamp holder, insuleted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden boardcompleteall as specified and directed. M= |
| 104 | S&F LED lamp 10 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha0.85 (min). Make- Havells/Crompton/Syska |
| 105 | Supply and fixing LED light fitting 1 x 22 Watt 220 volt AC decorative ultra slim polycarbonate LED lighting fixtures with high luminen output, enviournmental friendly, energy effecient connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed.Make- Havells/Crompton/Syska |
| 106 | Supply and fixing LED light fitting 1 x 10 Watt 220 volt AC mirror light box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed. Make :- Havells/Bajaj/Philips |
| 107 | S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed.Make- Havells/Crompton/Syska |
| 108 | Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 4 waysingle pole and neutral fixed on wall duly grouted in solid block wall or on wooden board with complete all as specified and directed. |
| 109 | Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 8 waysingle pole and neutral fixed on wall duly grouted in solid block wall or on wooden board with complete all as specified and directed. |
| 110 | S&F MCB SPN having braking capacity 10KA, 20 Amps, 240 Vcomplete all as specified and directed. |
| 111 | S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 Vcomplete all as specified and directed. |
| 112 | S&F of new generation energy saving and environmental friendly long life LED building securitylight made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site,GI bracket 32 mm dia pipe and 02 numbersclmaps, all fixing arrangements such as fastners, bilts, nuts washers etc all as specified and directed.(Make :- Bajaj /Havells/Philips) |
| 113 | S&F wire for circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed cable with multistranded copper conductor 2.5 Sqmm, on surface or recessed or drawn in PVC casing capping/PVC Pialong with 2.5 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.(Note: One RM PVC casing capping/PVC conduit ,one run of 2.5 sqmm earth wire and 2 Run of 2.5 sqmm cable shall be measured as one run.) |
| 114 | S&F 1100 volt grade heavy duty cable PVC insulated aluminum conductor served with inner sheathed of PVC tape and overall sheathed in service connections suspended by insulating hangers not morethan1 meter apart including 4 mm suspension wire, one twin core cable flat or circular multistranded 10 sqmm 2 core complete all as specified and as directed. Make :- Havells/KEI/Polycab |
| 115 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for liftingmade out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge. |
| 116 | M&L of SPN type rewireable switch fuse unit of 230 Volt 50 Hz single phase double pole of capacity 32 Amp including MS box with backelite fuse & fuse carrier fittings , operating insulated handle, top cover necessary locking arrangemnts etc as per IS/IEC 60947 1&3 including necessary wall mounting fittingduly grouted/fixed in solid block wall or on wooden board as directedincluding taking down the existing all as specified and directed. Make : INDOASIAN / L&T/Havells |
| 117 | Supplying, laying, jointing & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 volts grade,of size 16 sqmm 2 core as per IS 7098 Pt-IIlaid in trenches / ducts / encased in GI pipe / fixed to polecomplete all as directed andspecified. |
| 118 | Supply and laying galvanised tube light gradeISI marked of size 40 mm dia incl all fittingsin trenches/fixed on pole/wall/floor or laid in positioncomplete all as specified and directed. |
| 119 | Excavationin trenches in any type of soil not exc 1.5 mtrs wide and not exc 1.5 mtr in depth for laying of pipe/ cables/ poles etc and getting out hard & densile soil complete all as specified and as directed. |
| 120 | Returning fitting in any type of soil including spreading leveling watering and well ramming in layers n.exc 25 cm complete all as specified and as directed. |
| 121 | Removing excavated soils to a distance n.exc. 50 mtr and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed. |
| 122 | M & L for laying of fine, clean sand (river sand) free from sharp materials and stone particalsin trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed. Note:- The total thickness of sand shallbe measured 18 cm after punning. |
| 123 | Supply and laying un-reinforced precast.concrete cable protection cover of class LV, type-1, flat size 250mm x 150mm x 40 mm,factory madeof specified make , complete all as specified and directed. |
| 124 | S&F storage type water heater (Geyser), AC , 230 Volt, 50 Hz , capacity 50 Ltrs,5-star rating comprising copperinner tank,heatng element, thermostate with adjustable temperature setting 0-90 degree centigrade , indication lamps , provision of inlet outlet and air vent connections & NRV andPVC connection 15 mm size, heavy duty with brass nuts, 450 mm long mounteted on wallincluding all fixing arrangements such as deshfastner ,bolts, nuts & washers etc complete including making gooddisturbed wall ofsurfaces matching with the existing finishing etc complete and as directed Make - Havells /Bajaj / Recold/Venus |
| 125 | S & Fin galvanised mild steel water tubing of 15 mm dia bore in medium grade with ISI Mark and incl all fittings like bends, elbow, Tee, reducer sockets & union etc laid in trenches, under floor or fixed to walls / ceilings complete all as specified and as directed. Make : Prakash Surya / Tata /Jindal |
| 126 | S&F stop valve,cast copper alloy , CP , with long shankcup concealedT3511A1 Concealed Stop Cock 1/2” with Body of Parryware, screwed down high pressure screwed both ends for iron pipe or for unions and fixed 15mm bore(Minimum weight 15mm-90gms).Make Parryware /ESS-ESS/Jaquar/Hindware |
| 127 | S&F bib tap,cast copper alloy , CP , with long shankcup concealedT3511A1 Concealed Stop Cock 1/2” with Body of Parryware, screwed down high pressure screwed both ends for iron pipe or for unions and fixed 15mm bore.Make Parryware/Jaquar/Hindware |
| 128 | Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc) |
| 129 | Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC. |
| 130 | Taking downsub main wiring of any type and size and discription incl removal from DBs etc and removal of the same from site and making good the disturb surfaces or portion of wall/ceiling etc complete all as specified and directed by EIC. |
| 131 | S&F 1100 volt grade heavy duty cable PVC insulated aluminum conductor served with inner sheathed of PVC tape and overall sheathed in service connections suspended by insulating hangers not morethan1 meter apart including 4 mm suspension wire, one twin core cable flat or circular multistranded 6 sqmm complete all as specified and as directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
