National Handloom Development Corporation Limited-NHDC has published Construction Of Boundary Wall From Cisf New Checkpost 1 To Lt Wall, Around Cisf New Barrack, Eu Complaint Office And Store At Isps, Narmada Nagar.. Submission Date for this Tender is 20-10-2022. Wall Construction Tenders in sagar Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting ofrank vegetation, grass, brush wood,trees and saplings of girth up to 30 cm measured at a height of 1 m aboveground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 2 | Dismantling and stackingwithin 50 metres lead, fencing posts or struts including allearth work and dismantling ofconcrete etc. in base of :R.C.C. |
| 3 | Dismantling barbed wire orflexible wire rope in fencing including making rolls andstacking within 50 metres lead. |
| 4 | Earth work in excavation by mechanicalmeans (Hydraulic excavator) / manualmeans over areas (exceeding 30cm indepth. 1.5m in width as well as 10 sqmon plan) including dressing of sides andramming of bottom disposal ofexcavated earth, lead up to 50m and liftup to 1.5m, disposed earth to be levelledand neatly dressed. (No extra lift ispayable if work is done by mechanicalmeans) All kinds of soil |
| 5 | Providing and laying in position cement concreteof specified grade excluding the cost of centeringand shuttering - All work upto plinth level :M-10Nominal (Mix-1 Cement : 3 sand : 6 gradedstone aggregate ) |
| 6 | Centering and shuttering in cludingstrutting, propping etc. and removal of formfor:Foundations, footings, bases of columns,etc. for concrete upto plinth level |
| 7 | Reinforcement for R.C.C. work includingstraightening, cutting, bending, placing inposition and binding including cost of bindingwire all wastages and overlaps, couplers(overlaps shall be provided as perrequirement of IS 13920 for ductile detalingIS 456 RCC Design & SP 34 Reinforcementdetailing ) etc. complete . (Note:- 1. Spacer bars (chairs) shall be paidseparately as shown in the drawing and as perdirection of engineer in charge. 2. No extra payment shall be done foroverlaps and/or couplers. 3.Couplers shall be conforming to IS code on“Reinforcement Couplers for MechanicalSplices of Bars for Concrete Reinforcement - Specification”) Thermo-Mechanically Treated bars.(TMT/TMX) FE 500 or more conforming toIS 1786 |
| 8 | Providing and laying in position specifiedgrade of reinforced cement concrete (with20mm nominal size graded stoneaggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :M-20 Grade Concrete |
| 9 | Centering and shuttering in cludingstrutting, propping etc. and removal of formfor:Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc.Uptoplinthlevel. |
| 10 | Centering and shuttering in cludingstrutting, propping etc. and removal of formfor:Columns, P i l l a r s, Piers, Abutments,Posts and Struts. |
| 11 | Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), includingattached pilasters, buttresses, plinth and string courses, fillets, columns, pillars,posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement:M-20 Grade Concrete |
| 12 | Brick work with clay flyashbrick ( crushing strength not less than 25 kg / sq cm ) infoundation and plinth Cement mortar 1:6 (1 cement : 6 coarse sand) etc. all work complete as per work specifications, drawings and in accordance with the direction of Engineer-in-charge. |
| 13 | Brick work(flyash F.P.S. - crushing strength not less than 25 kg /sq cm) in superstructurefrom plinth level up to floor two levelinCement mortar 1:6 (1 cement : 6 coarse sand) etc. all work complete as per work specifications, drawings and in accordance with the direction of Engineer-in-charge. |
| 14 | Structural steel work in single sectionfixed with or without connecting plateincluding cutting, hoisting, fixing inposition and applying a priming coat ofapproved steel primer all complete. |
| 15 | Providing and fixing concertina coilfencing with punched tape concertina coil600 mm dia 10 metre openable length (total length 90 m), having 50 nos roundsper 6 metre length, upto 3 m height ofwall with existing angle iron "Y" shapedplaced 2.4m or 3.00m apart and with 9horizontal R.B.T. reinforced barbed wire,stud tied with G.I. staples and G.I. clips toretain horizontal, including necessarybolts or G.I. barbed wire tied to angleiron, all complete as per direction ofEngineer-in charge, with reinforcedbarbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of165 kg/ sq mm with tape (0.52 mm thick)and weight 43.478 gm/ metre (cost ofM.S. angle, C.C. blocks shall be paid separately). |
| 16 | 12 mm cement plaster of mix :1:4 (1 cement : 4 sand) |
| 17 | 15 mm cement plaster on the rough sideof single or half brick wall of mix:1:4 (1 cement : 4 sand) |
| 18 | Finishing walls by any mechanical ormanual means with Premium AcrylicSmooth exterior paint (Premiumexterior) of required shade including allscaffolding. New work (Two or morecoat applied @1.67ltr/10sqm over andincluding one coat undiluted exteriorwaterproofing coating @ 2.39 litre/10sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) |
| 19 | Painting Steel work with Deluxe MultiSurface Paint to give an even shade.Two or more coat applied @0.90 ltr/10sqm over an under coat of primerapplied @ 0.80 ltr/ 10 sqm of approvedbrand or manufacture |
| 20 | Providing and fixing on wall faceRigid Unplasticised rigid PVC (upvc)Single socketed rain water pipesconforming to IS : 13592 Type Aincluding jointing with seal ringconforming to IS : 5382 leaving 10mm gap for thermal expansion.110 mm diameter (minimum wallthickness 2.2mm) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
