Public Health Engineering Department-PHED has published Provision For Up-Gradation Of District Laboratory Bhilwara To Meet Out Nabl Requirement Under Rural Division Bhilwara.. Submission Date for this Tender is 07-10-2022. Building Repair Tenders in bhilwara Rajasthan. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter. |
2 | All kinds of soil. |
3 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth , consolidating each deposited layer by ramming and watering including lead upto 50Mtr. and lift upto 1.5Mtr. |
4 | Filling in plinth with locally available river shingle under floors including watering ramming consolidating and dressing complete including cost of shinglessand. |
5 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth level 1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size |
6 | Providing and laying in position specified grade of reinforcement cement concrete all RCC structural elements upto plinth level including curing compaction finishing with rendering in cement sand mortar 1:3 ( 1 cement : 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement level. |
7 | M20 Grade nominal mix (with graded stone aggregate 20mm nominal size) |
8 | Providing and layin in position specified grade of cement concrete for RCC Structure elements unto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement ; 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement forshuttering and reinforcement : |
9 | Walls (any thickness) including attached plasters buttresses, plinth and string courses fillets columns pillars pears abutments posts struts etc |
10 | M20 grade nominal mix (with graded stone aggregate 20mm nominal size) |
11 | beams suspended floors roofs griders having slopes up to 15 digree C, landings balconies shelves chajjas lintels bands plain window sills staircases and spiral staircases |
12 | M20 grade nominal mix (with graded stone aggregate 20mm nominal size) |
13 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , etc. up to plinth level. |
14 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members and removal of formwork for superstructure up to 4.5 mtr aboveplinth,for: |
15 | Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, beam etc. |
16 | Columns, pillars, posts and struts etc. |
17 | Providing and fabricating reinforcement using steel of IS:1786-1989 for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. |
18 | Tremo Mechanically treated bars (confirming of relevent IS Code) |
19 | Brick masonry in foundation and plinth with bricks of class designation 75 in : |
20 | Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
21 | Add extra over item No.5.1 for brick work in super structure upto third storey. |
22 | Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30CM thick wall in: |
23 | Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
24 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of : Green / Black / Other granite |
25 | Above 3601 Cm2 Slabs |
26 | Providing and fixing Ist quality standard White Ivory Glazed Tiles ISI marked [IS:13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). |
27 | Size 300x450,300x600(as per direction of engineer in charge) |
28 | Providing and Laying Vitrified Porcelain dianomate floor tile, skirting dado , 10 cm thick flooring over 20 mm thick bed mortar 1:4 mix with 2-3 mm thick joint to be filled with cemutious grauter polymer based non shrine graute of metaling colour as per required of size. |
29 | Flooring Tiles (600x600) |
30 | Extra for providing edge moulding to 18 mm thick marble stone counters, vantities etc. over item No. 7.1 & 7.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
31 | Granite work. |
32 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal, dehydreresin in glue both sides with approved steel fittings complete as per Annexure ‘A’ |
33 | Decorative Teak veener one side |
34 | 30 mm thick shutter |
35 | For External teak wood lipping on flush door |
36 | 30mm x6mm |
37 | Providing and fixing pressed steel mitred door frames manufactured from commercial mild steel sheet of 1.25 mm (16 gauge) thickness including hinges jamb, lock jamb, head and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. |
38 | Profile "C" |
39 | Providing & fixing steel glazed doors, windows and ventilators shutters of standred rolled steel section joint mitred and welded with steel 13x3mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of plain glass panes 4mm thick with copper glazing clips and special metal-sash putty of approved make, or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fittings except necessary hinges of pivots steel handles and peg stay etc. as required. |
40 | Patially fixed and partially openable fixed area not exceed 33% |
41 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150 mm distance. |
42 | Providing and fixing Square bars or other flat welded to window, ventilators etc. |
43 | Providing and fixing Tiles over Roof fixed in 25 mm thick cement mortar 1:4 bed complete |
44 | 20 mm thick terrazo tile over roofing including cutting grinding with machine complete |
45 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. |
46 | Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : |
47 | For area of each slab up to 2001 to 5000Sq. Cm : |
48 | (A) 25 mm thick slab. |
49 | Random rubble dry stone Kharanja under floor. |
50 | Applying plaster of Paris or lime putty sandala (Bhilwara Practice ) over cement plaster surface for making even surface. |
51 | Plaster on new surface on walls in cement sand mortar 1:4 including raking of joints etc. complete fine finish: |
52 | 20 mm thick. |
53 | Applying priming coat: |
54 | With ready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood. |
55 | Painting with enamel paint of approved brand and manufacture to give an even shade |
56 | Two or more coats on new work. |
57 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). |
58 | Grading roof water proofing treatment with : |
59 | Cement concrete 1:2:4 (1-Cement:2-coarse sand :4graded stone aggregate 20mm nominal size).with water proofing compound with manufactures specification |
60 | Providing & fixing anodizing alumium work (Anodizing to be got done from approved Anodizer) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS : 733 and IS : 1285 anodised transparent 81 dyed to required shade according to IS : 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gas at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required inlcuding cleat angle Aluminum snap beading for glazing/paneling, C.P. Brass/ Stainless Steel screws, Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and peneling to be paid for separately). |
61 | For shutters of sliding windows and making provision for fixing of fittings wherever required (lockes shall be paid for separately |
62 | Providing and fixing glazing in aluminium door, window, vintilator shutters and partitions etc. with PVS/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost. of aluminium snap beading shall be paid in basic item.) |
63 | with glass panes of 5.0mm thickness (weight not less than 13.75 Kg/Sqm) as per IS : 2835 |
64 | P & F kitchen & Lab Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up to floor level complete including cutting and making good the wall & floor : |
65 | 1.0mm thick salem stainless steel AISI -304 kitchen sink of approved make (Nirali, NeelKanth, Jaina, Faber, Cryistal) with large waste coupling. |
66 | Size 24x18x8 |
67 | P & F Ball Cock (IS:1703 Mark) with Rod & P.V.C. Ball complete : |
68 | Brass wt. 400 gm, 15 mm. |
69 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. |
70 | C.P. Inlet connection 15 mm Brass (IS:8931 marked). |
71 | P & F Full-way valve (IS:778 Mark) or wheel valve of approved make : |
72 | Gun-metal 20 mm nominal bore. |
73 | Gun-metal 32 mm nominal bore. |
74 | P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design. |
75 | 500 litres capacity. |
76 | INTERNAL WORK - EXPOSED ON WALL |
77 | 20 mm nominal outer dia pipes |
78 | 32 mm nominal outer dia pipes |
79 | P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant |
80 | 110mm dia |
81 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it"s accessories, round tiles,Hot Dipped Galvanized Modular Box of 20SWG with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required. Make AKG, Prestoplast, Precision, Polycab, Dauphin,Richa |
82 | Medium point (up to 6 mtr.) |
83 | Long point(up to 10 mtr..) |
84 | Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it"s accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. Make AKG, BEC, Steel kraft, MKay |
85 | On board |
86 | Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular box of 20 SWG on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet, making connection, testing, etc. as required. Make KEI, Anchor,L & T, Paramount, Empire, Orient Cab, Orbit, HPL, Unicab,SPC, Polycab, Havell"s, |
87 | P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required |
88 | 5 step fan regulator 2 Module |
89 | P & F double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. |
90 | 1200 mm sweep |
91 | P & F box type fluorescent tube fitting fabricated from CRCA sheet and finished with powder coating / stove enamelled paint complete with accessories (Low Loss Copper Choke, starter, starter seat) / Electronic Choke with terminal block duly prewired with copper conductor including making connection, testing etc. as required( without tube). |
92 | 1 X 36 Watts with EB |
93 | P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required. |
94 | Single pole MCB |
95 | 6 A to 32 A rating |
96 | 40 A to 63 A rating |
97 | P&F 240/415 V isolator conforming to IS:13947III/ IEC 60947-3 on existing board / sheet including making connections, testing etc. as required. |
98 | Double pole isolator |
99 | 63 A rating |
100 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. |
101 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
102 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
103 | Wiring for sub mains ISI marked (IS:694) 1100 Volts grade PVC insulated flat twin core sheathed solid aluminium conductor with 10 SWG G.I. Support wire duly clipped etc. as required. |
104 | 10.0 sq.mm |
105 | P & F Fluorscent tube rod in existing fixtures as required, |
106 | Flourscent powder coated (minimum 3 star rating) |
107 | 36/40 Watts |
108 | SITC of Air Cooled Cassette type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (EP foam pipe section) upto 10 Mtr (IDU to ODU), copper power cable upto 10 Mtr (IDU to ODU), R-22 Refrigerant, Remote, drain pump,suitable for 400/230V +10% of 50 Hz ,1 /3 phase AC supply capable of performing cooling, dehumidification, Air circulation, filteration & ventilation of following capacity with Scroll / reciprocating / rotary compressor as specified. |
109 | 1.0 TR with 4 star rating of BEE |
110 | 1.5 TR With 5 starrating of BEE |
111 | Supply, installation, testing and commissioning ofMNRE approved Grid tied Solar Panels with inverter, meter, cable etc. suitable for Rooftop installation as well as Utility Scale Solar Power Projects with 25 years of Linear Generation warranty. Work includes designing of solar panel area and MS frame and foundation on ground/roof of Pump house or CWR, showing arrangement of panel in available space, installation ofPV module on MS frame as per approved design and drawings. Mountingstructure shall be suitably designedto withstand wind velocity up to 150km/hr. Grid Tie Transformer less inverters, Multiple independent MPPTs, Peak efficiency of >98%. Connect up to multiple strings PV arrays, Easy & fast connection, Built-in string-level monitoring, IP65 protection level, Wi-Fi / internet based remote monitoring with 5 years warranty. All cabling up to panel and metre, earthing etc. required accessories and taxes are inclusive. The work shall be executed as perdetailedtechnical specifications, approved drawing and direction of Engineer in Charge. Note: There shall be 5 year service warranty for panel, inverter, meter, cable etc. andsuitable provision shall be included in tender document. |
112 | Solar panels more than 10 KW and up to 50 KW at a single location. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail