}

Construction Of 2 Storied Barrack ( 30 Persons Capacity ) Civil Works Etc. At Bazaricherra P.S. In Karimganj Dist. ( Shifted To Karimganj Police Reserve Permises ) , karimganj-Assam

Assam Police Housing Corporation Ltd has published Construction Of 2 Storied Barrack ( 30 Persons Capacity ) Civil Works Etc. At Bazaricherra P.S. In Karimganj Dist. ( Shifted To Karimganj Police Reserve Permises ) . Submission Date for this Tender is 12-10-2022. Barrack Tenders in karimganj Assam. Bidders can get complete Tender details and download the document.




Tender Notice

34053629
Construction Of 2 Storied Barrack ( 30 Persons Capacity ) Civil Works Etc. At Bazaricherra P.S. In Karimganj Dist. ( Shifted To Karimganj Police Reserve Permises )
Open Tender
Indian
Assam
karimganj
12-10-2022

Tender Details

Construction Of 2 Storied Barrack ( 30 Persons Capacity ) Civil Works Etc. At Bazaricherra P.S. In Karimganj Dist. ( Shifted To Karimganj Police Reserve Permises )

Key Value

Document Fees
INR 958 /-
EMD
INR 95761.0 /-
Tender Value
INR 47.88 Lakhs /-

BOQ Items

Name of Work: Construction of RCC 2 storied Barrack ( 30 persons capacity) - Civil works, Sanitary, water Supply, Site preparation etc at Bazaricherra P.S. in Karimganj District under Annual Plan 2013-14 MPF Scheme under state share. (Shifted to Karimganj Police Reserve Permises)
Sl. No. Item Description
1Surface dressing of ground including removing vegitation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil.
2Earth work in excavation for foundation trences of walls, retaining walls, footing of columns, steps, septic tanks etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in following classifications of soils including bailing out water where necessary as directed and specified. (A) Upto a depth of 2m below the existing ground level. (a) In ordinary soil.
3(B) Extra over item No. 1.1 (A) above for each 1 m depth or part thereof beyond the initial depth of 2 m.
4Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing, steps, walls, brick works etc. as directed and specified including dewatering if necessary and curing complete (Shuttering where necessary shall be measured and paid separately).(a) In prop. 1 cement: 3 sand: 6 coarse aggregate by volume.
5(b) In prop. 1 cement: 4 sand: 8 coarse aggregate by volume.
6Providing and laying 25mm thick damp proof coarse with cement concrete in prop. 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.
7Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)(I) Using Mixer Machine(A) In substructure up to plinth levelFoundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.N) Without using admixture, plasticiserb) M20 grade concrete or Prop. 1:1.5:3
8(B)In super structure from plinth level up to 1st floor level.ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing) including preparing the top surface and finishing of nosing.N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3
9Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling and removal of the same for insitu reinforced concrete and plain concrete work.(A) In sub structure upto plinth level: Foundation, footing, columns with base, tie and plinth beam, pile cape, base slab, retaining walls, walls of septic tank, inspection pit and the likeupto plinth level. (i) using 25mm thick plank.
10Sides and soffits of beams, beam hunching, cantilever, girders, bressumers and lintels and horizontal ties. (a) For depth not exceeding 1.0 M b) using 25mm thick
11Columns, pillars, posts & strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having palne vertical face.(ii) Using 25 mm thick plank.
12Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in : (1) Columns, pillars, post and strut of square / rectangular / poligonal in plan or any shape like Tee / L etc. having plain vertical face.
13Sides and soffits of beams, beam hunching, cantilever, girders, bressumers and lintels and horizontal ties.(a) For depth not exceeding 1.0 M
14Flat surface such as soffits of suspended floors, roof, landings, cantilever slabs, chajjas, balconies and the like.(a) Floors etc. upto 200mm in thickness
15Staircase with sloping or stepped soffits including risers and stringers but excluding landing.
16Providing soling in foundation and under floor at all levels with stone/best quality picked jhama bricks, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials complete.(a) Brick flat soling
17Brick work in cement morter with 1st class brick including racking out jointsand curing complete as directed.(I) In Sub-structure upto plinth level including dewatering if necessary(c) In prop. 1:5
18112mm thick 1st class brick nogged wall in cement mortar embedded with protruding rod in column including racking out joints and curing complete as directed in super structure above plinth upto 1st floor level (protruding M.S. rod/ tor steel will be measured and paid separately under relevant item of steel work)(c) In cement mortar in prop. 1:5
19Cement concrete works in topping 1:1:2 (1 cement, 1 sand : 2 graded aggregates on RCC floor , tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg of cement per sq m of floor (base concrete to be measured and paid separately) to be laid in panels including curing complete as directed.(b) 20 mm thick.
20Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.
2165 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed.
22Plain cement concrete floor base in prop 1:3:6 laid in alternatebays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick
23Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base ofcement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed.(Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above
24Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). a) Normal range Somany/ Orient/Nitco/Asian Make i) Of size 200mmx200mm and above
25Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. (A) CERAMICi)Normal range (Sizes 300 mm x 300mm and above)(a)Orient made:Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate
26Cement plaster skirting (upto 30cm height) with cement mortar (1 cement: 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor.(a) 15 mm thick
2715mm thick cement plaster in single coat on rough side of single or halfbrick wall for interior plastering upto 1st floor level including arrises and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed.A) On rough side(b) In cement mortar 1:4
28B) On fair side(b) In Cement mortar 1:4
29Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii)Super Ductile (SD) TMT reinforcement bars
30b)Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc..
31(c) I.S.I. approved M.S. Rod
32Extra over item 18.1.1(a,b,c) for each subsequent floor or part thereof above first floor level.
33Providing fitting & fixing steel windows of standard rolled steel sections as per relevant I.S Code,jointsmitredand welded with 15mm x 13mm x 100mm lugs embedded in cement concrete block of M- 10grade including providing and fixing of projecting hinges (not more than 65mm and not lesshan 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mm x 12mm sqare bars duly welded to steel frame at not more than 120mm c/c applying a priming coat of red-lead paint etc. complete asper drawinga) Openable.
34Providing fitting & fixing steel ventilators (openable) of standard rolled steel sections as per relevantI.S Code, joints mitred and welded with 15mm x 13mm x 100mm lugs emdedded in cement concrete block ofM-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2 nos. of 12mm x 12mm sqare bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing
35Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates).
36Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevant I.S. Code including oxidised iron butt hinges (100mmx75mmx3.5mm) 6Nos. With necessary wood screws.(b) Non decorative typeand block board core. (ii) 35mm thick.
37Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished)(A) Sliding door bolts(ii) 250 mm x 16 mm
38(B) Tower bolts(iii) 200 mm x 12 mm
39(C) Door handles (iii) 150 mm
40Providing plinth protection with bricks flat laid in cement mortar 1:4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.
41Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.(ii) 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.
42Earth / Sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, Forest Royalty, Sales tax and other duties & taxes as may be necessary.(b) with hill sand obtained by truck carriage including loading and un loading, and carriage to the site of work.
43(c) With river sand or silt (Predominalty non plastic) by truck carriage including loading and unloading.
44Grading roof for water proofing treatment (a) Cement Concrete (i) 1:2:4
45Providing and fixing clear sheet glass beded in putty and fixed with/without wooden beadings including necessary cutting of glass to required sizes (payment for wooden beads shall be made separately)(II) Area of glass panes exceeding 0.15 sq.m but not exceeding 0.52 sq.mb) 4.00 mm thick.
46Applying priming coat over new wood and wood basedsurfaces upto 10cm in width or girth after preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wood scrapers and sand papering and knotting.(b) with ready mixed paint-white wood primer
47Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint of approved brand and manufacture to give and even shade including cleaning the surface of all dirt, dust and other foreign materials, sand papering and stopping.(I) Surface over 100mm in width or girth. (b) High gloss (Asian paint / Berger paint/ ICI paint / J&N paint / Nerolac) paint.
48Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and externalafter removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.
49(a) Applying one coat of cement primer of approved brand & manufacture on new wall surface after thoroughly brooming the surface free from mortar droppings & other foreign matter & including preparing the surface even and sand papered smooth.
50(b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after thoroughly brooming the surfacesto remove all dirt and remains of loose powdered materials.
51Providing precast RCC slab in prop. 1:2:4 reinforced with 10 mm TMT/HYSD bars @ 150 mm centre both ways tying with 20 guage black annealed wire with necessary shuttering, curing etc. complete including fixing in position as directed. (a) 100 mm thick slab.
52Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary land compensation, Municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% duduction for shrinkage to be made from total quantity) etc. complete as directed and specified, including forest royalty within a distance of 8.00 km. (forest royalty shall be reimbursed on production of necessary certificate from the forest authority duly counter signed by D.F.O. concerned). (b) Other than Guwahati city
53ProvidingSUN ROCK HIGH CST/ DEVI paver block/ tiles of concrete grade M30 or above of approved quality, size shape of specified thicknessover a levelling bedding layer of 30mm compected sand over a base course of WBM or PPC (base course to be paid saperately) inculding cutting where necessary finished with spreading, sweeping jointing sand and compacting the pavers using vibrating compector as specified and directed. SUN ROCK HIGH CTS Tiles (Pavers)(a) 80 mm thick
54Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed.b) Using other ISI marked approved circular hollow section
55Providing Pre Painted Galvanized IronSheetRoofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick
56Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing)at all levels including fitting and fixing self drilling, self tapping screws complete complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick
57Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete.
58SANITARY & WATER SUPPLYWORK Providingfitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately)Indian type W.C Orissa pattern of size 580 x 440 mm b) Coloured ii) Hindware make
59Supplying, fiting and fixing PVC flushing cisternwith all internal fittingswith CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) ii) Hindware makeb) Coloured(i) Sleek+ PVC cistern
60Providing vitreous Chinawash basinwith CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately)::Basin (without pedestal)(B) Hindware Make(a) White(iii) Viking 550 x 400 (Cat.No.10008)
61Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified.
62Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (ii) Agmeco Make (a) Cubin (Cat. No.CB-00102)
63Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISIapproved including joining ,fitting and fixing wiyh clamps etc.as necessary completeat all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia
64(iv) 75 mm dia
65Supplying fiting and fixing 87.5 degree PVC bendwith doorof (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia
66Providing fitting and fixing PVC cowel of ISI make completeas directed and specified. (v) 63mm dia. PVC cowel of ISI make
67Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table.
68Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed.
69Supplying fitting and fixing G.I. pipes of following sizes, with all necessary approved G.I. fitting such as bend, tee, eibow reducer, nipple, plug, long screw fitting H.W. clamps etc. complete at all level including below G.L. as directed and specified.(A) Exposed on walls(d) 25mm dia (i) Using TATA (Medium)
70(ii) Concealed by chiselling or breaking brick wall C.C. / RCC and making good to the damages. (f) 15 mm dia (i) Using Tata (Medium)
71Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified ( G.I. & C.P. pipes will be measured separately)(I) Essco make (Delux/Sumthing spl./Tropical) (b) Long body bib cock with wall flange
72Supplying and fitting ball valve as specified and directed.(a) 25mm dia (Gun metal)
73Supplying fitting & fixing chrome plated (C.P) stop Cock of approved brand and size as mentioned below a below as directed and specified (G.I & C.P pipes Will be measured and paid separately).(I) Jaquar(a) Continental / Clarion(ii) 15mm dia( Angular stop cock with long thread )
74Supplying fitting & fixing CP pillar cock of 25mm dia of approved brand as specified and directed.(I) Sona make (d) Heavy type
75Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately)a) Continental(i) Shower arm 190mm long light body with wall flange
76EXTERNAL WATER SUPPLY : Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department .x) Bore hole of 150 mm diameter
77Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department.G.I. pipeSUPREME /PRINCE / FUSION /SFMC Brand v) 110mm diameter
78Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. A) G.I. pipe a) TATA / SAIL (Medium)socket should be welded to the pipes. ii) 32mm diameter
79Supplyingfitting and fixing GI filter 2.00 metre long.
80Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained
81Flushing, clearing, washing and watering of the tube well
82Supplying fitting and fixing iron removal filter filling with treated sand, pebbles, manganishdioxide and other required materialsof various filtration rate per hour of DOLPHIN make with all necessary fittings such as valve,bib cock,pipe connection etc.with a free maintanance period of six months. (A) With Zoloto fittings. (II) 2000 liters capacity (a) 4 mm thick Vessel
83Supplying and Installation of 1.5 H.P. Crompton Greaves Single phase Pump Submersible Pump Set including necessary Cable for underground and overground. Panel Board as directed by the Department.
84Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes 1000 litre capacity (a)Sintex make
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail