}

Provision Of Work Services For Improvement Of Security Infrastructure At Af Stn Gwalior, gwalior-Madhya Pradesh

Military Engineer Services-MES has published Provision Of Work Services For Improvement Of Security Infrastructure At Af Stn Gwalior. Submission Date for this Tender is 20-10-2022. Antivirus Software Tenders in gwalior Madhya Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

34043701
Corrigendum : Provision Of Work Services For Improvement Of Security Infrastructure At Af Stn Gwalior
Open Tender
Indian
Madhya Pradesh
gwalior
20-10-2022

Tender Details

Provision Of Work Services For Improvement Of Security Infrastructure At Af Stn Gwalior

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 28-Sep-2022 Corrigendum to BOQ BOQ 13-10-2022
2 08-Oct-2022 Corrigendum of Conditions Other 13-10-2022
3 13-Oct-2022 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 20-10-2022

Key Value

Document Fees
INR 500 /-
EMD
INR 86300.0 /-
Tender Value
INR 43.11 Lakhs /-

BOQ Items

Name of Work :PROVN OF WORK SERVICES FOR IMPROVEMENT OF SECURITY INFRASTRUCTUREAT AF STN GWALIOR
Sl. No. Item Description
1Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.
2M&L for PCC1:2:4 type B-1 (using 20 mm gradedstone aggregate) as in column, pillars piers posts and struts etc concrete etc complete all as specified.
3Formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc;for fair finished surfaces.
4S&F,mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, running bars, for chain link fencing including embeding in concrete and similar work conforming to Fe-290 Gde E-165complete all as specified and directed
5S&F Pre-painted galvalume aluminium zince coating GI based semi corrugated steel sheet 0.50 mm thick of an approved colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed by Engineer-in Charge.
6Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 5cm and not exceeding 10cm long and dia of bolt etc, complete all as specified and directed
7S&F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rail straining bolt, including, typing at crossing with and provision of galvanised mild steel wire, staple or steel pins etc as directed
8Dismantling, Transportation,Lifting and Fixing only Galvanized concertina wire of coil dia any sizeblade thickness any size, blade lenth any size ,wire thickness any size and stretch ability up to 8M complete all as specified and as directed. Note : Concertina wire shall be provided by the AF authorities.
9M&L, two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth.complete all as specified and directed
10Demolition of PCC in ground floor & pavings (including floor tile ) n.exc 15 cm thickness below or above GL, including removing excavatedmaterial upto 2.5 KM distance and depositing where as directed, complete all as specified and directed.
11Cutting opening in reinforced cement concrete walls (reinforcement is cut throgh) any description for door/window and other openings (with or without reveals) or enlarging existing opening, including trimming surfaces to receive rendering etc complete all as directed
12Dismantling floor hearth or wall tiling including cement mortar bedding & removing serviceable material to store and rubbish off the premises complete all as specified anddirected.
13M&L, for 25 thick PCC 1:2:4 type B-O using 12.5 mm gradred stone aggregate as in levelling course finished even an fair complete all as specified anddirected.
14M&L for non skid colouredceramic floor tiles7- 8 mm thick (square/ rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over 15mm thick screed bed in CM (1:6 )complete all as specified and directed.
15M&L for non skid colouredceramic floor tiles7- 8 mm thick (square/ rectangular) area of each tiles exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over 15mm thick screed bed in CM (1:6 )complete all as specified and directed.
16M&L for glazed ceramic tiles 450x300 x 6-7mm thick coloured on vertical surfaces such as skirting/dados etc,set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles overrendering 10 mm thick in CM 1:3 on wall complete all as specified and directed.
17Taking down cement plaster on brick or stone wall etc incl racking out joints hacking for key & scrubbing down with water etc. complete all as specified and directed.
18M&L for brick work with sub class "B" bricks old size, straight or curved on plan exc 6M mean radius built in CM 1:6 including demolition of brick work built in cement motor of any description complete all as specified and directed by the Engineer-in-Charge.
19M&L for rendering 15 mm thick on fair faces of brick wall with mixing WPC as per manufacture direction by wt of cement finished fair & even in CM 1:4 complete all as specified and directed.
20M&L forrendering 5 mm thick in CM 1:4 on concrete surfaces as on ceiling finished even and smooth without using extra cement complete all as specified anddirected.
21M&Lpreparation of newly plastered surfaces of walls and applying one coat of primer two coats of oil bound distemper, over 3mm thick wall care putty on walls complete all as specified and directed.
22M&Lpreparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.
23M&Lpreparation of newly plastered surfaces of walls and applying two coat weather proof (ACE paint from Asian paint/Berger paint/Shalimar paint) exterior emulsionpaintover one coat of suitable primer on external wall surface over 3mm thick wall care putty on wallscomplete all as specified and directed.
24complete removal of existing treatment from old decorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, mass and effloresent salts and treating out greasy spots and applying two coat of oil emulsion distemper on old decoratedsurface of wall over 3mm thick wall care putty etc, complete all as specified and directed.
25M&L for removal of complete existing treatment from old deoreted surfaces of walls and applying JK/Birla white wall care putty over a coat of suitable primer on old surface of wall to make the surface even and smooth inculding cutting of groves in putty at its old position, rubbing//sanding of the to the entire satisfaction of Engineer in Charge.with sand paperand applying two coat weather proof (ACE paint from Asian paint /Berger paint /Shalimar paint) exterior emulsionpaintover one coat of suitable primer on external wall surfaces complete all as specified & directed
26Demolition of stone slab and tiles laid bedded and pointed in any mortar orany description or thickness in floor and aprons etc complete all as specified and as directed.
27M&L in repairs Granite of 18mm to 20mm thick (of any type) work (table rubbed/moulding and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including over and 20mm screed bed in CM 1:4 all as specified and directed.
28Dismantling ofasbestos cement (corrugated, semicorrugated, etc.) sheets in roof coveringscomplete all as specified anddirected.
29Dismantling wrought iron or mild steel work of any descriptionnot otherwise provideed etc all as specified.
30Excavating in post holes in soft/loose soil (or simlar holes) each n. exc 0.5 Cum getting out, retruning filling in and ramming earth or brokem rubble mixed with earth around in layers not exceeding 25 cm complete all as specified anddirected.
31S&F Pre-painted galvalume aluminium zince coating GI based semi corrugated steel sheet 0.50 mm thick of an approved colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed by Engineer-in Charge.
32S&Fmild steel as in Roof trusses (framed), trussed,purlins, rafter, crane gantries, rails and fastenings and heavy bracketframing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats,gusset and bearing plates etc. complete all as specified anddirected.
33S&F HPSC pre-prime non asbestos fiber cement building board (E-classic) decorative finish fixed to aluminum or MS galvanised snap grid frame work with hold down clips in ceiling complete all as specified and directed.
34S&F suspended false ceiling grid system 600 x 600 mm with main runner 32 x 24 x 0.8 mm, cross tee 26 x 24x 0.80 mm and wall angle 22.2 x 22.2 x 0.65 mm in ceiling suspended @ 1.2m c/c both way with 1.60 mm dia GI wire fixed with steel dash fasterers or from purlin of roof with butterfly clips hold down etc, complete (main runner/ cross tee / wall angle of MS powder coated) as per manufacturere instruction complete all as specified and directed.
35Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/ Hard soil etc complete all as specified anddirected.
36M&L hardcore of gauge n exc. 63mm broken stone , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc, complete all as specified anddirected.
37M&L for PCC1:4:8 type D-2 (using 40 mm gradedstone aggregate) as in foundation filling,mass concrete etc complete all as specified anddirected.
38M&L for Plain cement concrete 100 mm thick, 1:2:4, type B-2(using 20 mm graded stone aggregate) and finishing the surface even and smooth without using extra cement as in flooring/hard standing/paving complete all as specified and as directed.
39M&L Forming contraction (Dummy) joints 100 mm deep x 10 mm wide, filled with sealing compound of grade A complete all as specified and as directed.
40S&Fincludingfabricating of aluminium powder coated having minimum thickness of powder coating 50 micron fordoor / window/ ventilator frame, shutters & partition including necessary joining cleats, glazing clips, aluminium snap beading having minimum wt 100gm/RM, rubber neoprene gasket, screws, dash fasteners, rawel plug for fixing of screw in wall or flooretc., aluminium sections as approved by GE complete all as specified and directed.
41Supply only6.3 mm thicksheet glass ordinary quality frosted on one sid for aluminium doors and fully glass partition in squaresexceeding 0.50 Sqm in each pane etc,complete all as specified.
42S&F powder coated anodised Aluminium grillswith aluminium frame fixed with stainless steel screws in windows/ventilator, openings etc, complete all as specified.
43M&L for 9 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber or almn frame work etc complete all as specified and directed.
44S&F fancy type decorated PVC sheathed GI curtain hanging rods 20 mm dia including brackets, including fixing arrangement and making up repair work and all fitting complete all as specified and directed.
45S&F in repairs vitreous China WC pan pedestal pattern white (excludingflushing cistern and flush pipe) but incl & connecting to trap set & concrete for making good to floor incld Seat linced cover of Vitreous china, pedestal pattern water closet including mild steel CP hinges complete all as specified anddirected by Engr-in-charge.
46S&F in repairs seat cover of Vitreous china, pedestal pattern water closet including mild steel CP hinges complete all as specified anddirected by Engr-in-charge.
47Supply and fix in repairs ofPVC flushing cistern 10 ltr capacity valve less symphonic action type low level with and incl ball valve float & handle, waste pipe & fixing accessories to wall complete all as specified and directed.
48S&F in repairVitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, waste pipe and PVC waste coupling and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed.
49Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal from sitecomplete all as specified andasdirected.
50All as per item above but 20mm bore.
51M&L for re-fixing of old steel GI tubing, 15mm bore and connections in new or old position (walls, ceiling, floors etc) with and including all new fittings complete all as specified andasdirected.
52All as per item above but 20mm bore.
53S&F GI tubing 15mm dia bore medium grade with and including all fittings and fixed to wall, floor and ceiling etc complete all as specified andasdirected.
54All as per item above but 20mm bore.
55S&F in repair Brass chromium plated hand faucets with flexible pipe length not less than 1.00 (minium) fixed for EWC/IWC suitable for 15mm bore pipe complete all as specified anddirected.
56S&F in repair fancy type angle/stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.
57S & F in repair Bib taps, 15 mm dia, cast copper alloy, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.
58S & F , fancy type pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "hot" or "cold"with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and as directed.
59S&F, rotational mounded polythene water storage tank of capacity 1000 liters (Cylindrical /vertical with close top) double layer construction fixed in position incld dismantling of old PVC tanks complete all as specified anddirected.
60Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each complete all as specified anddirected.
61Taking down chowkats or frames with shutters(without taking offshutters from frames) areanot exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work & removing from site etc complete all as specified and directed by Engineer-in Charge.
62S&F solid PVC door frame of size 50mm x 47 mm made out of 5mm PVC sheet with wood grains printed on if reinforced with MS square tube incl 75mm long MS screws for fixing to walls all as per specified in SSR. complete all as specified and directed.
63S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel’ having a PVC sheet strip’ of 20mm width stuck inside with solvent cement for stiles and both side prelaminated PVCsheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the fame at site as per specification & drawing. complete all as specified and directed.
64S&F in repairs of fancy type overhead shower with arm swivel joint chromium plated screwed down 15mm bore Make- Plumber/ Jaquar (ESSCO) or requivalent as approved by GE.
65S/F for looking mirrorsize exc 0.60 Sqm & n"exc 1.00 Sqm with 5.5 mm thick,sheet glass selected quality, fixed on wall with screws & necessary fixing arrangement including rounding/ chemfering of glass edges etc complete all as specified & directed.
66S&F corner galss shelf 8mm thick(chrome finish) fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed
67S&F high quality plastic bathroom cabinet of size 550 x 342 x 125mmconsisting front looking mirror and four to five inner compartments fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed
68Excavating in trenches not exc 1.5 m wide and not exc 1.5m in depth fordrains in soft/loose soils complete all as specified anddirected.
69Removing of excavated material (Soils) to a distance up to 3km complete all as specified anddirected.
70Returning, filling, including spreading, levelling, watering and well ramming in layers not exc 25 cm.Complete all as specified and directed.
71M&L Cement concrete type B2, 1:2:4 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified anddirected.
72M&L fair finished flat Form work to RCC Chajjas,fins facia, para pets and similar items including edges complete all as specified anddirected.
73M&L Reinforced Cement Concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in slab supported on walls, beams fins, facia, parapets, railings, chhajjas, deck slab and in shelves etc complete all as specified and directed. Note : Reinforcement shall be measured and paid separately.
74M&L, for TMTsteel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed.
75Material and labour for point wiring for one light /fan/Exhaust fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed PVC conduits (Medium grade) of size not less than 20 mm dia all as directed with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with laminated top sheet of 3 mm thick for housing of switchws, sockets, regulators etc including all accessories andusing 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. NOTE :-(I) The portion of point wiring at ceiling shall be in surface PVC conduit/ casing & caping of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii)Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A". (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thicklaminated sheet fixed with suitable brass screws and cup washers
76Description same as per above but,point wiring for 5 pin switch socket outlet combination, 5/6 Amps on independent board.complete all as specified and directed..
77Description all as per item No 2.01above but point wiring for one5 pin socket outlet,on same board .
78Description same as per Srl item No 2.01above but,point wiring for one six pin switch socket outlet combination, 15 Amps & 5 Amp (independent) with using 2.5 Sqmm (nominal area) stranded copper conductor and2.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed.
79M & L forswitch flush type single pole one way 5 Amps, 240 volts, white ivory finish complete all as specified and directed.
80M&L for socket outlet 2 in 1, 5 pin, 6 Amps flush type white ivory finish complete all as specified and directed.
81S&F switchsocket combination multi purpose, 5 Pin 6 amps, flush typeWith Indicator complete all as specified and directed.
82S&F switchsocket combination multi purpose, 6 Pin 6/16 amps, flush typeWith Indicator complete all as specified and directed.
83M&L for ceiling rose surface Bakelite two to three terminal, 18 x 50 mm complete all as specified.
84M&L for lamp holder insulated body with back plate for batten fitting complete all as specified and directed.
85Supply and Fixing step type electronic fan regulator single phase ,230 volt, 100/120 watt complete all as specified and directed.
86Supply & Fix for decorative slim linear LED tube light fitting 01x20 watt light with co extruded polycarbonate body, environmental frendly, energy efficient ready to use pack with all accessories including 01 No 20 watt tube rod and connecting the same to ceiling rose with using copper conductor 24/0.20 flexible PVC sheathsd and fixing arrangement for fixing the light fitting to wall/ roof surface complete all as specified & directed by Engineer in-charge
87S&F in replacement 35/36W LED recess softline luminaire suitable for armstrong/grid ceiling with high brightness SMD LEDs as light source, environmental friendly, new generation, aesthetically designed, ultra Slim recess mounting luminaire with fixture size 600x600mm complete with LED tube and allaccessories specified and directed. Make :Havells /CG/Philips
88S&F LED mirror light complete with high output diffuser 2 feet 10 watt 220V AC decorative type all as specified and directed by Engr - in Charge. Make : Havells /CG/Philips
89Dismaintling & Taking out MCB DBs VTPNany size , any type and capacity complete all as specified and directed.
90Supply and fixing of sheet metal enclosure Double door for DB’s 8 way 240 volts with 200 Amps rated bus bar for single phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires all as directed. Make :- Havells/Schneider/ABB/L&T
91Dismaintling & Taking outMCB"s/Isolator & metal clade box any size , any type and capacity complete all as specified and directed.
92S&F MCB single pole 6 to 30 Amps, "B" series10 KA ,240 Volts complete all as specified.Make :- Havells/Schneider/ABB/L&T
93S&F MCB Single pole and neutral 40 to 63 Amps, "B" Series240 Volts complete all as specified.Make :- Havells/Schneider/ABB/L&T
94Disconnecting& taking up or down unserviceable sub main wiring of aluminium/Copper conductor with two run of single core cable and one run of single core earth cable of any description, any size & in any position including taking out existing conduits of any description and making good the disturbed surfaces to the existing surfaces all as specified and directed. (NOTE:Two run of single core PVC cable with one run of earth conductor shall be measured as one unit.)
95M&L for sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 6.0 Sqmm of voltage rating upto and including 1100 Volts grade in and including conceled PVC conduit, med grade of size not less then 25 mm bore along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductorof size 6.00 Sqmm as earth continuity conductor all as specified and directed.(NOTE :(i) Two run of single core PVC cable with one run ofearth conductor and conduit shall be measured as one unit.) (ii) The quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface
96M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB of capacity 20 Amps, 240 Volts complete fixed on wall by provisioning of suitable sizes of MS strips, nuts, bolts and washers taking down of AC boxall as required and directed by Engineer-in-Charge.
97M&L for earthing complete with MS Galvanised earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level)with top edge of plate not less than 1.5 mtr below normal ground level including necessary excavation, earth work ,charcoal, salt etc and connected to GI earthing lead wire 4 mm dia by means of GI bolt nuts check nuts washers etc and 20 mm dia GI light grade watering pipe with funnel, wire mesh etc including PCC (1:3:6) type C-1 using 20 mm graded stone aggregate earth pit with 40x40x6 mm mild steel angle iron frame, RCC cover (1:2:4) type B-0, 50 mm thick reinforced with 8 mm dia round bar @100 mm centre to centre both ways with mild steel handle 12 mm dia, plastering 12 mm thick in cement mortar (1:6) internally and upto 150 mm below ground level externally, and GI earth lead wire 4 mm dia and 15 mm dia GI protection pipe medium grade from earth plate to test point upto 7.5m length all as shown in electrical plate No 3 of SSR Part -I 2009 and connected to earth test point including testing completeall as specified& directed.
98S&F Ceilling fans complete with blade ,down rod s electronic regulator and accessories ,230V ,1200mm sweep Min air delevery 210 CFM with service value 6.00 BEE. Five satr rated with brushless direct current motor complete all as specified and directed. Make: Havells BLDC/ CG/ Bajaj
99Supply, fixing and testing wall fan of 400 mm sweep Platina Model (High Speed)with step type regulator and connecting up including provn of three core flexible cable of size 1.5 Sq mm copper wire from ceiling rose to connector of fan of length 0.5 Mtr complete all as specified and directed.Make: Havell"s/Bajaj/CG
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail