}

Repair And Renovation Of Community Toilet At Sub Divisional Hospital ( 3 Nos. Of Male Latrines, 3 Nos. Of Urinal And 3 Nos. Of Female Latrines ) Within Ward No. Iv Under Kalimpong Municipality , kalimpong-West Bengal

Urban Local Bodies has published Repair And Renovation Of Community Toilet At Sub Divisional Hospital ( 3 Nos. Of Male Latrines, 3 Nos. Of Urinal And 3 Nos. Of Female Latrines ) Within Ward No. Iv Under Kalimpong Municipality . Submission Date for this Tender is 22-09-2022. Toilet Bathroom Tenders in kalimpong West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

33964071
Repair And Renovation Of Community Toilet At Sub Divisional Hospital ( 3 Nos. Of Male Latrines, 3 Nos. Of Urinal And 3 Nos. Of Female Latrines ) Within Ward No. Iv Under Kalimpong Municipality
Open Tender
Indian
West Bengal
kalimpong
22-09-2022

Tender Details

Repair And Renovation Of Community Toilet At Sub Divisional Hospital ( 3 Nos. Of Male Latrines, 3 Nos. Of Urinal And 3 Nos. Of Female Latrines ) Within Ward No. Iv Under Kalimpong Municipality

Key Value

Document Fees
Refer document
EMD
INR 11802.0 /-
Tender Value
INR 5.90 Lakhs /-

BOQ Items

Name of Work:Repair and Renovation of Community toilet at Sub Divisional Hospital (3 nos. Of male latrines, 3 nos. of urinal and 3 nos. of Female latrines) within Ward No. IV Under Kalimpong Municipality(Civil works part A)
Sl. No. Item Description
1Labour for laying 150 mm. to 200 mm. boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth.
2Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. River bazree
3Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
4125 mm. thick brick work with 1st class bricks in cement mortar (4:1) in ground floor.
5Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor).With 4:1 cement mortar. 15 mm. thick plaster
6(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface : With super gloss (hi-gloss) -(iv) Two coats (with any shade except white)
7(b) On steel or other metal surface :With super gloss (hi-gloss) - iv) Two coats (with any shade except white)
8Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) b)Normal acrylic emulsion
9Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer"s specification) including cleaning and smoothning of surface. Two Coats
10Iron door handle of approved quality fitted and fixed complete:.
11Supplying, fitting & fixing 1st quality Ceramic tiles in wallsand floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.Light Colour.A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m. (a) Area of each (a) Area of each tile upto 0.09 Sq.m. (i) Coloured decorative
12(B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative
13Iron door handle of approved quality fitted and fixed complete:.100mm x 5mm.
14Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
15Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx)
16Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)
17Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm
18Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989/ 1970 and I.S. 1729/1964 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessay jointing materials and painting two coats to the exposed surface with approved paint complete.With valamoid joints including sealing with sand cement mortar(4:1) upto quarter depth. 150 mm dia. (internal)
19GST, as applicable @12%
20Labour welfare cess @1%
21Electrical works
22Non Schedule A
23Non Schedule B
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail