Military Engineer Services-MES has published Addn/Altn Of Four Watch Towers Around Depot Perimeter Of 2 Mtn Dou And Certain Revenue And Minor Works At Dinjan Mil Station. Submission Date for this Tender is 08-09-2022. wrist watch Tenders in dinjan Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 01-Sep-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-09-2022 |
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 2 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depthfor foundation, or for shafts, wells, cesspits, manholes, pier holes, or laying of cables, poles, etc area not exceeding 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed. |
| 3 | Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed. |
| 4 | Removal of surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed. |
| 5 | Excavation in post holes (or similar holes) each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or brokenrubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surfaces in soft/loose soil complete all as specified and as directed. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 7 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 8 | M&L forhardcore of brocken stone/brick of gauge not exceeding 63 mm, deposited, spread, and leveled in layers not exceeding 15 cm thick, watered and rolled / rammed to a true surfaces complete all as specified and as directed. |
| 9 | M&L for PCC , type D2 (1:4:8), (using 40mm graded broken stone aggregate) as in foundations,filling and mass concrete, sub base of floor, pole etc complete all as specified and as directed. |
| 10 | M&L for PCC , type C2 (1:3:6), (using 40mm graded broken stone aggregate) as in foundations in post hole,filling and mass concrete complete all as specified and as directed. |
| 11 | M&Lfor 100mm thick PCC, type C2,(1:3:6),(using 40mm graded broken stone aggregate) as in floor laid in panels, and finished top even and fair without using extra cement complete all as specified and as directed. |
| 12 | M&Lfor 100mm thick PCC, type D2,(1:4:8),(using 40mm graded broken stone aggregate) as in sub base etc complete all as specified and as directed. |
| 13 | M&Lfor 40 mm thick, PCC (1:2:4), type B-1(using 20mm graded broken stone aggregate) as in floor laid in panels, sub base or sub floor and finished top even and fair with using extra cement complete all as specified and as directed. |
| 14 | M&L for precast cement concrete (1:2:4), type B1,(using 20 mm graded aggregate) as in landings, cover slabs of manhole, septic tank etc, and similar articles with plain faces set in cement mortar 1:4 including necessary formwork, moulds etc and incl taking out/removal of existing unserviceable cover slab from manhole /septic tank complete all as specified and as directed Note : Reinforcement shall be measured and paid separately. |
| 15 | M&L for RCC (design mix), type M-25, (20 mm graded agg) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 16 | M&L for RCC (design mix), type M-25, (20 mm graded agg) as in chajja etc complete all as specified and as directed. |
| 17 | M&L for RCC (design mix), type M-25, (20 mm graded agg) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 18 | M&L for RCC (design mix), type M-25, (20 mm graded agg) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 19 | M&L for RCC (design mix), type M-25, (20 mm graded agg) in column, pillar, piers, post and struts complete all as specified and as directed. |
| 20 | Formwork tosides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work complete all as specified and as directed. |
| 21 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc rough finished flat surface of concrete complete all as specified and as directed. |
| 22 | Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed. |
| 23 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough finished flat surface of concrete complete all as specified and as directed. |
| 24 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping) complete all as specified and as directed. |
| 25 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide complete all as specified and directed. |
| 26 | S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 27 | S&F for mild steel TMT bars 6 mm and over upto and incl 10 mm dia for stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 28 | S&F for mild steel TMT bars 6mm to 8mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 29 | Demolition of brickwork or stone/ boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 30 | M&L for brick work with sub class "B" bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed. |
| 31 | M&L for brick work with sub class "B" bricks, straight or curved on plan to any radius, built in cement mortar (1:4) as in half brick thick walls complete all as specified and as directed. |
| 32 | M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:6) including finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 33 | M&L for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces in cement mortar (1:4) including finished the surface even and fair complete all as specified and as directed. |
| 34 | M&L for rendering 10mm thick offair faces of brick work or concrete surfaces in cement mortar in (1:6) andfinished even and fair complete all as specified and as directed. |
| 35 | M&L for rendering 5 mm thick in cement mortar (1:3) on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 36 | M&L for coloured glazed ceramic tiles of size 450X 350X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in vertical surfaces such as dado/skirting and facea of side bldg. including 10 mm thick backing coat of cement mortar in (1:4)complete all as specified and as directed. |
| 37 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified and as directed. |
| 38 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified and as directed |
| 39 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed or bedding layer of cement mortar in (1:4) for laying floor finishes complete all as specified and as directed. |
| 40 | M&L for chequered cement concrete tiles of size 20cm x 20cm x 25mm thick, as in floors etc,including 15 mm thick screed bed in cement mortar (1:6) and set & jointedin neat cement slurry and pointed in grey cement and pigments to match with the shade of tiles complete all as specified and as directed. |
| 41 | M&L for 75 mm thick,plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection/ hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand (1:2) complete all as specified and as directed. |
| 42 | S&F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 43 | S&F for factory made solid panel PVC door shutter, 30 mm thick (style) consisting of frame, made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR Part II 2020 complete all as specified and as directed. |
| 44 | S&F for 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed. |
| 45 | S&F for 200 mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and as directed. |
| 46 | S&F for 125 mm size aluminium anodised handles, cast type complete all as specified and as directed. |
| 47 | S&F for anodised aluminium windows/ventilator sliding shutter, three track way type without sash bars, alumimium sections weighing 0.55 Kg/m including necessary joining cleats, glass clips, rubber packing,anodised aluminium snap beading, screws, anodised aluminium fittings, such as peg stays, 150mm long (1 No) hinges type B-21, 100mm long (2 Nos) suitable handle, with complete accessories including glass, wire mesh, anodised aluminium frame (chowkat) complete all as specified and as directed. |
| 48 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and as directed. |
| 49 | S&F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 50 | S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note : Colour of ridges shall be same colour as that of sheet used for roof. |
| 51 | S&F for mild steel screw bolts of 5 to 10mm dia of shank (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of boltexceeding 5cm long and not exceeding 10cm long complete all as specified and as directed. |
| 52 | S&F for mild steel screw bolts of 11 to 15mm dia of shank (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of boltexceeding 10cm long and not exceeding 15cm long complete all as specified and as directed. |
| 53 | S&F for mild steel screw bolts of 16 to 20mm dia of shank (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of boltexceeding 15cm long and not exceeding 22.50 cm long complete all as specified and as directed. |
| 54 | S&F for rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to FE - 290 (Gde-165), complete all as specified and as directed. |
| 55 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. |
| 56 | M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed. |
| 57 | M&L for preparation new external surfaces of wall, chajja, facia etc and applying two coats of water based acrylic weather proof exterior emulsion (exterior wall finish) paint over a coat of primer as per manufacturer"s instruction complete all as specified and as directed. |
| 58 | M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed. |
| 59 | M&L forpreparation of new plastered surface of walls etc and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed. |
| 60 | M&L for preparation of new plastered surface of walls etc and applying two coats of distemper oil emulsion over a coat of primer including 2mm thick wall care putty complete all as specified and as directed. |
| 61 | M&L for preparation of new plastered surface of walls etc and applying three coats of white wash complete all as specified and as directed. |
| 62 | M&L for preparation of new plastered surface of ceiling etc and applying three coats of white wash complete all as specified and as directed. |
| 63 | S&F for 15 mm bore, steel tubes, galvanised, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete all as specified and as directed. |
| 64 | S&F for 20 mm bore, steel tubes, galvanised, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete all as specified and as directed. |
| 65 | S&F for 15 mm bore dia bib taps, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 66 | S&F for 15 mm bore dia stop valves (concealed type), chromium plated cast copper alloy, fancy type,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 67 | S&F for 15 mm bore dia stop valves, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 68 | S&F for 15 mm bore dia pillar taps, chromium plated, cast copper alloy, fancy type, with capstan heads, screwed down high pressure, with or without lettered "Hot" or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed. |
| 69 | S&F for PVC connections 15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed. |
| 70 | S&F for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 71 | S&F for PVC low level flushing cistern, 10 liter capacity, valveless, symphonic action type with inlet, ball valve, float and handle incl bracket, PVC connection pipe andflush pipe of polyethylene of low or high density complete all as specified and as directed. |
| 72 | S&F for tubular towel rail, 20mm dia, D-type, 60cm long brass chromium plated between flanges complete all as specified and as directed. |
| 73 | S&F for vitreous china wash hand basin white flat back size 550x400mm excluding taps, waste chain and plug and porcelain stopper including cutting for and pinning in ends of brackets or erecting stand(exclusive of fixing of supply and waste pipe) complete all as specified and as directed. |
| 74 | S&F for vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), (excluding flushing cistern, flush pipe and waste pipe)including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed. |
| 75 | S&F for semi-pedestal pattern (Anglow-Indian type), vitreous china water closet pan, white, with "P" or "S" trap, including flushing pipe, etc complete and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with the existing including taking down the existing old one complete all as specified and as directed. |
| 76 | S&F for health faucet cast copper alloy with push button flexible steel pipe with PVC lining of 1mtr long suitable for 15mm dia of pipe complete all as specified and as directed. |
| 77 | S&F for plastic water closet seat, black, closed pattern with recessed bottom and cover and mild steel chromium plated hinging device complete all as specified and as directed. |
| 78 | S&F for stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed. |
| 79 | S&F for grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed. |
| 80 | S&F for 32mm dia waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms /40mm-60 gms) complete all as specified and as directed |
| 81 | S&F for swivel shower of PTMT 15mm bore (minimum weight 40 gms) including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (minimum wt 40 gms) complete all as specified and as directed. |
| 82 | M&L for plain cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete for 150 mm bore drain pipes complete all as specified and as directed. |
| 83 | M&L for salt glazed stoneware drain pipes 150mm internal dia grade "A" laid in trenches and jointed complete all as specified and as directed. |
| 84 | S&F for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 ltrs hoisted and fixed in position all as specified in SSR Part-1 including dismantling water tank and removing to store complete all as specified and as directed. |
| 85 | S&F for 20 mm bore dia of pipe, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight20 mm - 210 gms) complete all as specified and as directed. |
| 86 | M&L for 75 mm bore PVC (SWR) floor trap,plain with grating including jointing with solvent cement including disconnection of old existing trap, and connected with existing water pipe complete all as specified and as directed. |
| 87 | S&Ffor 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed. |
| 88 | S&Ffor 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 89 | S&F for110 mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 90 | S&F for110 mm bore PVC (SWR) bends with oval access door complete all as specified and as directed. |
| 91 | S&F for 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal withaccess door complete all as specified and as directed. |
| 92 | S&Ffor 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 93 | S&Ffor 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed. |
| 94 | S&F for75 mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 95 | Supply only integral water proofing compound complete all as specified and as directed. |
| 96 | M&L for water proofing treatment on RCC roof etc. comprising with the following operation & as specified herein below:- (a)Taking down existing old tarfelt, bituminous compoundincluding cleaning & removing debris to a distance exc 100 m n.exc.250m. (b) M&L 25 thick cement concrete type B0 1:2:4(12.5 mm graded aggregate) finished even and smooth. (c) M&L for 15 mm thick cement mortar in 1:4 finished even and smooth. (d) Preparing & cleaning of fully dried cement plastered surface. (e) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 litres per sqm conforming IS-3384. (f) A layer of APP based polymeric membrane3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric(weighing not less than 160 gms/sqm) shall be applied over bituminous primer as specified above.Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (g) One coat of aluminium paint over APP membrane @0.11Kg/Sqm. Note:-Prior to execution of the APP Membrane works, leak proof test shall be done by ponding water on roof slab to minimum depth of 25 mm. The entire roof slab shall be flooded with water for 48 hours. The necessary barrier shall be made to make feasible to stagnate water for 48 hours on roof slab. |
| 97 | M&L for concealed point wiring complete with 1.5 sqmm FRLSH, PVC insulated multi stranded copper conductor single core cable 1100 volts grade, drawn into non metallic PVC rigid conduit medium grade of 20mm dia and conduit accessories and fittings like bend, elbows, crosses wall crossing etc. including cutting, chasing and pinning fixed on wall, floor, roof and including provision of PVC insulated FRLS 1.5 sqmm copper conductor for earth continuity and connected to common earth dolly and modular metal flush boxes concealed in wall and modular cover plate with frame for housing the switches socket outlet, fan regulator etc, including testing on completion for one light/ fan point/ bell buzzer point controlled by one way 6 Amp modular switch complete all as specified and as directed. Note : Cost of PVC conduit,cover plate and box of suitable module, cutting chases of wall, making good disturbed wall surfaces including finishing with cement mortar (1:4), matching with existing colour/paint of surface are deemed to be included in the quoted rate. |
| 98 | M&L for concealed sub main wiring with two run of 4 Sqmm (nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC conduit of suitable size,fixed to wall/ceiling etc including one run of 4 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor(FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets. |
| 99 | All as per item No. 98 above but wiring with cables of size 2.5 sqmm & cables of size 2.5 sqmm as continuous earth wire for one 3 pin socket outlet, 5/15 Amps on Independent board. |
| 100 | S&F for switch piano, 5 Amp single pole, flush type one way 230 volts bearing ISI marked complete all as specified and as directed. |
| 101 | S&F for switch socket combination, 2 in 1, 5/16 Amps, 240 volts, bearing ISI marked flush type complete all as specified and as directed. |
| 102 | S&F for ceiling rose, 3 phase/PVC/polycarbonate, isolated body bearing ISI marked and including PVC box complete all as specified and as directed. |
| 103 | S&F for lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. |
| 104 | S&F for LED bulb of 9 Wattcomplete all as specified and as directed. Make : Havells /Philips/Bajaj. |
| 105 | S&F for stepped type(five steps) electronic fan regulator flush typecomplete all as specified and as directed. Make : Model No. 14502 of Anchor or equivalent. |
| 106 | S&F for new 20 Watt, surface and wall mounted LED Batten with polycarbonate housing and integrated complete all as specified and as directed. Make.Cat No LTTB4F20WLEDEW BATTENof C&S/Philips/ Bajaj/ Havells. |
| 107 | S&F for sheet metal enclosure for MCB DB double door, single pole & neutral, 8 way, 240 Volt with common bus bar at incoming end complete all as specified and as directed. |
| 108 | S&F for MCB,double pole, 240 Volts,6 to 32 Amps, "C" Series, 10KA capacity complete all as specified and as directed. |
| 109 | S&F for MCB, single pole, 6 to 32 Amps, 240 Volts, "C" Series, breaking capacity 10KA complete all as specified and as directed. |
| 110 | M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth complete all as specified and as directed. |
| 111 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to 4mm GI wire by means of bolts and nuts checknuts and washers protected by 20mm bore galvanised iron light grade pipe, funnel with 40mm bore GI medium grade pipe for watering, wire mesh including concrete pitPCC 1:3:6 type C1, precast RCC 1:2:4 type B1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT steel bars @ 150 mm centre to centre in both direction and 10mm dia MS handle of suitable size, charchole or coke and salt in alternative layers,including necessary excavation and earth work in any type of soil, all as specified and shown in electrical plate no 3 of SSR part-1 complete all as specified and directed and tested on completion. |
| 112 | M&L for earthing complete with GI earth plate electrode of size 600x600x6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI earth strip of size 32 x 6 mm earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel,protected by galvanized iron pipe 40mm bore (Medium grade) allas directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42x42x10cm thick, reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel,wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on completion all complete as specified and directed after taking down old earthing.( GI strip upto 7.5m including testing consider in this item). |
| 113 | S&F for 25 watt LED building security light new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07 complete all as specified and as directed. Make : Havells/Philips/Bajaj. |
| 114 | Supply, installing, testing and commissioning of light duty metal anti dust exhaust fan, suitable for Single Phase AC supply, earthing etc, power input 50 W, 220/240 V, 300 mm sweep size, fan speed 1350 RPM, 3 nos. blades, copper winding, Air delivery minimum 1160 CMM and including all fixing accessories complete all as specified and as directed. Make : Cropmpton/Bajaj/Khaitan/havells/Orient. |
| 115 | M&L for providing test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm, drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head screw including removing the existing old unserviceable complete all as specified and as directed. |
| 116 | Supply laying and testing cable XLPE insulated , screened, PVC bedded, galvanised steel strip or wirearmoured, electric power cables (heavy duty) 1100 volts grade with standard aluminium conductor of size 10 Sqmm 2 core and testing, including brass compression cable gland, terminal lug, etc. complete all as specified and as directed. |
| 117 | Supply laying and testing cable XLPE insulated , screened, PVC bedded, galvanised steel strip or wirearmoured, electric power cables (heavy duty) 1100 volts grade with standard aluminium conductor of size 95 Sqmm 3.5 core and testing, including brass compression cable gland, terminal lug, etc. complete all as specified and as directed. |
| 118 | M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the UG cable laid in trenches) of 23cm spread thick ness and consolidated (punned) upto 18cm thickness, complete all as specified and as directed. Note : For the purpose of payment, punned thick-ness of sand cushioning only shall be measured and paid for. |
| 119 | S&F for sub-class B brick, well burnt, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for UG Cable protection, complete all as specified and as directed. |
| 120 | Boring under road without disturbing the top surface of the road and taxiway for passing throught the cable, not exc. 10.00 metre in a single length complete all as specified and as directed. Note: Necessary infrastructure required for boring shall be arranged by the contractor at his own cost. |
| 121 | M&L for cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in pole coping including necessary form work for fair finish surfaces complete all as specified and as directed. |
| 122 | Supply and laying for 80 mm bore dia, steel tubes, galvanised, light grade with all fittings and fixed complete laid in trenches /wall for protection of cablecomplete all as specified and directed. |
| 123 | S&F for framed brackets of angles or tees with web and flange cut to shape, drilled and countershank for screw, including bending and welding angles as necessary, gusset plates, riveting, etc. n.exc 10 Kg each brackets conforming to Fe.290Gde-E-165 complete all as specified and directed |
| 124 | M&L for design, fabrication, installation, testing and commissioning of CPRI approved factory made Indoor LT main panel board both side openable, epoxy power coated with the following minimum specifications :- (a) LT Panel of size (0.6x0.4x0.70) m, panel made out of 2 mm thick CRCA sheet, detachable gland plate at top/bottom of 2mm thick CRCA sheet, IP-42 protection, with simens grey powder coating. Panel shall be fixed on (50X50X6)mm angle frame structure of height 700mm. (b) Panel shall be fabricated as per IP 65 grade protection. (c) Three phase + Neutral Aluminum bus bar – 200A ;All aluminum bus bar and other strips and shall be insulated with heat shrink sleeve of proper colour code. (d) All connection from bus bar to MCCB shall be made with aluminum strip or single core flexible copper wire. (e) Two no’s earthing connections to be connected to the panel board. The panel shall consist following also :- i) Incomer MCCB 160 Amps 4 pole 36 KA thermal magnetic based with over load and short circuit protection – 1 no. Make – L&T ii) LED Indicator lamps (RYB) - 01 Set. Make – L&T(ESBEE) iii) Digital panel meter for Amps, Volt, and other parameter flushing mounting of size 96x 96mm including indicating lamp (RYB) - 01 Set. Make – L&T v) Outgoing MCCB 100 Amps Four pole (TPN) 25 KAthermal magnetic based with over load and short circuit protection – 1 no. Make – L&T |
| 125 | S&F in repair off load change over switch 200 Amps with enclosure rated voltage 415 V-AC 50 Hz, type FP fixed on wall with nut & bolt complete all as specified and as directed. |
| 126 | S&F for water heater storage type, electric, steel body with copper inner tank and heating element upto 2KW, capacity 25 liters, BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. complete all as specified and as directed. Make : Crompton Greves/Bajaj/Havells. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
