Chandigarh Administration Engineering Department has published Running And Maintenance Of Public Health Service In Various Nrb Buildings Of Sector 54,55,56, Maloya, Village Dadumajra, Chandigarh . Submission Date for this Tender is 16-08-2022. Civil Work Tenders in chandigarh Chandigarh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
2 | 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
3 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
4 | Cold twisted bars |
5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
6 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
7 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
8 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
9 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
10 | 1:3 (1 cement: 3 fine sand) |
11 | Providing and fixing white vitreous china pedestal type water closet (European type ) with seat and lid. 10 ltr. low level white vitreous china flushing cistern & C.P. flush bend with fitting C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design, complete including painting of fittings and brackets, cutting and making good the wall & floor wherever required |
12 | W.C. pan with ISI marked white soild plastic seat and lid. |
13 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : |
14 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. |
15 | Providing and fixing white vitreous china water closet squatting pan |
16 | Orissa pattern W.C. pan of size 580x440 mm |
17 | Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 metre long withS.S. traingular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
18 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
19 | 10 litre capacity - White |
20 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. |
21 | 10 litre (full flush) capacity-white |
22 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete |
23 | White solid plastic seat with lid |
24 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
25 | Flexible pipe |
26 | 32 mm dia |
27 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60gms. |
28 | Providing and fixing PTMT urinal cock of approved quality and colour |
29 | 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms |
30 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work – Exposed on wall. |
31 | 15 mm dia. nominal bore |
32 | 20 mm dia. nominal bore |
33 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): |
34 | 20 mm nominal bore |
35 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
36 | 30 cm length |
37 | 15 mm nominal bore |
38 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
39 | 15 mm nominal bore |
40 | 20 mm nominal bore |
41 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
42 | Providing and of fixing C.P. brass bib cock of approved quality |
43 | 15 mm nominal bore. |
44 | Providing andfixing C.P. brass angle valve for basin mixer and geyser points of approved quality |
45 | 15mm nominal bore |
46 | Providing and fixing PTMT bib cock of approved quality and colour. |
47 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
48 | Providing and fixing PTMT pillar cock of approved quality and colour . |
49 | 15mm nominal bore, 107mm long. Weighing not less than 110 gms. |
50 | Providing and fixing PTMT, push cock of approved quality and colour. |
51 | 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. |
52 | Providing and fixing PTMT Ball cock of approved quality, colour and make completeas |
53 | 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. |
54 | 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. |
55 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
56 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality |
57 | H D - 20 |
58 | Circular shape 560 mm internal diameter |
59 | Prov. & fixing22"x16" (550x 400 mm) beveled edge of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
60 | Providing and fixing of S.S.1"-4" long 32mm bend |
61 | Providing and fixing of PVC cover for water storage tank cover duly ISI marked of approved make |
62 | i) 300 to 1000 ltr. Cap. |
63 | ii) 2000-5000 ltr Cap. |
64 | Providing and fixing in position C.P. brass towel rail 20x600mm fixed with CP brass screws etc. complete in all respect approved make. |
65 | Providing and fixing of C.P. brass soap dish with C.P screwcomplete at site approved make |
66 | Provding and fixing SFRC G.T.cover and frame size 375X375X25 mm thick made out of MS angle iron size 25X25X5 mm thick with fixing wire mesh of size 1"X1" of 10 gauge including cutting,, welding and fixing with cement concrete 1:1 1/2:3. |
67 | Providing and fixing of SFRC I.C cover& frame 600x 600mmx 35 mm |
68 | Providing and fixing C.P. brass long body bib cock 15 mm dia of approved make complete in all respect. |
69 | Providing and fixing white vitreous china flat back half stall urinal of size 420 x 395 x 635mm with fittings, standard size C.P. brass flush pipe, spreadersand clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: Make as approved by EIC. |
70 | Providing and fixing PVC fitting for low level cistern kit complete in all respect. |
71 | Providing, fixing and testing of C.P./HCI/Chinaware Urinal Partition for Public Health Works complete in all respect to satisfaction of EIC |
72 | Providing and fixing SS grating complete as per site requirement |
73 | P/f of Hi Flow water Filter-cum-purifier including installation charges 2-3 ltr/min as approved by EIC N.S. items. |
74 | HCI Scrap / GI Scrap@ Rs.30 per kg PVC Scrap @ Rs. 20 per kgOld wooden doors & chowkhats @ Rs 5/- kg Pig lead Scrap @ Rs. 120 per kgBrass Scrap @ Rs. 300 per kg Old Brick @ Rs.4/- each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail