Military Engineer Services-MES has published Provision Of 3 Overhead Water Tanks 2 No 2 Lakh Gallon And 1 No 40000 Gallons At Lalgarh Jattan Mil Stn. Submission Date for this Tender is 22-09-2022. Over Head Tank Tenders in Ganganagar Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 17-Aug-2022 | critical date | Date | 05-09-2022 |
| 2 | 25-Aug-2022 | Corrigendum03 | BOQ | 09-09-2022 |
| 3 | 25-Aug-2022 | Corrigendum 02 | Date | 09-09-2022 |
| 4 | 09-Sep-2022 | Corrigendum 05 | Date | 15-09-2022 |
| 5 | 09-Sep-2022 | Corrigendum 04 | Other | 15-09-2022 |
| 6 | 15-Sep-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-09-2022 |
| Sl. No. | Item Description |
| 1 | Lump sum price worked out by the tenderer for "Building / Structure Work" as listed in Schedule ‘A’ Section - I. |
| 2 | Lump sum price worked out by the tenderer for“ROAD, PATHAND CULVERT WORKS" as listed in Schedule ‘A’ Section - II |
| 3 | Lump sum price worked out by the tenderer for“SECURITY WALL, CHAIN LINK FENCING,AND STEEL GATE WORKS" as listed in Schedule ‘A’ Section - III |
| 4 | Sch "A" Sec - IV(EXTERNAL WATER SUPPLY WORKS) |
| 5 | Supply, Fixing, testing, and commissioning Digital water level indicator (digital size 100mm) with five stage Magnetic level sensing probe unit made of stainless steel (SS-304) of minimum 16 mm dia probe stem customized to depth of the tank and sensors epoxy sealed in the probe stem actuated by float that moves on the probe stem with the level of water in the tank and reading shown in LED digital panel including connection from probe unit to panel and panel to DB with copper conductor cable of suitable size as per manufacturer instructions drawn through & including 20 mm dia PVC rigid conduit (heavy duty, ISI marked) fixed along RCC pillar/wall surface including all fitting arrengement i.e. PVC clamp, rawl plug, screw terminal etc. Level indicator should be complete with alarm on low and high level (both visual and Audio) along with by pass facility for audio alarm complete all as specified and as directed. Make: Actice controls/ RAWACO/Century21st/Unison/Alphatech |
| 6 | Supply and fixing250mm dia sluice valve PN 1:6, ISI marked confirming to IS-14846, flanged and drilled, steel spindle and iron wheel, brass ringincluding jointing material such as nuts, bolts, washers and rubber sheet etc including dismantling of old sluice valve all directed by Engr-in-Charge |
| 7 | Supply and fixing250mm dia sluice valve PN 1:0, ISI marked confirming to IS-14846, flanged and drilled, steel spindle and iron wheel brass ring including jointing material such as nuts, bolts, washers and rubber sheet etc including dismantling of old sluice valve all directed by Engr-in-Charge |
| 8 | Supply and fixing200mm dia sluice valve PN 1:0, ISI marked confirming to IS-14846, flanged and drilled, steel spindle and iron wheel brass ring including jointing material such as nuts, bolts, washers and rubber sheet etc including dismantling of old sluice valve all directed by Engr-in-Charge |
| 9 | Supply and fixing150mm dia sluice valve PN 1:6, ISI marked confirming to IS-14846, flanged and drilled, steel spindle and iron wheel brass ring including jointing material such as nuts, bolts, washers and rubber sheet etc including dismantling of old sluice valve all directed by Engr-in-Charge |
| 10 | Supplying, laying, jointing and testing Ductileiron pipe class K-9 confirming to IS : 9329 of bore 250 mm (ISI marked), spigot & socketed ends centrifugally cast suitable for"Push on joints" suppiled with rubber tyton joints with cement mortar lining inside and mettalic zinc coating with finishing layer of bitumenous coating outside the pipe laid in trenches including taking down or up existing pipe and fittings as requried complete all as specified and as directed. Note : (a) Earth work and DI specials/ fittings shall be measured and paid separetly. (b) Cost of joints including jointing materials shall deemed included in unit rate quoted by contractor. |
| 11 | Supplying, laying, jointing and testing Ductileiron pipe class K-7 confirming to IS : 9329 of bore 250 mm (ISI marked), spigot & socketed ends centrifugally cast suitable for"Push on joints" suppiled with rubber tyton joints with cement mortar lining inside and mettalic zinc coating with finishing layer of bitumenous coating outside the pipe laid in trenches including taking down or up existing pipe and fittings as requriedcomplete all as specified and as directed. Note : (a) Earth work and DI specials/ fittings shall be measured and paid separetly. (b) Cost of joints including jointing materials shall deemed included in unit rate quoted by contractor. |
| 12 | Supplying, laying, jointing and testing Ductileiron pipe class K-7 confirming to IS : 9329 of bore 200 mm (ISI marked), spigot & socketed ends centrifugally cast suitable for"Push on joints" suppiled with rubber tyton joints with cement mortar lining inside and mettalic zinc coating with finishing layer of bitumenous coating outside the pipe laid in trenches including taking down or up existing pipe and fittings as requriedcomplete all as specified and as directed. Note : (a) Earth work and DI specials/ fittings shall be measured and paid separetly. (b) Cost of joints including jointing materials shall deemed included in unit rate quoted by contractor. |
| 13 | Supplying, laying, jointing and testing Ductileiron pipe class K-9 confirming to IS : 9329 of bore 150 mm (ISI marked), spigot & socketed ends centrifugally cast suitable for"Push on joints" suppiled with rubber tyton joints with cement mortar lining inside and mettalic zinc coating with finishing layer of bitumenous coating outside the pipe laid in trenches including taking down or up existing pipe and fittings as requriedcomplete all as specified and as directed. Note : (a) Earth work and DI specials/ fittings shall be measured and paid separetly. (b) Cost of joints including jointing materials shall deemed included in unit rate quoted by contractor. |
| 14 | Supply, fixing DI fitting of any size and any type ISI marked with IS 9523-2000 of Class K-9with cement mortar lining inside and mettalic zinc coating with finishing layer of bitumenous coating outside the pipe complete all as specified and directed by Engr-in-charge. Note : (a) Payment shall be made as per actual weight of DI fitting. (b) Make of DI fitting shall be same as of DI pipe or as recommended by manufacterur of pipe. |
| 15 | Material and labour for DI pipe cutting upto200mm dia for reducing to required length for insertion of new branches, tees, collar, tail pieces etc in position complete all as specified. Note :1. Excavation ,earth works and fittings required for jobare deemed to be included in the rate quoted by the Tenderer. 2 CI/DI fitting to be measured and paid seperatly |
| 16 | Supply and fixing Street light Nature Switch single phase for automatic switching of street lights/ Aviation light based on LUX level of natural light the sensor nature switch along with suitable power contractors and MCBs (Input-output should be enclosed in pole/wall mountable enclosure made of rust proof, electric shock proof, termite proof and FR grade SMC junction box (sintex or equivalent make) conforming to IP 54. the contactor MCBs and copper circuit wiring (min 4 sqmm) should enough to take single phase contactor rating 25 Amp including making all conections all as specified and directed by Engineer in Charge Model : Swadeep 02EC 3kW1P sinlge phase 25 Amp or Equivalent make as approved by GE. |
| 17 | Material and labour for Construction of brick masonary valve pit chamber size 105 X105 X105 cm (internal dimension) using sub class "B" bricks complete including excavation & earth work, returning fillig and disposal of surplus soil to distance not exceeding 50m and deposited where directed, PCC 1:5:10 type E-2 using 40 mm graded stone aggregate in foundation, coping on top in PCC 1:2:4 type B-2 using 20 mm graded stone aggregate, brick work in cement mortar (1:4), inner plaster 12 mm thick in cm (1:4) finished even and smooth and pionting flush externally as the work proceeds in the same mortar, MS sheet cover 3.15mm thick mounted on angle iron frame of size 50 x 50 x 6mm with handle and locking arrangement duly painted with two coats of synthetic enamel paint over a coat ofred oxide primer and embeded portion of MS work duly applying black bitumenous paint before embeded complete all as specified and as directed and shown on drawings. |
| 18 | Subtotal |
| 19 | Lump sum price worked out by the tenderer for“AREA DRAINAGE WORK" as listed in Schedule ‘A’ Section - V |
| 20 | Lump sum price worked out by the tenderer for“LIGHTENING PROTECTION AND AVIATION OBSTRUCTION LIGHTWORKS" as listed in Schedule ‘A’ Section - VI (Part-I) |
| 21 | Sch "A" Sec - VI (Part-II), (EXTERNAL ELECTRIFICATION,LIGHTENING PROTECTION AND AVIATION OBSTRUCTION LIGHT WORKS) |
| 22 | Supply and fixing Aviation obstruction light fitting, twin type, comprising of aluminium alloy housing with polycarbonate enclosure and accessories complete with LEDs to be fixed on the OHR with suitable fixing accessories as shown on drawing complete all as specified and as directed. Make :- Bajaj Cat part No BGAV302 LED or equivalent in Philips/Wipro/Crompton |
| 23 | Material and labour for Sub main wiring for connection to aviation light from DB to top of OHR /any other light fittings elsewhere with 2x 1.5 Sqmm+1x1.5sqmm earth wire single coreFRLSH grade PVC insulated unsheathed, 1100V grade multistranded copper conductor drawn through &including 20mm dia PVC rigid conduit (heavy duty, ISI marked) fixed along RCC pillar/wall surfaces including all fitting arrangementi.e. PVC clamp, rawl plug, screw, terminal etc., complete all as specified and as directed. Note :-Two runs of copper conductor and one run of PVC conduit including accessories shall be measured and paid as one unit. |
| 24 | Supply and fixing Factory made sheet metal enclosure SPN, 04 Way with 200 Amp rated bus bar230/240V complete all as specified and as directed. |
| 25 | Sand cushioning, with dry and clean local tibba sand (for under ground cable) 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cablecomplete all as specified and as directed. (Note:- (i) Punned thickness shall be considered for payment purpose (ii) Approved local Tibba dry sand free from vegetations, grass and other deleterious substances shall be used.) |
| 26 | Supply and laying Best quality, locally available, sub class ‘B’ bricks (Old Size) for cable protection cover, laid flat and dry in trenches over the cable , perpendicular to the direction of cable complete allas specified and as directed. |
| 27 | Material & Labour for Earthing to Transformer / GOD switch / equipments / panels etc with & including galvanised mild steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than2.25 m below normal ground level) with top edge of the earth plate at a depth not less than 1.5 m below ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides, connected to & including galvanized mild steel strip 32x6 mm as earth lead, including nuts, bolts, check nuts & washers of galvanized iron or steel and riveted/welded to earth plate at one end and other end of strip connected to transformer / GOD / Panel / equipment body / test point with two Nos nuts bolts or welding with steel structure, GI earth strip encased in and including 40mm bore GI light grade pipe with all fittings from upper edges of earth plate upto 7.5 metre above ground level fixed with and including 25x3mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from earth pit to top of electrode and including funnel, wire mesh, copper lugs etc complete with earth pit in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and 40mm thick RCC (1:2:4 type B1) cover complete all as specified and shown in electrical plate No 3 of SSR Part-I including necessary excavation and earthwork in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exc 50m complete all as specified and as directed. Note : PCC chamber shall be constructed at least 1.5 mtr away from the earth electrode and pipe for watering shall be provided in slanting manner. |
| 28 | Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metre depth below normal ground level) with top edge of plate at a depth not less than 1.5 mtr below ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides, connected to galvanized earth wire 04 mm dia with and including bolts, nuts, check nuts and washers of galvanised iron or steel and riveted to earth plate and one end and connecting to main switch board or metallic bodies of HT/LT equipments etc at the other end, GI wire encased in and including 15 mm bore GI light grade pipe with all fittings, from top of electrode to body of equipment fixed with and includingflatiron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI light grade and including funnel, wire mesh, copper lugs etc from bottom of earth pit to top of electrode complete with earth pit in PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate and CI cover complete all specified and shown in electrical plate No 03 of SSR Pt-I connecting earth electrode to test point with and including earthing lead including neessary excavation and earthwork in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50m, material and labour complete all as specified and as directed by Engineer-in-Charge.(Notes 1. The rate quoted shall be deemed to include for all the above provisions. 2. PCC chamber shall be constructed at least 1.5 m away from the earth electrode and pipe for watering shall be provided in slanting maner) . |
| 29 | Supply and fixing energy efficient LED street light fitting of 35W pressure die cast aluminium housing/body, heat resistant clear toughened glass,better optics for uniform distribution street/Roadway luminaire, with driver, including electric connection, complete fitting with all accessories and following specifications and all as directed:- (a) Lumen system efficacy of luminaire should be minimum 110 Lumen per watt. (b) Input Voltage range : 140 to 270 volts(c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95(e) THD : Max10%. (f) CRI: Morethan 70 and CCT : 5700 K. (g) IP rating : IP66.(h) IK rating:Minimum IK07 (j) Built in potted LED Driver of the make as of the luminaire.(k) LED driver should be complete with all protections vizopen/short circuit protection, over voltage protection, all as per standard design of manufacturer. (l) Surge protection 10 kV (inbuilt + extended)(m) Lens - High Efficiency wide angle lens.(n) BIS Approved fixtures and driver(o) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily) |
| 30 | Material and labour for Brackets made out of GI tubing light grade 40mm dia, 1.5 metre long bent to shape at 120 degree angle at half metre from bottom, including two Nos clamps made out of MS Flat iron size 50x3 mm for fixing of bracket on steel tubular/ PCC poles with suitable nuts and bolts including painting to MS clamp and nut bolts with two coats of aluminium paint over a coat of red oxide primer complete all as specified and as directed. |
| 31 | Supply & Fix MCB 9 KA ruputring capacity, confirming to IS-8828:1996, IEC -898: 1995 SP & N 10 Amp rating all as specified and directed by Engineer-in-Charge. |
| 32 | Supply & Fix MCB 9 KA ruputring capacity, confirming to IS-8828:1996, IEC -898: 1995 SP 6 Amp rating all as specified and directed by Engineer-in-Charge. |
| 33 | Subtotal |
| 34 | Lump sum price worked out by the tenderer for“Excavation and Earth work" as listed in Schedule ‘A’ Section - VII. |
| 35 | Lump sum price worked out by the tenderer for“DISMANTLING/DEMOLITION WORKS" as listed in SCHEDULE "A" SECTION -VIII (PART-I) |
| 36 | SCHEDULE "A" SECTION -VIII, (PART-II) (DISMANTLING/DEMOLITION WORKS) |
| 37 | Demolition of existing RCC OHR above and over ground level only of including all pipes and fittings any discription and in any position, (appx 2 lakh gallon capacity) carefully without blasting, including reinforcement cut as required to facilitate and including removing rubbish material (i.e concrete and all other unserviceable debries) from site and thrown in low lying area (as per direction of GE/AGE) at any distance upto 10 KM from the site complete all as directed. Note : All safety precaution shall be strictly followed by the contractor during demolition of tank.Any loss and damage to the nearby existing structure during the demolition of OHT shall be made good by the contractor at his own cost and site of work shall be left clean and tidy after demolition of OHT. |
| 38 | Demolition of existing RCC OHR above and over ground level only of including all pipes and fittings any discription and in any position, (appx 40000 gallon capacity) carefully without blasting, including reinforcement cut as required to facilitate and including removing rubbish material (i.e concrete and all other unserviceable debries) from site and thrown in low lying area (as per direction of GE/AGE) at any distance upto 10 KM from the site complete all as directed. Note : All safety precaution shall be strictly followed by the contractor during demolition of tank.Any loss and damage to the nearby existing structure during the demolition of OHT shall be made good by the contractor at his own cost and site of work shall be left clean and tidy after demolition of OHT. |
| 39 | Subtotal |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
