}

Provision Of Small Arms And Amuninition Store Near Bldg No.T-28, Provn Of Fol Store And Urinal Block Near T-32 At Tezu Mil Stn Under Ge Lekhapani, lekhapani-Assam

Military Engineer Services-MES has published Provision Of Small Arms And Amuninition Store Near Bldg No.T-28, Provn Of Fol Store And Urinal Block Near T-32 At Tezu Mil Stn Under Ge Lekhapani. Submission Date for this Tender is 07-09-2022. Construction Material Tenders in lekhapani Assam. Bidders can get complete Tender details and download the document.




Tender Notice

33469900
Corrigendum : Provision Of Small Arms And Amuninition Store Near Bldg No.T-28, Provn Of Fol Store And Urinal Block Near T-32 At Tezu Mil Stn Under Ge Lekhapani
Open Tender
Indian
Assam
lekhapani
07-09-2022

Tender Details

Provision Of Small Arms And Amuninition Store Near Bldg No.T-28, Provn Of Fol Store And Urinal Block Near T-32 At Tezu Mil Stn Under Ge Lekhapani

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 23-Aug-2022 AMENDMENT8683 BOQ 31-08-2022
2 31-Aug-2022 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 07-09-2022

Key Value

Document Fees
INR 500 /-
EMD
INR 34000.0 /-
Tender Value
INR 17 Lakhs /-

BOQ Items

Name of Work:PROVN OF SMALL ARMS AND AMUNINITION STORE NEAR BLDG NO.T-28,PROVN OF FOL STORE AND URINAL BLOCK NEAR T-32 AT TEZU MIL STN UNDER GE LEKHAPANI
Sl. No. Item Description
1Surface Excavation not exceeding 30cm deepand averaging 15cm deep and getting out in soft / loose soil for roads to required slope gradient, chamber etc complete all as directed
2Rolling and consolidating formation surfacesusing 8 to 10 tonnes power rollercomplete all as specified and directed
3Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation,laying cables,etc and getting out in soft/ loose soil complete all as specified and directed.
4Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm of soft loose soil.complete all as specified and directed.
5Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
6Excavation in post holes each n.exc 0.5cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc25cm complete all as specified and directed.
7M&L for loose filling with broken brick aggregates of gauge 80 to 150mm in soakage pit, soak well etccomplete all as specified and directed
8M&L PCC(1:3:6) type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete all as specified and directed
9M&L PCC (1:4:8), type D-2, (using 40mm graded stoneaggregates)in foundations, filling, mass concrete etccomplete all as specified and directed.
10M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.
11M&L Brickwork with subclass ‘B’ bricks, straight for curved on plan to any radius in half brick thick walls built in CM (1:4).complete all as specified and directed.
12M&L Providing RCC M-25 (Design Mix)( using 20mm nominal size graded crushed stone aggregate) as in foundations, including rafts,footings,foundation beams,plinth beams;bases for columns,etc;basement slabs,under-reamed piles and mass concrete comlpete all as specified and directed.
13All as per Item No.12 above,but as in slabs supported on walls, beams and columns in floors, roofs,landings, balconies, canopies, deck slabs and in shelves and the like comlpete all as specified and directed.
14All as per Item No.12 above,but as in beams, cantilevers, bressumers,lintels over 1.5m span etc.complete all as specified and directed.
15All as per Item No.12 above,but as in chajjas comlpete all as specified and directed.
16All as per Item No.12 above,but as incolumns, pillars, piers, posts and struts etc. complete all as specified and directed.
17M&L Providing RCC (1:1.5:3) type A-1,(using 20mm graded stone aggregate) as incover slab for manholes, septic tank, soak well etc set in cement mortar 1:4 with plain fair faces incl chamfered, weathering, throating etc incl necessary use & waste of form workcomplete all as specified and directed
18M&L Providing RCC (1:1.5:3) type A-1,(using 20mm graded stone aggregate) as in lintels etc, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets including necessary formwork,complete all as specified and as directed
19M&L Providing precast ce-ment concrete(1:2:4)type B1,(using 20 mm graded stone aggregate) set in cement mortar 1:4 in win- dow or door cills, lintels, bressumers, steps,quoin blocks (for use with masonry), string courses, copings. kneelers, apexstones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed.
20M&L Providing PCC(1:2:4)type B1,(using 20 mm graded stone aggregate)as in roof kerbs or mud stops, rounded or chamfered on edges and other similar bands including use of formwork complete all as specified and directed.
21Formwork to soffits of suspended slabs such as roof slabs, landings and similar work not exc 200mm thick (Horixontal or sloping) for rough finished flat surfaces of concrete complete all as specified and as directed.
22Formwork to sides of concrete foundation, footings, base of coloumns, raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.
23Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels. Cantilevers, shelves including supports, overhangs, etc also splays between floor and beam etc for rough finished flat surfaces of cocrete complete all as specified and as directed.
24Formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished flat surfaces of concrete complete all as specified and as directed.
25Formwork to sides of pillars, posts, struts, piers, coloumns and stanchions for rough finished flat surfaces of concrete complete all as specified and as directed.
26M&L Antitermite treatmanet treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface,complete all as specified and as directed
27M&L Antitermite treatmanet Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall,complete all as specified and as directed
28S&F Steel ventilatorsfixed type complete with glazing bars dovtailed or welded,etc complete all as specified and as directed.
29S&F4mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5sq. m in each panecomplete all as specified and as directed.
30S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibres(wood powder/rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100gms) having maximum density of 650 kg/Cum and screw withdrawal strength of 1800N (Face)& 900N (Edge), minimum compressive strength 50N/Sqmm, modulus of elasticity 800N/sqmm and resistance to spread of flame of class A categorywithproperty of being termite , norer proof and , water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star head counter sunk SS screws, all as per direction of Engineer-in-charge.
31S&F Factory made single extruded WPC (Wood Polymer Composite) solid door / windows / Ceosetory windows & other frames/Chowkat of size 50x100mm comprising of virgin PVC polymer of K valve 58-60 (Suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having mimimum frame density of 750kg/cum, screw withdrawal strength of 2200N (Face) & 1100 N (Edge), minimum compressive strength of 58N/Sq mm, modulus of elasticity 900 N/ Sq mm and reristance to spread of flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge.
32S&F 150 mm size, aluminium anodised , barrel tower bolts of extruded section and fixed completeall as specified and as directed.
33S&F 100mm stainless steel butt hinges, with necessary screws and fixed to PVC door complete all as specified and directed.
34S&F 150mm size aluminium handles, cast type, anodized and fixed complete all as specified and directed.
35M&L TMTbars 10mm dia and over, cut to length, bent to shaperequired, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia orsecuring with clips,complete all as specified and directed.
36All as per Item No.35 above, but 6 to 8mm dia,complete all as specified and directed.
37All as per Item No.35 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders,complete all as specified and directed.
38S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (Fe-410-W(Gde-E-250) quality- B complete all as specified and directed.
39S&F 1 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
40S&F 150 mm Cast iron or malleable cast iron handles, cast type, stove enamelled black complete all as specified and directed.
41M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165complete all as specified and directed.
42S&F Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240 complete all as specified and directed.
43S& F Mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 4923-1979 grade St- 310 complete all as specified and directed
44S&F Rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachmentconforming to Fe:410-W(Gde-E-250) quality-A complete all as specified and directed.
45Mild Mild steelscrew bolts (machine made) with hexagonal or square heads at one end and screwed the other, orscrewed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, longbut length of bolt exc 5cm but n exc 10cm long complete all as specified and directed.
46M&L for angle iron as in fencing post incl cutting tops to shape as directed, drilling holes, notching for wire etcflat iron fillets incl all necessary drilling, bolting or riveting etc complete all as specified and directed.
47M&L for flat iron as in ties, incl cutting tops to shape as directed, drilling holes, notching for wire etc complete all as specified and directed.
48M&LMild steel round bars 10mm dia and over cut to length bent to shape required and fixing as required in fencing complete all as specified and directed.
49Supply only chain link MS galvanised fencing complete all as specified and directed.
50Fixing only chain link fencing including line wires and mesh size type of stadrads bolts, etc size of mess 100x100mm 4mm dia wire complete all as specified and directed.
51S&F MS bolts machine made with hexagonal or square head one end and screwed the other or screwed both end n.exc 5cm long 12mm dia complete all as specified and directed.
52S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia bars at 75mm spacing’s and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. (each line wire to be measured)
53M&L Pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
54M&L Pre-painted hot dip aluminium-zinc alloy metallic coated plain steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
55M&L Water proofing treatment on floor/roof etc comrising with the following operation as specified herein below :- (a) M&L 15mm thick plastering in cement mortar 1:4 finished even and smooth.(b) Preparing & cleaning of fully dried cement concrete. (c) Applying one coat of cold bituminious primer to the plastered surfaces @ 0.25liters per sqm conforming to IS-3384-1986. (d)A layer of APP based polymeric membrane 3mm thick (minimum) weighing 3 kg per sqm reinforced with polyester non woven fabric (weighing not less than 150gms/sqm) shall be applied over bituminious primer as specified above.Application of polymeric membrane shall be by torch application.The over lap shall be minimum 100mm on transverse direction and 75mm in longitudinal direction.(e) One coat of aluminium paint over the APP based membrane @ 0.11 kg/sqm.Make : MOPLY-FP manufactured byM/s Texa India Ltd or IWL (HYPERPLAS POLYMER) manufactured by M/s IWL Ltd.
56M&L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, with and including watered and rolled/rammed to a true surfaceusing 8 to 10 tonnes power roller complete all as specified and directed.
57M&L for75mm thick PCC (1:2:4)type B-2, (using 40mm graded stone aggregate) all as in floors, finished even and smooth without using extra cement all asspecified and as directed.
58M&L for 50 mm thick Cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with hot bitumastic mix in proportion of bitumen and sand 1:2 complete as specified & directed.
59Material & Labour for 75mm thick PCC 1:4:8type D2 using 40mm graded aggregate as in sub base complete all as specified and as directed.
60M&L for rubberised Chequred cement concrete tiles of size 25cmx25cmx22 to 25mm thick, with grey cement and pigments, set, jointed and pointed in grey cementslurry and pigments in floors laid over and including 20mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed
61M&L Glazed coloured ceramic tiles of size 300x450x6 to 7mm thick as in vertical surfaces such as skirting,dado,etc , set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles laid over & including 10 mm thick rendering as in backing wall plaster in CM (1:4) complete all as specified and directed.
62M&L Coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and directed.
63M&L PCC ( 1:3:6 ), type D-2 (using 40 mm gradedstone aggregate), as insub base of floor complete all as specified and as directed.
64M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed..
65M&L Factory made chmfered edge cement concrete paver block with grey cement and no pigments any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade.manufactured with table vibratoy method using PU mould laid in required coloured and pattern laid over sand bed complete all as specified and directed by Eng-in-charge.Note:-Sand bed shall be measured and paid separately
66M&L Rendering 5mm thick in CM (1:3) on fair faces of concrete surface on ceiling finished even and smooth without using extra cement complete all as specified and as directed.
67M&L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfacesincluding finishingfair and evenall as specified and directed.
68Supply only integral water proofing compound of approval brand complete all as specified and directed.
69M&L Rendering 15mm thick in CM (1:6) on fair faces of brick / concrete surfaces Neeru finish to plastering as specified as in skirting to match the floor complete all as specified and directed.
70M&L Rendering 10.mm thick plaster in cm 1:6 on fair faces of brick work or concrete surfacesincluding finishing top even and smooth without using extra cement complete all as specified and directed.
71M&L for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified & directed.
72M&L Preparation of newly plastered surfaces on ceilings and applying three coats of white wash complete all as specified and as directed.
73M&L Prepration of newly plastered surface of walls and applying two coats of cement base paintover a coat of primer complete all as specified and as directed.
74M&L Preparation of newsteeland iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paintover a coat of red oxide primer complete all as specified and directed.
75S&F GI pipes 15mm dia bore of pipes, (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
76S&F GI pipe 20mm dia bore of pipes, (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
77S&F Fancy type15 mm dia swan neckpillar taps, cast copper alloy with capstan heads,chromium plated , screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks & fly nuts, screwed for ironpipe & fixed complete all as specified and directed.
78S&F, Wash basins white, vitreous China, flat back, size 580x450mm,excluding taps, waste, chain and plug and porcelain stopper but including bracketsfixed to wall complete all as specified & directed.
79S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) incl Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)
80S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified & directed.
81S&F 40 mm Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqm as in waste water pipes complete fixed in repair all as specified & directed.
82S&F in repairs 15mm bore dia stop valves / angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.
83S&F Rotational moulded polyethylene water storage tanks of 1000 ltr capacity,(cylindrical vertical with closed top) double layered hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed.
84S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe & fixed (Minimum weight 210 gms) complete all as specified and directed.
85M&L 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement in repair complete all as specified and directed.
86S&F in repair 32mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) fixedin repair complete all as specified and as directed.
87S&FMirror of selected quality glass, mounted on 4mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed complete all as specified and as directed.
88S&F PVC (SWR) pipes 110mm diasingle socketed, in any length with rubber ring joints, fixed to walls as in repair complete all as specified and as directed.
89S&F PVC (SWR) pipes 75mm diasingle socketed, in any length with rubber ring joints, fixed to walls as in repair complete all as specified and as directed.
90S&F PVC (SWR) bends 110mm dia any radius as in repair all as specified and directed.
91S&F PVC (SWR) bends 75mm dia any radius as in repair all as specified and directed.
92M & Lfor point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables of 2x1.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and including Instove enamelled steel conduitterminated in mild steel Metal sunken boxforswitches, sockets, fan regulators etc for one light point controled by one one way 5 Amp switch complete all as specified and directed by Eng-in-Charge.
93All as per item No 92 above,but one 15 Amps socket outlet but using 2.5 sq mm,copper conductor with 2.5 sq mm,PVC insulated single core cable for earth continuity conductorcomplete all as specified and directed by Eng-in-Charge.
94M & L for concealed point wiring complete with 1.5 sq mm FRLSH,PVC insulated multi standard copper conductor single core cable 1100 volts grade,drawn into and including non metalic PVC rigid conduit medium grade ofsize not less than 20mm bore and conduit accessories fixed on wall roof etc, and including provn of PVC insulated 1.5 sq mm copper conductor cable for earth continuity and connected to common earth dolly and pressed steel terminal boxes made out of 1.6 mm thick MS sheet concealed in wall and laminated sheet cover of 3 mm thick on top for housing the switches socket,outlet etc.,for one light point controled by one one way 5 Amp switch complete all as specified and directed by Engineer-in-Charge.Note caused of PVC conduit cutting chases of wall making good disturbed wall surfaces including finishing with cement mortor 1:4 matching with existing shade of the painted surface are deemed to be included in the quoted rate.
95All as per Item No.94 above,butOne Exhaust fan point controlled by one , one way 5 Amp switch complete all as specified and directed.
96S&F Switch piano flush button, single pole, one way 5 Amp complete all as specified and directed.
97S & F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.
98S&F Switch socket combination, 5 in 1, multipurpose 5/15 Amps flush type universal complete all as specified and directed.
99S&F Ceiling rose, 3 terminals, surface bakelite / PVC / Polycarbonate, isolated body to be fixed on wall/ceiling complete all as specified and directed.
100S&F LED light fitting 1x16Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protectionwith die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.complete all as specified and directed
101S&F Single pole and neutral DB wall mounting type,240 Volts,4Way with 200 Amps rated bus bar,double door suitable for fixing MCB"s including connecting etc and taking down U/S DB ,main switch all as specified and directed.
102S & F MCB SPN 6 Amps to 32 Amps 240 voltscomplete all as specified and directed
103S & F MCB SP 6to 32 Amps 240 voltscomplete all as specified and directed
104S & F LED building security light fitting 25W new generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP65 protection and impact resistance of IK07 complete all as specified and directed
105S&F Integrated LED tube light fitting complete set2 ft, 1 x 10 wattconnector block etc. complete withall accessories internally pre-wired andconnecting the same to ceiling rose with using copper conductor 23/0.0076flexible twisted twin core cable ,and fixing the light fitting to walls / roof complete all as specified and directed
106S & F Exhaust fan 300mm sweep , 1400 RPM,heavy duty metal body and connecting the same to ceiling rose with using copper conductor 23/0.0076flexible twisted twin core cable ,and fixing the light fitting to walls / roof complete all as specified and directed
107Supply,laying of sand for sand cushioning with a layer of sand 8cm thick before laying of cable and 15cm thick after laying of cable in trenches complete all as specified.
108M&L Brick protection using old size sub class ‘B’new bricks, laid flat dry but jointed, laid length wiseperpendicular to theaxis of cable all as specified and directed.
109Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core laying in trenches/walls complete all as specified and directed.
110S&F 40 mm bore GI tubing (light grade)with all fittings laying in trenches/wallfor cable protection,complete all as specified and directed.
111S&F 50 mm bore GI tubing (light grade)with all fittings laying in trenches/wallfor cable protection,complete all as specified and directed.
112M&L Cutting existing steel tubing for alteration or addition (each cut measured ) bore of pipe 40 mm / 50 mm /80mm complete all as specified and directed.
113M&L Screwing existing steel tubign for alterations or additions (or lengthening screw on pipe to form connector)complete all as specified and directed.
114S&F GI pipe steel water tubing galvanisedof size 25 mm bore (medium grade) with all fittings and accessories laying in trenches/ on wall/under road complete all as specified and directed.
115S&F GI pipe steel water tubing galvanisedof size 40mm bore(medium grade) with all fittings and accessories laying in trenches/ on wall/under road complete all as specified and directed.
116S&F Gate, globe valves of size 25 mm bore cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed.
117S&F Gate, globe valves of size 40 mmbore cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe and fixed bore complete all as specified and directed.
118M & L Brick valve chamber of internal size 90 cm x 90 cm x 90 cm by using brick masonry with with 23 cm thick wall in CM 1:6 including excavation, earth work in any strata & PCC 1:4:8 foundation type D-2, 75 mm thick including 20 mm thick PCC 1:2:4 type B1 in & plastering the internal surface with 10 mm thick cement mortar 1:4 providing 3.15 mm MS sheet chamber cover double opening arrangement center lock system with40x40x6mm angle iron frame duly painted with two coat of black bituminous paint over one coat of red oxide primer complete all as directed.
119S& F Air termination vertical type, single pointed made of 12mm dia 300mm long aluminium rod including necessary fixing arrangements with aluminium bolts, nuts, lead wasters etc., complete and including provision of GI tubing light grade 40mm dia, 300mm long with one end embedded in PCC block of size 300mm x 300mm x 300mm and other end fitted with air termination rod, complete all as specified and directed.
120S& F Test point terminal block made of gun metal orphosphorus bronze of size 75mm x 75mm x 25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hexagonal head screw for fixing the same on wall, complete all as specified and directed.
121S& F Horizontal anddown conductors, aluminium strip of size 25mm x 3 mm and includingepoxy insulator bus bar type 40mm thick at an interval of600mm apart for lightening protection on roof and for down conductors, including all fixing arrangement stand,aluminiun nut, bolt & washers, complete all as per IS-2309-1989 and testing, complete all as specified and directed. NOTE:- Aluminium strip shall be jointed with rivets (minimum 4 Nos) .
122S&F GI strip 25x4mm burried directly in ground upto 30 cm deep in earth pit or otherwise above ground level complete all as specified and directed.
123S& F Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than2.25 metres below normal ground level with top edge of the plate at a depth not less than 1.5 metres belownormalgroundlevel,connected with and including GI strip 25mm x 4mm in andincluding GI pipe 50mm bore medium grade as protection pipe (from top of earth plate up to the body of equipment) by means of GI bolts, nuts, check nuts and washers of GI and thimbles, earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick, all around includingtop and bottom and watering pipe 20mm bore of GI pipe light grade with funnel and wire mesh, PCC chamber of size 300 x 300 x 300 mm (top of chamber minimum 15 cm above the normal ground level (1:3:6) using 20mm graded stone aggregate and RCC cover (1:2:4) type B-I using 20mm graded crushed stone aggregate and angle iron frame including necessary excavation/ earth work in any type of soil/rock and as shown in Electrical plate No. 5 of SSR Part-I (2009) testing on completion complete all as specified
124Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire meshincluding necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways completeall as specified & directed by Engineer-in-Charge.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail