Rural Engineering Department has published Under District Lucknow, Construction Work Of Hall On Ground Floor And First Floor In Registration Office, Kaiserbagh Lucknow Lot No 2. Submission Date for this Tender is 17-09-2022. Building Work Tenders in lucknow Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Work |
2 | Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the E/I within a distance of 60 metres (200ft) As per PWD SOR 07-07-2020 Page No-08 SI No-02 (692) |
3 | Dismantling reinforced cement concrete or reinforced brick work including stacking of dismantled materials as directed by the Engineer-in-charge with in a distance of 60 metres (200ft) As per PWD SOR 07-07-2020 Page No-08 SI No-04 (694) |
4 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-harge. All kinds of soil (2.8.1) |
5 | Construction of embankment with approved material obtained from viable lend as permitted approved by Engineer-in-charge and as per Technical Speciation Clause 301. 3.4.1 with all lifts and leads, spreading grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 as per Technical Specification Clause 301.5 MORD 301.5 (3.4) Cartage from 8 km |
6 | Supply and filling in plinth with sand under floors including watering ramming consolidialing and dressing complete . AS Per PWD SOR 14-08-2020 Page No. 11 S.No. 07 (2.27) |
7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone-III): 8 graded stone aggregate 40 mm nominal size) (4.1.8) |
8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) (6.1.1) |
9 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns (5.9.1) |
10 | Centering and shuttering including strutting, propping etc. and removal of form work for : Columns, piers, abutments, pillars, posts and struts (5.9.5) |
11 | Centering and shuttering including struting, propping etc. and removal of form work for: Slab, chajja etc.Rate As per PWD SOR(5.9.3) |
12 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) AS Per PWD SOR 2020-21 (5.1.2) |
13 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) As per PWD SOR(5.2.2) |
14 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). As per PWD SOR 18-09-2020 Page No-13 SI No-18 (5.3) |
15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) As per PWD SOR 18-09-2020 Page No-16 SI No-02 (6.4.2) |
16 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 3 coarse sand) As per SOR (6.13.1) |
17 | Mild steel or iron in plain work such as reinforcement concrete or brick work (when not wrought to including bending for proper completion of work an includingsupply of steel i.e. wastage bend hooks and authorized overlapping shall be measured up to floor two level. |
18 | 12 mm cement plaster of mix : 1:4 1 cement: 4 coarse sand) (13.4.1) |
19 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm As per SOR (11.46.2) |
20 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm As per SOR (11.41.2) |
21 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick As per SOR 18-09-2020 Page No-26 SI No. 07 (11.26.1) |
22 | Supply and fixing of 110 mm dia PVC pipe complete with rose heads bends PVC Clamps 2.5cm x 3 mm fixedto wall by 15 cm long 6 mm dia nail and including per pair of plaster etc as per SOr 2020 (Maiterl Page No-04) (31) |
23 | Finishing wall with water proof cement paint of approved make and quality on new work with three coats of give an even shade including supply of all material labour and T&P etc required for proper completion of the work as per SI No. (660+661) |
24 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. As per PWD SOR 07-07-2020 Page No-06 SI No. 30 (13.80) |
25 | One priming coat & two coat oil distemper on new work including supply of all materials labour and T&P etc. required for proper completion of the work. As per S.I No . (649+650) |
26 | Providing and laying integral cement based water proofing treatment including prepration of surface as required for treatement of roofs, balconies, terraces etc consisting of following operation: (a) Applying a sulrry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by EIC over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatement. (B) Laying brick bats with mortar using broken bricks / brick bats 250mm to 115 mm size with 50% of cement mortar 1 :5 (1 cement:5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by EIC over 20 mm thick layer of cement mortar 1 :5 (1 cement:5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by EIC to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs (c) after two days of proper curing applying a second coat of cement slurry using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by EIC. (d) Finishing the surface with 20 mm thick jointless cement mortar of1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by EIC incluing laying glass fibre cloth with average tickness of 120 mm and minimum thickness at khurra as 65 mm as SI No. 22.7.1 |
27 | Cement concrete flooring 1:2:4 (1 Cement : 2coarse Sand : 4 graded stone aggregate) finished with floating coat of neat cement. Including cement slurry; 40 mm thick with 20 mm nominal size stone aggregate as SI No. 11.3.1 |
28 | Wiring points for light with 1 sqmm.FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement , complete with 1.5 sqmm FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. 138(C) |
29 | Same as item No.(1) but for fan and light duty exhaust fan. 140© |
30 | Same as item No.(1) but for 5 amp plug point with piano type switch and socket etc. 141© |
31 | Same as item No.(1) but for call bell point. 142© |
32 | s/f of electronic fan dimmer 300/400 W on existing switch board including making connection, material, labour & T/P 1203(b) |
33 | S/F of hexagonal fanbox of each side of 80mm and fabricated from 16SWG MS sheet incorporating 10mm dia MS rod duly bent for supporting fan hanger and screwing arrangement with wiring conduit. 1149 |
34 | Supply & wiring of submains with 2 nos. 2.5 sq.mm & with 1 no. earth wire of 1.5 sqmm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab.1307(C) |
35 | Supply and wiring of submain 2 number 4 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5sqmm PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 221(B) |
36 | Supply and wiring of submain 4 number 6 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 25mm dia PVCconduitconcealed in wall, along with two number 4 Sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 272(C) |
37 | Supply and wiring of submain 4 number 10 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 32mm dia PVCconduitconcealed in wall, along with two number 6 Sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 273(C) |
38 | Construction of recess distribution board of sizes 600X480X200mm including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work. 1141(B) |
39 | Supply and fixing of factory fabricated M.S. box of sizes 600X480X200mm in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work. 1147 |
40 | Supply and fixing of flush/surface mounting distribution boards without MCBs, complete in all respects. |
41 | 4 Way TPN CAT (B) 1026(B) |
42 | Supply and fixing of 240 voltsminiature circuit breaker of rating 06 - 32 A and10 kA breaking capacity and CAT-A ,in existing MCB, DB complete with connections as required. 1002 |
43 | Supply fixing and making connection of following MCBS complete in all respects as per direction and satisfaction of engineer-in-charge. |
44 | 6 to 32A 4 Pole MCB (10 KA) CAT-B 1019 |
45 | 6 to 32A triple Pole MCB (10 KA) CAT-B 1013 |
46 | S/F and making connection of 25A four pole 30 mA RCCB of DIN rail mounting.complete in all respect. 396 |
47 | S/F of 63A, 415V TPN Rewirable type Heavy duty switch fuse unit OF CAT-B. On angle iron barcket, with 50A fuse element 316 |
48 | Supply and fixing of power plug with 15A/250 V flush typeswitch and 5 Pin 20 A/250V flush typesocket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work. 1139 |
49 | Supply and fixing of power plug with 20A/250 V flush typeswitch and 5 Pin 20 A/250V flush typesocket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work. 1139(a) |
50 | Supply and fixing Single Pole MCB Blanking Plate complete in all respects. 1034(b) |
51 | Supply and burrying of 600 mm x600mmx6mm GI plate vertically for earthing with its top atleast 3m below ground level complete with GI pipe and funnel for watering and two earthing leads of No 8 to 10 SWG GI wire in 15 mm dia GI Pipe up to switch board. 30cm square C.I frame with hinged cover, masonry housing, alternate layers of charcoal/coke and salt at least 15mmm thick around. Complete in all respect. 703 |
52 | Supply and laying of 25mmx3mm G.I strip for earthing purpose , complete in all respect. 716 |
53 | Supply and fixing of 01 No 8 SWG G.I wire in 15mm dia G.I pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P and other material required for proper completion of work 721 |
54 | Supply and laying of 35sqmm 3 1/2core aluminium conductor, PVC insulatedarmoured/sheathed cable of 1000V grade at depth of 75cm below ground level and protected with burnt bricks . 501 (k) |
55 | Supply andlaying of 35 sqmm 3 ½ core PVC insulated, armoured Aluminium conductor cable along wall. 501(k) - 507} |
56 | Supply and fixing of 32 mm diameter, 16 SWG thick rigid steel conduit concealed in wall. 150 |
57 | Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of engineer incharge 503j |
58 | 25sqmm 3 1/2 core 503 (j) |
59 | Supply and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge. |
60 | 25 Sq. mm As per SI No. 504 (e) |
61 | 6 Sq. mm As per SI No.504(b) |
62 | 4 Sq. mm As per SI No.504(a) |
63 | S/F of crimpingless copper tin plated cable lugs of 1.5 mm2 to 6 Sq. mm1129 |
64 | supply and fixing of LED type tube light fitting suitable for 1x36W T/L complete including tube light(CATT-AA) 1413 |
65 | supply and fixing of batten/angle holder complete in all respect 405 |
66 | Exhaust Fan Point144c |
67 | Supply and fixing of fire extinguisher A,B,C, type of 04 kg capacity, complete with initial charge and wall bracket along with supply of all labour T&P 1131(A) |
68 | Supply and fixing of fire bucket round bottom made of GI sheet 9-11 Ltr capacity. supported or longing bracket unaired and locked. 1133 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail