Military Engineer Services-MES has published Special Repair For Conversion Of Ci Pipe Line Into Di Pipe Line From Filteration Plant To Mrs Over Head Tank And Other Sanctioned Works At Fazilka Mil Stn. Submission Date for this Tender is 09-09-2022. Pipe Laying Tenders in abohar Punjab. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 02-Sep-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-09-2022 |
Sl. No. | Item Description |
1 | SCHEDULE "A" SECTION I (B&R Portion) |
2 | Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth; or n exc 10 Sqm on plan and n exc 1.5 m in depth forpipe linein soft/loose soil,& getting out complete all as specified and directed by Engin-in-Charge. |
3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engineer-in-Charge |
4 | Dismantling\Taking up cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead. Including disconnecting pipe and fitting for 250 mm dia bore complete all as specified and directed by Engineer in charge. |
5 | Dismantling\Taking up cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead. Including disconnecting pipe and fitting for 150 mm dia bore complete all as specified and directed by Engineer in charge. |
6 | Supply and laying jointing commissioning and testing pipe ductile Iron , S/S including specials, Class “K-9” ,250 mm dia. Laid in trenches suitable for rubber push or tighten joint. complete all as specified and directed by Engineer in charge. |
7 | Supply and laying jointing commissioning and testing pipe ductile Iron , S/S including specials, Class “K-9” ,150 mm dia. Laid in trenches suitable for rubber push or tighten joint. complete all as specified and directed by Engineer in charge. |
8 | M&L For CI fitting for spigot and socketed pipes(any type, radius and angle) tapers any type,(straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs. up to 150 mm bore. complete all as specified and directed by Engineer in charge. |
9 | M&L For CI fitting forspigot and socketed pipes(any type, radius and angle) tapers any type,(straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs. up to 200 to 300 mm bore. complete all as specified and directed by Engineer in charge. |
10 | M&L For DI fitting for DI spigot and socketed pipes(any type, radius and angle) tapers any type,(straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs. up to 200 to 300 mm bore. complete all as specified and directed by Engineer in charge. |
11 | Supply and fix Cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 80 mm dia bore and fixing up in Ductile Iron Water supply mains of size 250 mm dia. |
12 | Supply and fix Valves, reflux (non return) valve, flanged of class 1.6 PN, 250 mm diaI SI Marked complete with necessary gaskit nut bolt and washer etc. and joining including testing for leakage complete all as specified and directed by Engr - in -Charge |
13 | Supply and fix Valves, Sluice, flanged of class 1.6 PN, 250 mm diaI SI Marked complete with stainless steel spindle flanged both ends drilled CI gate with brass ring and iron wheel handle suitable for DI Pipe line.complete all as specified and directed by Engr - in -Charge |
14 | Supply and fix Valves, Sluice, flanged of class 1.6 PN, 150 mm diaI SI Marked complete with stainless steel spindle flanged both ends drilled CI gate with brass ring and iron wheel handle suitable for DI Pipe line.complete all as specified and directed by Engr - in -Charge |
15 | Trial bore of 200 mm dia upto 200meter depth below ground level in any kind of soil strata including hard stone/boulder including electric logging, MS cap, MS flat iron clamps, reducing socket etc. |
16 | Development of tube well with compressed air and after with 25% extra capacity pump by pumping muddy water. |
17 | Yield test for the bore well by continuously pumping for 16 hours to determine safe pumping yield |
18 | Supply jointing and lowering PVC slotted 150mm dia heavy duty including providing suitable jail on the slotted pipe. |
19 | Supply jointing and lowering PVC 150mm dia heavy duty pipeincluding joints- |
20 | Supply and fixing GI pipe galvanised " Medium class " with all fitting laid in trenches of size 50 mm dia bore. |
21 | Supply and fixing GI pipe galvanised " Medium class " with all fitting laid in trenches of size 25 mm dia bore. |
22 | S & F stop valve size 25 mmcast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed. |
23 | S & F stop valve size 50 mmcast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed. |
24 | Removal of excavated surplus soil to a distance n.exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge . |
25 | Supply installing lowering and connecting up commissioning and Testing submersible solar pump of discharge 272 LPM at 30 Mtr head coupled with 3 phase AC motor of capacity 3 HP including 2 inch DPE delivery pipe with clamp, rope, 3 core SB wire of size 2.5 sqmm from starter to submersible pump complete with 3 KW solar panel with GI structure, solar controller, modules, lightening arrester, feeder pillar box with starter and 2 Nos GI chemical earthing for GI structure and lightening arrester and necessary civil works complete all as specified and directed. |
26 | Cutting existing Steel tubing laid in trenches of any size for addition and alternation |
27 | Construction of valve pit chamber of bricks machinery from the top of surface including MS sheet Cover of size 3.15 mm thick and angle iron 40X40X6 mm with hing and locking arrangement complete all as spd and dir. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail