Inland Waterways Authority Of India-IWAI has published Dry Dock Repair Of Sl Meghna For The Year 2022-23. Submission Date for this Tender is 19-08-2022. Marine Work Tenders in howrah West Bengal. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Beaching,blocking,unblocking including dock hire/mooring charges as required to be done for repair of vessel as per direction of EIC/ IWT Surveyor. |
2 | Ultrasonic testing to be made hull , deck plate and hull to LWL Ship side Port & Stbd for thickness as per direction of EIC/ IWT Surveyor. |
3 | Cropping & renewal of under water plate,deck plate, Ship side plate & other inside/outside fitments after Ultrasonic testing & Inspection of IWT Surveyor to be recomanded to renewed the plate, as per report of Ultrasonic test asdirected by EIC/IWT Surveyor. |
4 | During the execution of work under Serial No # 3 mentioned above - the renewal of bottom plates at engine room, crew cabin, rudder compartment, ship side plate is necessary and further labour charges for both main engine dismounting, generator set engine dismounting, removal of pipelines and re-mounting of all items viz, wall panel, electrical lines and other fitments inside and outside, same as metioned (at the time of removal of pipelines, panels and other fittings may get damaged and hence the same needs to be replaced for OE position, as per direction of EIC / IWT Surveyor. |
5 | Painting of under water hull plate & side plate to be done by 3- coats as per painting scheme from keel to water level after proper chipping, wire brushing and cleaning as required as per direction of EIC/IWT Surveyor.( 22.5 x 5.5 x 3 3=371 SQM) |
6 | Ship side LWL to main deck, Main Deck, super structure, railing, bathroom and other fitting painted by one coat of yellow zinc chromate anticrossive primer followed by two coats of Marine quality existing colour paintsincluding rudder,chain compartment & FWD hold as required as per direction of EIC |
7 | Supply and fitting of self sacrificing Zinc (99%) anode at hull (Appx. Size-20cm x 9 cm x 5 cm) as per dirction of IWT Surveyor/ EIC. |
8 | A.C of capacity 1.5 ton make panasonicin wheel house is not working properly.Same to be checked and repair with renewal of spare parts as required alongwith filling of gas for proper operation/performance. |
9 | Labour charge |
10 | Cost of spare-parts on actual plus 10% basis. |
11 | A.C of capacity 1 ton make voltasin officer cabin is not working properly.Same to be checked and repair with renewal of spare parts as required alongwith filling of gas for proper operation/performance. |
12 | Labour charge |
13 | Cost of spare-parts on actual plus 10% basis. |
14 | Supplying of new Life Buoy of reputed make with ISI mark with vessel name to be painted on the buoyaas required as per direction of EIC. |
15 | Officer/crew cabin comod/systern/tap/showeretcwas reported defunct same to be renewed/repaired as required as per direction of EIC. |
16 | Labour charge |
17 | Cost of material on actual plus 10% basis. |
18 | Wheel house and officer cabin vinyl sheet has reported damaged.Same to be renewed with good quality of vinyl sheet and its adhesive. ( 11 feet x 10 feet,officer cabin(8 feet x 7 feet),dinning room(10 feet x 7 feet)as required as per direction of E.I.C |
19 | Labour charge |
20 | Cost of material on actual plus 10% basis. |
21 | The vitrified tiles in officer cabins toilet,crew cabin toilet are reported broken .Same to be renewed and fitted as required as per direction of EIC. |
22 | Labour charge |
23 | Cost of material on actual plus 10% basis. |
24 | Entire Manhole covers & hatchs damaged rubber, studes, nuts & bolts and same to be checked, repaired/ renewed by good quality of rubber & SS fittngs including labour and materials as per direction of EIC / IWT Surveyor. |
25 | Anchor windlash alongwithmotor , gear, brake shoe, anchor chains, itsall accessoriesto be inspected and repaired/servicedwith renewal of spare-parts as required as per direction of EIC / IWT Surveyor. |
26 | Labour charges |
27 | Cost of spare-parts / materials and machining charges on actual plus 10% basis. |
28 | All Main sea suction valve and sea line valves along with its entire pipe lines to be checked, tested and serviced , repaired/ renewed including other fitment valve in entire ship as per direction of EIC / IWT Surveyor. |
29 | Labour charge |
30 | Cost of spare-parts / materials and machining charges on actual plus 10% basis. |
31 | Sea chest, Mud Box, Stainer to be checked, repaired, cleaned and painted as per direction of EIC / IWT Surveyor. |
32 | Labour charge |
33 | Cost of spare-parts / materials and machining charges on actual plus 10% basis. |
34 | Both side propeller,propeller shaft and it bushes is to be opened for finding out the clearness & checking of turness, buildup of bushes, etc and rectified in OE position as per drawing after fairing with same composition of Material / renewed the bushes if required and same to be fittedas per direction of EIC / IWT Surveyor. |
35 | Labour charge |
36 | Cost of spare-parts / materials and machining charges on actual plus 10% basis. |
37 | Build up of propeller blade if required, dressing to profile, bedding balancing of propeller, key to be bedded as required as per direction of EIC/IWT Surveyor. |
38 | Labour charge |
39 | Cost of spare-parts / materials and machining charges on actual plus 10% basis. |
40 | Both rudder assembly to be dismantalled, rudder stock, shaft, bushes etc to be checked and if required same to be build up as per OE size (as per drawing) and fitted back in position as per direction of EIC/IWT Surveyor. |
41 | Labour charge |
42 | Cost of spare-parts / materials and machining charges on actual plus 10% basis. |
43 | Fire hydrant valve to be serviced as per direction of EIC/IWT Surveyor. |
44 | Labour charge |
45 | Cost of spare-parts / materials and machining charges on actual plus 10% basis. |
46 | All blige to be cleaned as per direction of EIC/IWT Surveyor. |
47 | Seawage motor and pump is to be serviced as per direction of EIC/IWT Surveyor. |
48 | Labour charge |
49 | Cost of spare-parts / materials and machining charges on actual plus 10% basis. |
50 | Port side Main Engine Gear Oil Pressure meter to be checked, repaired/ renewed including labour and materials as per direction of EIC/IWT Surveyor. |
51 | Main engine sea water/FreshWater pump to be seviced as per direction of EIC/IWT Surveyor. |
52 | Labour charge |
53 | Cost of spare-parts / materials and machining charges on actual plus 10% basis. |
54 | G.S. & Emergency pump to be seviced as per direction of EIC/IWT Surveyor. |
55 | Labour charge |
56 | Cost of spare & machining (actual + 10%) |
57 | All Electrical / Electronic line & AC/DC fan navigation light , other fitment including engine related to be checked line, pannel board, sensor,battery charger,pannel board, and rectified the defects including DC light connection to be provided in kitchen & officer cabine toilet as per direction of EIC/IWT Surveyor. |
58 | Labour charge |
59 | Cost of spare (Actual + 10 %) |
60 | Top overhouling of both Generator engine make Kirlosker, Model -3R1040,HP-43(RUNNING 4400HRS).& Model -TV-2 ,HP-14,(RUNNING 4400HRS) as per direction of EIC/IWT Surveyor. |
61 | Labour charge |
62 | Cost of spare actual + 10% |
63 | HSD tank(Reserve & Service) ,seawage tank to be cleaned as per direction of EIC/IWT Surveyor. |
64 | Fuel transferpump to be be seviced as per direction of EIC/IWT Surveyor. |
65 | Labour charge |
66 | Cost of spare & machining (actual + 10%) |
67 | Blower to be seviced as per direction of EIC/IWT Surveyor. |
68 | Labour charge |
69 | Cost of spare(actual + 10%) |
70 | Water Purifier of capacity 10-Litre Green RO SeriesSupplied and installed as required as per direction of EIC. |
71 | Labour charge |
72 | Cost ofmaterial on actual + 10% |
73 | FRP boatto be repaired/fibre pestedat damagedportion withexisting thickness of FRP as required and after repair entireFRP Boat to be cleaned and painted with 2 coats of white paints as required and IWAI logo to be stencilled on both sides as per direction of EIC. |
74 | Labour charge |
75 | Cost of material on actual plus 10% basis. |
76 | Life Boat yamaha 25 HP Engin to be be serviced as per direction of EIC/IWT Surveyor. |
77 | Labour charge |
78 | Cost of spare & machining (actual + 10%) |
79 | Provision for supply of salwood ladder (15" x 1" x 2") as per direction of EIC/IWT Surveyor. |
80 | Wheel house false ceiling size- 8" x 4 " foot- ,officer cabin - 8" x 4 ",crew cabin-8" x 4 " foot has reported damaged.Samesupplied and fitted as required as per direction of EIC. |
81 | Labour charge |
82 | Cost of material on actual plus 10% basis. |
83 | Super structure (FRP) has reported leakage at its base line and water is entering officer cabin, toilet side and front side etc. Same to be checked and repaired as required as per direction of EIC/IWT Surveyor. |
84 | Hinge of wooden almirah(Crew cabin) has reported damaged. Same to be renewed as reqd. as per direction of EIC/IWT Surveyor. |
85 | Door lock of officer cabin to be renewed with existing one as per direction of EIC/IWT Surveyor. |
86 | Labour charge |
87 | Cost of spare & machining (actual + 10%) |
88 | Rubber gasket of all hatch cover to be provided with existing dia. And good quality as reqd. as per direction of EIC/IWT Surveyor. |
89 | Tyre fender alogwith its chains of appropriate length & dia. ,buldog clamp to be supplied as per direction of EIC. |
90 | Sun shed in the front side of wheel house of size : 5" x 10 " x 4 no. to be supplied and fitted with adequate size of clamp as required as per direction of EIC. |
91 | Main Generator alternator make Cropmpton Greaves Ltd.,Frame: GIR-160 MA, Power 25 KVA, 415 V,Class - H., 12 V. Ele. Start, Sl. No. GDAG 8070 heat warnish,bearingchecked as required for proper working as required as per direction of EIC. |
92 | Labour charge |
93 | Cost of spare & machining (actual + 10%) |
94 | Harbour Generator alternator makeCrompton Greaves Ltd., Frame GIR 60, Power 10 KVA, 415 V, Class-H, 12 Elec. Start, Sl. No. / Flag 7818GCAG7877 to be heat warnish,bearing to be checkedfor proper working as required as per direction of EIC. |
95 | Labour charge |
96 | Cost of spare actual + 10% |
97 | Fire extinguisher to be serviced refilled and tested as per direction of EIC/IWT Surveyor. |
98 | Mech.Foam type - 9 Ltrs |
99 | Water CO2 - 9/45 Ltrs |
100 | D.C.P.T. type - 5 Kg |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail