}

Under Jal Jeevan Mission Water Supply Scheme Ashta Tq. Bhoom, ashta-Maharashtra

Rural Development Department has published Under Jal Jeevan Mission Water Supply Scheme Ashta Tq. Bhoom. Submission Date for this Tender is 16-08-2022. Water Supply Project Tenders in ashta Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

33436673
Under Jal Jeevan Mission Water Supply Scheme Ashta Tq. Bhoom
Open Tender
Indian
Maharashtra
ashta
16-08-2022

Tender Details

Under Jal Jeevan Mission Water Supply Scheme Ashta Tq. Bhoom

Key Value

Document Fees
INR 5000 /-
EMD
INR 82433.0 /-
Tender Value
INR 82.43 Lakhs /-

BOQ Items

Name of Work: RETROFITTING TO ASHTA WATERSUPPLY SCHEMETQ. BHUM DIST.OSMANABAD UNDER JAL JEEVAN MISSION
Sl. No. Item Description
1SUWORK NO. 1 :- PERCOLATION WELL Item No. 1 :- Taking trial bore (core bore sampling )by callyx machine with TCT / NX bites together un disturbed strata samples for investigation in all types of stata, soft soil,murum,hard murum with boulders ,soft rock,hard rock,and quartzite etc.The item includes all hire and running cost of callyx machine,conveying all materials to site work excluding conveyance of callyx machine and back sampling all over burden strata in glass jar and core samples serially numbered at site in a wooden core box, samples to be taken at one meter interval and conveying to the place of as directed by engineer incharge. The dia. of bore in overburden shall be 100 mm and of NX size (50 mm ) in other strata.The item shall also include M.S. casing pipe of 2.5 mm thick plate in over burden only and shall be one meter above G.L. with cap over it.
2In weathered rock with boulder
3In weathered rock / soft rock
4In hard rock other than quartzite
5Item No.2:- Excavation in gencral in soft material sand hard murum with boulders in wet or dry cond-ition for headworks i.e. intake well. connecting pipe jack well pumps House. Supply well etc. for lfit 0 to 1.5 M and lead of 150 M including barriecading, guarding. disposing off surplus excavated stuff within a radius of 0.5 Km. As directed by Engineer in charge etc. complete. Lift 0.00 to 1.50 M
6Lift 1.50 to 3.00 M
7Lift 3.00 to 4.50 M
8Lift 4.50 to 6.00 M
9Lift 6.00 to 7.50 M
10Item No.3:- Excavation in general in hard material comp-rising of soft rock,hard roack, Manjara rock, etc. by blasting / controlled blasting, chiseling as required in wet or dry condition for head works i.e intake well. Connecting pipe . Jack well pump house supply well for lift 0.00 to 1.50 m & lead of 150m etc complete. Lift 7.50 to 9.00 M
11Lift 9.00 to 10.50 M
12Lift 10.50 to 12.00 M
13Lift 12.00 to 13.50 M
14Lift 13.50 to 15.00 M
15Lift 15.00 to 16.50 M
16Lift 16.50 to 18.00 M
17Lift 18.00 to 19.50 M
18Lift 19.50 to 20.00 M
19Item No.4:- Providing and laying in situ following grades of C.C. of trap/granite/quartzite/ gneiss metal for foundation and bedding including dewatering, form work, compacting and curing, finishing, etc. complete. A) P.C.C (M-150)
20Item No.5:- Providing and Casting in situ cement conce-rte of trap/ quartizer/ geneiss metalapproed quality for RCC work as per detailed drawi-ngs and designs or as directed by Engineer in-charge normal dewatering centering form work. compaction, finshing the formed surfaces with, CM 1:3 of suffcient minimum thickness to give a smooth and even surface wherever necessary or roughing if spcials finish is to be provided and curing as below etc.complete. RCC M-200 for Water Retaining structure a) for Ring Beam Bottom Ring
21a) For Verticle wall (6 m below GL & 1.50 M above G.L. Above 1.5 from G.L.
22From G.L. to Below 5 M
235 to 10 M
24Item No.6:- Providing and fixing in position steel bar rein-forcement of vareious diameters for RCC pip-es, caps, footings, foundation, slabs, beams, columns, canopies, fins, arches, etc. as per detailed desings, drawings and schedules including cutting, bending hooking the bars. binding with binding wires or tack welding and supporting as required, etc. complete. 1) Tor Steel Lift 0 to 5 M above G.L.
25Lift 0 to 5 M Below G.L.
26Lift 5 to 10 M Below G.L.
27Item No.7:- Providing Structural steel work in single stanc-hions composed of RSJ, channel etc. with caps, based, mild steel plates. angles brak-cets, as per drawing or as directed by Engi-neer-in-char-ge including cutting fabrication, making riveted / bolted welded connections and one coats of anticorrosive paint and over it two coats of oil painting etc complete. Weight of RSJ
28Item No. 8 :- Providingand fixing M.S. chequerredplate flooringof following thicknesssupported onM.S.angles(25x25x5 mmsize)includingwelding,cuttingandfabricatingthe plates to the requiredsquare or rounding shape,makingholes in the plate, includingprovidingandapplying3coatsofanticorrosivepaint,etc.completeasdirectedby Engineer-in-charge. 6 mm thick
29Item No. 9 :- Dewatering the excavated trenches and pools of water in the building trenches/pipeline tren-ches, well works by using pumps or other devices including desposing off water to safe dist-ance as directed by engineer-in-charge. ( Including cost of machinery, Labour charges etc )
30Item No. 10 :- Providing and fixing in position C.I. Dapuri ste-ps of 22 mm dia. M.S. bar step with proper an-chorage, etc. and providing and applying 3 co-ats of anticorrosive paint, etc complete as dire-cted by Engineer-in-charge.
31Item No.11:- Providing and fixing 80 mm/ 75mm. dia. A. C. / PVC pipe weeps holes at 1.5 m. c / c. sta-ggered including cost of all material and lab-our involved with all leads and lifts etc. complete.
32Item No.12:- Reffing the excavated trenches with layers of 15 to 20 cm. thick with available material from foundation including watering compacting for well etc. complete.
33Item No. 13 :-Carrying out recuperation/ yield test for asc-erting the discharge of constructed well / exca-vated profile as directed by Engineer in char-ge The test carried out by drawn down water from the well profile bellow normal sub soil water level upto full depth rise is water well profile as well as strainer suction level at pump as per design of W.S. seheme shall be recor-ded prior to the test including cost of all materials. Overhead, laborers etc. completed as directed.
34Item No.14 :- Taking Horizontal bore well of 115 mm dia and 30 M of depth (as per GSDA certificate) Horizontal Bore well 30 m length 4 No.s
35SUWORK NO. 2 :- EXISTING PWS WELLDEEPENING Item No. 1 :- Desilting the Supply Well, Intake Well / Head Works, Sump of water supply / sewerage works etc. in wet or dry condition including lifts upto 9 M and lead upto 150 M as required beyond the work site, stacking, spreading, including necessary guarding, etc. complete, as directed by Engineer-in-charge Lift 13.50 to 15.00 M
36Item No. 2 :- Excavation in general in hard material comprising off soft rock hard rock Manjara rock, etc. by blasiting controlled blasting, chiseling as required in wet or dry condition for Head works i.e. Intake well. Connecting Pipe. jack well, pump House, supply well, etc. for lift 0 to 1.5 M and lead of 150 M including barricading, guarding, disposing of surplus excavated stuff within a radius of 0.5 Km. As directedby Engineer-in-charge. Lift 15.00 to 16.50 M
37Lift 16.50 to 18.00 M
38Lift 18.00 to 19.50M
39Lift 19.50 to 21.00 M
40Item No. 3 :- Dewatering the excavated trenches and pools of water in the building trenches/pipeline tren-ches, well works by using pumps or other devices including desposing off water to safe dist-ance as directed by engineer-in-charge. ( Including cost of machinery, Labour charges etc )
41Item No. 4 :- Providing Horizontal Borewell4 nosEach 30 m length
42SUBWORK NO. 3 :- PUMPING MACHINERY FOR EXISTING WELL Item No. 1 :- Providing erecting and giving test of submersible pump set comfirming to IS 8034 & motor confirm. to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discha-rge with stainless steel shaft. Motor suitable for working on 415 V + or - 10% 3 Phase, 50 Hz, A.C.supply, with cable guard, thrust carbon / fibre bearing to with entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable discharge out let etc Submersible pump set 150 mm. diaup to15 Stage 5 HP Discharge 4299 Lits/Hour Head 39 M
43Item No. 2 :- Providing and Supplying ISI mark G.I. pipe of following class and diameter including all taxes (Central and local Insurance ,railway freight, unloading from railway wagon, loading into track transport to departmentally stores /site, unloading stacking etc. comp. Note:-One coupler shall be provided with each full length pipe cost of which included in rates below 50 mm dia G.I. Pipe Heavy Class
44Item No. 3 :- Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combinedmeter / voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc.
45Item No. 4 :- Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.
46Item No. 5 :-Providing and supplying ISI mark CI D/F reflux valves ( non- return valves ) of following dia inc-luding all taxes ( Central and Local) railway freig-ht, inspection charges unloading from railway wagon, loading into truck, transportation upto etc complete 80mm dia reflux valves
47Item No. 6 :- Providing and supply ISI Standard CI double flanged pipes including all taxes ( cental & local ). Railway freight. Insurance unloading from railway wagon, loading into truck transpot to stores / sites, unloading etccomplete as directed by Engineer- in- charge. 80 mm CIDF Pipe
48Item No. 7 :- Providing, erecting, double flange sluice valveconforming forIS 2906/14846 incuding worn gear arrangements as per tes pressure stainless steel spindlle, caps including all taxes transportation etccomplete. 80 mm CIDF Sluice Valve
49Item No. 8 :- Providing and supplying ISI standard CI flanged/ S&S specials including all taxes ( central& local) railway freight, insurance, unloading from railway wagon, loading into truck transport to dep-artmental store / site, unloading stacking etc. complete.
50SUBWORK NO. 4 :- PUMPING MACHINERY FOR NEW WELL Item No. 1 :- Providing erecting and giving test of submersible pump set comfirming to IS 8034 & motor confirm. to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discha-rge with stainless steel shaft. Motor suitable for working on 415 V + or - 10% 3 Phase, 50 Hz, A.C.supply, with cable guard, thrust carbon / fibre bearing to with entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable discharge out let etc Submersible pump set 150 mm. diaup to15 Stage 7.50 HP Discharge 15887 Lits/Hour Head 48 M
51Item No. 2 :- Providing and Supplying ISI mark G.I. pipe of following class and diameter including all taxes (Central and local Insurance ,railway freight, unloading from railway wagon, loading into track transport to departmentally stores /site, unloading stacking etc. comp. Note:-One coupler shall be provided with each full length pipe cost of which included in rates below 50 mm dia G.I. Pipe Heavy Class
52Item No. 3 :- Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combinedmeter / voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc.
53Item No. 4 :- Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.
54Item No. 5 :-Providing and supplying ISI mark CI D/F reflux valves ( non- return valves ) of following dia inc-luding all taxes ( Central and Local) railway freig-ht, inspection charges unloading from railway wagon, loading into truck, transportation upto etc complete 80mm dia reflux valves
55Item No. 6 :- Providing and supply ISI Standard CI double flanged pipes including all taxes ( cental & local ). Railway freight. Insurance unloading from railway wagon, loading into truck transpot to stores / sites, unloading etccomplete as directed by Engineer- in- charge. 80 mm CIDF Pipe
56Item No. 7 :- Providing, erecting, double flange sluice valveconforming forIS 2906/14846 incuding worn gear arrangements as per tes pressure stainless steel spindlle, caps including all taxes transportation etccomplete. 80 mm CIDF Sluice Valve
57Item No. 8 :- Providing and supplying ISI standard CI flanged/ S&S specials including all taxes ( central& local) railway freight, insurance, unloading from railway wagon, loading into truck transport to dep-artmental store / site, unloading stacking etc. complete.
58SUWORK NO. 5 :- SWITCH ROOM 3.00 x 3.00 x 3.00 M Item No. 1 :- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.Lift of 0 to 1.5 M
59Item No. 2 :- Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distace of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc complete. Lift of 0 to 1.5 M
60Item No. 3 :- Providing and laying insitu 1:2:4 (M-150) grades of P.C.C. of trap/granite/ quartzite/ genies metal for foundation / bedding including dewatering form work, compacting and curing finishing etc. complete with initial lift of 1.50 cm. below/ above ground level.
61Item No. 4 :- Providing and laying in situC.C. of trap/granite/ quartzite/ genies metal of R.C.C. works like raft. grillage, strip foundation and footing of R.C.C. columns and steel stanchi-ons including normal dewatering, from work, compaction. finishing & curing etc complete . 1) R.C.C. M- 200For coloumn footing.
62Item No. 5 :-Providing and laying in situC.C. of trap / granite / quartzite / genies metal of approved quality for R.C.C. works as per detailed drawing and designs or as directed by engineer incharge including normal dewatering, from work, compaction, finishing surfaces with C.M. 1:3 of sufficient minimum thickness& curing etc. complete. 1) R.C.C. M- 200 grade all types of columns
63Item No. 6 :- Providing and laying in situC.C. of trap/granite/ quartzite/ genies metal of approved quality for R.C.C. works as per detailed drawing and designs or as directed by engin-eer incha-rge including normal dewatering, from work, compaction, finishing surfaces the formed surfaces with C.M. 1:3 of sufficientminimum thickness& curing etc. complete. 1 ) R.C.C. M- 200grade G L beams &lintels .
64Item No. 7 :- Providing and laying in situC.C. of trap/granite/ quartzite/ genies metal of approved quality for R.C.C. works as per detailed drawing and designs or as directed by engineer incharge including normal dewatering, from work, compaction, finishing surfaces the formed surfaces with C.M. 1:3 of sufficient minimum thickness& curing etc. complete. 1 )R.C.C. M- 200 grade slabs/ & chajjaetc.
65Item No. 8 :- Providing and fixing in position steel bar reinforcement of various dia for R.C.C.work detailed designs, drawings and schedules, including cutting bending, hooking the bars binding with wires or tack welding and supporting as required etc. compelte. (including cost of binding wire)
66Item No. 9 :- Providing second class burnt brick masonry with conventional bricks in cement mortar 1:6 in foundation & plinth of inner wall/ external wall including normal dewatering striking joints on unexposed faces, racking out oints on exposed faces & watering etc. compelte. Top of GL beam to plinth
67Plinth to bottam beam
68Item No. 10 :- Filling in plinth & floors murum bedding in trenches with approved murum from excavated material from foundation 15 cm to 20 cm layer including watering and compaction etc. complete.
69Item No. 11 :- Providing and fixing steel frame of angle 40 x 40 x 5 mm size for windows with 16 mm dia. mild steel bars horizontally at 10 cm c/c for ventilator portion and 15 cm c/c for remaining portion with M.S. flat of size 40 x 6 mm vertical at center including iron hold fast boxes for fixing 40 x 6 mm vertical at center including iron hold fast boxes for fixing shutters including welding finishing painting etc. complete.
70Item No. 12 :- Providing and fixing steel frame door of angle 50 x 50 x 6 mm with mild steel bars 16 mm dia. horizontally at 10mm c/c for ventilator portion including iron hold fast boxes for fixing shutters including welding, finishing, painting etc. complete.
71Item No. 13 :- Providing and fixing steel frame door of angle 50 x 50 x 6 mm with mild steel bars 16 mm dia. horizontally at 10mm c/c for ventilator portion including iron hold fast boxes for fixing shutters including welding, finishing, painting etc. complete.
72Item No. 14 :- Providing and fixing M.S. grill door 24 Kilogram/Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc
73Item No. 15 :- Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete
74Item No. 16 :- Providing rough cast cement plaster externally intwocoatstoconcrete,brickorstone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete.
75Item No. 17 :- Refilling the trenches with availableexcavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lift including consolidation surcharging etc complete.
76Item No. 18 :- Providing and laying Rough Shahabad Stone Flooring 25mm to 30mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete
77Item No. 19 :- Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.
78Item No. 20 :- Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.
79SUWORK NO. 6 :- RISING MAIN Item No. 1 :- Excavation for foundation/ pipe trenches in earth soils of all types sand, gravel,soft murum including removing the excavated materialup to distance of 50 m & lift as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation etc complete. ( Lift up to 1.50 m )
80Item No. 2 :- Excavation for foundation/ pipe trenches in hard murum including removing the excavated material up to distance of 50 m & lift as below, stacking & spre-ading as directed by Engineer-in-charge, normal dew-atering, preparing the bed for the foundation & excludingfilling etc. complete ( Lift up to 1.50 m )
81Item No. 3 :- Excavation for foundation/ pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material up toa distance of 50 m etc complete
82Item No. 4 :-Excavation for foundation / pipe trenches in Hard rock& concrete by controlled blasting,including trimming & levelling the bed by chisseling where where lifts as below, stacking as directed by Engineer- in- charges normal dewatering, etc complete
83Item No. 5 :- Filling in plinth and floors murum bedding in trenches with approved murum fromfoundation 15 cm to 20 cm layer including watering andcompaction etc. complete.
84Item No. 6 :-Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material likeechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. A.) PE-100 a) 6 Kg/Sq. cm : 90 mm dia 6 kg/cm2 HDPE Pipe Line
85110 mm dia 6 kg/cm2 HDPE Pipe Line
86Item No. 7 :-Providing and Supplying ISI mark G.I. pipe of following class and diameter including all taxes (Central and local Insurance ,railway freight, unloading from railway wagon, loading into track transport to departmentally stores /site, unloading stacking etc. comp. Note:-One coupler shall be provided with each full length pipe cost of which included in rates below 100 mm dia.G I Pipe (Medium class)
87Item No. 8 :-Providing double flanged short body pattern type manually operated Butterfly Valve having body.disc and end cover in graded cast iron to IS-210 Gr.CF 200 generally confirming to IS-13095-1991, Synthetic rubber faced ring secured on disc by retainning ring with stainless steel screw stub shaft of stainless steel riding in teflon bearing including inspection charge transporation up to departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc.excluding C.C. foundation/structural steel support. 100 mm dia Sluice valve
88100 mm dia Non return valve
89Item No. 9 :- Providing & supplying P V C / G I / C Ispecials as per reqirmentincluding transportation chargesetc complete.
90Item No. 10 :- Providing and supplying Air Valves as per IS- 14845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete. 50 mm dia Doubleball Air valve
91Item No. 11 :- Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulicjack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 90mm dia HDPE pipe 6 Kg/cm2
92110 mm dia HDPE pipe 6 Kg/cm2
93Item No. 12 :-Lowering ,laying and jointing G.I.pipes and specials of following class and dia. C.I./M.S. specials of following dia. Including conveyance from store to site of woks all labour ,giving satisfactory hydraulic test etc comp. Either under ground or in vertical position as directed by Engineer in charge 100 mm dia.G I Pipe (Medium class)
94Item No. 13 :- Lowering laying and jointing in position following CI.D/F reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. 100 mm dia Sluice valve
95100 mm dia Non return valve
96Item No. 14 :- Providing and constructingB. B.Masonery valve chemberincluding necessary excavat-ion in all strata providing and laying P.C.C. 15 cm thick bed concrete 0.23m thick B B masonery wall in 1:6 Propetc complete and depth up to 0.90 m etc comp. 60x45x90cm
97Item No. 15 :- Providing and laying in sity 1:2:4 (M-150) grade of C.C. oftrap/granite/ quartzite/gneiss metal for foundation and bedding including dewatering form work compacting and curing finishing etc complete.
98Item No. 16 :- Providing and fixing in position air valve shaft including providingand fixing GI Medium class or 6mm thick M.S, PIPE shaft 2.70m long over branch flange of air valve tee providing PCCblock of M- 150concrete 150mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged ionts wherver required and fixing of air valve over the shaft excluding cost of air vavle and branch flanged air valve tee, etc. complete as per type desihn and as per directed by Engineer - in -charge for following diameters of pipe line
99Item No. 17 :- Refilling the trenches with availableexcav-ated stuff with soft material first over pipe line and then hard material in 15 cm layers with all leads and lift including consolidation surcharging etc complete.
100SUWORK NO. 7 :- RCC ESR Item No. 1 :- Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for ESR having capacity upto 500 cum and not more than 6 m c/c for ESRs having capacity above 500 Cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as M.S. ladder, C.I. manhole frame and covers, water level indicators, lightening conductor, G.I. pipe railing around walk way and top slab, providing spiral stair case from ground level to roof level, M.S. grill gate of 2 M height with locking arrangement of approved design, B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and anti- termite treatment for underground parts of the structure and giving satisfactory water tightness test as per I.S. code. The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-Charge. RCC ESR Cap. 38000 Liter St. H. 9 M
101Item No. 2 :- Providing and supplyingI.S.I. standered cast iron doube flanged pipes including all central and local taxed, octri inspection charges insurance railway frieght unloading from railway wagoan, loading into trucks, transport to stores, unloading stacking etc. complete. 1) 100 mm dia CIDF pipe For Outlet let & Overflow
1022) 80 mm dia CIDF pipe For inlet
103Item No. 3 :- Providing double flange sluice valve conforming forIS 2906/14846 incuding worn gear arrangements as per test pressure stainless steel spindlle, caps including all taxes transportation etccomplete. 1) 100 mm dia CIDF Sv. Valuve
1042) 80 mm dia CIDF Sv. Valuve
105Item No. 4 :- Providing and supplying ISI standard CI flanged / S& S specials including all statutory duties & taxes such as GST levied by GOI & GOM in all respect, railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store /site, unloading stacking etc. complete.D/F Specials 80 to 300mm
106SUWORK NO. 8 :- DISTRIBUSTION SYSTEM Item No. 1 :- Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). 90 mm dia 4kg/cm2 P.V.C. PIPE
107110 mm dia 4kg/cm2 P.V.C. PIPE
108Item No. 2 :- Providing & supplying at site of work CI/ PVC /GIspecials suitable for above said pipes including cost of all taxes fright chargesoctroi loading Unloading conveyanceetc.
109Item No. 3 :-Providing and Supplying ISI mark G.I. pipe of following class and diameter including all taxes (Central and local Insurance ,railway freight, unloading from railway wagon, loading into track transport to departmentally stores /site, unloading stacking etc. comp. Note:-One coupler shall be provided with each full length pipe cost of which included in rates below 80 mm dia.G I Pipe (Medium class)
110100 mm dia.G I Pipe (Medium class)
111Item No. 4 :- Providing double flanged short body pattern type manually operated Butterfly Valve having body.disc and end cover in graded cast iron to IS-210 Gr.CF 200 generally confirming to IS-13095-1991, Synthetic rubber faced ring secured on disc by retainning ring with stainless steel screw stub shaft of stainless steel riding in teflon bearing including inspection charge transporation up to departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc.excluding C.C. foundation/structural steel support. 80 mm dia Sluice valve
112Item No. 5 :-Excavation for foundation / pipe trenches in earth.Soils of all types. Sand, gravel and soft murum, including removing the excavatedmat-erial up to a distance of 50 meters andlifts as below, stacking and spreading as directed, manual dewatering, etc complete
113Item No. 6 :- Excavation for foundation / pipe trenches inhard murum including removing the excavatedmaterial up to a distance of 50 meters andlifts as below, stacking and spreading as directed, manual dewatering, preaparing the bed for foun-dation andetc complete. lift 0.00 to 1.50m
114Item No. 7 :- Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry Found-ation asphalt road including removing the exca-vated materialup to a distance of 50 m beyond area and lifts as below, stacking as directed by Engineer- in- charges etc complete lift 0.00 to 1.50m
115Item No. 8 :- Excavation for foundation / pipe trenches in Hard rock& concrete by chiselling,line drilling by wedding , by mechanical means or by all means other than mechnical means including trimming & levelling the bed by chisseling where where lifts as below,etc complete. lift 0.00 to 1.50m
116Item No. 9:- Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction etc complete.
117Item No. 10 :- Lowering laying and jointing PVC pipes and specials of following class and diameter inclu-ding cost of all labour, material, except cement solvent, rubber ring, giving satisfactory hydr-aulic testing as per Iscodewith cement solvent joint etc complete 90 mm dia 4kg/cm2 P.V.C. PIPE
118110 mm dia 4kg/cm2 P.V.C. PIPE
119Item No. 11 :-Lowering ,laying and jointing G.I.pipes and specials of following class and dia. C.I./M.S. specials of following dia. Including conveyance from store to site of woks all labour ,giving satisfactory hydraulic test etc comp. Either under ground or in vertical position as directed by Engineer in charge 80 mm dia.G I Pipe (Medium class)
120100 mm dia.G I Pipe (Medium class)
121Item No. 12 :- Lowering laying and jointing in position following CI.D/F reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete, 80 mm dia Sluice valve
122Item No. 13 :- Providing and fixing C.I. road box including loading, unloading and carting to site of workincluding all necessary excavation in all typesof strata and fixing in murum packing, etc.complete. 100 mm x 225 mm (20 kg)
123Item No. 14 :- Providing and constructingB. B.Masonery valve chemberincluding necessary excavat-ion in all strata providing and laying P.C.C. 15 cm thick bed concrete 0.23m thick B B masonery wall in 1:6 Propetc complete and depth up to 0.90 m etc comp. 60x45x90cm
124Item No. 15 :- Providing and laying in sity 1:2:4 (M-150) grade of C.C. oftrap/granite/ quartzite / gneiss metal for foundation and bedding including dewatering form work compacting and curing finishing etc complete
125Item No. 16 :- Refilling the trenches with availableexcavated stuff with soft material first over pipelineand then hard material in 15 cm layers with all leads and lift including consolidation surcharging etc complete
126SUBWORK NO. 9 :-NAME BOARD Item No. 1 :- Providing and fixing board displaying information, such as "Name of work, Tender cost, Name of Contractor, Work completion and liability period etc", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge
127SUBWORK NO. 10 :-TRIAL & RUN Item No. 1 :- Commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and for regional scheme, together with training of personnel spared by MJP / Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge.
128Item No. 2 :- MSEB Charges Pure Water P/Mach
129Item No. 3 :- Material Bleaching Powder
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail