}

Construction Of Combined Office Building For Pwd Sub-Division And Revenue Deptt. At Tapri Distt. Kinnaur H.P. ( Sh- C / O Building Portion I / C Ws And Si, Septic Tank, Rain Water Harvesting Tank And Site Development Etc. ) , Kinnaur-Himachal Pradesh

Public Works Department-PWD has published Construction Of Combined Office Building For Pwd Sub-Division And Revenue Deptt. At Tapri Distt. Kinnaur H.P. ( Sh- C / O Building Portion I / C Ws And Si, Septic Tank, Rain Water Harvesting Tank And Site Development Etc. ) . Submission Date for this Tender is 16-08-2022. Building Work Tenders in Kinnaur Himachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

33436125
Construction Of Combined Office Building For Pwd Sub-Division And Revenue Deptt. At Tapri Distt. Kinnaur H.P. ( Sh- C / O Building Portion I / C Ws And Si, Septic Tank, Rain Water Harvesting Tank And Site Development Etc. )
Open Tender
Indian
Himachal Pradesh
Kinnaur
16-08-2022

Tender Details

Construction Of Combined Office Building For Pwd Sub-Division And Revenue Deptt. At Tapri Distt. Kinnaur H.P. ( Sh- C / O Building Portion I / C Ws And Si, Septic Tank, Rain Water Harvesting Tank And Site Development Etc. )

Key Value

Document Fees
INR 5000 /-
EMD
INR 386392.0 /-
Tender Value
INR 1.93 Crore /-

BOQ Items

Name of Work: Construction of combined office Building for PWD Sub-Division & Revenue Deptt. at Tapri Kinnaur(H.P.) (SH:- C/o building portion i/c WS & SI septic tank, rain water harvestion tank and site development etc.)
Sl. No. Item Description
1Cutting in earth work in by mechanical mean in all heights and depths in all kinds of soils, including saturated soils comprising of pick work , Jumper work and blasting workboth in soft and hard rock with chiseling and wedging out of rock (Where blasting is prohibited) and their intermediate classificationof soil including, dewatring where required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in - charge at site,according to the HP.PWD. specification of 1990( One Thousand Nine Hundred ninety) Volume-I (One)and sorting out useful and unuseful matreial and Transportation of the unuseful matreial for disposing at dumping site ( To be arranged by the Contractor) as per satisfacation of Engineer -in- Charge through all modes of transportationincluding head load , animal load or mechnical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the workby mechnical means and labour( If required). All useful material such as stone , shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation as per direction of the Engineer -in -charge .Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have tobe duly compensated by him in all respect including all incidental charges.
2Excavation in earth work in all kind of soils and banking in 20(twenty) centimetres layers including breaking clods, ramming and dressing ground for the purpose of making embankment or filling up ground depressionsand disposal of all surplus excavated earth by all modes of transportation up to approved dumping site which will be arranged by the contractor at his own cost upto all leads and lifts including carriage of materials.
3Excavation in foundation and trenches in earth work in all heights and depth in allkinds of soil, by mechanical meansincluding saturated soil comprising of pick,jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock ( where blasting is prohibited) and their intermediate classification of soil including, dewatering where ever required, setting out to the required line, grades, side slopes trimming bottoms and level as shown on the drawing as directed by the Engineer-in-Charge at site according to HP.PWD specifications of 1990 Volume-1 and sorting out useful materials and stacking the same in all leads and lifts and transportation of the unusefull materials on approved dumping sites through all modes of transportation including head load , animal load or mechanical means along with its leveling fine dressing and all lobour , machineries, materials, tools equipments and safety measures and iincidentials necessary to complete the work by mechanized means and labour (if any required) all useful materials such as stones , shingles, aggregates, and slates shall be sorted out and stacked in the plot up to maximum extent, complete as per HP. PWD. specifications of 1990 (one thousand nine hundred ninty)volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
4Supplying and filling in plinth with sand under floors, including watering, ramming,consolidating and dressing complete as per HP. PWD. specifications of 1990 (one thousand nine hundred ninty)volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
5Providing form work with steel plates 3.15mm. (Three point fifteen milimetre) thick welded with angle iron in frame 30X30mmx5mm.(Thirty into thirty intofive millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden/ steel battens and ballies, height of propping and centring below supporting floor to ceilingto any floor height and removal of the same for in situ-reinforced concrete and plain concrete work and as per HP. PWD. specifications of 1990(one thousand nine hundred ninty ) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.5.1 in foundation, footings, bases of columns etc. and mass concrete
6In flat surfaces such as soffits of suspended floors, roofs, landings and the like of any thickness in all floor level in all heights.
7In vertical surface such as wall (any thickness) partition and the like including attached pilastersinall floor level in all heights.
8In columns, pillars, posts and struts. square, rectangular,circular or polygonal in plan, in all floor level in all heights.
9In beams, cantilevers, girders and lintels sides and soffits of beams, beam hunchings, cantilevers, bressumers and lintelsup to any depthinall floor level in all heights.
10In edges of slabs and breaks in floors of any widthin all floor level in all heights.
11In stair cases with sloping or stepped soffits excluding landingsin all floor level in all heights.
12Providing and laying cement concrete 1:4:8 (one cement :four sand :eight graded stone aggregate 40(forty)mm (milllimeter) nominal size) mechanically mixed and vibrated for compacting concrete and curing complete excluding cost of centring and shuttering including carriage of materials in all leads and lifts in foundation and plinth.
13Providing and laying cement concrete 1:6:12 (one cement : six sand : twelve graded stone aggregate 40(forty)mm (milllimeter) nominal size) mechanically mixed and vibrated for compacting concrete and curing complete excluding cost of centring and shuttering including carriage of materials in all leads and lifts in foundation and plinth.
14Providing and laying cement concrete 1:3:6 (one cement: three Sand:six graded stone aggregate 20(twenty)mm nominal size)mechanically mixed and vibrated for compacting concrete and curing complete excluding cost of centring and shuttering in foundation and plinth including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
15Making plinth protection 50(fifty)mm thick of cement concrete 1:3:6 (one cement : three coarse sand :six graded stone aggregate 20(twenty) mm (millimeter)nominal size) over 75(seventy five)mm (millimeter) thick bed of dry brick ballast 40(forty) mm (millimeter) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.complete as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge.
16Providing and laying cement concrete 1:1.5:3 (one cement isto one point five sand isto three crushedstone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing completeexcluding cost of form work and reinforcement for reinforced concrete work complete as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge. In foundation footings bases of columns etc. and mass concrete
17In columns, pillars, posts and struts. Square, rectangular or polygonal in plan,in all floor level in all heights.
18In suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor all level.
19Providing tor/TMT steel reinforcement of TATA tiscon / SAIL /Rashtria Ispat /Jindal / Shyam including cost of binding wire for R.C.C.work includingbending, binding and placing in position complete in all floor level in all heights,and as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
20Providing and laying BrickworkwithcommonburntclayF.P.S. (nonmodular)bricksofclass designation 7.5(seven point five) in superstructure above plinth level up to floor all level in all shape s and sizes inCement mortar 1:6 (one cement : six coarse sand) including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge
21Providing and laying Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5(seven point five) in superstructure above plinth level up to floor all level Cement mortar 1:4 (one cement :four coarse sand) including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge
22Squared Rubble Masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in cement mortar 1:5 (one cement: Five sand).including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.
23Providing and laying Random rubble masonry / polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement : six sand : twelve crushed stone aggregate 20mm (Twenty millimeter nominal size) at plinth level in Cement Mortar 1:6 (One cement: six sand) complete as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
24Coursedrubblemasonry work (first sort), in cement mortar 1:6 (1 cement : 6 coarse sand)withhard stone(first orsecond sort)in superstructure above plinth level and upto floor all level.complete as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
25Boulder filling dry hand packed tightly under floor complete as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
26Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) (Deodar wood 1st class) complete upto floor all level as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
27Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :(Sal wood) complete upto floor all level as per HP. PWD. specifications of 1990 (one thousand nine hundred ninty)volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
28Providing and fixing 19mm (ninteen millimeter) thick Commercial Board water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etc complete) upto floor all level as per HP. PWD. specifications of 1990 (one thousand nine hundred ninty)volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
29Providingandfixing19 mm (ninteen millimeter) thick waterproof comercial board in shelves/box for cup board with but joints and fixing with nails and screws etc complete upto floor all level as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
30Providing and fixing 25mm (twenty five millimeter) thick pre-laminated medium density fibre board exterior grade ( Grade-I) IS:14587:1998(indian standard:fourteen thousand five hundred eighty seven:one thousand nine hundred ninty eight) marked with one side decorative and other side balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm(two millimeter) thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 (indian standard: three thousand eight hundred eightneen)marked with necessary screw etc all complete upto floor all level as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
31Providingandfixing25mm (twenty five millimeter) thick waterproof comercial board in shelves/box for cup board with but joints and fixing with nails and screws etc complete upto floor all level as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
32Providing and fixing 1.00 mm(one millimeter) thick coloured or plain lamination sheet (sunmica) on board /plywood sheets with approved adhesive and nails etc. complete upto floor all level as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
33Providing and fixing water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) complete upto floor all level as per HP. PWD. specifications of 1990 (one thousand nine hundred ninty)volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
34Providign and fixing plywood lining with butt joint and nails frame work and corner fillets to be measured and paid for seprately) complete upto floor all level as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
35Providing and fixing 2nd class teak wood 50x12 mm(fifty into twelve millimeter) wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete upto floor all level as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
36Providing and fixingpanelled glazed of panelled and glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws complete 40mm (forty milimetre)thick 2nd class deodar wood complete upto Floor to all level including all leads,lifts and carriage of materials completeas per entire satisfaction of the Engineer.
37Providing and fixing 35 (thirty five) mm (millimeter)thick ISI marked flush door shutters conforming to IS : 2202 (indian standard:two thousand two hundred two) (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3(three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.including ISI marked Stainless Steel butt hinges with necessary screws complete upto floor all level as per HP. PWD. specifications of 1990 (one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
38Providing and fixing Anodised aluminium sheet 2.5mm(two point five) thick (anodised transparent or dyed to required shade according to IS: 1868 (one thousand eight hundred sixty eight),indian standard: one thousand eight hundred sixty eight)Minimum anodic coating of grade AC 15(fifteen) machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holedforreceivingdashfastener,overexpansionjointsonvertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm(two millimeter) thick & 15(fifteen) mm dia , at a staggered pitch of 200mm centre to centre complete upto floor all level as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
39Providing and fixing upvc casement windiows profile specification outer frame 12601 (70X64mm)(seventy into sixty four)sash 12617(twelve thousand six hundred seventeen) (70x70mm)( seventy into seventy) Z mullion -3086(three thousand eighty six hundred) (70x50mm)(seventy into fifty),coupling -12358(twelve thousand three hundred fifty eighty) (70mm)(seventy millimeter) including shutter with chamber thickness 2.60mm(two point six zero millimeter) and wire gauge shutter wiyh G.I. frame thicknees 1.20 to 2mm(one point two zero to two millimeter) and 6mm+12mm +6mm(six pluse twelve pluse six millimeter) DGU toghuned glass gap filled with argon gas fixed thermoplastic eastomer (TPE) gasket including zinc alloy casement handle ,friction stay/2d hinges/butt hinges, espag multipoint locking system,locking strikers complete complete upto floor all level as per HP. PWD. specifications of 1990 (one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
40Providing and fixing 8mm (Eight milimeter) cement bonded particle board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid separately) in place of E-board for ceiling for toilet,attic and porch with Everest sheetincluding carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
41Providing and fixing40x5 mm(forty into five) flat iron hold fast 40 cm(forty centimeter) long including fixing to frame with 10 mm(ten millimeter) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (one cement : three coarse sand : six graded stone aggregate 20mm nominal size).complete upto floor all level as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
42Providing and fixing aluminium sliding door boltanodized transparent or dyed to required shade and colour with bolts and nuts screws etc.complete upto floor all level as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. 34.1300x16 mm (three hundred into sixteen millimeter)
43250x16mm (two hundred fifty into sixteen millimeter)
44Providing and fixingaluminium tower bolts (Berrel type) anodized transparent or dyed to required shade and colour with screws etc. complete upto floor all level as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. 35.1 250x10mm (two hundred fifty into ten milimeter)
45200x10mm (two hundred into ten millimeter)
46Providing and fixing aluminium handles anodized transparent or dyed to required colour or shade with necessary screws etc. complete upto floor all level as per HP. PWD. specifications of 1990 (one thousand nine hundred ninty) volume-I (one)including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. 36.1 125 mm (one hudred twenty five milimeter)
47100mm (one hundred millimeter)
48Providingandfixing 150x10 mm(one hundred fifty into ten millimeter) brightfinishedbrass towerbolts (barrel type)with necessary screws etc. complete upto floor all level as per HP. PWD. specifications of 1990 (one thousand nine hundred ninty)volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
49Providing and fixing 125 mm(one hundred twenty five millimeter) bright finished brass handles with screws etc. complete upto floor all level as per HP. PWD. specifications of 1990 (one thousand nine hundred ninty)volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
50Providing and fixing bright finished brass 100mm(one hundred millimeter) Mortice latch and lock and a pair of levers, handles with necessary screws etc. complete (indian make of approved quality) complete upto floor all level as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
51Providing and fixing PTMT door catcher of length 72 mm(seventy two millimeter) and dia. Of42 mm(forty two millimeter) with suitable washers weighing not less than 33(thirty three) gms complete upto floor all level as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
52Providing and laying Precast terrazo tiles 22 mm(twenty two millimeter) thick with graded marble chips of size upto 12 mm(twelve millimeter),laid in floors, and landings, jointed withslurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm(twenty millimeter) thick bed of cement mortar 1:4 (one cement:four coarse sand) : Light shade pigment using white cement neat cement complete upto floor all level as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
53Providing and laying Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate) 40 mm(forty millimeter) thick with 20 mm(twenty millimeter) nominal size stone aggregate finished with a floating coat of neat cement, including cement slurry,but excluding the cost of nosing of steps etc. complete upto floor all level as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
54Providing and laying Vitrified tiles in sizes 500x500 mm(five hundred into five hundred millimeter) (thickness to be specified by manufacturer), with water absorption less than 0.08 (zero point zero eight)% and conforming to I.S. 15622 indian standard: fifteen thousand six hundred twenty two), of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3(three point three) kg/ sqm including grouting the joint with white cement & matching pigments etc. complete upto floor all level as per HP. PWD. specifications of 1990 (one thousand nine hundred ninty)volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
55Providing and fixing 2mm(two millimeter) thick PVC antistatic venyl Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) complete upto floor all level as per HP. PWD. specifications of 1990(onethousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
56Providing and laying Vitrified tiles in sizes 600x600 mm(six hundred into six hundred millimeter) (thickness to be specified by the manufacturer), with water absorption less than 0.08%(zero point zero eight percent) and conforming to IS: 15622,indian standard:fifteen thousand six hundred twenty two)ofapproved brand &manufacturer, in allcolours andshade,in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477,indian standard:fifteen thousand four hundred seventy seven) in average 6 mm thickness, includinggroutingofjoints (Paymentforgroutingofjointstobemade separately) complete upto floor all level as per HP. PWD. specifications of 1990 (one thousand nine hundred ninty)volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
57Providing and laying 25 mm (Twenty fivemilimetre) thick pre polished Kota stone slab flooringwith20mm (twenty milimetre ) thick base of cementmortor 1:4 (onecement is to four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab and as per HP. PWD. specifications of 1990 (one thousand nine hundred ninty)volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
58Providing and laying 40 mm(forty millimeter) thick fine dressed Red sand stone flooring over 20mm (twenty millimeter)(average) thick base of cement mortar 1:5 (one cement : five coarse sand) with joints finished flushcomplete upto floor all level as per HP. PWD. specifications of 1990 (one thousand nine hundred ninty)volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge..
59Providing and fixing 6mm (six milimeter) cement bonded particle board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid separately) in place of E-board for ceiling for toilet,attic and porch with Everest sheet complete upto floor all level as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
60Providing and laying Kota stone slabs 20 mm(twenty millimeter) thick in risers of steps, skirting, dado and pillars laid on 12 mm(twelve millimeter) (average) thick cement mortar 1:3 (one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete upto floor all level as per HP. PWD. specifications of 1990 (one thousand nine hundred ninty)volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
61Providing and laying Precast terrazo tiles 22 mm (twenty two millimeter)thick with graded marble chips of sizes upto 12 mm,(twelve millimeter) in skirting and risers of steps not exceeding 30 cm(thirty centimeter) in height, on 12 mm(twelve millimeter) thick cement plaster 1:3 (one cement : three coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Light shade pigment using white cement with all complete upto floor all level as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
62Providing and laying Duro stone vetrified tiles (300x300mmx10mm)(three hundred into three hundred into ten millimeter) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete upto floor all level as per HP. PWD. specifications of 1990 (one thousand nine hundred ninty)volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
63Providing and laying White glazed tiles 6 mm(six millimeter) thick in skirting risers of steps and dado 12 mm (twelve millimeter)thick cement mortar 1:3 (one cement :three sand) and jointed with cement slurry complete upto floor all level as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
64Providing and fixing polycarbonatd tranparent sheet 1.20mm (one point two zero millimeter)thick in roofing with galvanised J or L hooks bolts and nuts with G.I. Limpe and bitumen rubber washer complete with all accessories as required as per direction of Engineer-in-Charge.complete upto floor all level as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
65Providing and fixing 0.60mm(zero point six zero millimeter) thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20(twenty) microns over 5 (five)microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm(six millimeter) dia metre with prepainted limpet and rubber washers complete with all accessories as required as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
66Providing and fixing ridges or hips 60 cm(sixty centimrter) over all with 0.45mm (zero point four five millimeter)thick prepainted steel sheets of TATA DURASHINE in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20(twenty) microns over 5(five) microns primer coating+ back coat of polyster of 5 microns over 5(five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6 mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge.
67Providing and fixing valley 90 cm(ninty centimeter) over all 0.45 mm(zero point four five) thick prepainted steel sheet of TATA DURASHINE in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5(five) microns over 5(five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm(six millimeter) dia with prepainted G.I. limpet and bitumen whashers complete as per HP. PWD. specifications of 1990 (one thousand nine hundred ninty)volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
68Providing and fixingM.S. B.P. sheet 2 mm(two millimeter) thick in eaves board / facia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete (Base members of steel work shall be measured & paid separately) as per HP. PWD. Specifications of 1990(one thousand nine hundred ninty) vplume-Iincluding carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and liftsand as per direction of Engineer-in- Charge.
69Providing laying steel work of TATA,SAIL or RASHTRIYA ISPAT welded in built up section/ hollow section trusses & framed work, including cutting,hoisting & fixing in position including applying a priming coat of red lead paint inbeams joists channels, angles, tee,flats with connecting plates or angle cleats as in main and cross beams, hip and rafters,purlins connected to common rafters and the likeas per HP. PWD. specifications of 1990(one thousand nine hundred ninty) vplume-Iincluding carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and liftsand as per direction of Engineer-in- Charge.58.1 In hand rail approved size by welding etc. to steel ladder railing balcony railling staircase railing and similar works including applyig a priming coat of approved steel.
70In gratings, framed, guards, bars ladders and railing, brackets and similar works.
71In truss and trused purlins in buildings.
72Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade.Two or more coat applied @ 0.90 ltr/10 sqm(zero point ninty litre per ten square meter) over an under coat of primer applied @ 0.80 ltr/10 sqm (zero point eight zero litre per 10(ten) squar meter)of approved brand and manufacture.including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
73Painting with oil type wood preservative of approved brand (excluding priming coat) two coats complete as per HP. PWD. specifications of 1990(one thousand nine hundred ninty) volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
746mm ( six milimetre ) cement plaster to ceiling with cement mortar 1:3 ( One cement : three approved sand ) as per HP.PWD., specification 1990(one thousand nine hundred ninty) Volume-I ( one )including carriage of all labourequipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
7515mm(fifteen millimeter) cement plaster in single coat on fair side of brick/concrete walls for internal plastering including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) up to all heights in all floor levels complete with scaffolding works in all leads and lifts including carriage of material and as per the direction of the Engineer-in-Charge.
7615mm (fifteen milimetre) cement plaster in single coat on rough side of brick/ concrete/ stone walls of interior plastering upto floor two level including arrises,internal rounded angles, chamfers & rounded angles not exceeding 80mm in (eighty milimetre) grith finished even and smooth in cement mortar 1:4(One cement:four approved sand) as per HP.PWD., specification volume-I (one ) including carriageof all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
77Providing and applying white cement based putty of average thickness 1 mm,(one millimeter)ofapprovedbrandandmanufacturer,overtheplastered wallsurfaceto prepare the surface even and smooth complete as per HP.PWD., specification volume-I (one ) including carriageof all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge
78Distempering with dry distemper of approved brand and manufacture (two or morecoats)ofrequiredshadeonnewwork,overandincludingwater thinnable priming coat to give an even shade complete as per HP.PWD., specification volume-I (one ) including carriageof all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge
79Distempering two coatswith oil bound washable distemper of Asian paints or equivalent of approved shadeand manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer completefor all floorsincluding entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.
80Wall painting two coats with premium acrylic emulsion paint of interior grade, having VOC(VolatileOrganicCompound)contentless than50(fifty)grams/ litreof approvedbrandandmanufacture,includingapplyingadditionalcoats wherever required to achieve even shade and colour completefor all floorsincluding entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.
81Wall painting two or more coats on new work with acrylic emulsion paint of approved brand and manufacture to give an even shade :completefor all floorsincluding entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.
82Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials up to all heights in all floor levels complete with scaffolding works in all leads and lifts including carriage of material and as per the direction of the Engineer-in-Charge.
83Construction coursed rubble hammer dressed U shaped open surface drain with side wall 15x22 cm(fifteen into twenty two centimeter) in cement mortar 1:6(one :six) and inside plastering with cement mortar 1:3(one:three) including earth work and laying 10 cm (ten centimeter)cement concrete in 1:5:10 (one:five:ten)of 40 mm(forty millimeter) nominal size and 7.5 cm(seven point five centimeter) cement concrete 1:2:4 (one cement :two approved sand : four graded crushed stone aggregate of 20 mm(twenty millimeter) nominal size ) and finished with a floating coat of neat cement complete as per standard design. completefor all floorsincluding entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.
84Providing and fixing 1620(one thousand six hundred twenty) (20(twenty) mm OD) pipe Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, indian standard: fifteen thousand four hundred fiftyU.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80(eighty)°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00(one point zero zero) metre spacing. This includes testing of joints complete as per direction of the Engineer in charge.completefor all floorsas per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materialsto various location through all leads,lifts & otherincidental charges complete as per entire satisfaction of the Engineer-in-charge.
85Providing and fixing 2025(two thousand twenty five) (25(twenty five millimeter) mm OD) pipe Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00(one point zero) metre spacing. This includes testing of joints complete as per direction of the Engineer in charge.completefor all floors as per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materialsto various location through all leads,lifts & otherincidental charges complete as per entire satisfaction of the Engineer-in-charge.
86Making connection 25(twenty) to 40(forty) mm nominal bore of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc.completefor all floorsas per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materialsto various location through all leads,lifts & otherincidental charges complete as per entire satisfaction of the Engineer-in-charge.
87Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stopto be paid separately) completefor all floorsincluding entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge
88Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701(twelve thousand seven hundred one) marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.completefor all floorsincluding entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge
89Providingandfixing Sand cast iron S&S as per IS: 3989 indian standard:three thousand nine hundred eighty nine100 mm(hundred millimeter)inlet and 100 mm(hundred millimeter) outlet trapofselfcleansingdesign with screwed downor hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :completefor all floorsas per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materialsto various location through all leads,lifts & otherincidental charges complete as per entire satisfaction of the Engineer-in-charge.
90Providing and fixing 110mm(one hundred fifty millimeter) dia. diameter on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 indian standred:thirteen thousand fivehundred ninty two Type A, including jointing with seal ring conforming to IS : 5382,indian standard:five thousand three hundred eighty two leaving 10 mm gap for thermal expansion, Single socketed pipes completefor all floorsincluding entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge
91Providing and fixing 110mm(one hundred ten millimeter) dia.PVC(Polyvinyl chloride) single equal branch with oval access door, ISI(Indian Standards Institute)marked insertion rubber washer 3mm (three millimeter) thick bolts and nuts complete including fixing with aprooved adhesive etc. completefor all floorsas per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materialsto various location through all leads,lifts & otherincidental charges complete as per entire satisfaction of the Engineer-in-charge.
92Providing and fixing 110mm(one hundred ten millimeter) dia. PVC (Polyvinyl chloride) door bend with oval access door,insertion rubber washer 3mm(three millimeter) thick bolts and nuts ISI(Indian Standards Institute) marked complete including fixing with aprooved adhesive etc.complete including fixing with aprooved adhesive etc. completefor all floorsas per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materialsto various location through all leads,lifts & otherincidental charges complete as per entire satisfaction of the Engineer-in-charge.
93Providing and fixing 110mm(one hundred ften millimeter) dia. PVC (Polyvinyl chloride)collars ISI(Indian Standards Institute) marked including fixing with aprooved adhesive etc completefor all floorsincluding entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge
94Providng and fixing 110mm(one hundred ten millimeter) dia. PVC plain bend ISI marked including fixing with approved adhesive etc.completefor all floorsincluding entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge
95Providing and fixing 110mm(one hundred ten millimeter) dia. offset 45 (forty five)degree PVC (Polyvinyl chloride) ISI(Indian Standards Institute) marked including fixing with aprooved adhesive etc completefor all floorsas per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materialsto various location through all leads,lifts & otherincidental charges complete as per entire satisfaction of the Engineer-in-charge.
96Providing and fixing 110mm(one hundred ten millimeter) dia. PVC (Polyvinyl chloride) clamps ISI (Indian Standards Institute) marked of approved design with steel screws and rawal plugs etc.completefor all floorsias per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materialsto various location through all leads,lifts & otherincidental charges complete as per entire satisfaction of the Engineer-in-charge.
97Providing and fixingWhite Vitreous china Orissa pattern W.C. pan of size type foot rests 580x440 mm (five hundred eighty into four hundred forty millimeter)with integral water closet squatting pan (Indian type W.C. pan of CERA, HINDWARE, PARRYWARE, make ) with 100 (hundred)mm sand cast Iron P or S trap, 10(ten) litre low level white P.V.C. flushingcistern, including flush pipe, with manually controlled device (handle lever) conformingtoIS:7231,indian standard:seven thousand two hundred thirty onewithallfittingsandfixturescomplete, including cutting and making good the walls and floors wherever required:completefor all floorsas per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materialsto various location through all leads,lifts & otherincidental charges complete as per entire satisfaction of the Engineer-in-charge.
98Providing and fixing white vitreous china flat back or wall corner type lipped front urinal urinal basin with 5(five) litre white P.V.C. automatic flushing cistern 430x260x350 mm(four hundred thirty into two hundred sixty into three hundred fifty millimeter and 340x410x265 mm(three hundred forty into four hundred ten into two hundred sixty five millimeter sizes respectively withautomaticflushingcisternwithstandardflushpipeandC.P.Brassspreaders with brass unions and G.I clamps complete, including painting offittings and brackets, cutting and making good the walls and floors wherever required completefor all floorsas per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materialsto various location through all leads,lifts & otherincidental charges complete as per entire satisfaction of the Engineer-in-charge.
99Providing & fixing Vitreous China wash basin with single hole forpillar tap with C.I. Or M.S. brackets painted white including cutting holes & making good the same but excluding fitting flat back white shade No. 102012 of clear size 580 x 400mm ( five hundred eighty into four hundred milimetre ) with pedestal of Hindware or its equivelent as per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materialsto various location through all leads,lifts & otherincidental charges complete as per entire satisfaction of the Engineer-in-charge.
100Providing and fixing 600x450x200 mm(six hundred into four hundred fifty into two hundred millimeter white vitreous china laboratory sink including making all connections excluding cost of fittings complete all flooras per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materialsto various location through all leads,lifts & otherincidental charges complete as per entire satisfaction of the Engineer-in-charge.
101Providing and fixing 32 mm(thirty two millimeter) dia C.P. brass chain and rubber plug complete for sink or wash basin complete all flooras per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materialsto various location through all leads,lifts & otherincidental charges complete as per entire satisfaction of the Engineer-in-charge.
102Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete all flooras per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materialsto various location through all leads,lifts & otherincidental charges complete as per entire satisfaction of the Engineer-in-charge.
103Providing & fixing 600mm x 450mm ( six hundred milimetre into four hundred fifty milimetre ) bevelled edge mirrior of superior glass mounted on 6mm (six milimeter ) thick A.C. sheet or plywood sheet & fixed to wooden plugs with C.P.brass screws & washers complete all floor as per HP.PWD., specification Volume-I (one) including carriage ofall labour equipment &materials to various location through all leads,lifts & other incidentalcharges complete as per entire satisfaction of the Engineer-in-charge.
104Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm (six hundred millimeter) long towel rail with total length of 645 mm (six hundred forty five millimeter), width 78 mm (seventy eight millimeter) and effective height of 88 mm (eighty eight millimeter), weighing not less than 190 gms (one hundred ninty grams).complete all floor as per HP.PWD., specification Volume-I (one) including carriage ofall labour equipment &materials to various location through all leads,lifts & other incidentalcharges complete as per entire satisfaction of the Engineer-in-charge.
105Providingandfixing 600x120x5 mm (six hundred into one twenty into five millimeter)glass shelfwithedgesroundoff, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (forty millimeter) long screws, rawl plugs etc., complete all floor as per HP.PWD., specification Volume-I (one) including carriage ofall labour equipment &materials to various location through all leads,lifts & other incidentalcharges complete as per entire satisfaction of the Engineer-in-charge.
106Providing and fixing PTMT soap Dish Holder having length of 138mm,( one hundred thirty eight millimetre )breadth 102mm ( one hundred two millimetre )height of 75mm ( seventy five millimetre)with concealed fitting arrangements, weighing not less than 106 gms. ( one hundred six gram)etc., complete all floor as per HP.PWD., specification Volume-I (one) including carriage ofall labour equipment &materials to various location through all leads,lifts & other incidentalcharges complete as per entire satisfaction of the Engineer-in-charge.
107Providing and fixing 15mm(fifteen millimeter) dia brass bib cock with capstan head of approved quality with fitting complete all floor as per HP.PWD., specification Volume-I (one) including carriage ofall labour equipment &materials to various location through all leads,lifts & other incidentalcharges complete as per entire satisfaction of the Engineer-in-charge.
108Providing and fixing 15mm ( fifteen millimetre)dia C.P.(chrome plated Cera/Jaquar/ Finolex / hindware Make ) long nose brass bib cock of approved quality conforming to IS standards and weighing not less than 810 gms(eight hundred ten grams etc. complete all floor as per HP.PWD., specification Volume-I (one) including carriage ofall labour equipment &materials to various location through all leads,lifts & other incidentalcharges complete as per entire satisfaction of the Engineer-in-charge.
109Providing and fixing 15mm ( fifteen millimetre)dia. C.P.(chrome plated Cera/Jaquar/ Finolex / hindware Make ) brass stop cock (concealed) of standard design and of approved quality etc. complete all floor as per HP.PWD., specification Volume-I (one) including carriage ofall labour equipment &materials to various location through all leads,lifts & other incidentalcharges complete as per entire satisfaction of the Engineer-in-charge.
110Providing and fixing uplasticised PVC (Polyvinyl chloride) connection pipe with brass unions 30cm ( thirty centimetre ) length 15mm (fifteen millimetre) nominal bore Cera/Jaquar/ Finolex / hindware Make complete all floor as per HP.PWD., specification Volume-I (one) including carriage ofall labour equipment &materials to various location through all leads,lifts & other incidentalcharges complete as per entire satisfaction of the Engineer-in-charge.
111Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand : three graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand : eight graded stone aggregate 40 mm(forty millimeter) cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 120x90 cm(one hundred twenty into ninty centimeter and 90 cm(ninty centimeter) deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg(two hundred eight killogram) (weight of cover 108 kg(one hundred eighty killo gram) and weight of frame 100 kg)(hundred killo gram :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5(seven point five) complete all floor as per HP.PWD., specification Volume-I (one) including carriage ofall labour equipment &materials to various location through all leads,lifts & other incidentalcharges complete as per entire satisfaction of the Engineer-in-charge.
112Providingandfixing 100 mm (one hundred millimeter)diaPVC (Polyvinyl chloride) bendofrequireddegreewithaccess door,insertion rubber washer 3 mm(three millimeter) thick, bolts and nuts complete all floor as per HP.PWD., specification Volume-I (one) including carriage ofall labour equipment &materials to various location through all leads,lifts & other incidentalcharges complete as per entire satisfaction of the Engineer-in-charge.
113Providing and fixing 100mm(one hundred millimeter) PVC (Polyvinyl chloride) Cowl complete all floor as per HP.PWD., specification Volume-I (one) including carriage ofall labour equipment &materials to various location through all leads,lifts & other incidentalcharges complete as per entire satisfaction of the Engineer-in-charge.
114Supplying and fixing 455x610 mm(four hundred fifty five into six hundred ten millimeter) rectangular R.C.C(reinforced cement concrete) cover (light duty) the weight of the cover to be not less than 23 kg (twenty three killogram)without frame for manholes :complete all floor as per HP.PWD., specification Volume-I (one) including carriage ofall labour equipment &materials to various location through all leads,lifts & other incidentalcharges complete as per entire satisfaction of the Engineer-in-charge.
115Supplying and stacking 53 mm to 22.4 mm(fifty three to twenty two point four millimeter) size stone aggregate at site.complete as per HP.PWD., specification Volume-I (one) including carriage ofall labour equipment &materials to various location through all leads,lifts & other incidentalcharges complete as per entire satisfaction of the Engineer-in-charge.
116Providing and fixing 110mm(one hundred fifty millimeter) dia. diameter on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 indian standred:thirteen thousand fivehundred ninty two Type A, including jointing with seal ring conforming to IS : 5382,indian standard:five thousand three hundred eighty two leaving 10 mm gap for thermal expansion, Single socketed pipes completefor all floorsincluding entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge
11775 mm (seventy five millimeter) thickbackfillingforpitchingincluding supplying of required materials and consolidation etc. complete with :Stone aggregate 20 mm (twenty millimeter)nominal size and Stone aggregate 40 mm (forty millimeter)nominal size complete as per HP.PWD., specification Volume-I (one) including carriage ofall labour equipment &materials to various location through all leads,lifts & other incidentalcharges complete as per entire satisfaction of the Engineer-in-charge.
118Providing and fixing 110mm(one hundred fifty millimeter) dia. diameter on wall face unplasticised Rigid PVC rain water pipes in weep hole conforming to IS : 13592 indian standred:thirteen thousand fivehundred ninty two Type A, including jointing with seal ring conforming to IS : 5382,indian standard:five thousand three hundred eighty two leaving 10 mm gap for thermal expansion, Single socketed pipes completefor all floorsincluding entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail