Supply Installation And Commissioning Of Solar Panels For Running Of Motor Pumps At Mandhla Under Sub Dn Ramgarh With 3 Year O And M Of Whole Solar System Including Tubewell Etc. Under Distt. Div. Jaisalmer Supply Installation And Commissioning Of Solar Panels For Running Of Motor Pumps At Mandhla Under Sub Dn Ramgarh With 3 Year O And M Of Whole Solar System Including Tubewell Etc. Under Distt. Div. Jaisalmer , Supply, Installation, Testing And Commissioning Of Mnre Approved Off Grid Solar Panels For Running Of Motor Pumps With 25 Years Of Linear Generation Warranty, Work Includes Designing Of Solar Panel Area And Ms Frame And Foundation On Ground/Roof Of Pump House Or Cwr, Showing Arrangement Of Panel In Available Space, Installation Of Pv Module On Ms Frame As Per Approved Design And Drawings. Mounting Structure Shall Be Suitably Design To Withstand Wind Velocity Up To 150Km/Hr. The Work Shall Be Executed As Per Detailed Technical Specifications, Approved Drawing And Direction Of Engineer In Charge. Note: There Shall Be 5 Year Service Warranty For Solar Panel And Mounting Structure And Suitable Provision Shall Be Included In Tender Document. , At Mithatala , Providing, Installation, Testing And Commissioning Of Ac Submerssible Pump Sets With Inbuilt Or Individual Solar Pump Controllerwith Maximum Power Point Tracking (Mppt) For Optimally Use The Solar Panel And Maximize Water Discharge To Deliver Maximum Water During The Day. Solar Pumpshall Be Of Stainless Steel Construction And Performance Shall Be As Per Scope Of Work And Minimum Lift Of Water Shall Be As Per Defined In Scope . Pump Controller Shall Have Adequate Protection Against Dry Operation Of Motor Pump Set, And Against Hails And Storms. Full Protection Against Open Circuit, Accidental Short Circuit And Reverse Polarity Should Be Provided. A Good Reliable On/Off Switchbe Provided. The Cable Shall Be Isi Marked Three Core Pvc Flat Submersible Cableas Per Is 694:1990 Or Amended Up To Date ( Standard Insulation) And Conductor As Per Class 5 Of Is 8130:1980 Or Amended Up To Date. The Duty Condition Of Pump Set Shall Be As Per Scope Of Work And Entire Work Shall Be Executed As Per Technical Specification And Direction Of Engineer In Charge. Ac Submerssible Pump Sets +Individual Solar Pump Controllerwith Maximum Power Point Tracking (Mppt) , 5.0 Hp , Supply, Installation, Testing And Commissioning Of Remote Monitoring Unit On Off Grid Solar Controller For Remote On/Off, Parameter Setting, Monitoring And Troubleshooting Through Mobile Etc. Complete. Web Charges And Data Charges For 5 Year During Service Warranty Etc. Complete In All Respect As Per Technical Specification And As Per Direction Of Engineer. , Supply & Fixing M S Clamp Set Of 50X6 Mm Flat From Iron With Nuts And Bolts Etc For Holding The Riser Pipe Assembly Of Submersible Pump Set. , Providing & Laying Isi Marked Gi Pipe “A” Class As Per Is: 1239 For Casing Pipe For Submersible Cable External Work 40 Mm Dia Complete In All Respect. , Supply & Fixing Of Isi Marked Three Core Pvc Flat Submersible Cable As Per Is 694:1990 Or Amended Up To Date And Conductor As Per Class 5 Of Is 8130:1980 Including Making Connection Etc. 3 Core 6.0 Sq.Mm , Supply & Fixing Xlpe Insulated / P.V.C. Sheathed Cable Of 1.1 Kv Grade With Aluminium Conductor Armoured Of Is:7098-I/1554-1 Approved Make In Ground As Per Is:1255 Including Excavation Of 30Cmx75cm Size Trench, 25 Cm Thick Under Layer Of Sand, Second Class Bricks Covering, Refilling Earth, Compaction Of Earth, Making Necessary Connection, Testing Etc. As Required Of Size.25.0 Sq.Mm, 3.5 Core , Providing & Lowering In Tube Well Isi Marked Gi Pipe “B Class As Per Is:1239 Or Amended Up To Date Threaded And Double Flanged (Welded) On Both Ends And Two Number 25X3mm Ms Flat Welded On Both Ends Between Pipe & Flange, Rubber Washer & Nut Bolts Etc. Complete In All Respect. 65 Mm Dia , Providing, Installing, Testing And Commissioning Of Double Flanged Bulk Flow Meter With Removable Mechanism, Of Class B Conforming To Iso 4064/1 Or Amended Upto Date Of Approved Make Including Cost Of All Material And Labour As Per Specifications With Gi Box (Sheet 16 Swg) Suitable With Locking Arrangement Of Following Dia. 65 Mm Dia , Supplying & Installing 100 Mm Diameter Sealed Diaphragm Bourdon Type Pressure Gauge Of Range 0 To 10 Kg. Including All Jointing Material As Per Specification With Safety Cover. , Plate Earthing As Per Is:3043 With G.I. Earth Plate Of Size 600Mm X 600Mm X 6.0Mm By Embodying 3 To 4 Mtr. Below The Ground Level With 20 Mm Dia. G.I. B Class Watering Pipe Including All Accessories Like Nut, Bolts, Reducer ,Nipple, Wire Meshed Funnel, And C.C. Finished Chamber Covered With Hinged Type With Locking Arrangement C.I. Cover, C.I. Frame Of Size 300Mm X 300Mm Complete With Alternate Layers Of Salt And Coke/Charcoal, Testing Of Earth Resistance As Required. , Providing & Fixing Pump Safety Cage As Per Specifications Or As Directed By Engineer In Charge. , Supply & Fixing Tube Well Cover Of Ms Sheet 8Mm Thick At Top & 5Mm Thick 100Mm Wide Shroud Around The Edge So As To Form A Cap On The Top End Of Casing Pipe With Gi Nipple 45Cm Long & Two Gi Flanges At Both Ends In 80Mm Sizes Passing Through A Hole In The Centre Of Ms Sheet. A 25 Mm Socket With End Plug Shall Also Be Welded Over Top Plate. A Gi Nipple Having Outside Thread Of Size 1/2 (For Installation Pressure Gauge) Shall Be Provided & Welded With 80Mm Gi Nipple Near Top Plate Nipple Shall Be Provided With End Plug. 250 Mm Dia , Providing & Fixing Of Double Flanged, Ci Body, Isi Marked Nrv Of Approved Make Of Following Sizes. 65 Mm Dia , Providing And Fixing Of Flanged/ Plain Ended Ms Specials Made From Ms Sheet Strips Of Relevant Is Specification Of Approved Thickness By Welding, Lowering, Laying, Aligning, Fixing In Position At All Level/ Depths In Trenches Complete Including All Taxes, Material, Labour, Inside Lining, Outside Coating, Testing And Commissioning Along With Pipe Line As Per Technical Specifications And Direction Of Engineer-Incharge.Ms Pipe Specials Upto 600Mm Dia (With Minimum 5Mm Thickness Sheet) , Providing And Fixing Steel, Gate, Grating And Grills Made Of Angles, Tees, Square Bars, Flats Or Black Pipe With Hold Fast And Fitting Complete As Per Design And Drawing Including Cutting Welding And Fabrication With Priming Coat Of Red Oxide And Two Coat Of Enamel Paints. , Providing And Fixing Of Isi Marked Pvc Storage Tank Of Following Capacity As Per Is: 12701-1989 (Of Approved Make) With Cover, 25 Mm Dia. 1 Mtr Long Gi Overflow Pipe, 25 Cm Long 25 Mm Dia Washout Gi Pipe With Plug & Socket, Including P&F 32 Mm Dia Ball Cock (Float Valve) Is 1703 Marked With Rod And Pvc Ball Complete With Brass Weight 1000 Gm, Including P&F 15Mm Dia Ci Quarter Turn Heavy Duty Bib Cocks Four Nos Of Superior Quality And Approved Make, Including Interconnections Complete Job. 2000 Litres Capacity , Fabrication & Fixing M.S. Stand Of Specified Class Of Angle Iron L-Shaped Of 50 Mm Size With Four Legs Grouted By 300*300*300 Mm Cc Block M-15 In The Ground And All Legs Tied Up With Each Other Through Same Size Of Angle Iron Along With Cross Bars To Support The Bottom Of 1000 Ltr./ 2000 Ltr. Pvc Tank Complete In All Respect. , Maintenance Of Tubewells Which Includes Round The Clock Monitoring Oftubewells Of All Sizes, Completerepairs /Rewinding Ofsubmersible Pumpsets Including Cost Ofmaterial Components Required To Repair Pumpsets, Starters, Meters Etc. Of Electric Panel Of Tube Wells, Lowering And Unlowering Of Pumpsets Complete In All Respect, Maintenance Of Log-Booksandhistroy Sheetas Directed By Engineer-In-Charge For Tubewell Per Month.(Forrural Scheme Where Three Phase Electric Supply Is Up To 8 Hrs) 7.3.10.5 Hp To 5.0 Hp
