Assam Agricultural University has published Construction Of Boundary Wall At Lakhimpur College Of Veterinary Science,Girls Hostel, Assam Agricultural University, Joyhing, North Lakhimpur Boundary Wall Works North Lakhimpur. Submission Date for this Tender is 12-08-2022. Wall construction Tenders in lakhimpur Assam. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Building Work |
2 | Earthwork in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches of walls or drains (not exceeding 1.5m in width or 10sqm on plan)…........All kinds of soil |
3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1cement:4 coarse sand) |
4 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1cement :6 coarse sand: 12 graded stone aggregate 20mm nominal size) upto plinth level with:Cement mortar 1:6 ( 1cement: 6 coarse sand) |
5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level 1:3:6 (1cement:3coarse sand (zone-III):6 graded stone aggregate 40mm nominal size) |
6 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level:1:1.5:3 (1cement:1.5coarse sand (zone-III):3 graded stone aggregate 20mm nominal size) |
7 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:1:1.5:3 (1 cement:1.5 coarse sand (zone-III): 3 graded stone aggregate 20mm nominal size) |
8 | Reinforced cementconcrete work in beams, suspended floors, roofs having slope up to 15 deg landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair case cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1cement:1.5 coarse sand (zone-III):3 graded stone aggregate 20mm nominal size) |
9 | Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc for mass concrete |
10 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
11 | Columns, Pillars, Piers, Abutments, Posts and Struts |
12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more |
13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more |
14 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super structure above plinth level up to floor V level Cement mortar 1:4 (1cement:4 coarse sand) |
15 | 15mm cement plaster on rough side of single or half brick wall mix:1:4 (1cement:4coarse sand) |
16 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. Water thinnable cement primer |
17 | Providing and applying plaster of paris putty 2mm thickness over plastered surface to prepare the surface even and smooth complete |
18 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives New work (Two or more coats applied @1.43 litre/10sqm. Over and including priming coat of exterior primer applied @0.90 litre/10sqm |
19 | Providing and fixing 1mm thick M.S. sheet sliding shutters, with frame and diagonal braces of 40X40X6mm angle iron, 3mm M.S. gusset plates at the junctions and corners, 25mm dia pulley, 40X40X6 mm angle and T-iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail