Agra Development Authority has published Tender For Expansion Joint Water Proofing Work.. Submission Date for this Tender is 13-07-2022. Water Proofing Work Tenders in agra Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Removing and cleaning of the grass/Plants remove the surface area. Minimum width will be 600 mm (Lowest Quotation rates) |
2 | Surface cleaning to remove soil or any loose material & rectification of voids. (Lowest Quotation rates) |
3 | Surface Preparation: - All surfaces shall be free from oil, grease, friable matter and general curing compounds (wax- based curing membranes shall not be used in areas to be over coated). Surface grind by grinder. Concrete surfaces shall be cleaned using high pressure water jetting, grinding or other methods approved by the Engineer. (Lowest Quotation rates) |
4 | Supplying of High strength, Non shrink Mortar Mapegrout T40 for Treating Honeycomb & Plastering in order to get required Reinforcement cover & groove filling. Providing and apply of waterproofing coating |
5 | Surfaces on which Mapeband TPE 2mm thick is to be applied must be free from oil, grease and paint and must be free from dust and areas which are either uneven or loose. Paintwork or toppings must be removed by sandblasting or with a sanding disc. This operation is indispensable if the surfaces have been treated with polyester, epoxy or polyurethane resin or if it is made from glassy material. If Mapeband TPE is to be applied on metallic surfaces, remove all traces of rust, paint, grease, etc. by sandblasting down to bare metal. When Mapeband TPE is 200mm to 300 mm wide applied, the surface must be perfectly dry. To obtain a joint with a clean, well-defined profile, apply masking tape around the outside surface of the joint, in order to obtain an area which is 1 cm wider than the width of the TPE tape to be spread with adhesive (fig. 1). After laying, bonding and finishing off with a trowel, remove the masking tape. (Lowest Quotation rates) |
6 | Providing and fixing sheet covering over expansion joints with iron screws as per design. Providing and fixing in position Stainless steel plate-0.6 mm thick as per design for expansion joints.:300 mm wide. (Lowest Quotation rates) |
7 | Re-filling the Soil (Lowest Quotation rates) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail