}

Repair / Replacement Of Lt Panel Board, Switch Gears, Security Lights And Other Allied Works At Lamayaru, Khaltsi, Hanuthang, Achninathang, Batalik And Biamah In The Aor Of Age Br-Ii Khaltsi Under Ge Khumbathang, Khumbathang-Jammu And Kashmir

Military Engineer Services-MES has published Repair / Replacement Of Lt Panel Board, Switch Gears, Security Lights And Other Allied Works At Lamayaru, Khaltsi, Hanuthang, Achninathang, Batalik And Biamah In The Aor Of Age Br-Ii Khaltsi Under Ge Khumbathang. Submission Date for this Tender is 29-07-2022. Gear Product Tenders in Khumbathang Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

32922486
Corrigendum : Repair / Replacement Of Lt Panel Board, Switch Gears, Security Lights And Other Allied Works At Lamayaru, Khaltsi, Hanuthang, Achninathang, Batalik And Biamah In The Aor Of Age Br-Ii Khaltsi Under Ge Khumbathang
Open Tender
Indian
Jammu And Kashmir
Khumbathang
29-07-2022

Tender Details

Repair / Replacement Of Lt Panel Board, Switch Gears, Security Lights And Other Allied Works At Lamayaru, Khaltsi, Hanuthang, Achninathang, Batalik And Biamah In The Aor Of Age Br-Ii Khaltsi Under Ge Khumbathang

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 22-Jul-2022 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 29-07-2022

Key Value

Document Fees
INR 500 /-
EMD
INR 38000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: REPAIR/REPLACEMENT OF LT PANEL BOARD, SWITCH GEARS, SECURITY LIGHTS AND OTHER ALLIED WORKS AT LAMAYARU, KHALTSI, HANUTHANG, ACHNINATHANG, BATALIK AND BIAMAH IN THE AOR OF AGE BR-II KHALTSI UNDER GE KHUMBATHANG
Sl. No. Item Description
1Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for laying of cable/pipe & getting out of any type soilcomplete all as specified and directed.
2Removal of excavated soil to distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed
3Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified.
4Sand cushioning with fine sand to under ground cables in trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable as specified in clause 19.75 of SSR Part-I. (Note:-Punned thickness shall be measured and paid)
5Supply and laying un reinforced precast concrete cable cover class LV, type I, flat, size 250 mm x 150 mm x 40 mmcomplete all as specified.
6Supply, testing, Laying & connecting in replacement XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 Sqmm 4 core complete all as specified.
7All as per srl item No. 6 here-in-before but cable size 25 Sqmm 4 core.
8All as per srl item No. 6 here-in-before but cable size 35 Sqmm 3.5 core.
9All as per srl item No. 6 here-in-before but cable size 50 Sqmm 3.5 core.
10All as per srl item No. 6 here-in-before but cable size 70 Sqmm 3.5 core.
11All as per srl item No. 6 here-in-before but cable size 95 Sqmm 3.5 core.
12All as per srl item No. 6 here-in-before but cable size 120 Sqmm 3.5 core.
13All as per srl item No. 6 here-in-before but cable size 185 Sqmm 3.5 core.
14M&L for GI pipe light grade 50mm dia with all fittings to laid in tranches/wall/pole or under road/PCC path for cable protection complete all as specified and as directed.
15S&F in replacement MCCB 63 Amps,4 pole, 415 volts, 16 KA rupture capacity with release adjustable thermal & fixed magnetic setting complete all as specified and as directed.
16All as per srl item No. 15 here-in-before but capacity MCCB 100 Amp, 4 pole, 25 KA.
17All as per srl item No. 15 here-in-before but capacity MCCB 160 Amp, 4 pole, 36 KA.
18All as per srl item No. 15 here-in-before but capacity MCCB 200 Amp, 4 pole, 36 KA.
19All as per srl item No. 15 here-in-before but capacity MCCB 400 Amp, 4 pole, 36 KA.
20S&Fin repair Changeover switch on load of capacity 100 Amps, 415 volt, 4 pole, with metal enclosure box, including replacement of incoming and outgoing cable connectiones with aluminium conductor cable, lugs, nuts ,bolts etc.
21S&Fin repair Changeover switch off load of capacity 200 Amps, 415 volt, 4 pole, with metal enclosure box, including replacement of incoming and outgoing cable connectiones with aluminium conductor cable, lugs, nuts ,bolts etc.
22All as per srl item No. 21 here-in-before but capacity Changeover switch off load of capacity 400 Amps, 415 volt, 4 pole.
23M&L for scrapping of old paint from the steel tubular pole upto 9.0 mtr height without removing accessories and preparation of surfaceand applying one coat of synthetic eanmal paint an alternative white and black straps of 30 CM upto 1.5 mtr height ,including painting of remaining pole size and iron parts i.e. u clamps, channels etc. above 1.5 mtr height by applying one coat of aluminium paint all as specified and as directed.
24M&L for Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level and connected to galvanised iron strip 32x6mm (upto and including 7.5meter), surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt,connected to galvanized earth lead wire 4mm dia by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3, strip protected by dia 40 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI light grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggregate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result complete including taking out of existing earthing all as specified.
25S&F in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with protection IP66 ingress protection and impact resistance of IK08. 4kV inbuilt surge protection with Top opening driver cover for easy maintenance.
26S&F in replacement LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with protection IP66 ingress protection and impact resistance of IK08. 4kV inbuilt and 10kV external surge protection with Top opening driver cover for easy maintenance.
27All as per srl item No. 26 here-in-before but capacity LED street light 70 watt.
28All as per srl item No. 26 here-in-before but capacity LED street light 90 watt.
29Supply and installation erection commissioing and testing in replacement of LT panel cubical out door type weather/dust proof, factory made out of 3.15mm thick CRCA sheet powder coated with front and back side openable with suitable cable alloy and front side shutter with locking arrangement panel base of angle iron 50x50x6mm upto 45 cm height for 433 volts, 3 phase, 4 wire system includign four pole aluminium bus bar 400 amps capacity including control wiring with suitable size of PVC insulated standed copper conductor and incoming/outgoing connection with aluminium bus bar complete as per manufacture design complete mounted or fixed on PCC 1:3:6 (using 20mm graded crushed stone aggregate) foundation and inculding earth work above 0.45 mtr on floor and cable connection with suitable size of aluminium lugs and glands complete comprising the following:-
30(a)Changeover switch 100 Amps, 4 pole - 01 Nos (b) MCCB 4 pole 415 volts 100 Amps, 36 KA thermally adjustable & fixed magnetic release - 01 Nos-incoming (c)MCCB 4 pole 415 volts 63 Amps, 25 KA thermally adjustable & fixed magnetic release - 02 Nos-outgoing (d)MCB SPN 32 Amp, 10 KA- 02 Nos-outgoing (e) Copper bus bar with PVC sleev suitable for 250 Amp for netural - 02 Nos (f) Ammeter 0-100 Amps, size 4"x4" digitalalong with suitable size CT"s-01 Nos (g) Volt meter 0-500 volts size 4"x4" digital AC with selector switch - 01 No (h) LED indicator lamp(RYB) - 01 Set
31Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 28,559.00 and any other reduction if any from quoted amount.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail