}

Supply Installation Testing Commissioning Of Submersible Pump Sets With Allied Enm Accessories For Commissioning Of 2 Nos. Tube Wells In Maidangarhi And Kharak Rewada In Chhatarpur Constituency Ac-46., Delhi-Delhi

Delhi Jal Board-DJB has published Supply Installation Testing Commissioning Of Submersible Pump Sets With Allied Enm Accessories For Commissioning Of 2 Nos. Tube Wells In Maidangarhi And Kharak Rewada In Chhatarpur Constituency Ac-46.. Submission Date for this Tender is 08-07-2022. Submersible Pump Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

32920696
Supply Installation Testing Commissioning Of Submersible Pump Sets With Allied Enm Accessories For Commissioning Of 2 Nos. Tube Wells In Maidangarhi And Kharak Rewada In Chhatarpur Constituency Ac-46.
Open Tender
Indian
Delhi
Delhi
08-07-2022

Tender Details

Supply Installation Testing Commissioning Of Submersible Pump Sets With Allied Enm Accessories For Commissioning Of 2 Nos. Tube Wells In Maidangarhi And Kharak Rewada In Chhatarpur Constituency Ac-46.

Key Value

Document Fees
INR 500 /-
EMD
INR 17000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work :- SITC of Submersible Pump Sets with allied E&M Accessories for Commissioning of 2 Nos. Tube Wells in Maidangarhi and Kharak Rewada in Chhatarpur Constituency AC-46.
Sl. No. Item Description
1S/o Submersible pump set of 7.5 HP/ 15 stage, head 89-124-133, Discharge 200-125-75, Make: BS. SOR Code :- 2.4.6
2P/o Hut type electrical feeder pillar of size 1370mm x 760mm x 460mm, fabricated with 50mm x 50mm x6mm angle Iron and 16 SWG M.S. sheet with horizontal and vertical intermediate member of suitable size. The feeder pillar panel shall be mounted on the suitable base frame made out of 50x50x6mm angle iron with arrangement for mounting electrical energy meter, Switch-gears i/c painting having following items.(1) Main Switch 63 Amp TPN, 415 Volt Make: Havells/Bentex/capital (2)FASD Starter of 3 Phase oil immersed type suitable for 10 HP rating pump set. Make – Capital/Bentex/ Adavance (3) Ampere meter 96mmx96mm square shape of 0-30 Amp range. Make: A.E/Bentex/Capital (4) Voltmeter of 96mm x 96 mm square shape of 0-500 Volt range. Make: A.E/Bentex/Capital (5) MPP type Shunt capacitor (Heavy duty) 5 kVAR. Make: Epcos/L&T/Havells (6) LED Indicating lamps with fitting (a set of 3 lamps) Make: - Vaishnao/L&T/Havells (7) ELCB, 63 Amp, 4 Pole, sensitivity 300 mA, confirm to IEC 61008/IS: 12640-I. Make: L&T/Siemens/ABB/Havells/DJB approved make. (8) Selector switch for Voltmeter. Make - Vaishno/L&T (9)Motor Protection Assembly having Earth Leakage protection Phase sequence corrector Single phasing protection Over load protection High voltage-low voltage protection. Time delay power on Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa up to 10 HP. Make: C&S/L&T/Schiender/ABB/Gain guard/skope/S-Guard (9) Complete wiring of feeder pillar panel & installation of electrical accessories with all required switch-gears as per required. SOR Code :- 10.2.1
3Providing of Starter Oil/Transformer Oil Make:- Savita/Power/Bentex/Capital
4P/o PVC insulated & PVC sheathed flat cable with plain copper conductor having 3 cores 4 sq. mm size for submersible motor. (Each roll of 100 mtrs.) Make:-Gloster/ Grandlay/ ICC/ CCI/ ICL/ Havells
5Providing of double flange G.I. column pipe 50 mm dia., medium class, each of 3 mtrs Long duly threaded on both ends, welded & fitted with G.I. flange on both ends welded with three nos. support strip at each end between flange and pipe,withtwo slots for sub cable in each flange. Make of pipe: TATA/Jindal.
6P/o M.S. clamp of 600 mm length duly fabricated from 12.5mm thick 75mm wide M.S. plate for holding the pipe of 50mm dia.
7Providing of tail piece of the medium class G.I. pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of G.I. pipe 50 mm dia. Make of pipe: TATA/Jindal
8Providing G.I. 90 x 50 mm dia. bend having flange at both ends (Heavy duty).
9Providing of MS full threaded Nut bolts off sizes as per site requirement.
10Providing of bore cover approx size 1’x1’ made out from 6mm thick M.S. sheet in 2 halves & a circular hole in centre 2-1/2” dia with locking arrangement by Nuts & bolt.
11Providing of Rubber packing for 50 mm dia. Flange
12Installation of t/well by lowering of sub p/set with all allied above items.This includes installation and grouting of panel board with all electrical wiring & cabling at site.All tools & tackles i/c tripod chain pulley blocks etc. shall be arranged by the firm.This includes testing & commissioning of t/well on load at site i/c cartage, loading & unloading of material.It also includes trial run of 100 hrs operation successfully by the firm.All required civil work included in the scope of work.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail