}

Supply Installation Testing Commissioning Of Submersible Pump Sets With All Enm Equipments For Newly Re-Bored Tube Wells At D-Block Okhla Phase-Ii Under Tughlakabad Constituency Ac-52., Delhi-Delhi

Delhi Jal Board-DJB has published Supply Installation Testing Commissioning Of Submersible Pump Sets With All Enm Equipments For Newly Re-Bored Tube Wells At D-Block Okhla Phase-Ii Under Tughlakabad Constituency Ac-52.. Submission Date for this Tender is 08-07-2022. Submersible Pump Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

32920688
Supply Installation Testing Commissioning Of Submersible Pump Sets With All Enm Equipments For Newly Re-Bored Tube Wells At D-Block Okhla Phase-Ii Under Tughlakabad Constituency Ac-52.
Open Tender
Indian
Delhi
Delhi
08-07-2022

Tender Details

Supply Installation Testing Commissioning Of Submersible Pump Sets With All Enm Equipments For Newly Re-Bored Tube Wells At D-Block Okhla Phase-Ii Under Tughlakabad Constituency Ac-52.

Key Value

Document Fees
INR 500 /-
EMD
INR 7400.0 /-
Tender Value
Refer document

BOQ Items

Name of Work :- SITC of Submersible Pump Sets with all E&M Equipments for Newly Re-Bored Tube Wells at D-Block Okhla Phase-II under Tughlakabad Constituency AC-52.
Sl. No. Item Description
1S/o. Sub. P/Set for deep bore wells (high head) of 7.5 HP with dynamically balanced motor, vibration free total enclosed motor fitted squirrel cage induction motor, water lubricated thrust bearing, fitted with S.S. impeller mounted on stainless steel shaft of following parameters having 2900 RPM, suitable to operate on 3 Phase 415 Volt 50 Hz, A.C. supply, Head in meters approx. – 144-82, Discharge in LPM – 95-170, Method of starting – star – delta, Delivery size –50 mm, Make: SU/BS/DJB approved, DSR 2.4.6
2S/o Hut type electrical feeder pillar/metal boardof welded construction ofsize 1370mm x 760mm x 460mm fabricated with suitable sizeMS angle iron with 16 SWGM.S. sheet, havinghorizontal and vertical intermediate chamber of suitable size on suitable size insulating board to make the Panel Robust, having double doorand S.S hinges along with double locking arrangement, having fabricatedMS angle ironframe for mounting of switch gears such as RCCB, MCCB, RYB indicating lights, selector switch, ampere meter, volt meter and electrical energy meter etc i/c painting having following items ;MCCB 63 Amp, 4 Pole, Breaking capacity at 415 V: 25 kA, adjustable thermal setting (70- 100%) and fixed magnetic settings. Confirms to IEC: 60947-II/IS: 13947-II, RCCB 63 Amp, 4 Pole with earth fault indicator and positive contact indication protecting a circuit automatically in the event of earth leakage, Sensitivity: 300 mA, Confirms to IEC: 61008-I/IS: 12640-I, Fully automatic star delta starter of 10HP, 3Phase oil immersed type,Ampere meter 96mmx96mm square shape of 0-30 Amp range,Voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch, LED Indicating lamps with fitting (a set of 3 lamps), Shunt capacitor of 10 KVAR MPP type with three phase isolator withsuitable banking ,Panel Should have Motor Protection Assembly having Earth Leakage protection, Phase sequence corrector, Single phasing protection, Over load protection, High voltage-low voltage protection. Time delay power on Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa) up to 10 H.P., Complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc as required.The panel board shall be mounted on the base frame of 2 feet height made of 50x50x6mm angle iron frame. DSR 10.2.1, Make:-The entire insert used in Panel must be of DJB approved makes wherever applicable
3S/o PVC insulated & PVC sheathed flat cable with plain copper conductor having 3 cores 4 sq. mm size for submersible motor. (Each roll of 100 mtrs) Make:-Havells/Fort Gloster/Grandlay/ICL/CCI/ICC/Universal
4S/o M.S. clamp of 600 mm length duly fabricated from 12.5 mm thick 75 mm wide M.S. plate for holding the pipe of 50 mm dia.
5S/o of double flange G.I. column pipe 50 mm dia., medium class, each of 3mtrs Long duly threaded on both ends, welded & fitted with G.I. flange on both ends welded with three nos. support strip at each end between flange and pipe, with two slots for sub cable in each flange. Make of pipe: TATA/Jindal.
6S/o tail piece of the medium class G.I. pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of G.I. pipe 50 mm dia. Make of pipe: TATA/Jindal
7S/o G.I.900 x 50 mm dia. bend having flange at both ends (Heavy duty).
8Supply of MS full threaded Nut bolts off sizes as per site requirement
9Supply of Rubber packing for 50mm dia. Flange( 3 mm thick)
10Supply of bore cover approx size 1’x1’ made out from 6mm thick M.S. sheet in 2 halves & a circular hole in centre 2-1/2” dia with locking arrangement by Nuts & bolt
11Supply CI D/F non return valve of size 50 mm dia.,as per IS 5312(part 1&2)PN 1.0 CI Body, Door/Bronze to Rubber rings/SS410 Hinge Pin Construction Make: IVC/Kirloskar DSR 4.9.2
12Installation of t/well by lowering of sub p/set with all allied above items.This includes installation and grouting of panel board with all electrical wiring & cabling at site.All tools & tackles i/c tripod chain pulley blocks etc. shall be arranged by the firm.This includes testing & commissioning of t/well on load at site i/c cartage, loading & unloading of material.It also includes trial run of 100 hrs operation successfully by the firm.All required civil work included in the scope of work.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail