Public Works Department-PWD has published Stage Contract For Routine Maintenance And Repairs Including Tile Works Sanitary Items Overhauling Of Circulation Motors Over Hauling Of Tube Wells Scientific Cleaning And Sterilization Of Water Storage Tanks Two Stages Etc. At High Court Comple. Submission Date for this Tender is 08-07-2022. Tanks and Cylinders Tenders in Budgam Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm. |
2 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown |
3 | Providing and fixing Ist qualityceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ), of approved make , inallcolours , shades except burgundy , bottle green , blackofany size as approved by Engineer- in-Charge , in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
4 | Supply ,installation , testing and commissioningof 1.5 HP water lifiting motor including all necessary fittings labour charges / dismentalling of old one with all carriages comlete. |
5 | Scientific cleaning and sterlization of water storage tanks the job involves six stages of cleaning ie; cleaning and sterlization processconsisting of mechanical de-watering high pressure ,cleaning sludge removal ,vaccum cleaning ,anti bacterial spray and finally killing of suspended and fluting bacteria by ultra voilet raidations as directed by engineer in charge. |
6 | Providing and fixing of water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, 10 liter low level white PVC flushing cistern with manual controlled device (handle lever) confirming to I.S. 7231 Parry ware / Hind ware / Cera with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White vitreous china long pan pattern W, C. pan of size 580mm with integral type foot rests. |
7 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white PVC flushing cistern with manual controlled device (handle lever) confirming to I.S. 7231 Parry ware / Hind ware / Ceria as approved with all fittings and fixtures complete including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. |
8 | Providing and fixing wash basin (Cera/ Hindware or equivalent) with CI/MS/ brackets including painting of fittings and brackets, cutting and making good walls wherever required white vitreous china wash basin size 630x450mm with 32mm dia. C.P. brass union & flexible waste pipe |
9 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
10 | Providing and fixing of white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm (Hindware/Cera/Jaguar/equivalent) |
11 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, Cera, Parry ware with fittings and fixtures complete. 10 liters capacity-white |
12 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan Cera, Parry ware complete. |
13 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm size respectively. |
14 | Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. 610x510mm bowl depth 200mm. (standard make approved by EIC). |
15 | Providing and fixing of white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 40x410x265mm respectively with automatic flushing cistern with standard flush pipe and C.P brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required One urinal basin with 5 liter white PVC automatic flushing cistern parry ware/ Hind ware/Cera. |
16 | Providing and fixing 600x450mm beveled edge mirror of specified brand mounted on 6mm thick plywood/hardboard including cost of wooden/PVC plugs and CP brass screws. |
17 | Providing and fixing beveled edge mirror of specified brand mounted on 6mm thick plywood/ hardboard including cost of wooden/PVC plugs and CP brass screws. |
18 | Circular shape 450mm dia. |
19 | Rectangular shape 453x357mm. |
20 | Oval shape 450x350mm |
21 | Providing and fixing of C.P grating 100mm size. ISI marked complete. |
22 | Providing and fixing of G.I pipes (class B pipes Prakash Surya/ Jindal or equivalent) complete with G.I fittings and clamps including cutting and making good the walls etc. internal work (Exposed on Walls) |
23 | 15mm dia. Nominal bore |
24 | 20mm dia. Nominal bore |
25 | 25mm dia. Nominal bore |
26 | 32mm dia. Nominal bore |
27 | 40mm dia. Nominal bore |
28 | 50mm dia. Nominal bore |
29 | Providing and fixing of G.I pipes (class B pipes Prakash Surya or Equivalent) complete with G.I fittings including trenching and refilling etc. (external work) |
30 | 15mm dia. Nominal bore |
31 | 20mm dia. Nominal bore |
32 | 25mm dia. Nominal bore |
33 | 32mm dia. Nominal bore |
34 | 40mm dia. Nominal bore |
35 | 50mm dia. Nominal bore |
36 | 65mm dia. Nominal bore |
37 | 80mm dia. Nominal bore |
38 | 100mm dia. Nominal bore |
39 | Providing & Fixing GI pipes (B-Class) complete with GI fittings and clamps including making good the walls etc. concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall. (PrakashSurya/Jindal/Equivalent) |
40 | 15mm dia. Nominal bore |
41 | 20mm dia. Nominal bore |
42 | Providing and fixing of following G.I. fittings. 15mm nominal bore. Link/NIKE/DPR-M |
43 | Elbow |
44 | Tee |
45 | Union |
46 | pvc plug/ G.I Plug |
47 | Nipple |
48 | 50mm long. |
49 | 75mm long |
50 | 100mm long |
51 | 150mm long |
52 | Socket |
53 | 15mm |
54 | 20mm |
55 | 25mm |
56 | Reducer |
57 | 15mm-20mm |
58 | 20mm-25mm |
59 | 20mm-32mm |
60 | 25mm-32mm |
61 | Providing and fixing of following G.I. fittings. 20 mm nominal bore. Link/ NIKE/ DPR-M |
62 | Elbow |
63 | Tee |
64 | Union |
65 | pvc plug/ G.I Plug |
66 | Nipple |
67 | 50mm long. |
68 | 75mm long |
69 | 100mm long |
70 | 150mm long |
71 | Providing and fixing of PVC connection with C.P. brass unions |
72 | 300mm long. |
73 | 450mm long |
74 | 600mm long |
75 | Providing and fixing ball valve (brass) of approved quality complete (Leader/ Saint/ equivalent Make) |
76 | 15mm dia. |
77 | 20mm dia. |
78 | 25mm dia. |
79 | 40mm dia. |
80 | Providing and fixing gate valve (brass) of approved quality complete (Leader/ Saint Make/ equivalent Make). |
81 | 15mm dia. |
82 | 20mm dia. |
83 | 25mm dia. |
84 | 40mm dia. |
85 | Providing and fixing of Ball cock of approved quality and make with plastic float. (PVC type) |
86 | 15 mm |
87 | 20 mm |
88 | Providing and fixing of Ball cock of approved quality and make without plastic float. |
89 | 15 mm |
90 | 20 mm |
91 | Providing and placing on terrace (at all floor levels) polythene water storage tank ISI:12701 mashed indicating the BIS license No. with cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but including all required tankey nipples and excluding the base support for tank (Syntax/Comfort or equivalent having valid ISI license) complete |
92 | Construction of platform for W.C. with brick masonry in cement mortar 1:6 mix. Including filling of sand and providing of 15mm cement plaster in 1:4 mix. |
93 | Providing and fixing of C.P. Cups for C.P. fittings. |
94 | Providing and fixing of C.I. manhole cover heavy duty of following sizes. |
95 | 12"x12" |
96 | 18"x18" |
97 | 24"X24" |
98 | Supply ,installation,testing and commissioning of water heater (geysers) of Venus/Racold/Jaquar make copper core including cost of dash fasteners with nuts and washers |
99 | 60 Litre |
100 | 50 Litre |
101 | 40 Litre |
102 | 35 Litre |
103 | 25 Litre |
104 | Providing and fixing of Chromium plated brass tube for wash basins and geysers etc. |
105 | 45 cm in length |
106 | 60 cm in length |
107 | Providing and fixing Geyser elements (as per Geyser type) |
108 | Providing and fixing Geyser thermostat of approved quality complete. |
109 | Providing and fixing Drain plug with washer. |
110 | Providing and fixing Safety valve for geysers. |
111 | Providing and fixing water washers for geysers. |
112 | Providing and fixing of auto thermo cut for geyser. |
113 | Providing and fixing of Baja brass/wet type element for water geyser as per Geyser Type |
114 | Providing and fixing of matte cover for geyser. |
115 | Providing and fixing of pressure water ball. |
116 | Providing and fixing of C.P. Swan cock 3 way of approved quality. |
117 | Providing and fixing C.P. brass bib cock of approved quality (Jaguar- Continental/Hindware-contessa plus/equivalent) 15mm nominal bore short body. |
118 | Providing and fixing of 15mm size chromium plated cast brass pillar cock of approved quality. (Jaguar- continental/Marc/Hindware-contessa plus/equivalent) |
119 | Providing and fixing of 15mm size chromium plated cast brass angle valve of approved quality. (Jaguar- Continental/Hindware-contessa plus/equivalent) with wall flange |
120 | Providing and fixing of 15mm size chromium plated cast brass wash basin mixer of approved quality. (Jaguar- Continental/Hindware-contessa plus/equivalent) |
121 | Providing and fixing of 15mm size chromium plated cast brass sink mixer of approved quality. (Jaguar- Continental/Hindware-contessa plus/equivalent) with flange. |
122 | Providing and fixing of 15mm size chromium plated cast brass wall mixer Non telephonic with lead of approved quality. (Jaguar-Continental/Hindware- contessa plus/equivalent) with flange |
123 | Towel ring 20mm dia. (Jaguar-Continental/Hindware-contessa plus/equivalent) with flange |
124 | Towel rod (Jaguar- Continental/Hindware-contessa plus/equivalent) |
125 | Stainless Steel Soap Dish holder. |
126 | Providing and fixing 600mmx120mmx5mmglass shelf with edges round of supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc. complete. |
127 | C.P./PVC Long bends of required size of approved quality. |
128 | C.P. Waste for wash basin of approved quality |
129 | Providing and fixing of pvc manhole cover of approved make of following sizes. (Heavy type) |
130 | 12"x12" |
131 | 18"x18" |
132 | 24"X24" |
133 | Construction of soakage pit by way of earth work in excavation including providing and fixing of pre-cast cement concrete rings 0.90 mtr dia. of specified thickness and 200-250 mm wide including all carriages complete. Including disposal of excavated earth within the campus as directed by EIC. |
134 | Providing and fixing of pre-cast cement concrete lid for soakage pit of specified size and thickness. |
135 | Construct brick masonry man hole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 Coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete (1:4:8) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size finished with a floating coat of neat cement complete. |
136 | Inside size 90 x 90 x 90cm deep including RCC/C.I. manhole cover medium duty with frame of size 60x60mm size. With F.P.S. bricks with class designation 75 and with crushed stone aggregate complete in all respects. |
137 | Inside size 60 x 60 x 60 cm deep including RCC/C.I. manhole cover medium duty with frame of size 60x60mm size. With F.P.S. bricks with class designation 75 and with crushed stone aggregate complete in all respects. |
138 | Inside size 45 x 45 x 45cm deep including RCC/C.I. manhole cover medium duty with frame of size 45x45mm size. With F.P.S. bricks with class designation 75 and with crushed stone aggregate complete in all respects. |
139 | Providing and fixing of PVC (Prince/Finolex/Jindal make) pipe (Type "B") in proper gradient in excavated trenches including jointing and refilling the excavated material complete including cost of excavation. |
140 | 150mm dia. Pipe |
141 | 100mm dia. Pipe |
142 | 75mm dia. Pipe |
143 | 50mm dia. Pipe |
144 | Providing and fixing of the following PVC fittings. (Prince/Finolex/Jindal make) |
145 | Plain bend.100mm |
146 | Plain bend.75mm |
147 | Collar 100 mm |
148 | Collar 75 mm |
149 | Door Bend 100 mm |
150 | Door Bend 75 mm |
151 | Door Tee 100 mm |
152 | Door Tee 75 mm |
153 | Plain Tee 100 mm |
154 | Plain Tee 75 mm |
155 | Door Junction Four Way 100 mm |
156 | Door Junction Four Way 75 mm |
157 | Plain Junction Four Way 100 mm |
158 | Plain Junction Four Way 75 mm |
159 | Floor Trap 100 mm |
160 | Floor Trap 75 mm |
161 | Providing and fixing of Health Faucet/jet spray with plastic flexible pipe 8 mm dia, 1.5 m long, wall hooked complete as required, including necessary Accessories, installation charges and complete in full respect as per the directions of Engineer- in-charge. |
162 | Providing and fixing Brass bib cock of approved quality 15mm nominal bore. |
163 | Providing and fixing spindle 15mm dia. All types like washer type/disc type etc. |
164 | Providing and fixing Mixer leg set (Jaguar/Mark/Cera) |
165 | Providing & Replacing of Siphon to flushing cistern Cera/Hindware make |
166 | Providing & Replacing of washer to Siphon of flushing cistern |
167 | Providing & Replacing of handle to Siphon of flushing cistern |
168 | Providing & Replacing of ball cock of flushing cistern without float |
169 | Providing & Replacing of ball cock of flushing cistern with float |
170 | Providing & fixing of polycarbonate corrugated sheets of approved make. |
171 | Providing & fixing of pvc panelling 6mm thick of approved make including all related accessories like corner/top flashing, etc complete including grounds, including fixing, screwing complete |
172 | Providing & fixing wallpaper of approved pattern & quality to wall surface including chemical & adhesive as per directions of EIC |
173 | Touchwood polishing, two or more coats on wood work including pressing of nails, scrapping with emery paper, a coat of wood filler & fevicol washing complete as per directions of EIC on new wood work. |
174 | Touchwood polishing, two or more coats on wood work including a coat of wood filler & fevicol washing complete as per directions of EIC. also including removing of old existing finishing by proper scrapping with sanding/emery paper as per directions of EIC. |
175 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer incharge. Internal work Concealed fixing the pipeetc. (RAK/ Astral/ Finolex or equivalent |
176 | Internal work Concealed fixing the pipe ......etc. PN-16 pipe, 25mm OD(SDR- 7.4) |
177 | Internal work Concealed fixing the pipe ......etc. PN-16 pipe, 32mm OD(SDR- 7.4) |
178 | Internal work exposed on wall with clamps ......etc. PN-16 pipe, 25mm OD(SDR-7.4) |
179 | Internal work exposed on wall with clamps ......etc. PN-16 pipe, 32mm OD(SDR-7.4) |
180 | Internal work exposed on wall with clamps ......etc. PN-16 pipe, 40mm OD(SDR-7.4) |
181 | Internal work exposed on wall with clamps ......etc. PN-10 pipe, 50mm OD(SDR-7.4) |
182 | External work including trenching, refilling etc. PN-16 pipe, 25mm OD(SDR-7.4) |
183 | External work including trenching, refilling etc. PN-16 pipe, 32mm OD(SDR-7.4) |
184 | External work including trenching, refilling etc. PN-16 pipe, 40mm OD(SDR-7.4) |
185 | External work including trenching, refilling etc. PN-10 pipe, 50mm OD(SDR-7.4) |
186 | External work including trenching, refilling etc. PN-16 pipe, 63mm OD(SDR-7.4) |
187 | Providing and fixing PPR Unions |
188 | for 25mm dia. |
189 | for 32mm dia. |
190 | for 40mm dia. |
191 | for 50mm dia. |
192 | for 63mm dia. |
193 | Providing and fixing PPR ball valves (RAK/ Astral/ Prince or equivalent) |
194 | for 25mm dia. |
195 | for 32mm dia. |
196 | for 40mm dia. |
197 | for 50mm dia. |
198 | for 63mm dia. |
199 | Providing and fixing of thermal insulation over following dia G.I Pipes at all heights. |
200 | for 15mm dia. |
201 | for 20mm dia. |
202 | for 25mm dia. |
203 | for 40mm dia. |
204 | Providing and fixing C.P. two way brass bib cock of approved quality (Jaguar- Continental/Hindware-contessa plus/equivalent) 15mm nominal bore |
205 | Providing & fixing G.I chain link fencing of approved size 50mmx50mm (3.15mm thick) including necessary bolts, welding etc complete |
206 | Providing and Laying Red Stone For dedo, flooring, Landings of staircase, etc. using red stone of minimum thickness 18 mm machine-cut slabs of approved quality, type & colour as per the approved sample, including cutting to required sizes, shapes and pattern as per drawing, and laying to the required level/slope including all surface preparation, providing and laying cement mortar (1:4) bed of average thickness 25 mm with cement slurry/paste spread on the top of mortar using grey cement, filling and finishing the joints with neat cement slurry/ white cement with matching colour pigment, curing, mirror polishing of joints if required, cleaning etc. complete at all floors and levels as per the instructions of the EIC. The Contractor shall arrange for storage of all related materials at site, handling, shifting and lifting at work location. |
207 | Providing & fixing various sizes of 15mm CP Nipples |
208 | Providing & fixing Booster pumps (kirlosker/crompton/equivalent make) |
209 | 0.5 hp |
210 | 1.0 hp |
211 | 1.5 hp |
212 | 2.0 hp |
213 | Providing and fixing of 450-600 mm long Washbasin connection nozzle end |
214 | Providing and fixing of Vertical blinds of required color as approved by EIC |
215 | Providing and fixing of roller blinds of required color as approved by EIC |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail