}

Proposed Construction Of 100 ( One Hundred ) Seated Sc GirlS Hostel [ G+1 Storied ] Building At Rangamati H.S. School, Amarpur, Gomati District, Tripura Under Scheme Of Babu Jagjivan Ram Chhatrawas Yojana ( Bjrcy ) Under Centrally Sponsored Sc, amarpur-Tripura

Public Works Department-PWD has published Proposed Construction Of 100 ( One Hundred ) Seated Sc GirlS Hostel [ G+1 Storied ] Building At Rangamati H.S. School, Amarpur, Gomati District, Tripura Under Scheme Of Babu Jagjivan Ram Chhatrawas Yojana ( Bjrcy ) Under Centrally Sponsored Sc. Submission Date for this Tender is 28-07-2022. Building Work Tenders in amarpur Tripura. Bidders can get complete Tender details and download the document.




Tender Notice

32893633
Proposed Construction Of 100 ( One Hundred ) Seated Sc GirlS Hostel [ G+1 Storied ] Building At Rangamati H.S. School, Amarpur, Gomati District, Tripura Under Scheme Of Babu Jagjivan Ram Chhatrawas Yojana ( Bjrcy ) Under Centrally Sponsored Sc
Open Tender
Indian
Tripura
amarpur
28-07-2022

Tender Details

Proposed Construction Of 100 ( One Hundred ) Seated Sc GirlS Hostel [ G+1 Storied ] Building At Rangamati H.S. School, Amarpur, Gomati District, Tripura Under Scheme Of Babu Jagjivan Ram Chhatrawas Yojana ( Bjrcy ) Under Centrally Sponsored Scheme ( Css ) During The Year 2022-2023 / Sh: Building Portion Including Internal Water Supply, Sanitary Installation, Sewage & Drainage Works

Key Value

Document Fees
INR 8000 /-
EMD
INR 557627.0 /-
Tender Value
INR 2.78 Crore /-

BOQ Items

Name of Work :Proposed construction of 100 (one hundred) Seated SC Girl"s Hostel [ G+1 Storied ] Building at Rangamati H.S. School, Amarpur, Gomati District, Tripura under scheme of Babu Jagjivan Ram Chhatrawas Yojana (BJRCY) under Centrally Sponsored Scheme (CSS) during the year 2022-2023 /SH: Building portion including Internal water supply, Sanitary Installation, Sewage & Drainage works.
Sl. No. Item Description
1SUB-HEAD : EARTH WORK
2Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. - All kinds of soil
3Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. - All kinds of soil
4Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. - All kinds of soil
5Extra for additional lift of 1.5m or part thereof. - All kinds of soil
6Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
7Supplying chemical emulsion in sealed containers including delivery as specified.
8(i) Chlorpyriphos/Lindane emulsifiable concentrate of 20%
9Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment as per IS: 6313 (Part III)- Latest revision (excluding the cost of chemical emulsion):
10(i) Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. - With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
11(i) Treatment of soil under plinth filling using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with sand filling: - With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
12SUB-HEAD : CEMENT CONCRETE WORK
13Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - - All work upto plinth level:
14(i) 1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size)
15(ii) 1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size)
16(iii) 1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size)
17Centering shuttering including struttings, propping etc. and removal of form work for:
18(i) Foundations, footings, bases for columns.
19Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer"s specification
20Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
21SUB-HEAD : RCC WORK
22Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- -All work upto plinth level:
23(i) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
24Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement-
25(i) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
26Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-
27(i) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
28Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with
29(i) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
30Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete uptoplinth level.
31(i) Thermo-Mechanically Treated bars of grade Fe-500D or more
32Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
33(i) Thermo-Mechanically Treated bars of grade Fe-500D or more
34Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand)etc. complete, excluding the plastering of jambs, sills and soffits
35(i) 50 mm thick
36Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size).
37Centering shuttering including struttings, propping etc. and removal of form work for:
38(i) Foundations, footings, bases for columns etc. for mass concrete with timber plank
39(ii) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply
40(iii) Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply
41(iv) Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply
42(v) Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply
43(vi) Stairs (excluding landings) except spiral-staircases with wooden plank
44(vii) Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards.
45(viii) Edges of slabs and breaks in floors and walls under 20 cm. wide
46(ix) Weather shade, Chajjas, corbels etc., including edges.
47SUB-HEAD : BRICK WORK
48First class brick work in foundation and plinth including cost of all materials as required complete:-
49(i) In cement mortar 1:4 ( 1 cement : 4 fine sand ).
50(ii) In cement mortar 1:6 ( 1 cement : 6 fine sand ).
51First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:-
52(i) In cement mortar 1:6 ( 1 cement : 6 fine sand ).
53Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-
54(i) In cement mortar 1:4 ( 1 cement : 4 fine sand ).
55Extra for providing & placing in position 2 nos 6mm dia MS bars at every 6th course offull brick masonry work including anchorage in joints of 75mm in each side in superstructure for all level including cost of all materials as required complete:-
56(i) In cement mortar 1:6 ( 1 cement : 6 fine sand ).
57Extra for providing & placing in position 2 nos 6mm dia MS bars at every 4th course ofhalf brick masonry work including anchorage in joints of 75mm in each side in superstructure for all levelincluding cost of all materials as required complete:-
58(i) In cement mortar 1:4 ( 1 cement : 4 fine sand ).
59SUB-HEAD : CLADDING WORK
60Providing and fixing gangsawcutofapproved thickness mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 ( 1 cement : 4 fine sand ) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing , curing, moulding and polishing to edges to give high gloss finish etc.complete at all levels:-
61(i) 18 mm thick Rajnagar Plain white marble/ Udaipur green marble/ Zebra black marble or equivalent duly approved:- - Area of slab upto 0.50 sqm.
62Providing edge moulding to approved thickness marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete at all levels as required as per design approved by the Engineer-in-charge:-
63(i) 18 mm Marble work.
64SUB-HEAD : WOOD & PVC WORK
65Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position :
66(i) Local Teak wood
67Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for paneled or paneled and glazed shutters 25 to 40 mm thick.
68(i) Local Teak Wood 16mm. Thick
69Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters.
70(i) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
71Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.
72(i) Fixed to openings /wooden frames with rawl plugs screws etc.
73Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone aggregate 20mm nominal size)
74Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
75(i) 300 x 16 mm
76(ii) 250 x 16 mm
77Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
78(i) 300 x 10 mm
79(ii) 250 x 10 mm
80Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
81(i) 125 mm
82(ii) 100 mm
83Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
84(i) Single rubber stopper
85Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge.
86Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screws.
87Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solventadhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter).
88Providing 50 × 50 × 50 mm Gamair wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement: 3 fine sand) and making good the walls etc.
89SUB-HEAD : STEEL WORK
90Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys& with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings,including applying a priming coat of approved steel primer etc. complete as required.
91Providing and fixingfan clamp type-Iof 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete.
92Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
93Providing and fixing M.S. round holding down bolts with nuts and wahser plates complete as per standard design.
94SUB-HEAD : ALUMINIUM WORK & STRUCTURAL GLAZING
95Providingandfixingaluminiumworkfordoors,windows,ventilators and partitions withextrudedbuiltupstandardtubularsections/ appropriateZsectionsandothersectionsofapprovedmake conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawingandthedirectionofEngineer­in­charge.(Glazingand paneling and dash fasteners to be paid for separately) :-
96(i) For fixed portion of approved quality:- - Anodisedaluminium(anodisedtransparentordyedto requiredshadeaccordingtoIS:1868,Minimumanodic coating of grade AC 15).
97(ii) For shutters of doors, windows & ventilatorsincluding providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):- - Anodisedaluminium(anodisedtransparentordyedto requiredshadeaccordingtoIS:1868,Minimumanodic coating of grade AC 15).
98Providing and fixing glazing of approved quality in aluminium doors,windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :-
99(i) With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm )
100(ii) With float glass panes of 5.5 mm thickness ( weight not less than 13.50 kg / sqm )
101Providing and fixing stainless steel ( SS 304 grade ) adjustable friction window stay of approved quality with necessary stainless steel screws etc. to the side hung windows etc. complete as per direction of Engineer-in-charge:-
102(i) 205 x 19 mm
103Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. of approved quality completeas per direction of Engineer-in-charge:-
104(i) Anodised aluminium of grade AC 15.
105Providing and fixing 100 mm brass locks (best make of approved quality) with 6 levers without pair of handles for aluminium doors including necessary cutting and making good etc. completeas per direction of Engineer-in-charge.
106SUB-HEAD : FLOORING AND SKIRTING WORK
107Providing and fixingMarble stone in floors over 20 mm thick bed ofcement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with of matching shade, including rubbing and polishingcomplete.
108(i) 18mm thick Marble Stone - Rajnagar plain marble
109Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 fine sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete.
110(i) 8mm thick Rajnagar marble tiles (polished)
111Providing and fixing Kota stone in floors over 20 mm thick bed ofcement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with ordinary cement mixed with pigment of matching shade, including rubbing and polishingcomplete.
112(i) Kota stone slab 25mm thick
113Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1 : 3 ( 1 cement : 3 fine sand ) and joined with ordinary cement slurry mixed with pigment to match the shade of slabs, including rubbing and polishing complete.
114Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete.
115(i) Double charged Stainfree vitrified tiles - Size of tile 60x60 cm
116Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622 - 2017, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete
117(i) Double charged Stainfree vitrified tiles - Size of tile 60x60 cm
118Providing and laying ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete.
119(i) Mat Finish Tiles - Ceramic Tiles 1st quality 400 x 400mm in all shades and designs
120(i) Anti-Skid Tiles - Ceramic Tiles 1st quality 400 x 400mm in all shades and designs
121Providing and fixing 1st quality ceramic glazed wall tiles (minimum 200 x 300) conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shadesof any size as approved by Engineer-in-charge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.
122Providing and fixing precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20 mm thick bed ofcement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry including rubbing and cleaning complete as per direction of the Engineer-in-Charge.
123Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete.
124(i) 40 mm thick
125Providing and fixing tactiles of standardized designs conforming to RNIB (The Royal National Institute for the Blind, UK), DETR (Department of the Environment, Transport and the Regions, UK) & ADA (Americans with Disabilities Act, USA) of size 300 x 300 mm in floors, (thickness to be specified by the manufacturer) specially designed to assist the visually impaired - “foot braille”, with water absorption less than 0.5%, of approved brand & manufacturer, laid on 20 mm thick bed ofcement mortar 1 : 4 ( 1 cement : 4 fine sand ) including grouting of joints (Payment for grouting of joints to be made separately)
12680 mm thick factory made c.c.interlockingpaver block of M-35 Grade Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method to attain superior smooth finish using PU or equivalent moulds, laid in required grey colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per specifications & approval/ direction of the Engineer -in-Charge: (a) 80 mm thick c.c. paver block of M-35 grade with approved colour, design and pattern.
127SUB-HEAD : ROOFING AND CEILING WORK
128ProvidingandfixingonwallfaceunplasticisedRigidPVCrainwater pipes (working pressure 4 kg/cm2)conformingto IS : 13592 Type Aincludingjointingwith sealring conformingtoIS:5382leaving10mmgapforthermalexpansion:
129(i) Single socketed pipe - 110 mm OD
130Providingandfixing on wallface unplasticised - PVCmouldedfittings/ accessoriesfor unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type-Aincludingjointingwith sealringconformingtoIS : 5382 leaving 10 mm gap forthermalexpansion:
131(i) Coupler - 110mm
132(ii) Single equal tee with door - 110 x 110 x 110 mm
133(iii) Single equal tee without door - 110 x 110 x 110 mm
134(iv) Bend 87.5 - 110mm
135(v) Plain shoe - 110 mm
136Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVCrainwater pipesbymeansof50x50x50mmhard woodplugs,screwedwithM.S.screwsofrequiredlengthincluding cutting brick work andfixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.
137(i) 110mm
138Providing and fixing to the inlet mouth of rain water pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. complete.
139(i) 100 mm
140SUB-HEAD : FINISHING WORK
14112 mm cement plaster of mix
142(i) In cement mortar 1 : 4 ( 1 cement : 4 fine sand )
143(ii) In cement mortar 1 : 6 ( 1 cement : 6 fine sand )
14415 mm cement plaster on the rough side of single or half brick wall of mix:
145(i) Cement mortar 1:6 (1 cement : 6 fine sand)
1466 mm cement plaster of mix:
147(i) In cement mortar 1 : 3 ( 1 cement : 3 fine sand )
148Neat cement punning.
149Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :
150(i) New work ( two or more coats) over and including water thinnable priming coat with cement primer.
151Finishing walls with premium acrylic smooth exterior paint with Silicon additives of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :
152(i) New work ( two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
153Applying priming coat [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :
154(i) With ready mixed Pink or Grey primer of approved brand and manufacture on wood work ( hard & soft wood ).
155Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]:
156(i) Two or more coats on new work
157SUB-HEAD:WATER PROOFING WORK
158Grading roof for water proofing treatment complete as required as per direction of the Engineer-in-charge with :
159(i) Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size)
160(ii) Cement mortar 1:4 (1cement : 4 fine sand)
161Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound, as directed by Engineer-in-Charge and consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
162SUB-HEAD : SANITARY WORKS
163Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushingcisternwithmanuallycontrolleddevice(handlelever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
164(i) White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests.
165Providingandfixingwhitevitreouschinapedestaltypewatercloset (Europeantype W.C.pan)withseatandlid,10litrelowlevelwhite P.V.C.flushing cistern withmanually controlled device (handlelever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
166(i) W.C. pan with ISI marked white solid plastic seat and lid
167Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.
168Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:
169(i) Flat back wash basin of size 550x400mm.
170Providing and fixing kitchen sink including making all connections excluding cost of fittings.
171(i) White glazed fire clay sink of size 600x450x250mm.
172Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
173(i) Semi rigid pipe - 32 mm dia
174(ii) Flexible pipe - 32 mm dia
175Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
176Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
177Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approvedquality and colour.
178(i) 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms.
179Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms.
180Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colours weighing not less than 80 gms.
181ProvidingandfixingonwallfaceunplasticisedRigidPVC rain water, soil, waste & vent pipes (working pressure 6 kg / cm2)conformingto IS : 13592 Type Aincludingjointingwith sealring conformingtoIS:5382leaving10mmgapforthermalexpansion:
182(i) Single socketed pipe - 110 mm OD
183Providingandfixing on wallface unplasticised - PVCmouldedfittings/ accessoriesfor unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type-Aincludingjointingwith sealringconformingtoIS : 5382 leaving 10 mm gap forthermalexpansion:
184(i) Coupler - 110mm
185(ii) Single pushfit Coupler - 110 mm
186(iii) Single equal tee with door - 110 x 110 x 110 mm
187(iv) Single equal tee without door - 110 x 110 x 110 mm
188(v) Doubleequal junction of required degreewithout door - 110x110x110 x110 mm
189(vi) Doubleequal junction of required degreewith door - 110x110x110 x110 mm
190(vii) Bend 87.5 - 110mm
191(viii) Plain shoe - 110 mm
192Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVCrainwater, soil, waste & vent pipesbymeansof50x50x50mmhard woodplugs,screwedwithM.S.screwsofrequiredlengthincluding cutting brick work andfixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.
193(i) 110mm
194Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4(1cement: 4 coarse sand):
195(i) 100 mm dia.
196SUB-HEAD : WATER SUPPLY
197Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge. - Internal work - Exposed on wall.
198(i) 15 mm dia. nominal bore
199(ii) 20 mm dia. nominal bore
200(iii) 25 mm dia. nominal bore
201(iv) 40 mm dia. nominal bore
202Making connection of G.I. distribution branch with G.I. mainfollowing sizes by providing and fixing tee, including cutting and threading the pipe etc. complete as per CPWD specification and direction of the Engineer - in - charge.
203(i) 25 to 40 mm nominal bore
204Providing and fixing brass bib cock of approved quality :
205(i) 15 mm nominal bore
206Providing and fixing brass stop cock of approved quality :
207(i) 15 mm dia nominal bore
208Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
209(i) 25 mm nominal bore
210(ii) 40 mm nominal bore
211Providing and fixing gun metal non-return valve of approved quality (screwed end):
212(i) 25 mm nominal bore -Vertical
213(ii) 40 mm nominal bore - Vertical
214Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
215Constructing masonryChamber 30x30x50 cm, inside , in brick workincement mortar1:4 (1 cement :4 fine sand) forstopcock, withC.I.surface box100x100x75mm (inside)with hingedcover fixedincement concreteslab1:2:4mix (1 cement:2 coarsesand:4gradedstoneaggregate20mmnominalsize) necessary excavation foundationconcrete 1:5:10 ( 1cement :5fine sand:10gradedstoneaggregate40mmnominalsize)andinside plastering with cement mortar 1:3 (1 cement :3 coarsesand) 12mm thick finishedwithafloatingcoatofneatcementcompleteasper standard design :
216(i) With Second Class bricks
217Painting G.I. pipes and fittings with synthetic enamel white paint with two coats overa ready mixed priming coat, both of approved quality for new work :
218(i) 15 mm diameter pipe.
219(ii) 20 mm diameter pipe.
220(iii) 25 mm diameter pipe.
221(iv) 40 mm diameter pipe.
222Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
223(i) 15 mm diameter pipe
224(ii) 20 mm diameter pipe
225(iii) 25 mm diameter pipe
226(iv) 40 mm diameter pipe
227Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :
228(i) 15 mm nominal bore.
229(ii) 20 mm nominal bore.
230(iii) 25 mm nominal bore.
231(iv) 40 mm nominal bore.
232Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:
233(i) 100 mm diameter
234Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms.
235SUB HEAD : SEWAGE AND DRAINAGE WORKS
236Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete :
237(i) 150 mm diameter
238Providing and laying cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) alround S.W. pipes including bed concrete as per standard design:
239(i) 150 mm diameter S.W, pipe
240Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with well burnt 2nd class bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
241Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 1st class bricks in cement mortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 fine sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 fine sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
242(i) Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :
243Extra for depth beyond 450 mm of brick masonry chamber for underground C.I. inspection chamber with same specification as mentioned in item no 20.330 complete as per standard design :
244(i) For 500x700 mm size
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail