University Of Pune-UOP has published Repairs To Aganmanch And Allied Civil Work At Centre For Performing Arts At Savitribai Phule Pune University Excavation M 10 Pccm25 Rcc Toilet Repairs Brick Masonary Granite Work Sand Faced Plaster Painting Work Structural Steel Work Tubular Steel Work Pr. Submission Date for this Tender is 18-07-2022. Shed Construction Tenders in Pune Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts complete. Spec. No: - As directed by Engineer in charge |
| 2 | Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts, complete. Spec : As directed by Engineer In Charge |
| 3 | Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts, complete. Spec : As directed by Engineer In Charge |
| 4 | Dismantling stone masonry in lime or cement including stacking the materials as directed with all leads, lifts, complete. Spec : As directed by Engineer In Charge |
| 5 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.)By Manual Means Spec. No.: Bd.A.1 Page No. 259 |
| 6 | Excavation for foundation in hard murum including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling ramming, watering including shoring and strutting etc. complete. ( Lift Upto 1.5 m.)a) By manual means Spec. No: - Bd.A.2 Page No. 259 |
| 7 | Excavation for foundation in Soft rock and old cement and lime masonry foundations includingremoving the excavated materials upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum ramming, watering etc. complete. (Lift upto 1.5m).Spec. No.: Bd.A.5 Page No. 259 |
| 8 | Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated materials upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum ramming, watering etc. complete. (Lift upto 1.5m).Spec. No.: Bd.A.5 Page No. 259 |
| 9 | Filling in plinth & floors with contractors soil sand or murum in 15cm to 20cm layers including watering and compaction complete Sp. No. Bd A 11 Page No.263 |
| 10 | Filling in plinth & floors with approved excavted materialin 15cm to 20cm layers including watering and compaction complete Sp. No. Bd A 11 Page No.263 |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping,compacting, roughening them if special finish is to be provided,finishing if required and curing complete,with reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc.complete. With natural sand/V.S.I. quality Artificial Sand Bd. E. 1 Page No. 287 |
| 12 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38 |
| 13 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38 |
| 14 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Spec. No.: Bd.F.5 Page No. 300 and B-7,Page No 38. |
| 15 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand, Spec. No: - Bd. F.12 Page No.304 & B 7 Page 38 |
| 16 | Providing and fixing in position TMT-FE-500 reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec. No: - Bd.F.17 Page No. 306 |
| 17 | Providing dry/trap/granite/gneiss rubble stone soling 15 cm to 20 cm thick including hand packing & compacting complete. Spec. No: - Bd. A.12 Page No.264 |
| 18 | Providing fly ash brick masonry (Steam Cured)with conventional / I.S. type fly ash brick in cement mortar 1:6 including striking joints, racking out joints watering and scaffolding complete. For foundation & plinth Spec. No.: As director by engineer incharge and BDG-2&5 |
| 19 | Providing fly ash brick masonry (Steam Cured)with conventional / I.S. type fly ash brick in cement mortar 1:6 including striking joints, racking out joints watering and scaffolding complete. For superstructure.Spec. No.: As director by engineer incharge and BDG-2&5 |
| 20 | Providing Second class fly ash brick masonry (Steam Cured) with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete.Bd. G. 7 Page 316 |
| 21 | Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water, striking joints on un exposed faces and watering complete. Spec.No.:Bd.H.1PageNo.329 |
| 22 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete. Spec. No.: Bd. L.2 Page No. 368 |
| 23 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing complete. Spec. No.: Bd.L.4 Page No. 368 |
| 24 | Providing neeru finish to plastered surfaces in all positions including scaffolding and curing complete. Spec. No.: Bd. L.10, Page No.370 |
| 25 | Providing sand faced plaster externally in cement mortar using approved screened sand in. all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 Kg. per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment of 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days, scaffolding etc. complete. Bd.L.7 Page No. 369 |
| 26 | Providing tuck pointing with cement mortar 1:3 for stone masonry including scaffolding and curing complete. Spec. No.: Bd. L. 16 Page No. 373 |
| 27 | Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done on inside watering and scaffolding etc.complete. |
| 28 | Providing and laying Rough Shahabad Stone Flooring 25mm to 30mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete. |
| 29 | Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. |
| 30 | Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. |
| 31 | Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. |
| 32 | Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete. For Flooring |
| 33 | Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete. For Skirting |
| 34 | Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. |
| 35 | Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. |
| 36 | Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.. |
| 37 | Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 38 | Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 39 | Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. |
| 40 | Providing and laying vitrified mirror / glossy finish tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. b) Skirting Spec. No.: Bd.M. 12 Page No.385 |
| 41 | Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete. |
| 42 | Providing fixing country teak wood battens 50 mm x 25 mm for Mangalore tile roof work with all iron work scaffolding and oiling the battens etc. complete. |
| 43 | Providing fixing teak wood battens 25 mm x 12 mm for Mangalore tile roof work with iron work scaffolding and oiling the battens etc. complete. |
| 44 | Removing and resetting Mangalore tiles from roof including refixing loose battens etc.complete. |
| 45 | Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). |
| 46 | Providing and fixing Mangalore tiled roofing with class "AA" tiles including securing the last course of tiles near the eaves with steel flat 40 mm x 3 mm and 1.22 mm wire fixing country teak wood sloping battens of 25 x 12 mm teak wood horizontal battens of 50mm x 25mm over the slopping battens, all iron work and coal tarring the battens etc. complete (Excluding ridge and hip tiles). |
| 47 | Providing and fixing Mangalore tile ridge and hip tiles of class "AA" including scaffolding if necessary, pointing with coloured cement mortar and curing etc. complete. |
| 48 | Providing and fixing Indian teak wood framed collar beam / king post / queen post truss, with all Iron work including scaffolding, if necessary, and one coat of primer etc. complete. |
| 49 | Providing and fixing country teak wood common rafters, purlins and purlin cleats, hip rafters, jack rafters, ridges, wall plates, post plates and posts for roofing etc. including scaffolding, if necessary, all iron work and one coat of primer etc. complete. |
| 50 | Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 Kilogram/sq.m.). |
| 51 | Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). |
| 52 | Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 120 cm wide with teak wood planking 20 mm thick including two coats of coal-tarring the upper surface of plank etc. complete. (excluding painting to underside of plank). |
| 53 | Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 90 cm wide with teak wood planking 20 mm thick including two coats of coal-tarring the upper surface of plank etc. complete. (excluding painting to underside of plank). |
| 54 | Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete. |
| 55 | Providing fixing country teak wood battens 50 mm x 25 mm for Mangalore tile roof work with all iron work scaffolding and oiling the battens etc. complete. |
| 56 | Providing fixing teak wood battens 25 mm x 12 mm for Mangalore tile roof work with iron work scaffolding and oiling the battens etc. complete. |
| 57 | Providing and fixing 10 cm PVC nahani trap with grating etc. complete |
| 58 | Providing and fixingPVC MULTI nahani trap with grating etc. complete. Spec. No: - As directed by Engineer in charge |
| 59 | Providing and fixing 25 mm dia ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete.Spec. No: - As directed by Engineer-in-charge |
| 60 | Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete |
| 61 | Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete |
| 62 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters |
| 63 | Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. |
| 64 | Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete. |
| 65 | Providing and fixing C.P.Two way BIB cock of approved make continental including necessary sockets/union nut etc. complete. |
| 66 | Providing and fixing C.P. pillar cock long neck with aerator of approed make including necessary sockets/union nut etc. complete. |
| 67 | Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete. |
| 68 | Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks,including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete |
| 69 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1;4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. Spec. No.: Bd. M.22 B/Page No. 390 |
| 70 | Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kg/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete.(using 100% crushed sand) Spec. No.: Bd. M-12 page No. 385 |
| 71 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required. Spec : As directed by Engineer In Charge |
| 72 | Providing and applying priming coat over new/old steel and other metal surfaces including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wool, scrappers and sand paper, scaffolding etc. complete. Spec : As directed by Engineer In Charge |
| 73 | Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.Spec. No: - Bd P. 5 Page No. 413 |
| 74 | Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) complete. Spec. No.: Bd.0.5 Page No. 405 |
| 75 | Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. |
| 76 | Providing and applying 2 coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) complete.Spec. No.: Bd.0.7 Page No. 406 |
| 77 | Providing and making Holes (Core cutting ) in chajjas and slab for passing the pipe line. Spec. No: - As directed by Engineer in charge |
| 78 | Providing and making Holes (Core cutting ) in U.C.R. wall for passing the pipe line. Spec. No: - As directed by Engineer in charge |
| 79 | Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm centerto-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre) |
| 80 | Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 mm,comprising of nominal 25mm exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenterto-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre) 600 mm girth (Surface Width). |
| 81 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed designs and drawing including fixing in position without connecting plates, braces etc. and one coat of anticorrosive paint and over it two coat of oil paintings of approved quality and shade complete. Spec. No: - Bd.-C 2 Page No. 275 |
| 82 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position,Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting complete, Spec. No.: Bd.C.8 Page No. 278 |
| 83 | Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc.complete. Spec. No. : As directed by Engineer-in-charge. AndB-18 Page No. 78 |
| 84 | Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Spec. No: - Bd. M . 3B Page No. 380 |
| 85 | Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete. Spec. No.: As directed by Engineer in charge |
| 86 | Material Shifting by truck Spec. No: - As directed by Engineer in charge |
| 87 | Mazdoor, Unskilled Heavy Male/Female Spec. No: - As directed by Engineer in charge |
| 88 | Repair & maintenanceof BB Chambers by increasing ht. upto 300 mm Spec. No: - As directed by Engineer in charge |
| 89 | Repair & maintenance of BB Chambers by decreasing ht. upto 300 mm Spec. No: - As directed by Engineer in charge |
| 90 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. |
| 91 | Removing battens from roof and stacking them as directed with all leads and lifts etc. complete. |
| 92 | Removing purlins from roof including stacking as directed with all leads , lifts etc. complete. |
| 93 | Removing rafters from roof including the materials as directed with all leads , lifts etc. complete. |
| 94 | BASIC TEST OF CEMENT:-. Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness. |
| 95 | BASIC TEST OF AGGREGATE.:-Water Absorption, Specific Gravity,Impact Value, Crushing Value. |
| 96 | Sieve Analysis. |
| 97 | Abrasion value |
| 98 | Flakiness index and elongation index |
| 99 | Soundness |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
