}

Construction Mahila Kalyan Parishad Building At Reckong Peo In District Kinnaur Hp ( Sh- Building Portion, Ground Floor, W.S. And S.I., Site Development And Septic Tank, kinnaur-Himachal Pradesh

Public Works Department-PWD has published Construction Mahila Kalyan Parishad Building At Reckong Peo In District Kinnaur Hp ( Sh- Building Portion, Ground Floor, W.S. And S.I., Site Development And Septic Tank. Submission Date for this Tender is 06-07-2022. Septic Tank Tenders in kinnaur Himachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

32816792
Construction Mahila Kalyan Parishad Building At Reckong Peo In District Kinnaur Hp ( Sh- Building Portion, Ground Floor, W.S. And S.I., Site Development And Septic Tank
Open Tender
Indian
Himachal Pradesh
kinnaur
06-07-2022

Tender Details

Construction Mahila Kalyan Parishad Building At Reckong Peo In District Kinnaur Hp ( Sh- Building Portion, Ground Floor, W.S. And S.I., Site Development And Septic Tank

Key Value

Document Fees
INR 2000 /-
EMD
INR 181000.0 /-
Tender Value
INR 90.33 Lakhs /-

BOQ Items

Name of Work:C/O Mahila Kalyan Parishad Building at Reckong Peo in Distt. Kinnaur (H.P).( SH:- C/OBuilding Portion Ground Floor,W.S & S.I ,site development and septic tank )
Sl. No. Item Description
1Excavationworkbymechanicalmeans(Hydraulicexcavator)/manual meansinfoundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..
2Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, includinggetting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : all kind of soilincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..
3Earth work in excavation by mechanical means (Hydraulic excavator)/manual meansover areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m,as directed by Engineer-in-charge. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..
4Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..
5Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..
6Providing and laying cement concrete 1:6:12 (1 cement:6 sand : 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in Foundation and plinth: including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..
7Providingandlayinginpositionspecifiedgradeofreinforcedcement concrete,excludingthecostofcentering,shuttering,finishingand reinforcement - All work up to plinth level : 1:1.5:3 -1 cement:1.5coarsesand):3gradedstoneaggregate 20mm nominal size) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..
8Reinforcedcementconcreteworkinwalls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stoneaggregate 20 mm nominal size) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..
9Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor fivelevel,excludingthecostofcentering,shuttering,finishingand reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) :3 graded stone aggregate 20 mm nominal size). including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..
10Centering and shuttering including strutting, propping etc. and removal of form for all heights :form for all heights :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..
11Foundations, footings, bases of columns, etc. for mass concrete
12Suspended floors, roofs, landings, balconies and access platform
13Columns, Pillars, Piers, Abutments, Posts and Struts
14Stairs, (excluding landings) except spiral-staircases
15Lintels, beams, plinth beams, girders, bressumers and cantilevers
16Edges of slabs and breaks in floors and walls
17Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc.
18Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in mouldings as in cornices, windows sills etc, including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand):3 graded stone aggregate 20 mm nominal size).including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..
19Steelreinforcement (TATA /SAIL / JINDAL PANTHER/RINL) for R.C.C. work includingstraightening,cutting,bending, placing in position and binding all complete upto plinth level. ThermoMechanically Treated bars of grade Fe-500D or more steel barsincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including allncidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or othertaxes imposed by the Governmentincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charg
20Steelreinforcementfor (TATA /SAIL / JINDAL PANTHER/RINL)R.C.C.workincludingstraightening,cutting,bending, placing in position and binding all complete above plinth level.ThermoMechanically Treated bars of grade Fe-500D or more steel barsincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including allncidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or othertaxes imposed by the Government including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
21Providing and Layingstone soling hand packed under flooringincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
22BrickworkwithcommonburntclayF.P.S. (nonmodular)bricksofclass designation 7.5 in superstructure above plinth level up to floor V level in all shape s and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
23Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (1 cement :4 coarse sand)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
24Brickwork using common burnt clay building bricks 23 cm thick rat trap bond brick wall with cement mortar1:6( 1 cement : 6 and)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
25Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
26Providingandlayinginpositioncementconcreteofspecifiedgrade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
27Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished,machinecutforkitchenplatforms,vanitycounters,windowsills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), jointstreatedwithwhitecement,mixedwithmatchingpigment,epoxy touchups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
28Providingedge moulding to 18mmthick marble stone counters,Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble workincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
29Providinf and fixingM.S grill of required pattern in fram of windows etc. with M.S flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to steel windows by weldingincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
30Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand :6 graded stone aggregate 20mm nominal size).
31Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
32300x16mm
33250x16mm
34Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
35250x10 mm
36200x10 mm
37150x10 mm
38100x10 mm
39Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
40125 mm
41100 mm
42Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
43Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
44Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
45Structural steel work in single section, fixed with or without connecting plate,includingcutting,hoisting,fixinginpositionand applying a priming coatof approved steel primer all complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
46Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all completeincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
47Steel work welded in built up sections/ framed work, including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer usingstructural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
48Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tubeincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
49Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry,but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregateincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
50Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry,including rubbing and polishing complete with : Makrana white second qualityincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
51Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
52Providing and fixingpanellrd glazed or panelled and glazed shutter for door and windowclesestory windows,including black enamelled iron butt hings with necessary screws 40 mm thick in 2nd class deodar woodincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
53Providing and fixing 75MMX60MM rounded hand rails in straight length complete in.2ND class Kail woodincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
54Providing and fixing wire gauge shutter using galvanished M.S. wire gauge of I.S. gauge designation 85 G with wire of dia 0.56 mm for door windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws 40 mm thick in 2nd class deodar wood.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
55Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25MM thick including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
56Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
5740 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. Red sand stoneincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
58Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
59Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with greycement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
60Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I . rain water pipes embedded in and including cement concrete blocks 10x10x10cmof1:2:4mix(1cement:2coarsesand:4gradedstone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : 150mm diaincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
61Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm diameterincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
62Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6315 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement : 6 sand)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
646 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
65Distempering with dry distemper of approved brand and manufacture (two or morecoats)ofrequiredshadeonnewwork,overandincludingwater thinnable priming coat to give an even shade.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
66Distemperingwithoilboundwashabledistemper ofapprovedbrandand manufacture to give an even shade : New work (two or more coats) over including and water thinnable primming coat with cement primerincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
67Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
68Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufactureincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
69Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade.Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufactureincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
70Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new workincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
71Providing and applying white cement based putty of average thickness 1 mm,ofapprovedbrandandmanufacturer,overtheplastered wallsurfaceto prepare the surface even and smooth complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
72Providing and fixing brass curtain rods ofwall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 25 mm diameter.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
73Providing and fixing bright finished brass hard drawn hooks and eyes : 100 mmincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
74Providing and fixing 12 mm thick prelaminated board both side bwp phenol bonded exterior / interior grade panelled shutters with frame of firest class deodar wood for doors including bright finished / black enamelled iron butt hinges with necessary screws 40 mm thick frams. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
75Providing and fixing19MM thick commercial board water proof shutters for up boards i/c fixing with nickel plated piano hings with screws etc complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
76Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete).including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
77Providing and fixingsquare edges cover fillets ( beading) 19mmm x 6mm section i/c mitring at junction with wood screws and nail complete . 1at class Indian teak wood including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
78Providing and fixing 8 mm thick water proof ply in walls fixed with nails and screws complete as per architectural drawing including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
79Providing and fixingDouble glazed panel with rubber gasket to fill the air gaps in windows complete in all respectincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
80P/F Rai wood panelling with plank size 75x25 mm & 75mmx12.5mm in combination over frame of wood (to be paid seprately ) with top moulding complete in all resapect including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
81White glazed tile 6 mm thick fiber cement board of ciling of Everst or its Equavelent with screw and nails etc. complete ( frame work upto be measured and paids for seperately ) including carriage of material upto all leads and liftsincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
82Providinf and fixing 2mmthick PVC antistatic venly Flooring plain or coloured, carbed or masaic / mettaled finished laid with approved adhesive on sub- floor ( damp proofingtretment to be paid seperately)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
83Providing and laying 60mm thick faciory made cement concrete interlocking paverblockofM-30grade made by block making vibratory compaction, ofapproved s;ze, design & shape, laid machine with strong in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction ofEngineer-in-chargeincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
84Providing and fixing HDF decorative laminated core board German Kerono floring AC4 class 8 mm thick placed over cushion of 2mm thick expanded polythene foam plus 100 micron thick polythens sheet under lay on 045 beech west including border of required shade and colour complete in all respect upto all floor level i/c carriage of material in all leads and lifts including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
85Providing and fixing GRC 12 mm cladding on RCC surface side as on faces of Arch masonary walls etc. om 12 mm thick cement plaster 1:3 (1 cement : 3 sand ) and joining with cement slurry i/c scraffolding etc. completeincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
86Providingandfixingonwallface - PVCaccessories forrain water pipesincluding fillinf the joints with approved adhesive completeincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
87PVC Plain bend 150mm dia
88PVC concrete type bend 150mm dia
89PVC shoe 150mm dia
90Providingandfixing M.S. BP sheet 1.66 mm to 2 mm thick in eaves board / facia / soffit / ceiling including cutting , fixig and welding steel roof members and applying a coat of red lead primer complete as per instruction of Engineer - in - charge ( base memeber of steel work shall be meaured & paid separtely)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
91Providingandfixing PGI sheet lining with 0.63 mm thick sheet of aproved quality butt jointing and nails etc complete including carriage of material, labour, tools and plants through all modes of transportion within all leads and lifts.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
92Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including 250 mm diameter S.W. pipeincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
93Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin: 32 mm diaincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
94Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushingcistern, including flush pipe, with manually controlled device (handle lever) conformingtoIS:7231,withallfittingsandfixturescomplete,including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size type foot rests 580x440 mm with integralincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
95Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,32mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar tapsincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
96Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
97Providing and fixing CP Brass Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. 32mm diaincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
98Providing and fixing 100 mm sand cast Iron grating for gully trap. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
99Providing and fixing 600x450 mm beveled edge mirror of superior glass (of pprovedquality)completewith6mmthickhardboardgroundfixedto wooden cleats with C.P. brass screws and washers completeincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
100Providingandfixing 600x120x5 mmglassshelfwithedgesroundoff, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
101Providing and fixing toilet paper holder :C.P. brassincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
102Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specialsofstandardmakeand mosquitoproofcouplingofapproved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
103Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gmsincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
104Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal boreincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
105Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stopto be paid separately).including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
106Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length15 mm diaincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
107Constructing masonry Chamber30x30x50 cminside,inbrick workincement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
108Constructing masonry Chamber60x60x75 cm,insidein brick work incement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
109P/F GI union for wash basin 32 mm dia wash basinincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
110P/F CP brass trap for wash basin 32 mm dia wash basinincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
111P/F Chromium plated brass soap dish with C.P
112P/F CP Brass bib tap 15mm dia
113Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal boreincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
114P/F brass full way valve with wheel 20 mm dia. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
115P/F G.I/M.I Union of following sizesincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
11615mm dia
11720mm dia
118Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of direction of the engineer in charge.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
11916MM (L.S)
12020MM (L.S)
121P/F composite end seal compression fittingincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
122Equal Teei) 1216
123ii)1620
124Reducing tee:-1620 x all branches
1252025*2020
126Femal branch tee :-1216 x 1216 x 15 mm thread
1271620 x 1620 x 20 mm thread
128Femal elbow:- 1216 x 15 mmthread
1291620 x 15 mm thread
130Male thread connector1216 x 15 mmthread
1311620 x 15 mm thread
132Femal thread connector :-1216 x 15 mmthread
1331620 x 15 mm thread
134Coupler:- 1216
135ii) 1620
136Reducer 1620 x 1216
1372025 * 1216
138P/FPVC water storage tank 2000 ltr. Capacityincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
139P/F PVC floor trap 110 x 75 mmincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
140P/F high pressure PVC spigot and socket , waste and ventilating pipes ISI markedincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
14175mm dia
142110 mm dia
143150 mm dia
144P/F PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm tick bolts and nuts completeincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
145150mm
146110mm
14775mm
148P/F PVC door bend with ovalaccess door, insertion rubber washer 3 mm thick bolts and nuts ISI marked completeincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
149150mm dia
150110 mm dia
15175 mm dia
152P/F PVC collar ISI markedincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
153150 mm dia
154110 mm dia
15575 mm dia
156P/F PVC plainbend ISI markedincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
157150 mm dia
158110 mm dia
15975 mm dia
160P/F PVC doubleequal branch with oval access door insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. completeincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
161150 mm dia
162110 mm dia
163P/F PVC plain doubleequal branch ISImarked complete including fixing with approved adhesive etc. completeincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
164150 mm dia
165110mm dia
166P/FPVC Clamps ISI marked of adhesive design with steel screws and rawl plugs etc. complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
167150 mm dia
168110mm dia
169P/F PVC Cowl ISI marked including joining the cowl with the PVC pipe with adhesive etc. complete .including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
170150 mm dia
171110mm dia
172P/F PVC reducer ISI marked including joining with approved adhesive etc complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
173150 mm x110 mm dia
174110 mm x 75 mm dia
175Chase in stone / brickmasonary walls for fixing sand cast iron / cast / spun iron pipes and fitting including maling good the same with stone/ brick work in cement mortar 1:3 ( 1 cement : 3 sand)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
176150 mm dia
177110mm dia
178P/F PTMT coloured / Whiteautomatic flushing cistern with a pair of PVC / C.I or M.S. bracket complete with fitting including PVC syphonic apparatus, mosquitoproof lid, PVC unionn and coupling forconnection with inlet , outlet and over flowpipe including cutting holes and making good the same ( over flow pipe to be measured and plain for separately). 10ltr. net capacity bhindware or its equyivalent in white shadeincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
179P/F PTMT ball valve of approved quality and colour 15mm nominl bore including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
180P/F PTMT jet spray of approved quality and colourwith onemeter tube.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
181Construct RCC manhole with RCC top slab in 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size ) inside plastering 15 mm thick with cement mortar 1:3 ( 1 cement : 3 sand ) finished with a floating coat of neat cement Inside size 800 mm x 800 mm and 500 mm including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
182Providing weapholes in brick masonary b/ stone masonary/ plain reinforcement concrate vabutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structure with slop of 1(v) : 20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
183Back flling behind abutment , wing wall and return wall boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
184Fencingwithangleironpostplacedat requireddistance embeddedin cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire
185Supplying and filling in plinth with sand under floors, including watering, ramming,consolidating and dressing complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
186Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (1 cement :4 coarse sand)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
187Squared rubble masonry coursed with hard stone in foundation and plinth with :Cement mortar 1:4 (1 cement : 4coarse sand)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
18815 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
189Constructing Soak pit 1.20 X 1.20 m filled with brick bats including S.W Drain ipe 100mm Diameter and 1.20m long complete as per standard designincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
190Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipe ISI marked : 110 mm dia.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
191Providing and fixing PVC single equal branch with ovalaccess door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete : 110 mm diaincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
192Providing and fixing110 mm dia PVC cowl including carriage of material within all leads and lifts.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
193Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D- 2.5including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail