Tender For Office Renovation And Repair-- Supply And Installation Of Partition Wall For Cubical: The Wall Should Be Made Of 2*2 Hard Wood Frame With Proper Insulation ( Glass Wool ) , 12 Mm Ply On Both Side And 1 Mm Thickness Laminate ( Approved Make , KOLKATA-West Bengal

Tender For Office Renovation And Repair-- Supply And Installation Of Partition Wall For Cubical: The Wall Should Be Made Of 2*2 Hard Wood Frame With Proper Insulation ( Glass Wool ) , 12 Mm Ply On Both Side And 1 Mm Thickness Laminate ( Approved Make Or Equivalent Brand ) . There Should Be Highlighter On Exterior Of Partition Wall As Per Other Cubical Of 4Th Floor. The Top Of Partition Wall Should Be As Per Sample Installed In 4Th Floor. The Final Appearance And Job Should Be As Per Other Cubical Installed In The 4Th Floor. The Wall Should Be Stable And Should Be Properly Fixed In The Floor, Front Table With Drawer: Supply And Installation Of Front Table Of Approximate Size 5 Ft X 2 Ft 3 Inch With 3 Number. Of Side Drawer, Key Board Fixture, Space For Keeping File At The Bottom, Foot Rest And Corner Hole As Per Other Cubical In The 4Th Floor. The Table Should Be Made With 19 Mm Ply And 1 Mm Laminate ( Make - Century Ply, Green Ply Or Equivalent Brand ) With 8 Mm Glass At The Top And Wooden Beat. Vendor Should Visit The Site And See The Sample ( Other Cubical In 4Th Floor ) . The Drawer Should Have Proper Locking Arrangement, Handle ( Approved Make Or Equivalent Brand ) And Channel Of Approved Make, Providing And Storage Cabinet 450 / 600 ( Approx. ) Mm Deep ( Wall Or Floor Mounted ) Made Of 19Mm Th. B.W.P. Plywood Conforming To Is 710 And Back Of 12Mm Thickbwr Plywood , Having Adjustable Shelves, Drawer Units And Operable Cabinet Hinged Shutters Of 19M, Supply And Installation File Cabinets-Woodwork-Building / Carpentry Work-Providing And Fixing Storage Unit For File Rack Fabricated With 18 Mm Thick Marine Quality Plywood With Inside Required Shelves. Rear Side 8 Mm Thickness Plywood May Be Used. File Rack To Be Finished With Approved Laminate Of 1 Mm Thickness On Both The Sides Including All Required Hardware And Accessories Such As Locks, Handles Etc. Of Approved Design And Make Complete

Refer document

Refer document

Refer document