}

Painting To Jetty Floors And Sea Face Wall At Required Jetties In View Of Regular Vvip Visits At Naval Dockyard, Visakhapatnam Under Ge (I) Dm, Visakhapatnam, visakhapatnam-Andhra Pradesh

Military Engineer Services-MES has published Painting To Jetty Floors And Sea Face Wall At Required Jetties In View Of Regular Vvip Visits At Naval Dockyard, Visakhapatnam Under Ge (I) Dm, Visakhapatnam. Submission Date for this Tender is 02-08-2022. Jetty Tenders in visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

32746879
Corrigendum : Painting To Jetty Floors And Sea Face Wall At Required Jetties In View Of Regular Vvip Visits At Naval Dockyard, Visakhapatnam Under Ge (I) Dm, Visakhapatnam
Open Tender
Indian
Andhra Pradesh
visakhapatnam
02-08-2022

Tender Details

Painting To Jetty Floors And Sea Face Wall At Required Jetties In View Of Regular Vvip Visits At Naval Dockyard, Visakhapatnam Under Ge (I) Dm, Visakhapatnam

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 06-Jul-2022 Corrigendum No 1 Date 19-07-2022
2 11-Jul-2022 Corrigendum No 2 Date 25-07-2022
3 18-Jul-2022 Corrigendum No 03 Date 02-08-2022

Key Value

Document Fees
INR 1000 /-
EMD
INR 156790.0 /-
Tender Value
INR 87.68 Lakhs /-

BOQ Items

Name of Work:PAINTING TO JETTY FLOORS AND SEA FACE WALL AT REQUIRED JETTIES IN VIEW OF REGULAR VVIP VISITS AT NAVAL DOCKYARD, VISAKHAPATNAM UNDER GE (I) DM, VISAKHAPATNAM
Sl. No. Item Description
1Cleaning of oil spilled flooring surfaces of jetties with soap water and fresh water jet pressurized application to get clean surfaces prior to the application of traffic guard renewal coat on the flooring of jetties complete all as specified and directed.
2M&L for 20mm thick cementitious flooring system after application of epoxy based bonding agent on the prepared jetty floor with Nitoflor Levelcrete of Fosroc make having a compressive strength of 40 Mpa. The pre-pack 20Kg Nitoflor Levelcrete bag shall be mixed with 4Ltr of water as per manufactures instructions and thouroughly mixed by mechanical means for application on the floor complete all as specified and directed
3M&L for application renewal coat of two component wearing coat, Trafic guard wearing coarse of Fosroc make, mixed with mechanical mixer and applied on the anti-skid surface by using sponge based epoxy roller and allow it to dry for 16-24 hours complete all as specified and directed
4M&L for application of top wearing coat with the properties of Anti-skid, oil resistant, flexible & UV resistant coating system with the following laying methedology :- a)Application of two component Epoxy primer Notoprime30 of Fosroc make, mixed with mechanical mixer and applied on the level crete surface by using sponge based epoxy roller followed by spinkling of anti-slip grain No 2 of Fosroc make on the primed surface on wet condition for skid resistant and allow it to dry for 16-24 hours. b) Application of two component prepacked proptective system of Trafficguard Intermediate coat of Fosroc make mixed with mechanical mixer and applied on the anti-skid surface by using sponge based epoxy roller and allow it to dry for 16-24 hours. c) Application of two componentwearing coat, Trafficguard Wearing coarse of Fosroc make mixed with mechanical mixer and applied on the anti-skid surface by using sponge based epoxy roller and allow it to dry for 16-24 hours.
5M&L for preparation of existing concrete dock wall surface of dry/ oil/ sea weed growth/ damp by means of mechanical grinding to achieve a rough, coherent substrate having an excellent anchor profile removing all the losse material, rust, dirt etc., clean and dry the surface by using vaccuming equipment, water jet and compressed air. If required surface shall be lightly grit blasting or detergent washed to get PH value neutrality complete all as specified and directed
6M&L for providing two coats of carbonation resistant film chemical "Deck guard S" of M/s FOSROC not less than 150 micron (dry film) per coat over treated area/ plaster including a coat of "Deck guard S primer" of 150 microns complete all as specified and directed
7M&L for complete removal of existing finishes by sand blasting from the steel surfaces of bollard base & head, duct cover and other similar steel surfaces and applying two coats of coal tar epoxy paint over a coat of epilux zince chromate yellow primer and the qouted rate includes writing of numbering the same with orange reflactor paint (100mm to 150mm height) on the painted surface of the bollard complete all as specified and directed
8Dismantling structural steel work of any description including complete all as specified and directed
9S&F for structural steel framed work such as angle, channel, I beams etc cut to shape, including bending and weldings angles as necessary confirmign to Fe-290, Gde E-165 as in supporting structure of duct covers, platforms (0 to -3m level) and capstan (0 to -2m) level) working in a confined area including making good the disturbed portion of concrete surfaces if requitred with 1:1 1/2 : 3 type AO using 12.5mm stone aggregate complete all as specified and directed
10S&F for rolled mild steel plain or chequered plates confirming to Fe-290, Gde E-165 welded, riveted, bolted attachment to supporting structure of capstan, duct covers, valve pit access platform and working in a confined area including making good the disturbed portion of concrete surfaces if required with 1:1 1/2 : 3 type A0 using 12.5mm stone aggregate complete all as specified and directed complete all as specified and directed
11M&L for painting of new/ old steel surface of any description over 10cm width or girth and followed by application of paint scheme. (i) One coat of primer (Dft 1 x 50) epoxy zinc rich primer 50+5 microns (ii)02 coats of Anti corrosive (Dft 2 x 150) (iii)02 coats of coal tar epoxy paint complete
12Demolition of cement concrete of any description not exceeding 15cm thick above or bellow ground floor and removing the debries from the Dockyard premises complete all as specified and directed
13Material & labour RCC M30 grade with approved Ready Mix Concrete/ Design mix (RMC) with graded stone aggregate as in Slabs supported on walls, beams and columns in floors, deck slabs and in shelves and the like (qouted rate inclusive of necessary formwork) complete all as specified and directed
14Periodical maintenance of removing of vegetation growth on the jetties/ wharfs wall with required tools and plants and cleaning and removing the same outside of Naval Dockyard by employing 05 Nos of Mazdoors for 8 hours/ day complete all as specified and directed
15M&L for periodical maintenance of existing (old) stainless steel of post & railing of any size/ any description of hand rails/ ladders etc with emery paper, tack powder, soft cloths etc for cleaning the stain marks/ scaling on the exposed surfaces of SS pipes and buffing with hand machine etc complete all as specified and directed
16[Note : The following items are to be executed in the gallaries of the jetties (restricted work environment) on emergency basis to prevent near miss/ major incidents. The rates quoted shall be considered for all the safety gear, scaffolding, height, lead and lift in all the items.]
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail