}

Provn Of Drain Opposite Helipad Toilet For Recreation Room Overhead Shelter And Provn And Replacement Of Roof Sheet Of Otm Bldg No P34 Under Ge Narangi, narangi-Assam

Military Engineer Services-MES has published Provn Of Drain Opposite Helipad Toilet For Recreation Room Overhead Shelter And Provn And Replacement Of Roof Sheet Of Otm Bldg No P34 Under Ge Narangi. Submission Date for this Tender is 21-07-2022. Drainage Tenders in narangi Assam. Bidders can get complete Tender details and download the document.




Tender Notice

32701061
Corrigendum : Provn Of Drain Opposite Helipad Toilet For Recreation Room Overhead Shelter And Provn And Replacement Of Roof Sheet Of Otm Bldg No P34 Under Ge Narangi
Open Tender
Indian
Assam
narangi
21-07-2022

Tender Details

Provn Of Drain Opposite Helipad Toilet For Recreation Room Overhead Shelter And Provn And Replacement Of Roof Sheet Of Otm Bldg No P34 Under Ge Narangi

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 25-Jun-2022 Other Corrigendum Other 04-07-2022
2 04-Jul-2022 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 11-07-2022
3 09-Jul-2022 Date Corrigendum Date 21-07-2022

Key Value

Document Fees
INR 500 /-
EMD
INR 78800.0 /-
Tender Value
INR 39.40 Lakhs /-

BOQ Items

Name of Work: PROVN OF DRAIN OPPOSITE HELIPAD, TOILET FOR RECREATION ROOM, OVERHEAD SHELTER AND PROVN AND REPLACEMENT OF ROOF SHEET OF OTM BLDG NO. P-34 UNDER GE NARANGI
Sl. No. Item Description
1Excavating in post holes (or similar holes) each not exceeding0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc50m and making good surfaces in soft/loose soil complete all as specified & as directed.
2M&L surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out insoft/loose soil.complete all as specified and directed.
3Excavation in trenches n.exc 1.5m wide and not exceeding 1.5 m in depth for foundation etc, orfor shafts, wells, cess pits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft / loose soil etc complete all as specified and as directed.
4Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each in soft / loose soil etc complete all as specified and as directed.
5Removing of surplus excavated material not exc 50mand depositing where directed at a level n. exc 1.5 m above the starting point etc complete all as specified and as directed.
6M&L for hardcore of broken stoneor boulders of gauge not exceeding 63mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc complete all as specified and as directed.
7M&L PCC (1:2:4) type B-2 (using 40 mm graded stone aggregate) in foundation filliing and mass concrete complete all as specified and as directed.
8M&L PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) in foundation filliing and mass concrete complete all as specified and as directed.
9M&L PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) in foundation filliing and mass concrete complete all as specified and as directed.
10M&L for RCC 1:2:4 type B1 (20mm graded stone aggregate) nominal mix as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete etc complete all as directed.
11M&L for RCC 1:2:4 type B1 (20mm graded stone aggregate) nominal mix as in beams, seismic bands, cantilevers, bressumers and lintels complete all as specified as directed.
12M&L for RCC 1:2:4 type B1 (20mm graded stone aggregate) nominal mix as in Columns, pillars, piers, posts and struts etc.complete all as specified as directed.
13M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching including necessary formwork and finishing of exposed surfacs of concrete etc complete all as specified and as directed.
14M&L for RCC 1:2:4 type B1(20mm graded stone aggregate) nominal mix as in Slabs supported on walls beams and columns in floors,roofs,landings, balconies,canopies,deck slabs and in shelves and the like etc complete all as specified as directed.
15M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified as directed.
16M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n. exc 200m thick (Horizontal or sloping) complete all as specified as directed.
17M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified as directed.
18Formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified as directed.
19M&L for brick work with old size sub class "B" bricks straight or curved on plan exc. 6m mean radius and built in CM 1:6 etc complete all as specified as directed.
20M&L for brick work with old size sub class "B" bricks straight or curved on plan exc. 6m mean radius and built in CM 1:4 etc complete all as specified as directed.
21S&Fsteel window andventilator fixed type complete with glazing barsdovetailed or welded ready for fixing of wire mesh/ glass panes.
22S&F 30 mm thick Factory Made Solid Panel PVC Door Shutter consisting of frame made out of M.S. tubes of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet 5mm thick‘C’ channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and plain colour PVC sheets for top rail, lock rail & bottom rail on either side, and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s instructions and drawing. The width of stiles & rails will be in proportion to the width of the door shutter as per SSR Clause No 8B.2.1
23M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing etc complete all as directed.
24S&F 150 mm size aluminum anodised, barrel tower bolts of extruded section etc complete all as directed.
25S & F 75mm size stainless steel butt hinges, medium weight, and fixed etc complete all as directed.
26S&F 150 mm long extruded anodized aluminum alloy handles, febricated type,etc complete and directed.
27S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as directed.
28Dismantling of asbestos cement sheet (corrugated or semi corrugated etc) as in roof covering complete all as specified and as directed.
29M&L Pre- paintedhot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screwscomplete all as specified and directed.
30M&L Pre- paintedhot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specifiedcomplete all as specified and directed. Note:To be executed for provision of ridges and hips.
31Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
32M&L TMTsteel bars 8mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
33M&L for mild steel TMT bars 5 mm dia and over upto and including 10mm diacut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia as in stirrups, spacers and binders complete all as specified and as directed.
34S&F Rolled mld steel roof trusses ( framed) trussed purlins, crane gantries, rails and fastenings and heavy brackets framing ( Beam, tee, angle, channel or flat section) including distace pieces, cleats etcconfirming to Fe 410-W ( Gde E-250 Quality A)complete all as specified & as directed.
35S&F rolled mild steel plates ( plain or chequrred) channels, square cut or notched ( ordinary or counter sunk)forming holes, without any attachmentconfirming to Fe-410-W (Gde-E-250) quality Acomplete all as specified & as directed.
36S&Fmild steelworks as in framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gussetplates, riveting, etc not exceeding 10 Kg each brackets, conforming to Fe-290 Gde E-165complete all as specified & as directed.
37M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.50mm graded stone aggregate) as in floorcomplete all as directed.
38M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor finished even and smooth using extra cement mixed with concrete colour pigmentcomplete all as directed.
39M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in subase finished to receive floor treatment etc complete all as directed.
40M & L for 100 mm thick PCC 1:2:4, type B2 (using 40 mm graded stone aggregates)as in path / paving / hard standing / floor and finished the surface even and smooth without using extra cement complete all as specified and asdirected.
41M&L for 75 mm thick, PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in plinth protection, etc finished the surface even and smoothwithout using extra cement including provision of joint of size 10 mm wide and 30 mm deep at every 2.4 mtrs interval filled with bitumastic compound etc complete all as specified and as direted.
42M & L for coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
43M & L for glazed ceramic coloured tiles 375x250x7mm/300x200x7mmthick, set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps etc over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.
44M & L pre-polished cement concrete chequered tiles area of each tiles exc 0.06 Sqm butn exc 0.11 Sqm and 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:6)complete all as specified and directed.
45M&L for 15 mm thick rendering in CM 1:4 on brick/ concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
46M&L for 15 mm thick rendering in CM 1:6 on brick/ concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
47M&L for 5mm thick rendering in CM 1:3 on concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified and as directed.
48Supply only integral water proofing compound complete all as specified and as directed.
49M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.
50M&L for preparation of newly plastered surface of wall and applying three coats of white wash on wall surface complete all as specified and directed.
51M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash on wall surface complete all as specified and directed.
52M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed.
53M&L for preparation of new steel or iron surfaces of any description not exceeding 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed.
54S&F 4mm thick sheet glass, frosted on both sides and glazing with oil putty in square not exceeding0.50sqm ineach pane complete all as specified and directed.
55S&F Cast iron floor trap 100mm dia outlet with grating including jointing to waste pipe fixed in cement concrete type B-I ( 1:2:4) complete all as specified & as directed
56S&F GI tubing15 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
57S&F GI tubing 20 mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.
58S&F 15mm dia Bib taps quarter turn cast copper alloy chromium plated, with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and directed.
59S&Fstop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.
60S&F 15mm bore pillar taps quarter turn cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered "HOT" or "COLD" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.
61S&F 15mm bore dia of concealed stop valves cast copper alloy fancy type chromium plated with long shank and cupcomplete all as specified and as directed.
62S&F rotational moulded polyethylene water storage tank 500 litre capacity of triple layered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrulecomplete all as specified and directed.
63S&FBrass chromium plated 600mm long Towel Rail fixed with screws and wooden/plastic cleats etc. complete all as specified and directed.
64S&F glass shelf of size 450mmX150mm with chromium plated guard rail below mirror for keeping soap box complete all as specified and as directed.
65S&F Vitreous china urinal, half stall white (excluding flushing cisterrn) including urinal spreader, PVC connection, 40mm PVC waste pipe & 40mm waste coupling providing and fixing plugs, bedding urinal against wall in mortar 1:2, securing urinal to plug, with and including 60mm long screws, pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe complete all as specified and directed.
66S&F 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring jointslaid in trenches or in floorscomplete all as specified and directed.
67S&F 110 mm dia PVC (SWR) bends of any radius complete all as specified and directed.
68M&L for PVC (SWR) vent Cowl, 110 mm dia complete all as specified and as directed.
69S&F viterous china squatting panOrissa pattern size 580 x 440mm white with integral foot rest, but excludingflushing cistern but including"P" or "S" trap andprovision of lime concrete bedding complete all as specified and directed.
70S&Fvitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.
71S & F , health faucet ABS with 1.2m SS flexible tube and ABS wall hook fixed with necessary fixers complete all as specified and as directed.
72M/L PCC 1:3:6 type C-2 ( 40mm graded aggregate) as in concrete bed to drain pipe 110/150 mm dia including packing under , and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
73S&F vitreous china wash basinwhite/coloured flat back size 550 mm x 400mm including all fittings including cutting for and pinning in ends of brackets or erecting stand etc complete (waste coupling 32mm bore CP, 32mm bore PVC waste pipe, cast iron brackets etc shall be deemed to be included in the quoted rate) complete all as specified and directed.
74S&F PVC low level flushing cistern 10 litres capacity with inlet ball valve, float and handles including brackets complete all as specified and directed.
75S&F600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as directed.
76M&L for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathedFRLS cable, 1100 volts grade IS-694marked, with multistranded copper conductors and earthcontinuity wire with 1.5 Sqmm cable (including connecting to earth dolly)laid/fixed in and including concealed in PVC rigid conduit on walls/ceiling, and also including sunk type pressed steel terminal box made out of galvanised iron sheet thickness not less than 1mm and 3 mm thick plastic laminated sheet top covers for one light/fan/exhaust fan point controlled by one number one way 5 Amp switch complete all as specified and as directed.
77All as per item serial No 76 here-in-before but One 3 pin socket outlet 5 amps on the same board with other switches
78S&F switch piano, flush type single pole one way 5 Amps 230 volt complete all as directed.
79S&F socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as directed.
80S&F ceiling rose surface bakelite 65x50mm three terminal complete all as directed.
81S&F lamp holder insulated PVC/ Polycarbonate/ bakelite body, with back plate suitable for batten fitting or PVC round or squre box, complete all as directed.
82S&F Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagonal bulk head black-lit LED10 W -IP-66 luminaire comprising of high brightness LEDs complete all as specified and as directed. Make:- HavellsModel HEXAFT10WLED857SSYMBOPC or equivalent Model of make : Philips /Crompton /GE.
83S&FLED light fitting of approved make1X 20 W, 220V, AC decorative box type with driver, holder including LED lamp and connecting up with three core flexible copper conductor cable of suitable size complete all as directed.
84S&F LED street light fittings of approved make 35 W 230 V AC outdoor type with high pressure diecast aluminium housing and heat resistant complete with driver, lamp,with impact and corrosion resistantincluding thermal management in multiple optics complete wit IP 65/66 protectioncomplete all as directed.
85S & FSPN DBs 8 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar complete all as specified and as directed. Make :- Legrand Cat No 5076 11 or equivalent model in Siemens / Schneider
86S&F MCBs, SP 6 to 32 Amps, 10 KA, "C" curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed. Make :-Legrand Model 4085 90 to 95 orequivalent model in Siemens / Schneider/L&T
87S&F of Exhaust fans AC single phase 230/ 240 V ,50 Hz metallic heavy body of size 300 mm sweep, 1400 RPMwith louver fixing with 4 no hold fastener nut and bolt with washer and connecting with flexiable PVC insulated multistranded copper conductor cable of size 1.5 sqmm including civil work opening on wall and making good surface complete all asspecified and directed. (Make-USHA / Havells/Bajaj /Crompton)
88S&F MCBs, SPN32 Amps, 10 KA,"C" curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed. Make :- Legrand Model 4086 09 to 17 or equivalent model in Siemens / Schneider/L&T
89M&L in repair building secruity light bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed.
90Supply, laying and testing of XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 10 sqmm 2 core laid in trenches / floor or fixed on wall /pole with brass compression cable glands, terminal lugs etc, complete all as specified and as directed.
91Supply and spreading fine dry river sand for cushing to UG cable including spreading levelling and hand punning etc complete all as specified and directed.
92M&L for sub class "B" old size bricks laid in trenches for cable protection laid flat width wise along the length of cable complete all as specified and directed.
93Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm burieddirectly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etcRCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate)including earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 .
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail