}

Supply And Fixing Of Outdoor Gym Equipment Etc. In Cantt. Area. Supply And Fixing Of Outdoor Gym Equipment Etc. In Cantt. Area., kanpur-Uttar Pradesh

Directorate General Defence Estates has published Supply And Fixing Of Outdoor Gym Equipment Etc. In Cantt. Area. Supply And Fixing Of Outdoor Gym Equipment Etc. In Cantt. Area.. Submission Date for this Tender is 07-07-2022. Gym Equipment Tenders in kanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

32681454
Supply And Fixing Of Outdoor Gym Equipment Etc. In Cantt. Area. Supply And Fixing Of Outdoor Gym Equipment Etc. In Cantt. Area.
Open Tender
Indian
Uttar Pradesh
kanpur
07-07-2022

Tender Details

Supply And Fixing Of Outdoor Gym Equipment Etc. In Cantt. Area. Supply And Fixing Of Outdoor Gym Equipment Etc. In Cantt. Area.

Key Value

Document Fees
INR 1500 /-
EMD
INR 96000.0 /-
Tender Value
INR 48 Lakhs /-

BOQ Items

Name of Work:Supply and fixing of outdoor gym equipment etc. in cantt area
Sl. No. Item Description
1SEATING & STANDING TWISTER • DIMENSIONS: - 1700mm (Length) x 540mm (Width) x 1250mm. (Height). • SAFE AREA: - 3 Mtr x 1Mtr. • Seating & Standing Twister equipment made from “B” Class G.I. pipe of different NB.NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The Center Pipe is of 100mm NB made from “B” Class G.I. Round Pipe. • The M.S. round plate of Ø250mm X 10mm thickness is welded at bottom. • Handle and Bottom sleeve pipe of 125mm OD with thickness 5mm provided for easy assembly, replacement and maintenance. • The bottom frame of the Seating & Standing twister is of 32 NB, 50 NB, and 25 NB made from “B” class G.I. pipe. • The handle frame of Seating & Standing twister is 25 NB & Foot resting frame of seating side is made from “B” class G.I. pipe of 25mm NB. •The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class, Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRCA square pipes of 3mm thickness. • The Twister plate fitted on the bottom frame is made up of Injection Moulded PlasticLLDPE / HDPE and Mounted on M.S. Round Plate of size Ø300x10mm Thick. • Closing Caps are made up of Injection Moulded Plastic LLDPE / HDPE. • The Pins used are made up of Ø 35 mm SAE 8620 bright material. • The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts & bolts are used for assembly. • The powder coating is done by Pure Polyester powder of Berger Paint with 60 to 70 micron thickness.
2SKY WALKER • DIMENSIONS: - 1720mm (Length) x 630mm (Width) x 1750mm.(Height) • SAFE AREA: - 2.7Mtr x 1.6Mtr. • Sky Walker Equipment made from “B” class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The main frame pipe is of 80mm NB made from “B” Class G.I. Material which is bend at the radius of 250mm. • The leg movement frame is of 50 x 50mm x 3mm thick CRC square pipe. •Sleeves are made up of 100 mm OD M.S. pipe with thickness 5mm. This results in easyreplacement of bearings, pins and handle. • The handle frame is of 25mm NB made from “B” Class G.I. pipe. •The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class.Welded with M.S. round plate of Ø250 mm & 10mm thick.Main pipe supportedwith 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Two foundations are provided for rigid support. • The footrests made from Injection Moulded Plastic LLDPE / HDPE. • Closing Caps are made up of Injection Moulded Plastic LLDPE / HDPE. • The pins used are made up of Ø 25mm SAE8620 bright material. Pins are fixed at the outerend with M8 grub screws and Dia.8mm SS ball. • The bearings used are “6205zz” are permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts & bolts are used for assembly. • The cerclips used for assembly are of A24 type. • The powder coating is done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness.
3QUAD SPINNER Quad spinner ( Four Wheeler) Equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. • The center pipe is of 100NB made up of “B” Class G.I. pipe •The bottom welded with support of M.S. round plate of Ø250 mm & 10mm thickness. • The handle movement frame is of 25mm NB made from “B” Class G.I. pipe. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • Foundation cover Closing Cap is made from Injection Moulded Plastic LLDPE / HDPE.• Closing Caps are made up of Injection Moulded Plastic LLDPE / HDPE. • The pins used are made up of Ø 25 mm of SAE 8620 bright material. •The bearing used is “6201zz” & “6205zz” permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nut bolts are used for assembly. • The cerclips used for assembly is of A 24. • The nylon bush is used for handle knob. • The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness.
4BACK EXTENSION • Length:- 1150mm • Width:- 550mm • Height:- 820mm • Safe Play Area:- 2.4 Mtr X 1.7 Mtr • Back Extension Equipmentmade from “B” G.I. Pipe of different NB.pipe. (NB stands forNominal Bore i.e. Internal Diameter of pipe in mm). • 50mm NB:- Main frame. • 32mm NB:- Footrest support frame, Foundation hole-pass. • 25mm NB:- Handle frame. • MS Angle 23 x 23 x 1.8mm:- Foundation support frame. • MS sheet of size 330 x 330 x 1.8mm:- Seat. • MS plate of 245 x 113 x 2.8mm :- Footrest support plate. • Nut & Bolts:- High tensile steel with galvanised nut & bolts are used. • HDPE / LLDPE Plastic :- Footrest. • Handle grips:- Handle grips are made up of high quality rubber material. • Powder coating:- The powder coating done with Pure polyster powder of Ackzonoble or Berger with 60 to 70 micron thickness
5CHEST PRESS CUM SEATED PULLE • DIMENSIONS: - 2000mm (Length) x 710mm (Width) x 2200mm. (Height). • SAFE AREA: - 3.0Mtr x 1.7Mtr. • Chest press cum seated puller equipment made up of “B” Class G.I. pipe of different NB.NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The center pipe is of 100NB made up of “B” Class G.I. pipe. • The bottom welded with support of M.S. round plate of Ø250 mm & 10mm thickness. • The connecting pipes are made up from 25NB “B” class G.I. pipe. • The handle frame is made up from 32NB “B” class G.I. pipe. • To build structure bushes are used which are made from seamless pipe of 50mm O.D. and6mm thickness as well as 50mm diameter solid bar is used. •The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. • Closing Caps are made up of Injection Moulded Plastic LLDPE / HDPE. • Foundation cover Cap is made from Injection Moulded Plastic LLDPE /HDPE. • Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material. • The bearings used are of “6205zz” & “6203zz” permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts & bolts are used for assembly. • The cerclips used for locking is made up of A24 & A16 • The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness.
6LEG PRESS • DIMENSIONS: - 1840mm (Length) x 360mm (Width) x 1560mm. (Height). • SAFE AREA:- 2.8 x 1.4Mtr. • Leg Press equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The center pipe is of 100mm NB made from “B” Class G.I. pipe. • The Sleeve frame is of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve can be disassembled from main frame. •The bottom support of M.S. round plate of Ø250 mm & 10mm thick. •The remaining outer frame is of 32NB made from “B” class G.I. pipe. • The foundation used for fixing is structure and made from center pipe of G.I. of 80mm . NB “B” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angle of 3 mm thickness and 20mm x 40mm CRC.square pipe of 3mm thickness. • The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. •The footrests are made from Injection Moulded Plastic LLDPE / HDPE with the support of 310mm X 130mm X 3mm thick MS plate. •The frame of footrests made up of 25 NB “B” class G.I. pipe. •Closing Caps are made up of Injection Moulded Plastic LLDPE / HDPE. • To build structure bushes are used which are made from M.S. seamless pipe of 50mm OD and 5mm thickness. • The pins used are made up of Ø25 mm SAE 8620 bright material. •The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed Brand. • High tensile steel with galvanized nut bolts are used for assembly. • Foundation Cover Closing Cap is made from Injection Moulded Plastic LLDPE / HDPE. • The cerclips used for assembly are of A24 mm. • The powder coating done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness.
7SHOULDER BUILDE • DIMENSIONS: - 900mm (Length) x 900mm (Width) x 1580mm (Height). • Safe Area:- 1.9Mtr X 1.9Mtr • Shoulder Builder Equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters •The Center Pipe is of 100mmNB made from “B” Class G.I. pipe, and the bottom support of M.S. Round plate of 250 mm diameter & 10mm thickness. • Sleeve provided of M.S. seamless pipe of Outer diameter 125mm with thickness 5mm provided. • The handle movement frame is of 25mm NB made from “B”Class G.I. pipe. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80mm NB “B” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with . 25 mm X 25mm M.S. angle of 3 mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness. • Closing Caps are made up of Injection Moulded Plastic LLDPE / HDPE. • The pins used are made up of Ø 25 mm of SAE8620 bright material. •The bearing used is “6201zz” & “6205zz” permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nut bolts are used for assembly. • The cerclips used for assembly is of A 24. • The nylon bush is used for handle knob. •The powder coating done with Pure Polyester powder of Ackzonoble or Berger Paints with 60 to70 micron thick. • foundation Cover Closing Cap is made from Injection Moulded Plastic LLDPE / HDPE
8SURF BOARD • DIMENSIONS: - 910mm (Length) x 860mm (Width) x 1400mm.(Height). • Safe Area:-1.39 x 1.27Mtr. • Surf Board Equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The center pipe is of 100mm NB made from “B” class G.I. pipe. • The sleeve pipe is of 125mm OD seamless pipe with thickness of 5mm and bolted to main frame with M10 SS bolts. • The bottom support welded of M.S. plate of Ø 250 mm & 10mm thickness. • The handle frame is of25NB made from “B” class G.I. pipe. • The paddleframe is of50NB made from “B” class G.I. pipe is supported with 70X8 mm bend M.S. flat and can be replaceable. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80NB “B” classwelded with M.S. round plate of Ø250 mm & 10mm thick.Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • Bushes are used 70mm Outer Diameter with 5mm thickness is used. • The footrests made from Injection Moulded Plastic LLDPE / HDPE. • For support to footrest 200mmX250mm with 3mm thickness M.S. Plate used. • Closing Caps are made up of Injection Moulded Plastic LLDPE / HDPE. • The pins used are made up of Ø35 mm SAE 8620 bright material. • The bearing used are of “6007zz” permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nut bolts are used for assembly. • The cerclips used for assembly is of A34. • The powder coating is done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness.
9SIT UP BOARD •DIMENSIONS: - 1820mm (Length) x 430mm (Width) x 580mm (Height). •Safe Area:- 2.8Mtr x 0.6Mtr. • Sit up Board Equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The main frame is of 50mm NB made from “B” Class G.I. pipe supported with the MS round plate of Ø 250x10mm thickness. • Fiber reinforced Plastic sheet of 3mm thickness is Bounded on 25mm NB (G.I.) “B” class pipe of main frame. • The base support of the sit up board is made 40NB (G.I.) “B” class pipe. •The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipesupported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • The powder coating is done with Pure Polyester powder Ackzonoble or Berger Paints with 60 to 70 micron thickness.
10HORSE RIDER • DIMENSIONS: - 1180mm (Length) x 400mm (Width) x 1400mm. (Height). • SAFE AREA: - 2.2Mtr x 1.4Mtr. • Horse rider equipment made from “B” class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The main frame of 100NB made from “B” Class G.I. pipes welded with M.S. round plate of Ø250 mm & 10mm thick • The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. • Foundation Cover Closing Cap is made from Injection Moulded Plastic LLDPE / HDPE. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25x 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • The leg movement frame is of 32NB made from “B” G.I. pipe. • The handle frame is of 32 NB made from “B” Class G.I. pipe. • The footrests are made from 25 NB “B” class G.I. pipe. • Pins used of Diameter 17 mm are made up from SAE 8620 bright material. • The bearings used are “6203zz” permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts & bolts are used for assembly. • The circlips used for assembly are of A24 mm. • The powder coating done with Pure Polyester powders of Ackzonoble or Berger with 60 to 70 micron thickness.
11LEG EXTENSION • Length:- 1000mm • Width:- 680mm • Height:- 1600mm • Safe Area:- 2.0 Mtr X 1.4 Mtr • Leg Extension made up of “C” class GI pipe of different NB. NB stands for Nominal Bore size i.e. Internal Diameter of pipe in millimeters. • 100mm NB:- Centre Pipe. • 80mm NB:- Foundation main pipe. • 32mm NB:- Pedal link. • 25mm NB:- Handle frame duly bend, Footrest. • MS Angle 23 x 23 x 1.8mm:- Foundation support frame. • MS pipe 19 x 38 x 1.8mm:- Foundation support frame. • F50mm seamless pipe:- Bushes. • MS sheet of size 330 x 330 x 1.8mm:- Seat and Backrest. • MS bright material:- Pins made of Dia.17mm. • Bearings:- Permanent lubricated bearings “6203” of reputed brand are used. • Bearings End cap:- Made up from SS304/Nylon material. • HDPE / LLDPE material:-Base cover. • Nut & Bolts:- High tensile steel with galvanised nut & bolts are used. • Circlips:- The circlips are used for locking is made up of A16. • Powder coating:-The powder coating done with Pure polyster powder of Ackzonoble or Berger with 60 to 70 micron thickness.
12CYCLE • DIMENSIONS: - 1570mm (Length) x 570mm (Width) x 900mm. (Height). • SAFE AREA: - 2.5Mtr x 1.5Mtr. • Cycle equipment made from “B” class G.I. Pipe of different NB. (NB stands for Nominal BoreSizes i.e. Internal Diameter of pipe in millimeters) • The main frame of 50 NB made from “B” Class G.I. pipes. • M.S. round plate of Ø300 mm & 10mm thickness used to form a paddle assembly. • The handle frame is of 25NB made from “B” Class G.I. pipe. • The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet ofsize 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. •The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB“B” classwelded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25x25mm M.S. angles of3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • Closing Caps are made up of Injection Moulded Plastic LLDPE / HDPE. • Pins used of Diameter 25mm are made up from SAE 8620 bright material. • Pins used of Diameter 13mm are made up from EN8 material with CRCA pipe 20X20mm of thickness 3.00mm for paddle assembly. • The bearings used are 6001zz & 6205zz permanent lubricated sealed bearing of reputed brand. •High tensile steel with galvanized nuts and bolts are used for assembly. • The circlip used for assembly are of A24 type. •The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness.
13PECK DECK • Length:- 2000mm • Width:- 710mm • Height:- 2000mm • Safe Area:- 3.0 Mtr X 1.7 Mtr • Peck Deck equipment made up of “B” class GI pipe of different NB. NB stands for Nominal Bore size i.e. Internal Diameter of pipe in millimeters. • 100mm NB:- Centre pipe. • 80mm NB:- Foundation main pipe. • 32mm NB:- Handle frame, Seat frame, support. • 25mm NB:- Connecting links, handle. • 15mm NB:- Peck Deck small links. • MS Angle 23 x 23 x 1.8mm:- Foundation support frame. • MS pipe 19 x 38 x 1.8mm:- Foundation support frame. • MS plate of 8mm:- Pec Deck profile. • F50mm seamless pipe:- Bushes. • F60mm seamless pipe:- Bushes. • MS sheet of size 330 x 330 x 1.8mm:- Seat and Backrest. • HDPE / LLDPE Plastic:- Closing caps, Base Cover. • MS bright material:- Pins made of Dia.25mm & Dia.17mm. • Bearings:- Permanent lubricated bearings “6203” of reputed brand are used. • Bearings End cap:- Made up from SS304/Nylon material. • Nut & Bolts:- High tensile steel with galvanised nut & bolts are used. • Circlips:- The circlips are used for locking is made up of A24 & A16. • Powder coating:-The powder coating done with Pure polyster powder of Ackzonoble or Berger with 60 to 70 micron thickness.
14Push Up Bar • Length:- 1220mm • Width:- 550mm • Height:- 1700mm • Safe Area:- 2.0 Mtr X 1.0 Mtr • Push up bar equipment made up of “B” class GI pipe of different NB. NB stands for Nominal Bore size i.e. Internal Diameter of pipe in millimeters. • 100mm NB:- Centre pipe. • 80mm NB:- Foundation main pipe. • 32mm NB:- Handle frame pipe, support. • MS Angle 23 x 23 x 1.8mm:- Foundation support frame. • MS pipe 19 x 38 x 1.8mm:- Foundation support frame. • HDPE / LLDPE Plastic:- Closing caps, Base Cover. • Nut & Bolts:- High tensile steel with galvanised nut & bolts are used. • Powder coating:-The powder coating done with Pure polyster powder of Ackzonoble or Berger with 60 to 70 micron thickness.
15UNEVEN BAR • Length:- 3200mm • Width:- 500mm • Height:- 2200mm • Safe Area:- 5.4 Mtr x 5.2 Mtr. • Uneven bar equipment made up of “B” class GI pipe of different NB. NB stands for Nominal Bore size i.e. Internal Diameter of pipe in millimeters. • 80mm NB:- Main frame duly bend, Foundation main pipe. • 32mm NB:- Horizontal link, Handle frame duly bend. • 25mm NB:- Handle frame duly bend. • MS Angle 23 x 23 x 1.8mm:- Foundation support frame. • MS pipe 19 x 38 x 1.8mm:- Foundation support frame. • HDPE / LLDPE Plastic:- Closing caps. • Nut & Bolts:- High tensile steel with galvanised nut & bolts are used. • Powder coating:-The powder coating done with Pure polyster powder of Ackzonoble or Berger with 60 to 70 micron thickness.
16THI-CHI SPINNER (2 WHEEL) • DIMENSIONS: - 700mm (Length) x 1000mm (Width) x 1280mm (Height). • Safe Area:- 1.9Mtr X 1.9Mtr •Thai chi spinner Equipment made up of “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. • The center pipe is of 100NB made up of “B” Class G.I. pipe. •The handle movement round frame is made up from 25 NB “B” class G.I. pipe • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC squarepipes of 3mm thickness. • Closing Caps are made up of Injection Moulded Plastic LLDPE / HDPE. • The pins used are made up of Ø 25 mm of SAE8620 bright material. •The bearing used is “6201zz” & “6205zz” permanent lubricated seale bearing ofreputed brand. • High tensile S.S. nut bolts are used for assembly. • Foundation cover Closing Cap is made from Injection Moulded Plastic LLDPE / HDPE. • The cerclips used for assembly is of A24 and A11. • The nylon bush is used for handle knob. •The powder coating done with pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness. •Bolt M8X16 mm and Nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust.Ackzonoble or Berger Paints with 60 to 70 micron thickness.
17BENCH WITH FIXED DUMBELL *PRODUCT DIMENSIONS: - 2350mm (Length) x660 mm (Width) x600 mm (Height). *SAFE WORKOUT AREA: - 3500mm (Length) x 2000 mm (Width). • Bench with fixed dumbell equipment made up of “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The main frame having pipe 50 mm NB made up of “B” Class G.I. pipe. • The middle connecting pipes are made up from 40mm x 20mm rectangular MS pipe. • The handle frame is made up from 32NB “B” class G.I. pipe. • To build structure bushes are used which are made from seamless pipe of 50mm O.D. and6mm thickness as well as 25mm outer diameter solid bar is used. • The structure having hole pass provision for foundation • Weight plates are made from iron casting material which is permanently attached with 25mm MS solid bar. • Shaft used of Diameter 25mm made up from SAE 8620 bright material. • The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed brand. • The cerclips used for locking is made up of Ø25 mm. • The powder coating is done by Pure Polyester powder with 60 to 70 micronthickness.
18AIR WALKER • Length:- 1200mm • Width:- 400mm • Height:- 1290mm • Safe Play Area:- 2.0 Mtr X 1.8 Mtr • Air Walker equipment made up of “B” class GI pipe of different NB. NB stands for Nominal Bore size i.e. Internal Diameter of pipe in millimeters. • 80mm NB:- Air Walker Prime Stand duly bend, Foundation center pipe. • 32mm NB:- Air Walker pedal frame, • 25mm NB:- Air Walker handle frame. • MS pipe 48 x 48 x 2.8mm:- Footrest frame support. • MS Angle 23 x 23 x 1.8mm:- Foundation support frame. • MS Flat 48 x 9mm:- Foundation plate support. • MS plate of 245 x 113 x 2.8mm :- Footrest support plate. • MS bright material:- Pins made of Dia.25mm. • MS plate of 8mm:- Air Walker Pedal L-bend, support. • F60mm seamless pipe:- Bushes. • Bearings:- Permanent lubricated bearings “6205” of reputed brand are used. • Nut & Bolts:- High tensile steel with galvanized nut & bolts are used. • Circlips:- The circlips are used for locking is made up of A24. • SS 304 material:- Bearing end caps, top cap. • Aluminum material:-Air Walker Footrest. • Powder coating:- The powder coating done with Pure polyster powder of Ackzonoble or Berger with 60 to 70 micron thickness..
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail