}

Construction Of 200 Kl Capacity Stp For Sewerage Sludge Water Harvesting For 1 Year Maintenance., agra-Uttar Pradesh

Agra Development Authority has published Construction Of 200 Kl Capacity Stp For Sewerage Sludge Water Harvesting For 1 Year Maintenance.. Submission Date for this Tender is 02-06-2022. Sewage Treatment Plant Tenders in agra Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

32432465
Construction Of 200 Kl Capacity Stp For Sewerage Sludge Water Harvesting For 1 Year Maintenance.
Open Tender
Indian
Uttar Pradesh
agra
02-06-2022

Tender Details

Construction Of 200 Kl Capacity Stp For Sewerage Sludge Water Harvesting For 1 Year Maintenance.

Key Value

Document Fees
INR 2800 /-
EMD
INR 166000.0 /-
Tender Value
INR 82.95 Lakhs /-

BOQ Items

Name of Work: Rajrai road ke pas ishtith nalanda town colony se nikalne wale sewerage sludge mishrit jal ke nistaran hetu 200 KL chhamta ke STP ka nirman karya (Civil karya, Elctro Mechanical Upkaran Ishtapna ka karya evam STP se Nikalne wale treated water ko Gardening mein upyog karne ka karya ek varsh ke anurakchan lahit MBBR Techonology par Aadharith)
Sl. No. Item Description
1PART-A (CIVIl WORK) :- Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soilSI.No- 2.8.1 ( DSR- 2018)
2Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. (DSR No. 2.26 year 2018)
3Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.SI.No- 2.2.5 ( DSR- 2018)
4Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) SI.No- 4.8.1 ( DSR- 2018)
5Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but including the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level (DSR- 2018 )
6Mild steel or iron work in plain work such as reinforced concrete or reinforced brick work (When not included in and an over all rates) brought to required shape as necessary including bending for proper completion of the work and including the supply of steel and its wastage Bend, hooks and authorized over lapping shall be measured upto floor to level.10 - 32 mm dia
715 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
8Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached plasters, butteresses, plinth and string courses etc.
9Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick
10Water Proofing of STP Tank Providing and applying a two component polymer based cementitious waterproofing systen in following sequence:
11Treatment from the internal surface: Cleaning the internal surface areas thorougly so that they are free of all contaminants like dirt & laitance & to remove all the loose materialsby various mechanical means. Providing & grouting at construction joints cementite us grout into each nozzles(1 mtr c/c) at regular intervalsas per the requirements. Providing & making filters of 75mmx75mm at the junction of the walls and the slabs using cement mortar of 1:4 mix admixed with 5% of SBR latex weight by cement. Applying three coats of two component,prepacked ,polymer modified cementiteous coatning with eleongation of 120% as per ASTM D412 and tensile sterngth of 5N/mm2 @3kg/sqmtr all over the slab including the angular fillets and extendable over the over the vertical wall .Finally sprinkling sand over the third coat for better adhesion with plaster. The interval between each coat of coating application is 6-8 hrs. Providing & laying protection layer of 25 mm thick cement mortor admixed with with integral waterproofing compound.Note:cement and sand shall be provided by client free of cost at site.
12Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
13Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
14Supplying and fixing rolling shutters of approved make, made of 80x125mm (3" x 18 gauge) cold rolled MS Lath inter locked through their entire length joined together at the end by lock and mounted on specially designed pipe shafts with brackets, sides guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and spring.
15Providing and fixing 27.5 cm long wire spring grade 2 for rolling shutters.
16Providing and fixing top cover for rolling shutters made of 18 gauge M.S. sheet.
17Providing and fixing ball bearing for rolling shutters.
18Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm.
19Add for using extra cement in the items of design mix over and above the specified cement content therein. (Item 5.35 year 2016 DSR)
20PART-B (ELECTRO MACHANICAL WORK) :- Bar Screen: - Supplying, Installing, testing and commissioning of SS 304 Pre fabricated Bar Screenshall be provided in Bar Screen Chamber works, so as to exclude the large sized particles with associated set of guide angles in SS flat of 10mm screen kept inclined at 45 degree to the horizontal at 40 mm c/c with one on.
21Sewage pump: supply, installation, testing and commissioning of non clogging submersible pump type kirloskar pump (2 nos - one working & one standby) to pump 200 KLD sewage from EQT to aeration tank at uniform flow rate with motor of following capacity delivery header with isolation valve, pressure gauge on delivery line with isolation cock level controller with wiring to control the level of tank Automatically. Pump shall have following duty etc as required for expansion. Solid handling cap. 15 to20mm ; flow rate – 12 m3/ hr each ; head -10-12 mt ,make (kirloskar)/
22Sludge Pump:supply , installation ,testingand commissioning of non clogging mono block centrifugal sludge transfer pump (2 nos1 working & 1 standby)to transfer sludge from tube settler to fabreactor for seeding only and balance to sludge holding tank and filter press for complete with all accessories motor of following capacity delivery header with isolation valve , pressure gauge on delivery line with isolation cock level controllerwith wiring to control the level of sump automatically . pump shall have following duty etc as required ( Make Kirloskar / equivalent) Solid handling cap . 10mm, Flow rate- 2.5 m3/hr each, head – 12-14 m
23Filter Feed Pump: Supply, installation, Testing & commissioning of Filter feed pump (2 No’s, 1- working, 1- standby) consisting of centrifuge non submersible type, to feed tertiarytreatment process through multi-gradefilter, activated carbon filter followed by Chlorinationsystem. The pump shall be coupled to the adequate HP electrical motor mounted on common base frame. The pump shall be suitable for following requirement: (Make: Kirloskar/ Crompton/equivalent Centrifugal pump of 12 m3/Hr head 30 meter )
24Coarse Aeration Grid: Supply and fixing of lateral & header type stainless steel 304 (SS) Air grid and coarse bubble diffuser providein Equalization tank and sludge holding tank for supply of designed air to keep suspended solid in suspension / homogeneous odorless state and avoid septic condition.
25Fine Aeration Grid: Supplying and fixing of Lateral & header type SS 304 Air grid and fine bubble diffuser provide in MBBR tank1&2.
26Air Blowers:- Supplying, installing, testing and commissioning ofTwin Lobe design type air blower complete with motors, pulleys, rigid one piece CI casing and side plates, silencer, base plate, anti-friction bearings, rotary oil sealing havinghorizontal configuration. Cap.250 m3/hrpressure : 0.5kg/cm2 make :EverestBeeta/water 2 people Dry run protection.
27MBBR Media :- Supply, installation, testing & commissioning of FAB reactor media with having surface area of 300-400 m2/m3, length: 16 mm, Dia.: 22mm; Shape: Cylindrical, Type: semi clog, density gm/cc: 0.93-0.96 complete in all respect.
28Tube Settler Media :-Supply , installation ,testing & commissioning ofPVC Tube Dee Media with hexagonal chevron shape laid at 60 degreeslope with a settling area of 6.25 m2 per cum in tongue & groove fittingarrangement for separation of bio-solids & supernatant liquid
29CHLORINE DOSER:- Supply, installation, testing and commissioning of on line automatic electronic sodium hypo dosing unit with automatically operated dosing pump comprises of one no . HDPE cylindrical tank of 500 lit two no. Electronic diaphragm type positive displacement pump for chemical dosing with plastic header. the electronic pump shall be operated on 220 volt single phase supply and shall be mounted directly on the tank top complete set of pipes, valves and fitting, foot valve magnetic float switch to trip the dosing pump at low level of chemical in the tank the free residual chlorine content in the filtered water shall not be less than 0.5 ppm the pump. the pump shall be suitable for following parameters capacity 6-12 LPH
30Multi Grade Filter: Supply, installation, Testing & commissioning of Multi-grade filter for filtration of Sewage water. MOC-MSEP,Dia 1000mm Height 1800mm, flow rate- 20cum/hr, filter media-pebels,grabels and silka sand,frontal piping and valva 50mm
31Activated Carbon Filter: Supply, installation, Testing & commissioning of activated carbon filter for filtration and colure removal in treated Sewage water. The filter shall be suitable for 20.0m3/Hr , MOC MSEP Dia 1000mm,height 1800mm, filter media type-activate carbon, pebels and gravles ,frontal piping and valves -50mm.
32Filter press: Supply, installation, testing & commissioning of filter press of Suitable size 18" x18” plates with CI frame, PP plateswith filter clothinterconnecting piping and poly dosing system complete. Manual Operation Make: Sachin/ Pharmatech/water 2 people
33Screw pump:Supply, installation, testing & commissioning of positive displacement type screw slurry pump with MS casing, SS-strator with internal rubber lining, gland packing seal, solid handling capacity upto 7 to 10% of the effective percentage of sludge and direct drive with motor.(Make-UT/Roto/water2people.) Capacity: 2.50m3/hr, Head: 40 mtrs. (1W+ 1S)
34UV : Supply, installation, testing & commissioning of ultraviolet system to prevent water infection before chlorination Capacity : 10cum/hr make –water 2 people
35Control Panel: Testing , checking and repairing Design, Fabrication, Supply, Installation, Testing and commissioning of free standing,floor mounting, non compartmentalized, totally enclosed, cubical type, dead front, control panel made of 14/16 gauge CRCA sheet steel and suitable for indoor application. The panel shall be suitable for 415volts 50 Hz, 4 wire supply, including control wiring and switch gear for controlling all the electrical motors and blower necessary for successful operation of STP. The panel shall consist the following component (cable) and accessories shall be mounted within each control panel.
36Copper Cabling :-Supply, installation, Testing & commissioning of copper cabling Connecting to various equipment including cast of cable tray cable, cable tie, gland etc req. size of cable as per site condition.
37Piping & valve/gate valve of STP: Supply and fixing of MS pipes to IS: 1239 including all fitting like tees, elbow, and bens unions. Offset hex nipples , collars, cutting , threading the pipes, jointing using white lead and cotton thread and pressure testing design including casing the valves with groove cutting machine clearing the debris grounding of concealed pipes making interconnection of all piping works valves of different size within the limits’ of STPas per the technical requirement etc as required
38Ozonation System: Supply, installation, Testing & commissioning of Ozonation system with capacity of 90gms/hr
39PART-C (Disposal of Treated Water for Purpose Gardening) :- Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 80 m : Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia (PWD SOR)
40Supply & Fixing of Slotted PVC pipe 6 kg./cm2 including socket etc all complete (110mm dia) (PWD SOR)
41Constructing masonary Chamber brick work with common burnt clay F.P.S.(non modular) bricks of class designation 150in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar :3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design (60x60x75 cm Inside (SOR 2020-21 Item-18.33 Ch-23)
4290x90x100 cm Inside (SOR 2020-21 Item-18.34 Ch-23)
43120x120x100 cm Inside (SOR 2020-21 Item-18.35 Ch-23)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail