}

Repair To Steel And Wooden Furniture Including Polishing Painting At Mil Stn Kanchrapara Under Ge Barrackpore, barrackpore-West Bengal

Military Engineer Services-MES has published Repair To Steel And Wooden Furniture Including Polishing Painting At Mil Stn Kanchrapara Under Ge Barrackpore. Submission Date for this Tender is 15-06-2022. Painting Tenders in barrackpore West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

32390009
Repair To Steel And Wooden Furniture Including Polishing Painting At Mil Stn Kanchrapara Under Ge Barrackpore
Open Tender
Indian
West Bengal
barrackpore
15-06-2022

Tender Details

Repair To Steel And Wooden Furniture Including Polishing Painting At Mil Stn Kanchrapara Under Ge Barrackpore

Key Value

Document Fees
INR 500 /-
EMD
INR 70000.0 /-
Tender Value
INR 35 Lakhs /-

BOQ Items

Name of Work: REPAIR TO STEEL AND WOODEN FURNITURE INCLUDING POLISHING/ PAINTING AT MIL STN KANCHRAPARA UNDER GE BARRACKPORE
Sl. No. Item Description
1REPAIRS TO BED WITH PLY TOP FOR THE FOLLOWING(DRG No.FD-246):-
2HEAD BOARD Removing decayed head board from its existing position and replace the same with new head board of overall size 900 x 610mm, frame made out from well seasoned 1st class hard wood (Teak) batten 75mm x 22mm thick with soft wood(chairbatten 03 Nos board), 4mm thick one side teak face BWRgrade, type BB Ply wood (three Nos of ply) and other side commercialto be provided on both sides of the head board covering the soft wood batten, 12mm dia half cut teak wood beading shall be provided to join the ply wood and Hollock wood frame all as Shown on drawing.
3FOOT BOARD Removing decayed foot board from its existing position and replace the same with new foot board of overall size 900mm long and 300mm height, frame made out from well seasoned 1st class hard wood (Teak) batten 75mm x 22mm thick with soft wood(chairbatten 03 Nos board), 4mm thick one side teak face BWRgrade, type BB Ply wood (three Nos of ply) and other side commercialto be provided on both sides of the foot board covering the soft wood batten, 12mm dia half cut teak wood beading shall be provided to join the ply wood and Hollock wood frame all as Shown on drawing.
4LONG RAIL Removing of each decayed long rail from its existing position and replace the same with new well seasoned 1st class hard wood (Teak) long rail of size 95mmx35mmx1980mm long rounded one edges or face made out from well seasonedwood all as shown on drawing.
5SHORT RAIL Removing of each decayed short rail from its existing position and replace the same with new well seasoned 1st class hard wood (Teak) short rail of size 95mmx35mmx900mm short rounded one edges or face made out from well seasonedwood all as shown on drawing.
6STIFFENER Removing of each decayed stiffner from its existing position and replace the same with new well seasoned 1st class hard wood (Teak) stiffener of size 60mmX40mmX880mm long rounded one edges or face made out from well seasonedwood all as shown on drawing.
7MS FLAT IRON STIFFENER Removing old MS stiffenerfrom hard bed and replace the same with MS flat iron of size 35mm x5mmx150mm, bent at right angle at four corner all as shown on drawing.
8TOP Removing decayed/wornout ply wood top from its existing position and replace the same with new plywood top made out from 12mm thick plywood (seven Nos of ply), BWR grade, type BBfixed to wooden rails with screws all as shown on drawing.
9POLISHING TO BED WITH PLY TOP Removal of old existing worn out polish from exposed portion of wooden surface by any means of bed with ply top including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras , burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
10REPAIRS TO CHAIR DINING FOR THE FOLLOWING (DRG No.FD-16(M), FD-279):-
11FRONT LEG Removing of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak)all as shown on drawing.
12REAR LEG Removing of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
13FRONT RAIL Removing of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing .
14REAR RAIL Removing of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned1st class hard wood (Teak) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing
15SIDE RAIL Removing of each decayed side rail from its existing position and replace the same with new siderail made out from well seasoned 1st class hard wood (Teak) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing .
16REAR STIFFENER Removing of each decayed rear stiffenerfrom its existing position and replace the same with new rear stiffenermade out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
17STIFFENER Removing of each decayedstiffenerfrom its existing position and replace the same with newstiffenermade out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
18POLISHING TO CHAIR DINING Removal of old existing worn out polish from exposed portion of wooden surface by any means of chair dinningincluding preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
19REPAIR TO CHAIR WRITING FOR THE FOLLOWING (DRG No. FD-280):-
20FRONT LEG Removing of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak)all as shown on drawing.
21REAR LEG Removing of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
22FRONT RAIL Removing of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing .
23REAR RAIL Removing of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned 1st class hard wood (Teak) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing
24SIDE RAIL Removing of each decayed side rail from its existing position and replace the same with new siderail made out from well seasoned 1st class hard wood (Teak) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing .
25REAR STIFFNER Removing of each decayed rear stiffenerfrom its existing position and replace the same with new rear stiffenermade out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
26STIFFENER Removing of each decayedstiffenerfrom its existing position and replace the same with newstiffenermade out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
27ARM Removing of each decayed arm from its existing position and replace the same with new arm made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
28POLISHING CHAIR WRITING Removal of old existing worn out polish from exposed portion of wooden surface by any means of chair writingincluding preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
29REPAIR TO CHAIR CB OFFICE FOR THE FOLLOWING (DRG NO.DB-3954 & DB-4124) :-
30FRONT LEG Removing of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak)all as shown on drawing.
31REAR LEG Removing of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
32FRONT RAIL Removing of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing .
33REAR RAIL Removing of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned 1st class hard wood (Teak) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing .
34SIDE RAIL Removing of each decayed side rail from its existing position and replace the same with new siderail made out from well seasoned 1st class hard wood (Teak) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing .
35STIFFNER Removing of each decayedstiffenerfrom its existing position and replace the same with newstiffenermade out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
36ARM Removing of each decayed arm from its existing position and replace the same with new arm made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
37POLISHING TO CHAIR CB OFFICE Removal of old existing worn out polish from exposed portion of wooden surface by any means of chair CB officeincluding preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
38REPAIR TO CHAIR CB W/O ARMS FOR THE FOLLOWING (DRG NO.DB-10092) :-
39FRONT LEG Removing of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak)all as shown on drawing.
40REAR LEG Removing of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
41FRONT RAIL Removing of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing .
42REAR RAIL Removing of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned 1st class hard wood (Teak) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing .
43SIDE RAIL Removing of each decayed side rail from its existing position and replace the same with new siderail made out from well seasoned 1st class hard wood (Teak) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing .
44STIFFNER Removing of each decayedstiffenerfrom its existing position and replace the same with newstiffenermade out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
45POLISHING TO CHAIR CB W/O ARMS Removal of old existing worn out polish from exposed portion of wooden surface by any means of chair CB without armincluding preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
46REPAIRS TO CHAIR EASY FOR THE FOLLOWING (DRG NO.FD-281, FD-229 ):-
47FRONT LEG Removing of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak)all as shown on drawing.
48REAR LEG Removing of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
49FRONT RAIL Removing of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing .
50REAR RAIL Removing of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned 1st class hard wood (Teak) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing .
51SIDE RAIL Removing of each decayed side rail from its existing position and replace the same with new siderail made out from well seasoned 1st class hard wood (Teak) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing .
52ARM Removing of each decayed arm from its existing position and replace the same with new arm made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
53POLISHING TO CHAIR EASY Removal of old existing worn out polish from exposed portion of wooden surface by any means of chair easyincluding preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
54REPAIRS TO CHAIR WOODEN BOTTOM W/O ARM FOR THE FOLLOWING [DRG NO. FD-56(M), FD-225, FD-285] :-
55FRONT LEG Removing of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak)all as shown on drawing.
56REAR LEG Removing of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
57FRONT RAIL Removing of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak) all as shown on drawing .
58REAR RAIL Removing of each decayed rear rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak) all as shown on drawing .
59SIDE RAIL Removing of each decayed side rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak) all as shown on drawing .
60STIFFNER Removing of each decayedstiffenerfrom its existing position and replace the same with newstiffenermade out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
61SEAT Removing of decayed/wornout plywood seat from its existingposition and replace the same with new seat made out from plywood of 6mm thick, BWR grade, type BB (five Nos of ply) trapezoidal in shape of length 445mm at front side and 405mm at rear side with 440mm in height all as show on drawing
62POLISHING TO CHAIR WOODEN BOTTOM W/O ARM Removal of old existing worn out polish from exposed portion of wooden surface by any means of chair wooden bottom without armincluding preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
63RECANNING OF VARIOUS TYPE OF CHAIRS FOR THE FOLLOWING (DRG NO.FD-279, FD-280, FD-281, FD-229) :- Removing of old unserviceable cane plastic from various chairs such as chair dining, chair writing, chair CB office, chair office CB, chair CB w/o arm and chair easy etc re-canning the same with new cane plastic 2mmwide half round white in colour for main canning and 3.5 to 4mm wide half round white in colour for border as approved quality all as shown on drawing.
64RE-CANNING OF CHAIR VARANDAH WITH CANE PLASTIC (DRG NO.FD-19, FD-256):- Removing of existing old unserviceable cane plastic from chair verandah and re-canning the same with new cane plastic (white colour) 6mm width of approved quality including painting with synthetic enamel paint white all as shown on drawing.
65REPAIRS TO LOCKER FOR THE FOLLOWING(DRG NO FD-54(M) , FD-222 & FD-359) :-
66TOP Removing decayed wooden top of locker from its existing position and replace the same with new top made out from 18mm thick well seasoned 1st class hardwood(Teak)plank complete all as shown on drawing.
67BOTTOM Removing decayed wooden from bottomside of locker from its existing position and replace the same with newbottommade out from 18mm thick well seasoned 1st class hard wood (Teak) plank complete all as shown on drawing.
68SIDE Removing decayed wooden each side of locker from its existing position and replace the same with new side made out from 18mm thick well seasoned 1st class hard wood (Teak) plank complete all as shown on drawing.
69SHUTTER Removing decayed shutter (Single leaf) from its existing position and replace the same with new leaf made out from 18mm thick veneered particle board (exterior grade) one side teak finish with 6mm thick and 1st class hard wood (Teak) beading all round the shutter all as shown on drawing.
70BACK Removing decayed back from its existing position and replace the same with new back made out from 6mm thick ply wood (five Nos of ply), type BB, BWR grade all as shown on drawing
71SHELF Removing each decayed shelf from its existing position and replace the same with new shelf made out from 12mm thick well seasoned 1st class hard wood (Teak) planks all as shown on drawing.
72HANGING ROD Removing old broken hanging rod from its existing position and replace the same with new hanging rod made out from 20mm (external dia) aluminium anodized conduit with a pair of sockets all as shown on drawing.
73LEG Removing decayed wooden each leg of locker from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak) of size 50mmx50mm all as shown on drawing.
74RAIL Removing decayed wooden each rail of locker from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak) of size 25mmx40mm all as shown on drawing
75HANDLE S&F for 100mm long CP handle.
76HINGES S&Ffor 75mm long cold rolled mild steel butt hinges (medium weight) fixed with steelscrews.
77HASP & STAPLE Supply and fixing for 75mm long hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with steel wood screws .
78POLISHING TO LOCKER Removal of old existing worn out polish from exposed portion of wooden surface by any means of lockerincluding preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
79REPAIRS TOTRESTLE STORE ROOM WOODENFOR THE FOLLOWING [DRG NO FD-86(M),FD-141]:-
80LEG Removing of decayed each leg of trestle store room from its existing positionand replace the same with new leg made out from well seasoned ‘SAL’ wood all as shown on drawing.
81TOP LONG RAIL Removing of decayed top long rail from its existing position and replace the same with new long rail made out from well seasoned ‘SAL’ wood all as shown on drawing.
82CROSS STIFFENER Removing of decayed cross stiffenerfrom its existing position and replace the same with new cross stiffenermade out from well seasoned ‘SAL’ wood all as shown on drawing.
83INTERMEDIATE STIFFENER Removing of decayed intermediate stiffener from its existing position and replace the same with new intermediate stiffner made out from well seasoned ‘SAL’ wood all as shown on drawing.
84REPAIRS TO TABLE WRITING FOR THE FOLLOWING (DRG NO. FD-33, FD-249, FD-275) :-
85LEG Removing decayed each leg of table writing from its existing positionand replace the same with new leg made out from well seasoned 1st class hard wood (Teak) all as shown on drawing
86TOP RAIL Removing decayed each top rail of table writing from its existing position and replace the same with new top rail made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
87BOTTOM RAIL Removing decayed each bottomrail of table writing from its existing position and replace the same with new bottom rail made out from well 1st class hard wood (Teak) all as shown on drawing
88STIFFENER Removing decayed each stiffner of table writing from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
89SIDE BOX WITH DRAWER Removing decayed side almirah (side box ) with drawer and replace the same with 18mm thick veneered particle board (exterior grade) made having teak face at one side and other side commercial for side, back , front and bottom side of the drawer, stiffener, bearer shall be made out from well seasoned second class hardwood, rest all as shown on drawing.
90TOP Removing decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak) beading allround the edging all as shown on drawing.
91POLISHING TO TABLE WRITING Removal of old existing worn out polish from exposed portion of wooden surface by any means of table writingincluding preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
92REPAIRS TO TABLE 3’X2’ W/O DRAWER FOR THE FOLLOWING [DRG NO. FD-284, FD-55, FD-42(M)]:-
93LEG Removing decayed each leg from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
94TOP RAIL LONG Removing decayed each top long rail from its existing position and replace the same with new long rail made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
95TOP RAIL SHORT Removing decayed each top short rail from its existing position and replace the same with new short rail made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
96STIFFENER Removing decayed each stiffenerfrom its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
97TOP Removing decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), grade-I quality,prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak) beading allround the edging provide middle stiffener at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legsall as shown on drawing.
98POLISHING TO TABLE 3"x2" W/O DRAWER Removal of old existing worn out polish from exposed portion of wooden surface by any means of table 3"X2" without drawerincluding preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
99REPAIRS TO TABLE 3"X2" WITH DRAWER FOR THE FOLLOWING [DRG NO. FD-283, FD-41(M) ]:-
100LEG Removing decayed each leg from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
101TOP RAIL LONG Removing decayed each top long rail from its existing position and replace the same with new long rail made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
102TOP RAIL SHORT Removing decayed each top short rail from its existing position and replace the same with new short rail made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
103STIFFNER Removing decayed each stiffenerfrom its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
104TOP Removing decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), grade-I quality,prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak) beading allround the edging provide middle stiffener at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legsall as shown on drawing.
105DRAWER Removing decayed and replace the drawer made out from well seasoned 1st class hard wood (Teak) for front, rear & side with track rail, guide rail & fillet and bottom shall be made out from 6mm thick plywood (five Nos of ply), type BB, BWR grade complete all as shown on drawing.
106POLISHING TO TABLE 3"x2" WITH DRAWER Removal of old existing worn out polish from exposed portion of wooden surface by any means of table 3"X2" with drawerincluding preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
107REPAIRS TO TABLE DINING FOR 6 PERSONS FOR THE FOLLOWING (DRG NO. FD-30, FD-239, FD-273) :-
108LEG Removing decayed each leg from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
109TOP RAIL LONG Removing decayed each top long rail from its existing position and replace the same with new long rail made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
110TOP RAIL SHORT Removing decayed each top short rail from its existing position and replace the same with new short rail made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
111STIFFNER Removing decayed each stiffenerfrom its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
112TOP Removing decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), grade-I quality,prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak) beading allround the edging provide middle stiffener at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legsall as shown on drawing.
113POLISHING TO TABLE DINING FOR 6 PERSONS Removal of old existing worn out polish from exposed portion of wooden surface by any means of table dinning for 6 person including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
114REPAIRS TO TEAPOY FOR THE FOLLOWING (DRG NO.FD-34, FD-232, FD-382, FD-278):-
115LEG Removing decayed each leg from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
116TOP RAIL LONG Removing decayed each top long rail from its existing position and replace the same with new long rail made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
117TOP RAIL SHORT Removing decayed each top short rail from its existing position and replace the same with new short rail made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
118STIFFENER Removing decayed each stiffenerfrom its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
119TOP Removing decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), grade-I quality,prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak) beading allround the edging provide middle stiffener at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legsall as shown on drawing.
120POLISHING TO TEAPOY Removal of old existing worn out polish from exposed portion of wooden surface by any means of teapoy including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
121REPAIRTS TO TABLE CENTRE FOR THE FOLLOWING (DRG NO.FD-29 , FD-235, FD-274 ):-
122LEG Removing decayed each leg from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
123TOP RAIL LONG Removing decayed each top long rail from its existing position and replace the same with new long rail made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
124TOP RAIL SHORT Removing decayed each top short rail from its existing position and replace the same with new short rail made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
125TOP Removing decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), grade-I quality,prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak) beading allround the edging provide middle stiffener at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legsall as shown on drawing.
126POLISHING TO TABLE CENTRE Removal of old existing worn out polish from exposed portion of wooden surface by any means of table centre including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
127REPAIRS TO TEAPOY VERANDAH FOR THE FOLLOWING (DRG NO.FD-35, FD-383, FD-208):-
128TOP Removing decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade) Grade-I quality, prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick well seasoned second class hard wood beading all round the edging provide middle stiffener at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legsall as shown on drawing.
129PAINTING TO TEAPOY VERANDAH M&L for applying two coats of synthetic enamel (white) paint with spray gun to frame of teapoy verandah including preparation of surfaces complete all as specified and directed.
130REPAIRS TO TABLE DRESSING GENTS FOR THE FOLLOWING (DRG NO.FD-230, FD-379):-
131TOP AND BOTTOM OF BOX Removing decayed top and bottom of box from its existing position and replace the same with new top made out from 12mm thick pre-laminated particle board (exterior grade), grade-I quality, with 6mm thick andwell seasoned 1st class hardwood (Teak)wooden beading allround the edging. Bottom of the box shall be made out 12mm thick ply wood(seven Nos of ply), type BB, BWR Gde complete all as shown on drawing
132SIDE OF BOX Removing decayed each side of the box from its existing position and replace the same with new side of the box made out from 12mm thickpre-laminated particle board (exterior grade), grade-I quality, one side decorative all as shown on drawing.
133BACK OF BOX Removing decayed each back of the box from its existing position and replace the same with new back of the box made out from 12mm thick plywood(seven Nos of ply), type BB,type BWR grade, complete all as shown on drawing.
134DRAWER Removing decayed drawer and supply and fixing drawer front & side made out from 12mm thickpre-laminated particle board (exterior grade), grade-I quality, one side decorative, bottom shall be made out from 6mm thickply wood (five Nos of ply), type BB, BWR grade and back shall be made out from 12mm thick well seasoned second class hardwood all as shown on drawing.
135MIRROR Removing broken mirror from its existing position and supply and fixingfor copper plated 5.5mm thick mirror mounted on new frame made out 6mm thick ply wood (five Nos of ply), type BB, BWR grade and with well seasoned second class hard wood all as shown on drawing. (Make : Modiguard/Saint gobain as approved)
136POLIHSHING TO TABLE DRESSING GENTS Removal of old existing worn out polish from exposed portion of wooden surface by any means of table dressing gents including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
137REPAIRS TO TABLE DRESSING LADIES FOR THE FOLLOWING (DRG NO.FD-251) :-
138TOP Removing decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), grade-I quality,prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak) beading allround the edging provide middle stiffener at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legsall as shown on drawing.
139SIDE Removing decayed side from its existing position and replace the same with new side made out from 18mm thick veneered particle board (exterior grade) with one face teak and other face commercial veneer all as shown on drawing.
140BACK Removing decayed side from its existing position and replace the same with new side made out from 12 mm thick veneered particle board (exterior grade) with commercial veneers on both faces all as shown on drawing.
141DRAWER Removing drawer and replace the side and back of drawer made out from 12mm thick well seasoned 1st class hard wood (Teak). Bottom of the drawer shall be made out from 6mm thick ply wood (five Nos of ply), type BB, BWR grade. Front of the drawer shall be made out from 18mm thick veneered particle board (exterior grade) with commercial veneers on both faces with 1.00mm thick plastic laminated sheet (plain & wood grain) pasted over particle board with approved synthetic adhesive all as shown on drawing.
142MIRROR Removing broken mirror with frame and supply and fixing for mirror 5.50 mm thick 355mmx1220mm size free from any cracks/scratches and distorted image etc mounted on 6mm thick ply wood (five Nos of ply), type BB, BWR grade and with 25mmx19mm teak wood well seasoned timber frame all as shown on drawing. (Make : Modiguard/Saint gobain as approved)
143POLISHING TO TABLE DRESSING LADIES Removal of old existing worn out polish from exposed portion of wooden surface by any means of table dressing ladies including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
144REPAIR TO TABLE 900MMX900MM FOR THE FOLLOWING (DRG NO.FD-88, FD-291):-
145LEG Removing decayed each leg of table 900mmx900mm from its existing position and replace the same with new leg made out well seasoned 1st class hard wood (Teak) all as shown in drawing.
146SIDE RAIL LONG Removing each decayed side rail long from its existing position and replace the same with newside raillong made out from well seasoned 1st class hard wood (Teak) all as shown in drawing.
147TOP RAIL SHORT Removingdecayed each top rail short from its existing position and replace the same with newtop railshortmade out from well seasoned 1st class hard wood (Teak) all as shown in drawing.
148TOP Removing decayed top from its existing position and replace the same with new 18/19mm thick Prelaminated Particle board (exterior Grade), grade-I quality, prelaminated one side with decorative choice lamination & other side balancing white laminationincluding provision of 4mm thick teak wood beading alround the edging all as shown on drawing.
149MS STIFFENER Provision of mild steel flat iron of size 20mmx3mmx200mm long bent to shape as in strap to all joints, jointing length & top of each table fixed with suitable size wood screws all as directed.
150POLISHING TO TABLE 900MM X 900MM Removal of old existing worn out polish from exposed portion of wooden surface by any means of table (900mmX900mm)including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
151REPAIR TO TABLE BED SIDE FOR THE FOLLOWING (DRG No FD-276, FD-248, FD-28, FD-210):-
152TOP Removing decayed top from its existing position and replace the same with new 18/19mm thick Prelaminated Particle board (exterior Grade), grade-I quality, prelaminated one side with decorative choice lamination & other side balancing white laminationincluding provision of 4mm thick teak wood beading alround the edging all as shown on drawing.
153LEG Removing decayed wooden each leg of table bed side from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak) of size 65mmx50mm all as shown on drawing.
154BACK Removing decayed each back of table bed side from its existing position and replace the same with new back made out from 6mm thick plywood (five Nos of ply), type BB, BWR grade of required size all as shown on drawing.
155SIDE Removing decayed each side of table bed side from its existing positon and replace the same with 18mm thick one side teak face particle board (Exterior Grade), grade-I quality of required size all as shown on drg.
156POLISHING TO TABLE BED SIDE Removal of old existing worn out polish from exposed portion of wooden surface by any means of table bed side including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
157REPAIRS TO TABLE PEG FOR THE FOLLOWING (DRG NO.FD-25, FD-236, FD-277, FD-384):-
158LEG Removing decayed each leg of table 900mmx900mm from its existing position and replace the same with new leg made out well seasoned 1st class hard wood (Teak) all as shown in drawing.
159TOP LONG RAIL Removing decayed each top long rail from its existing position and replace the same with new long rail made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
160TOP SHORT RAIL Removing decayed each top short rail from its existing position and replace the same with new short rail made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
161TOP Removing decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), grade-I quality,prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak) beading allround the edging provide middle stiffener at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legsall as shown on drawing.
162POLISHING TO TABLE PEG Removal of old existing worn out polish from exposed portion of wooden surface by any means of table peg including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
163REPAIR/REPLACEMENT OF FOAM CUSHION OF SOFA SET 05 SEATER (DRG NO.FD-281/FD-282):-
164Removal of old unserviceable foam, cushion sofa set(comprising of 10 Nossingle cushion including seat and back) and supply and fixing new foam cushion 100mm thick 40/32 density covered with approved quality tapestry cloth (cost of tapestry cloth shall; not be less than Rs.450.00 per metre). (Make : Kurlon/Sleepwell as approved)
165Removal of old unserviceable tapestry cloth from each foam cushion sofa set (comprising of 10 Nos single cushion)and replace with new tapestry cloth of approveds quality (cost of tapestry cloth shall not be less than Rs. 450.00 per metre).
166POLISHING TO SOFA SET FIVE SEATER Removal of old existing worn out polish from exposed portion of wooden surface by any means of sofa set five seater including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
167REPAIRS TO SIDE BOARD FOR THE FOLLOWING (DRG NO FD-26, FD-372, FD-241,FD-371):-
168Removing decayed top from its existing position and replace the same with new veneered particle board 18mm thick (exterior grade), grade-I quality, with 1.00mm thick plastic laminated sheet plain & wood grain pasted over particle board with approved synthetic adhesive all as shown on drawing.
169Removing decayed wooden each leg of side board from its existing position and replace the same with new leg made out from well seasoned 2nd class hardwood of size 125mmX125mmX45mm complete all as shown in drawng.
170Removing decayed back from its existing position and replace the same with new 6mm thick ply wood (five Nos of ply), type BB, BWR grade, complete all as shown on drawing.
171Removing decayed shutter (single leaf) from its existing position and replace the same with 18mm thick veneered particle board (exterior grade), grade-I quality with one face teak veneer and other side commercial and 6mm thick well seasoned 1st class hard wood (Teak/Seasam) beading alround the shutter all as shown on drawing.
172Removing decayed each side of side board from its existing position and replace the same with 18mm thick veneered particle board (exterior grade), grade-I quality with one face teak veneer all as shown on drawing.
173Removing decayed drawer and replace the drawer made out from 18mm thick veneered particle board (exterior grade) grade-I quality,with one face teak veneer on front side and 6mm thick plywood (five Nos of ply), type BB, BWR grade on botton knob for the drawer shall be provided as approved by Engineer-in-Charge and rest all as shown on drawing.
174POLISHING TO SIDE BOARD Removing of old existing wornout polish from exposed portion of wooden surface by sand paper and preparation of new surface smooth for further new polishing (Including scoring out all previous marking, numbering ) and polishing all exposed portion by spirit polish mixed with shellac gde-I, chandras, burnt saina, raw saina, sindur etc to obtain high gloss finishing upto the full satisfaction of Engineer-in-charge.
175REPAIR OF BOOK CASE FOR THE FOLLWING (DRG NO. FD-45, FD-237):-
176TOP Removing decayed top from its existing position and replace the same with new veneered particle board 18mm thick (exterior grade), grade-I quality, with 1.00mm thick plastic laminated sheet plain & wood grain pasted over particle board with approved synthetic adhesive all as shown on drawing.
177BACK Removing decayed back from its existing position and replace the same with new 6mm thick ply wood (five Nos of ply), type BB, BWR grade, complete all as shown on drawing.
178SIDE Removing decayed each side of book case from its existing position and replace the same with 18mm thick veneered particle board exterior grade with one face teak veneer all as shown on drawing.
179SHELF Removing each decayed shelf from its existing position and replace the same with new shelf made out from 12mm thick well seasoned 2nd class hardwooden planks all as shown on drawing.
180SHUTTER Removing decayed shutter (single leaf) from its existing position and replace the same with 18mm thick veneered particle board exterior grade with one face teak veneer and other side commercial and 6mm thick well seasoned 2nd class hard wood beading alround the shutter all as shown on drawing.
181POLISHING TO BOOK CASE Removing of old existing wornout polish from exposed portion of wooden surface by sand paper and preparation of new surface smooth for further new polishing (including scoring out all previous marking, numbering) and polishing all exposed portion by spirit polish mixed with shellac gde-I, chandras, burnt saina, raw saina, sindur etc to obtain high gloss finishing upto the full satisfaction of Engineer-in-charge.
182REPAIR OF ALMIRAH LARGE AND MEDIUM STEEL (DRG NO.FD-67, FD-1032, FD-1033, FD-1031, FD-1034):-
183LEGS S&F for new leg made out from MS sheet 1.6mm thick and applying one coat of red oxide zinc chrome primer over two coats of synthetic enamel paint with spray painting by the spray gun after removing of each old worn out legs from its existing portion of Almirah large steel with shelves and Almirah medium steel with shelves and replace the same complete all as specified and directed and as shownon drawing.
184HANDLES S&F for new handle made out from mild steel over chromiumplated ofsize 150mm size and weight of each handle should not be less than 185gm of existing pattern after removing of old unserviceable / broken handle from its existingposition of almirah large steel with shelves and almirah medium steel with shelves and replace same complete all as specified and directed and as shownon drawing.
185LOCKS S&F for new brass, six lever (Make : Godrej) lock with steel CP duplicate keys, weight of each lock should not be less than260gm after removing of old unserviceable lock from its existingposition of almirah large steel with shelvesand almirah medium steel with shelves and replace same complete all as specified and directed and as shownon drawing.
186SHELVES FOR ALMIRAH LARGE WITH SHALVES STEEL (Drg No. FD-67(M), FD-1031 & FD-1032). S&F for new shelf made out of MS Sheets of 1.00mm thick and applying one coat of red oxide zinc chrome primer over two coats of synthetic enamel paint with spray painting by spray gun after removing of old worn out shelf from its existingportion of almirah large steel with shelvesand replace same complete all as specified and directed and as shownon drawing.
187PAINTINGS OF ALMIRAH LARGE STEEL WITH SHALVES (Drg No. FD-67(M), FD-1031 & FD-1032). M&L for applying spray painting two coats with synthetic enamel (Olive Green) paint internally and externally by spray gun after removing of existing old worn out paint by any means with proper treatment from almirah large steel with shelves complete all as directed shown drawings.
188PAINTINGS OF ALMIRAH MEDIUM STEEL WITH SHALVES (Drg No. FD-67(M), FD-1031 & FD-1032). M&L for applying spray painting two coats with synthetic enamel (Olive Green) paint internally and externally by spray gun after removing of existing old worn out paint by any means with proper treatment fromalmirah medium steel with shelvescomplete all as directed shown drawings.
189PAINTINGS OF BOOK SHELF OPEN LARGE STEEL (Drg No.FD-69) M&L for applying spray painting two coats with synthetic enamel (Olive Green) paint internally and externally by spray gun after removing of existing old worn out paint by any means with proper treatment from book self open large steel complete all as directed shown drawings.
190PAINTINGS OF TABLE OFFICE CLERK STEEL (Drg No.FD-84) M&L for applying spray painting two coats with synthetic enamel (Olive Green) paint internally and externally by spray gun after removing of existing old worn out paint by any means with proper treatment from able office clerk steel complete all as directed shown drawings.
191PAINTINGS OF TABLE OFFICE OFFICER STEEL(DRG NO.FD-84, FD-1003):- M&L for applying spray painting two coats with synthetic enamel (Olive Green) paint internally and externally by spray gun after removing of existing old worn out paint by any means with proper treatment from table office officer steel complete all as directed shown drawings.
192PAINTINGS OF CHAIR CB STEEL WITH ARMS [Drg No.FD-75(M)] M&L for applying spray painting two coats with synthetic enamel (Olive Green) paint internally and externally by spray gun after removing of existing old worn out paint by any means with proper treatment from Chair CB steel with arm complete all as directed shown drawings.
193PAINTINGS OF CHAIR CB STEEL WITHOUT ARMS[Drg No.FD-75(M)] M&L for applying spray painting two coats with synthetic enamel (Olive Green) paint internally and externally by spray gun after removing of existing old worn out paint by any means with proper treatment from Chair CB steel with out arms complete all as directed shown drawings.
194PAINTINGS OF BOOK CASE STEEL (Drg No.FD-1028) M&L for applying spray painting two coats with synthetic enamel (Olive Green) paint internally and externally by spray gun after removing of existing old worn out paint by any means with proper treatment from book case steel complete all as directed shown drawings.
195PAINTING OF TABLE DINING ORS STEEL(FD-165) M&L for applying spray painting two coats with synthetic enamel (Olive Green) paint internally and externally by spray gun after removing of existing old worn out paint by any means with proper treatment from table dinning ORs steel complete all as directed shown drawings.
196PAINTINGS OF LOCKER STEEL(GE/BKP/02/07) M&L for applying spray painting two coats with synthetic enamel (Olive Green) paint internally and externally by spray gun after removing of existing old worn out paint by any means with proper treatment from Locker steel complete all as directed shown drawings. .
197REPAIR OF CHARPOY GI PIPE (DRG NO.FD-220 AND BKP/TD/168) :-
198LEGS M&L for 32mm bore (medium grade) GI tubing leg (ISI marked) of charpoy after removing of old unserviceable leg of charpoy GI pipe from its existing position all as shown on drawing.
199LONG RAIL M&L for 32mm bore (medium grade) GI tubing of long rail (ISI marked) size of 1884 mm long of charpoy GI after removing of old unserviceable long rails of charpoy GI pipe from its existing position all as shown on drawing cut to required length ofand threading at both ends all as shown on drawing.
200SHORT RAIL M&L for 32mm bore (medium grade) GI tubing of short rail (ISI marked) cut to required length of 900 mm long and threading at both ends all as shown on drawing.
201ELBOW GI M&L for 32mm bore 3 way GI elbow weight of each GI elbow should not less than 480gms as per ISI specification all as shown on drawing.
202PLY TOP 12MM THICK S&F for 12mm thickBWR grade, type BB, both sides commercial ply wood (7 Nos of ply)with 6mm thick well seasonedteak wood duly polished found at round the edging of the top and beading required 4mm dia 65mm long counter shank machine nut, bolt, washer on top including removing of existing top all as directed by Engineer- in -charge. (Make of Ply wood : Century Ply/Greenply/National ply/Kit ply as approved)
203REPAIR OF CHAIR CB STEEL WITH ARMS [DRG NO.FD-75(M)]:-
204WOODEN FRAME SEAT FOR CHAIR CB STEEL WITH ARMS S&F for canned with wooden seat frame made out from well seasoned teak wood duly canned as per Godrej pattern with new plastic cane of 2mm to 2.5mm wide half round oval shape for caning and 4mm wide of half round oval shape cane for bedding & applying two coats of black polish after removing of unserviceable /decayed seat frame from existing portion from chair CB steel with arm as replaced all as directedand shown on drawing.
205WOODEN FRAME BACKSEAT FOR CHAIR CB STEEL WITH ARMS S&F for canned with wooden back frame made out from well seasoned teak wood duly canned as per Godrej pattern with new plastic cane of 2mm to 2.5mm wide half round oval shape for caning and 4mm wide of half round oval shape cane for bedding & applying two coats of black polish after removing of unserviceable /decayed back frame from existing portion from chair CB steel with arm as replaced all as directedand shown on drawing.
206WOODEN ARM FOR CHAIR CB STEEL WITH ARMS S&F fornew arm made out from well seasoned teak wood and apply two coats of black polish including removing broken arm from its existing portion of chair CB steels with arm all as directed and shown on drawing.
207STIFFENER FOR CHAIR CB STEEL WITH ARM S&F for new MS flat of stiffener size 520mmx15mmx4mm by welding including two coats of synthetic (Olive Green) paint over one coat of red oxide zinc chrome primer including removing of old worm out MS cleat from its existing position from chair CB steel with arm complete all as directed and shown on drawing.
208REPAIR OF CHAIR CB STEEL WITH OUT ARMS [DRG NO.FD-75(M)]:-
209WOODEN FRAME SEAT BACKSEAT FOR CHAIR CB STEEL W/O ARMS S&F for canned with wooden seat frame made out from well seasoned teak wood duly canned as per Godrej pattern with new plastic cane of 2mm to 2.5mm wide half round oval shape for caning and 4mm wide of half round oval shape cane for bedding & applying two coats of black polish after removing of unserviceable /decayed seat frame from existing portion from chair CB steel without arm as replaced all as directedand shown on drawing.
210WOODEN FRAME BACK FOR CHAIR CB STEEL W/O ARMS S&F for canned with wooden back frame made out from well seasoned teak wood duly canned as per Godrej pattern with new plastic cane of 2mm to 2.5mm wide half round oval shape for caning and 4mm wide of half round oval shape cane for bedding & applying two coats of black polish after removing of unserviceable /decayed back frame from existing portion from chair CB steel without arm as replaced all as directedand shown on drawing.
211STIFFENER FOR CHAIR CB STEEL W/O ARMS S&F for new MS flat of stiffener size 420mmx15mmx4mm by welding including two coats of synthetic (Olive Green) paint over one coat of red oxide zinc chrome primer including removing of old worm out MS cleat from its existing position from chair CB steel without arm complete all as directed and shown on drawing.
212REPAIRS TO TABLE OFFICE CLERK STEEL (DRG NOFD-84, FD-381, FD-1004):-
213LEG Removing of old unserviceable leg from its existing position and replace the same with new leg made out of MS square pipe 25mm 16 gauge all as shown on drawing.
214DRAWER Removing of old unserviceable drawer from its existing position and replace the same with new drawer made out of 20 gaugeMS sheet all as shown on drawing.
215LOCK & KEYS Removing of old unserviceable lock of table office clerk steel and supply and fixing with new brass six lever Godrej pattern lock with steel CPduplicate keys all as shown on drawing. (Make : Godrej/Link as approved.)
216TOP Removing decayed top from its existing position and replace the same with new top made out from 18mm thick veneered particle board (exterior grade), grade-I quality, with commercial veneers on both sides with 1.00mm thick plastic laminated sheet (plain & wood grain)pasted over particle board with approved synthetic resin adhesive with 6mm thick well seasoned second class hard wood beading all-round the edging all as shown on drawing. (Make of Ply wood : Century Ply/Greenply/National ply/Kit ply as approved)
217REPAIRS TO TABLE OFFICE OFFICER STEEL (DRG NO.FD-84, FD-1003):-
218LEG Removing of old unserviceable leg from its existing position and replace the same with new leg made out of MS square pipe 25mm 16 gauge all as shown on drawing.
219DRAWER Removing of old unserviceable drawer from its existing position and replace the same with new drawer made out of 20 gaugeMS sheet all as shown on drawing.
220LOCK & KEYS Removing of old unserviceable lock of table office clerk steel and supply and fixing with new brass six lever Godrej pattern lock with steel CPduplicate keys all as shown on drawing. (Make : Godrej/Link as approved.)
221TOP Removing decayed top from its existing position and replace the same with new top made out from 18mmthick veneered particle board (exterior grade), Grade-I quality, with commercial veneers on both sides with 1.00mm thick plastic laminated sheet (Plain & wood grain) pasted over particle board with approved synthetic resin adhesive with 6mm thick well seasoned second class hard wood beading all-round the edging all as shown on drawing. (Make of particle board : Century Ply /Greenply/ National ply/Kit ply as approved)
222REPAIRS TO TABLE DINING ORS STEEL(DRG NO.FD-165):-
223LEG Removing of old unserviceable leg from its existing position and replace the same with new leg made out of MS square pipe 25mm 16 gauge all as shown on drawing.
224TOP Removing of decayed top from its existing position and replace the same with new top made out from 18mm thick veneered particle board (exterior grade), Grade-I quality, with commercial veneers on both sides with 1.00mm thick plastic laminated sheet (Plain & wood grain) pasted over particleboard with approved synthetic resin adhesive with 6mm thick well seasoned 1st class hard wood (Teak/Seasam) beading all-roundthe edging all as shown on drawing. (Make of Ply wood : Century Ply/Greenply/National ply/ Kit ply as approved)
225REPAIRS TO LOCKER STEEL (FD-1029 & GE/BKP/02/07):-
226LEGS M&L after removing of each old worn out legs from its existing position of locker steel and replace the same by supply and fixing with new leg made out from MS sheet 1.6mm thick and applying one coat of red oxide zinc chrome primer over two coats of synthetic enamel paint with spray painting, complete all as specified & directed and as shownon drawing.
227HANDLES S&F for 100mm long aluminium handle of existing pattern after removingof old unserviceable/broken handle from its existing position of locker steel complete all as directed.
228HASP & STAPLE S&F for 75mm long hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with steel wood screws.
229REPAIRS TO CHARPOY FOLDING IP HARD TOP (DRG NO.FD/388(R):-
230TOP Removing of old unserviceable top from its existing position and replace the same with new topof 9 mm thick BWR Phenoled commercial plywood (un-polished) cut into two pieces to facilitate folding of bed all as shown on drawing. (Make of Ply wood : Century Ply/Greenply/National ply/Kit ply as approved)
231FLAT IRON Removing of old unserviceable flat iron from its existing position and replace the samewith new mild steel flat iron of size 220mmx60mmx32mm cut to shape and bent @ 150 to avoid fouling with leg all as shown on drawing
232REPAIRS TO COMPUTER CHAIR/REVOLVING CHAIR WITH ARMS (DRG NO - TP &FD/E6/MAP/01 )
233WHEEL Removing of old unserviceable revolving wheel from its existing position of computer chair and revolving chairand replace the same by supply and fixing with revolving wheel PVC 40mm.to make completely functional rest all as shownon drawing or directed by Engineer-in-charge.
234HYDRAULIC SYSTEM Removing of old unserviceable hydraulic system from its existing position of computer chair and revolving chairand replace the same by supply and fixing with new hydraulic system to make completely functional rest all as shownon drawing or directed by Engineer-in-charge.
235BASE Removing of old unserviceable base from its existing position of computer chair and revolving chairand replace the same by supply and fixing with new base to make completely functional rest all as shownon drawing or directed by Engineer-in-charge.
236SEAT Removing of old unserviceable seat from its existing position of computer chair and revolving chairand replace the same by supply and fixing with new seat to make completely functional rest all as shownon drawing or directed by Engineer-in-charge.
237BACK Removing of old unserviceable back from its existing position of computer chair and revolving chairand replace the same by supply and fixing with new back to make completely functional rest all as shownon drawing or directed by Engineer-in-charge.
238ARMS Removing of old unserviceable arms from its existing position of computer chair and revolving chairand replace the same by supply and fixing with new back to make completely functional rest all as shownon drawing or directed by Engineer-in-charge.
239REPAIRS TO CHARPOYIP HARD TOP DRG NO.FD/MAP-II/01):-
240TOP Removing of old unserviceable top from its existing position and replace the same with new topof 12 mm thick BWR grade both sides commercial plywood (seven Nos of ply) complete all as shown on drawing as directed by Engneer-in-Charge. (Make of Ply wood : Century Ply/Greenply/National ply/Kit ply as approved)
241REPAIRS TO CHAIR SCHOOL WITH HAND BOARD (DRG NO.FD/E6/MAP/05):-
242SEAT & BACK Removing of old unserviceable seat & back from its existing position and replace the same with new seat & back made out of blow plast or equivalent approved by E-in-C’s Branch all as shown on drawing.
243HAND BOARD Removing of old unserviceable hand board from its existing and replace the same with new hand board made out from 18mm thick pre laminated particle board exterior grade-1 hinged at right hand side of chair arm screwed to 25mm dia MS pipe inserted in 20mm dia MS rod welded to frame . Standard PVC edging 1.6mm thick shall be provided all-round the hand board, rest all as shown in drawing.
244BASKET(JALI) Removing of old unserviceable steel basket (Jali) from its existing position and replace the same with new basket (Jali) made of 6mm MS rod all as specifiedand shown on drawing
245REPAIRS TO TABLE BED SIDE (DRG NO. FD/E6/MAP/15(R):-
246TOP Removing decayed top from its existing position and replace the same with new 18/19mm thick prelaminated Particle Board (exterior Grade), grade-I quality, prelaminated one side with decorative choice lamination & other side balancing white lamination. Standard PVC edgeing 1.6mm thick shall be provided all around the top of table bed side all as shown on drawing.
247BACK Removing decayed each back of table bed side from its existing position and replace the same with new back made out from 6mm thick plywood (five Nos of ply), type BB, BWR grade of required size all as shown on drawing.
248DRAWER Removing decayed drawer and replace the drawer made out from 12mm thick pre-laminated particle board (exterior grade), grade-I quality, one side decorative of front, side and back, bottom shall be made out from 6mm thick ply wood (five nos of ply), type BB, BWR grade of required size as approved and all as showing on drawing.
249HANDLE S&F for 100mm long CP handle of existing pattern after removing of old unserviceable /broken handle from its existing position complete all as specified and directed.
250HARD RUBBER/PVC RING Removing of each decayed hard rubber/PVC ring from its existing position of table bed side and replace the same with new hard rubber/PVC ring complete all as showing on drawing.
251REPAIRS TO CHAIR VERANDAH (DRG NO.FD/MAP-II/15)
252SEAT Removing of old unserviceable PVC seat from its existing position ofchair verandahand replace the same by supply and fixing with new PVC seat4mm thick and grooves 90X10mm 10 Nos on seat all as shownon drawing or directed by Engineer-in-charge. (Make:Brite/Cello/Supreme/Nilkamal as approved)
253BACK Removing of old unserviceable back PVC back from its existing position of chair verandah and replace the same by supply and fixing with new PVC4mm thickback to make completely functional rest all as shownon drawing or directed by Engineer-in-charge. (Make:Brite/Cello/Supreme/Nilkamal as approved)
254HARD RUBBER SHOE Removing of each decayedhard rubber shoe from its existing position of chair varandah and replace the same with newhard rubber shoe all as shown on drawing and directed by Engineer-in-Charge.
255PAINTINGS OF CHAIR VERANDAH (DRGNO: FD/MAP-II/15) M&L for applying spray painting two coats with synthetic enamel (white) paint over a coat of red oxide primer with spray gun afterremoving of existing old worn out paint by any means with proper treatment from chair verandahcomplete all as directed and shown on drawings.
256REPAIRS TO TABLE DRESSING GENTS FOR THE FOLLOWING (DRG NO.FD/E6/MAP/16):-
257BACK Removing decayed side from its existing position and replace the same with new side made out from 12 mm thick veneered particle board (exterior grade) , grade-I quality with commercial veneers on both faces all as shown on drawing. (Make of Ply wood : Century Ply/Greenply/National ply/Kit ply as approved)
258MIRROR Removing broken mirror from its existing position and supply and fixingfor copper plated 5.5mm thick mirror mounted on new frame made out 12 mm thick ply wood (seven Nos of ply), type BB, BWR grade and covered by decorative mould and supported on 50mm X28mm frame all-round complete all as directed all as shown on drawing. (Make : Modiguard/Saint gobain/Atul as approved)
259SHELVES S&F for 5mm thick glass shelves in cabinet supported on glass holders including taking down broken shelves complete all as specified and shown on drawing. (Make : Modiguard/Saint gobin/Atul as approved)
260MAGNET CATCH S&F formagnet catch inside the cabinet to catch mirror frame including taking down unserviceable magnet catch all as specified on drawing.
261LEGS: Removing decayed each leg of dressing table of 38mm X 38mm from its existing position and replace the same with new leg made out well seasoned 1st class hard wood (Teak/Seasom) complete all as specified and directed.
262SIDE Removing decayed side from its existing position and replace the same with new side made out from 18mm thick veneered particle board (exterior grade) grade-I quality with one face teak and other face commercial veneer all as shown on drawing. (Make of Ply wood : Century Ply/Greenply/National ply/Kit ply as approved)
263POLHSHING TO TABLE DRESSING GENTS Removal of old existing worn out polish from exposed portion of wooden surface by any means of table dressing gents including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
264REPAIRS TO CHAIR DINING FOR THE FOLLOWING (DRG No.FD-MAP-II/05)
265FRONT LEG Removing of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak)all as shown on drawing.
266REAR LEG Removing of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
267FRONT RAIL Removing of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing .
268REAR RAIL Removing of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned1st class hard wood (Teak) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing
269SIDE RAIL Removing of each decayed side rail from its existing position and replace the same with new siderail made out from well seasoned 1st class hard wood (Teak) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing .
270REAR STIFFNER Removing of each decayed rear stiffenerfrom its existing position and replace the same with new rear stiffenermade out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
271STIFFNER Removing of each decayedstiffenerfrom its existing position and replace the same with newstiffenermade out from well seasoned 1st class hard wood (Teak) all as shown on drawing.
272HARD RUBBER/PVC RING Removing of each decayedhard rubber/PVC ring from its existing position of Chair dinningand replace the same with newhard rubber/PVC ring all as shown on drawing and directed by Engineer-in-Charge.
273SEAT Removing of decayed/wornout PVC seat from its existingposition and replace the same with new seat of size 4mmX10mm thick ribs molded long with single frameall as show on drawing and directed by Engr-in-Charge. (Make:Brite/Cello/Supreme/Nilkamal as approved)
274POLISHING TO CHAIR DINING Removal of old existing worn out polish from exposed portion of wooden surface by any means of chair dinningincluding preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge .
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail