Uttar Pradesh Power Transmission Corporation Limited-UPPTCL has published Installation Of New 400 Kv Bus Bar Protection Panels Inplace Of Old Electromechanical Panels Including Carriage Of Control Cables And Dismantling, Erection, Cabling, Termination Of Panels And Other Associated Works At 400 Kv S / S Sarojininagar, Luckno. Submission Date for this Tender is 15-06-2022. Electrification Work Tenders in Lucknow Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 07-Jun-2022 | Date Extended | Date | 15-06-2022 |
| Sl. No. | Item Description |
| 1 | Following works are to be carried out for installation of New 400 KV Bus-Bar Protection Panels including Dismantling (of old panels) Erection (of new panels), Cabling, Glanding, Termination and other associated works at 400 KV S/S Sarojininagar with all cost of men, mis. consumables, T&P etc. to complete the job satisfactorily as per direction of the Supervising Engineer :- |
| 2 | Safe Loading of following Control Cable of from various 400 KV and 220 KV Sub-Stations as mentioned below with due shifting, their safe carriage on Truck and Unloading, Shifting & Placing at designated place at 400 KV S/S Sarojininagar, Lucknow with all other associated works for satisfactory completion of the job: |
| 3 | 400 KV S/S Muradnagar-II (approx.distance upto 480Km) 5CX2.5SQMM Armoured Control Cable (05KM) |
| 4 | 400 KV S/S Moradabad (approx.distance upto 365Km) 5CX2.5SQMM Armoured Control Cable (02KM) |
| 5 | 400 KV S/S Sarnath (approx.distance upto 320Km) 7CX2.5SQMM Armoured Control Cable (06KM) |
| 6 | Dismantling of existing old 02 Nos. Bus Bar Protection Panels (Electromechnical type) and 02 Nos. Tertiary Reactor Protection Panels (not in service) after disconnection of all the control cables including recording of connection, removal of control cables with Glands, Cutting/Removal of Earthing, then Shifting the Panels with due care & safety to site store. (One Job each Panel) |
| 7 | Laying of following sizes Copper Control Cables (Provided by UPPTCL) in the Cable Trenches from new 400 KV Bus Bar Protection Panels to CT Junction Boxes, Bus isolators in Switchyard and Control/Relay Panels in Control Room etc. including Carriage of Cable Drums from Store to Site and Shifting back to Store and all other associated works to complete the job satisfactorily as per technical specification : |
| 8 | 5X2.5mm² size Control Cable |
| 9 | 7X2.5mm² size Control Cable |
| 10 | 10X2.5mm² size Control Cable |
| 11 | Erection of 04 Nos. New Numerical Type 400 KV Bus Bar Protection Panels (GE T&D make) comprising of Main and Trip Unit after shifting from site store with due care & safety to control room area with grouting and earthing. Followed by Inter-connection of above installed 400 KV Bus Bar Protection Panels with existing 400 KV Lines and Transformer Bays (CT Junction Boxes, Bus Isolator MOM Boxes in Switchyard & Control/Relay Panels in Control Room) using Control Cables (Provided by UPPTCL as per Cable Schedule including making holes in Base Plate, Glanding & Termination and Ferruling alongwith Preparation of Inter-connection Drawing and Commissioning of the Panel/Feeders in co-ordination with T&C wing including providing of 2 sets of Hard copies of as executed inter-connection Drawing (01 Job for each 400 KV Bay) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
