}

Annual maintenance and repairing At 132 Kv S / S Morta, 220 Kv S / S Madhuban Bapudham, 132 Kv S / S Govindpuram, 132 Kv S / S Lalkuan, 132 Kv S / S Rathi, 132 Kv S / S D.P.H., 132 Kv S / S U.P.S.I.D.C. Masuri Ghaziabad, ghaziabad-Uttar Pradesh

Uttar Pradesh Power Transmission Corporation Limited-UPPTCL has published Annual maintenance and repairing At 132 Kv S / S Morta, 220 Kv S / S Madhuban Bapudham, 132 Kv S / S Govindpuram, 132 Kv S / S Lalkuan, 132 Kv S / S Rathi, 132 Kv S / S D.P.H., 132 Kv S / S U.P.S.I.D.C. Masuri Ghaziabad. Submission Date for this Tender is 27-06-2022. Substation Tenders in ghaziabad Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

32382930
Annual maintenance and repairing At 132 Kv S / S Morta, 220 Kv S / S Madhuban Bapudham, 132 Kv S / S Govindpuram, 132 Kv S / S Lalkuan, 132 Kv S / S Rathi, 132 Kv S / S D.P.H., 132 Kv S / S U.P.S.I.D.C. Masuri Ghaziabad
Open Tender
Indian
Uttar Pradesh
ghaziabad
27-06-2022

Tender Details

Annual maintenance and repairing At 132 Kv S / S Morta, 220 Kv S / S Madhuban Bapudham, 132 Kv S / S Govindpuram, 132 Kv S / S Lalkuan, 132 Kv S / S Rathi, 132 Kv S / S D.P.H., 132 Kv S / S U.P.S.I.D.C. Masuri Ghaziabad

Key Value

Document Fees
INR 296 /-
EMD
INR 2000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Annual M&R At132 KV S/S Morta, 220 KV S/S Madhuban Bapudham, 132 KV S/S Govindpuram, 132 KV S/S Lalkuan, 132 KV S/S Rathi, 132 KV S/S D.P.H., 132 KV S/S U.P.S.I.D.C. Masuri Ghaziabad.
Sl. No. Item Description
1Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. (CSI No. 4.01)
2Clearing jungle including uprooting of rank vegetations,grass, bush, wood, trees and saplings of girth upto 30cm measured at a height of 1.0m above ground level and removal of rubbish upto a distance of 50m outside the periphery of UPPCL area cleared. (CSI No. 4.08)
3Concrete with 4cm gauge approved stone ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 12:6:1 in foundations & under floors including supply of all materials, labour and tools and plants etc. required for proper completion of work. (CSI No. 5.02)
4Cement concrete with 2cm gauge approved hard stone ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 3:1.5:1 including supply of all materials, labour,side shuttering if required and T&P etc. required for proper completion of work. (CSI No. 5.21)
5Precast cement concrete door sills, chaukhats boundary posts, shelves and similar small work with cement approved coarse sand (F.M. 1.8 to 2.5) and 2 cm gauge graded approved hard stone ballast in the proportion 1:1.5:3 excluding reinforcement but including fixig the same in position including cost of all other material, labor and T&P etc. (CSI No. 5.22)
6RCC work with cement approved coarse sand (F.M.1.8 to 2.5) and 2 cm gauge graded approved hard stone ballast like grainite, quartzite etcin proportion 1:1.5:3 in lintels or bends and sun shade of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire,including necessary centering and smooth shuttering, including cost of all other materials labour and T&P . (CSI No. 5.23)
7First class brick work in 1:4 cement and coarse sand (F.M1.8 to 2.5) mortar in foundation and plinth including supply of all materials, labour & T&P etc. required for proper completion of work (CSI No. 6.03)
8First class brick work in 1:4 cement and coarse sand (F.M.1.8 to 2.5) mortar in super structureincluding supply of all materials, labour & T&P etc. required for proper completion of work but for one brick thickness. (CSI No. 6.03+6.07+6.08)
9First class brick work in 1:4 cement and coarse sand (F.M.1.8 to 2.5)mortar in super structureincluding supply of all materials, labour & T&P etc. required for proper completion of work but half brick (CSI No. 6.03+6.07+6.08+6.09)
10Supply and fixing of 35 mm. thick Indian sal wood. fully glazed door and window shutter including supply and fixing ofwooden cleats and stoppers and including fixing and adjustment ofhinges bolts, locks, handles, springs and/or other fittings but excluding their supply and including fixing the glass panes with putty and necessary screws (Glass panes to be 4 mm thick.)(CSI No. 8.33)
11S/F Galvanized Mosquitos proof heavy quality iron wire gauge (14x24) over window frames and including supply of Country wood battens 8cm x 1cm. and including supply and fixing of necessary screws, all materials,labour and T&P etc. required for proper complete. (CSI No. 8.45)
12P/F fully Anodized aluminium fixed glazing with HINDALCO or equivalent extruded standard sections14gauge (2.41mm thick) of various cross sections and joints mitred and jointed as shown in drawing including providing & fixing 5.5 mm thick toughened glass with Neoprene beading & aluminium glazing clips all around. The minimum thickness of anodizing on all aluminium sections should be 20 microns with a (+/-) 2 microns tolerance . The rate should include the cost of fixing the aluminum frame on Teak wood frame or finished wall (RB/RCC/Masonry) surface by means of 80 mm long approved counter sunk screws provided at 500 mm c/c or part there of starting from 100 mm above the bottom in vertical member and 100 mm from both the ends of horizontal top and bottom member excluding cost of Teak frame but including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.52)
13Same as above CSI No. 8.52 but for openable window portion as shown in drawings, including cost of Aluminium hinges and all other fittingslike concealed tower bolts, handles etc of approved quality and including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.53)
14Same as above CSI No. 8.52 but for openable gate/door portion as shown in drawings including cost of hinges and Aluminium fittings like tower bolts, handles, stoppers, push plates, brass body with brass component 6 levers cocealed lock etc of heavy & approved quality and including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.54)
15S/Fixing of double action floor springs including cutting in floors / RCC slabs and grouting the same with C.C. & finishing the surface properly as and where required under aluminium doors as per direction of Engineer-in-charge. including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.55)
16Supply and fixing brass polished hydraulic door closure of equivalent approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work. (CSI No. 8.60)
17Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete. (a) L drops 16 mm dia x 300 long. (CSI No. 20.17a)
18Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete. (b)Tower bolts 10 mm dia x 250 mm long. (CSI No. 20.17b)
19Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete. (c)Tower bolts 10 mm dia x 100 mm long. (CSI No. 20.17c)
20Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete. (d)Iron hinges 100 mm size.12 gauge.thick (CSI No. 20.17d)
21Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete. (f) M.S. Handles 100 mm size (CSI No. 20.17f)
22Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other fittings but excluding their supply including all materials,labour & T&P etc. required for proper completion of work. (CSI No. 8.57)
23Providing and fixing false ceiling at all heights with integral densifiedr Armstrong false ceiling tiles of Size 595x595 x12 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as perBS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 SUB HEAD : 26- NEW TECHNOLOGIES AND MATERIALS 1632 mm reveal profilewhite/black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. 26.23.1 With 12 mm thick Armstrong MiniralFobre Sound Absorbing Sheet (CSI No. 28.30)
24Mild Steel or Iron work in heavy sizes such as trusses built up gates, door frames, record racks , roof work ,gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. (CSI No. 9.01)
25As in CSI 9.01 above but when steel will be provided by the department free of cost. (CSI No. 9.02)
26TMT or Tor steel in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured separately.(Steel shall be arranged by contractor) (CSI No. 9.03)
27As in CSI 9.03 above but when steel will be provided by the Department . (CSI No. 9.04)
28Providing and Fixing barbed iron wire fencing including stretching, fixing into the post including all labour, materials and T&P required for proper completion of work. the weight of hot dipped GI barbed wire having 12 SWG - 2 ply wires and 4 point ordinary barbs @ 150 mm (approx) C/C should be 100 gm per Meter. (CSI No. 9.07)
29Supply of 25 mm dia. M.S Anchor bolts (conforming to IS-266) 500 mm long with base plate (50x50x6 mm) welded with anchor bolts, including its threadng up to a length of 10 cm and galvanizing up to 15 cm from top. Also supply of a pair of galvanized standard nuts with threading including supply of 5 cm thick washer and cost of lobour matterial and T&P etc.Required for proper completion of work. (CSI No. 9.14)
30Fixing and grouting 25 mm dia M.S. Anchor bolt in proper alignment level and setout with the help of a template including supply of all labour T&P etc. reqd. for proper completion of the work. (labour rates only) . (CSI No. 9.15)
31Supply and fixing galvanised mosquito proof jali (16x24 gauge) with M.S. flat of 20 x 3 mm. size, on both sides screwed or welded to window or door frame. (CSI No. 9.18)
32Providing M.S. Frames work, rack etc for R.C.C. Trench covers and edging with M.S. angles and M.S reinforcement including cutting, bending and welding as per approved drawing. Therate is including cost of all labour, materials etc. as required for proper completion of the work.(CSI No. 9.20)
33Placing / Fixing of template in position, level and alignment for grouting of Anchor bolt in auxiliary structure (labour rate only). (CSI No. 9.32)
34Spreading over leaky roofs with bitumen paints at 0.45 Kg per sq.m. including sweeping, cleaning the roof with brushes, heating of the paints upto the required temperature,pouring it on the surface, spreading of necessary quantity of approved coarse sand 1 cft. per 100 sft. and including supply of all materials, labour and T&P etc. required for proper completion of the work.(CSI No (10.05)
35Supply and fixing 50 mm dia 150 mm long PVC pipe in chhajja as spout including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 10.11)
3612 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.07)
37Add for extra labour to all items of plaster if done in ceiling. (CSI No. 11.10)
382 cm. thick cement plaster in dado or skirting in 1:2 consisting of one part of cement and two parts of approved coarse sand laid in panels finished with 3mm.floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials, labour & T&P etc. required for proper completion of the work. (CSI No.11.13)
39S/mixing approved water proofing compound / hardner (CICO,DR FIXIT etc) in cement mortar in plaster or concrete work in the proportion as recommended by the manufacturer . (CSI No. 11.15)
403 mm thick floating coat of neat cement finish including supply of all materials,labour and T&P etc. required for proper completion of the work.( cement consumtion 0.044 bag/Sq.m.) (CSI No. 11.20)
41Applying two coat of Dr. Fixit pidicrete URP with cement slurry of one parts of Dr. Fixit pidicrete URP (covering area of urp - 2.00 to 2.2 Sqm/Kg) and 1.5 parts of cement on Horizontal and vertical damp surface. Before application clean the surface with wire brush or scrubber to remove hidden dirt, loose particles, laintance and dust, degrease the surface by using suitable solvent thoroughly saturated the surface with portable water but at the time of application water should not be accumulated at any place as per direction of E/I including supply of all materials , labour and T&P etc required for proper completion of work. (NSI, SOR 2020 CSI No 26.64)
424.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC (CSI No. 12.04)
43Supply and Laying08 mm thick glazed floor tiles of Somany, Johnson or equivalent make laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and T&P etc.required for proper completion of the work. (CSI No. 12.11)
44First class brick on edge floor-laid in cement mortar consisting of one part of cement and six parts of coarse sand and pointed with cement mortar 1:2 over and including all materials, labour, T&P etc.required for proper completion of work. (CSI No. 12.15)
45Providing and laying floor of 8 mm thick vitrified tiles in flooring or skirting of approved brand (Bell, Johnson or equi. make) size of 600x600 mm of approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work. (CSI 12.18)
46Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint "Luxol" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. (CSI No. 13.01)
47As in CSI 13.01 above but for every coat after first coat. (CSI No. 13.02)
48As in CSI 13.01 above but for every coat on previously painted old wood or iron work including its sand papering,rubbing and cleaningas required, for proper completion of work. (CSI No. 13.03)
49One priming coat and one coat oil bound acrelic distemper on new work including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 13.08)
50As in CSI 13.08 but for every coat after the first coat. (CSI No. 13.09)
51As in CSI 13.08 but for every coat on previously old oil bound distempered surface. (CSI No. 13.10)
52Applying BIRLA PUTTY or equivalent putty on previousaly birla putty over one coat of water based cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work.(CSI No.13.21)
53Painting one coat with APEX or equivalent brand weather coat paint on new wall( well prepared with birla putty and one coat of primer of ICI or equivalent which shall be paid separately) including thorough washing with water including cost of all material labour & T&P required for proper completion of work. (CSI No. 13.22)
54Same as in CSI no 13.22 above but for every additional coat of APEX or equivalent brand weather coat paint. (CSI No. 13.23)
55Same as in CSI 13.22 but for each coat of APEX or equivalent brand weather paint on previously treated surface. (CSI No. 13.24)
56Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metres. (CSI No. 15.01)
57Dismantling reinforced cement concrete or reinforced brick work, including stacking of dismantled materials as directed by the Engineer-Incharge within a distance of 60 metres. (CSI No. 15.03)
58Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer In-charge within a distance of 60 metres. (CSI No. 15.05)
59As in CSI 15.05 but for floors to be stone flagged or tiled floor. (CSI No. 15.06)
60Dismantling doors or window leaves including stacking of materials as directed by the Engineer I/C within a dist. 60 M. (CSI No. 15.09)
61Dismantling doors and windows chowkhats including stacking of materials as directed by Engg-in-Charge within a distance of 60 meters. (CSI No. 15.10)
62Dismantling existing plaster including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M. (CSI No. 15.11)
63Scrapping old white or colour wash or distemper including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M. (CSI No. 15.12)
64Repair to plaster or pointing in patches including removal of old plaster racking out joints to 1 cm.(3/8") depth,watering the area and then replastering or reappointing with the same mortar or proportion of mortar as the existing surface including supply of all materials, labour and T&P etc. required for proper completion of the work . (CSI No. 20.02)
65Repair to 2.5 cm (1") cement concrete floor in patches including up to 10 cm.(4") depth renewing 8 cm.(3") base concrete consisting of one part cement, 4 parts aproved coarse sand and 8 parts of 4 cm.(1.5") gauge brick ballast as in C.C.floor consisting of one part cement 2 parts approved coarse sand and 4 parts approved stone grit including supply of all materials.labour and T&P etc. required for proper completion of the work . (CSI NO 20.03)
66Easing door and windows. (CSI No. 20.05)
67Brick work in foundation & plinth with old dismantled bricks (supplied by department free of cost) and coarse sand of (F.M.1.8 to 2.5) mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete. (CSI No. 6.18)
68Fixing panes of glass with and including putty brads and including supply of all materials,labour and T&P etc. required for proper completion of the work but excluding cost of glass. (CSI No. 20.07)
69As in CSI No.20.07 above but with wooden beading. (CSI No. 20.08)
70Labour for fixing door bolts or hinges or tower bolts or hasp and staples or handles etc.to doors and window. (CSI No. 20.10)
71Cleaning of septic tank including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work.(CSI No. 20.12)
72Same as in CSI No.20.12 above but for inspection chamber..(CSI No. 20.13)
73Cleaning of main drain or width more than 300 mm.including disposal of waste refuses sludge out side the boards area including washing and cleaning by clean water completely as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work. (CSI No. 20.14)
74Same as above in CSI No. 20.14 but for drain of width less than 300 mm. (CSI No. 20.15)
75Disposal of rubbish / debris out side the UPPCL area as per direction of Er/in- charge including cartage, labour and materials, T&P etc. required for proper completion of the work. (No. deduction for voids shall be made). (CSI No. 20.16)
76Cleaning and opening of chocked W.C./ bath / kithchen pipe line including opening and refixing of chamber cover including washing etc. complete.(Analysis based on NBO - 11 25.020.(CSI No. 20.19)
77Opening, cleaning, overhauling, oiling and greasing of defective rolling shutter and also re setting of its springs for its smooth functioning including cost of all materials, labour and T&P etc.( Approx. size of shutter 2x2.5) (CSI No. 20.20)
78S/laying chicken mesh of (20 mm.)hexagonal heavy quality over roofs of joints of roof as per direction of the Engineer - in - charge.(CSI No. 20.21)
79Polishing of marble floor by cleaning with carborandum stone after washing with tartre cleaning powder etc. and finally with French mansion polish including supply of all materials, labour and T&P etc. required for proper completion of the work.(CSI No. 20.22)
80Cleaning of existing pipe line of different dia. ranging from 4" to 2" dia. including digging trenches and refilling, opening of pipes, cleaning of pipes, cutting, threading, if required fixing and including making good the road, wall etc as directed by the engineer I/C.(CSI No. 20.26a)
81Cleaning of existing water pipe line of different dia up to 2" dia including digging trenches and refilling,opening and cleaning of pipes,cutting,threading,if required fixing and including making good the road and wall etc. as directed by the Engineer in charge.(CSI No. 20.26b)
82Cleaning of R.C.C. over head tank up to capacity of one lac. Liters and chlorinating with bleaching power mixed to water as per direction of Engineer - in - charge complete.(CSI No. 20.27)
83Supply and mixing bleaching powder in over head tank as required or as directed by Engineer - in - charge.(CSI No. 20.29)
84Dismantling and re-laying of dry B.O.E. floor including cost of all labour and T&P required forproper completion of work.(labour rates only) (CSI No. 15.18)
85Attending to petty maintenance service like plumbingservice,welder service, mansion service and carpenter servicerequired as belowJob attending by one no.Plumber/welder/mason/carpenter with oneno. helper per hour or part of an hour.(CSI No. 22.18)
86Cleaning and sweeping of roof of residence as and when requiredincluding uprooting of rank vegetation and disposal of thegarbage upto 50 M.(CSI No. 22.20)
87Cleaning of toilets of non-residential buildings including costof detergent powder,horpic phenyl and suitable acid etc. asrequired for proper completion of the work.(CSI No. 22.22)
88Opening of Aluminium door shutter and refixing the same after replacement of new rubber beading and screws completeExcluding cost of Al. pipe and Glass but including cost of Rubber beading and Screw. Cost including all labour, material and T&P required for proper completion of work.(NSI, SOR 2020 CSI No 26.148)
89Providing and fixing 15mm dia B-class Jindal, JTC, ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour T&P etc complete. (CSI No 26.01a)
90Providing and fixing 20 mm dia B-class Jindal, JTC, ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour T&P etc complete. (CSI No 26.01b)
91Providing and fixing 25 mm dia B-class Jindal, JTC, ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour T&P etc complete. (CSI No 26.01c)
92Providing and fixing 15 mm dia B-class Jindal, JTC, ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also includes external G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour T&P etc complete. (CSI No 26.02a)
93Providing and fixing 20 mm dia B-class Jindal, JTC, ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also includes external G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour T&P etc complete. (CSI No 26.02b)
94Providing and fixing 25 mm dia B-class Jindal, JTC, ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also includes external G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour T&P etc complete. (CSI No 26.02c)
95Providing and fixing 32 mm dia B-class Jindal, JTC, ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also includes external G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour T&P etc complete. (CSI No 26.02d)
96Providing and fixing 40 mm dia B-class Jindal, JTC, ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also includes external G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour T&P etc complete. (CSI No 26.02e)
97Providing and fixing 50 mm dia B-class Jindal, JTC, ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also includes external G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour T&P etc complete. (CSI No 26.02f)
98Providing and fixing 65 mm dia B-class Jindal, JTC, ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also includes external G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour T&P etc complete. (CSI No 26.02g)
99Providing and fixing 80 mm dia B-class Jindal, JTC, ISI marked G.I. Pipe complete with G.I. specials as bends, tee, socket cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also includes external G.I. fitting where required, cutting and making good the walls etc. including cost of all materials, labour T&P etc complete. (CSI No 26.02h)
100Providing and fixing CP BRASS BIB COCK15 mm dia. HEAVY QUALITY ( 400gm) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16a)
101Providing and fixing CP BRASS BIB COCK15 mm dia. HEAVY QUALITY ( 200gm) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16b)
102Supply and fixing of 15 mm dia C.I. / PVC bib-cock including replacing of old bib cock complete, labour and TandP etc. required for proper completion of the work.(CSI No 26.13c)
103Providing and fixing CP BRASS ANGLE VALVE 15 mm dia. HEAVY QUALITY ( 400gm) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16i)
104Providing and fixing CP BRASS STOP COCK 15 mm dia. HEAVY QUALITY ( 400gm) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16c)
105Providing and fixing CP Piller Cock HEAVY QUALITY ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16j)
106Providing and fixing full way 15mm dia G.M. gate valvewith wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.04a)
107Providing and fixing full way 20mm dia G.M. gate valvewith wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.04b)
108Providing and fixing full way 25mm dia G.M. gate valvewith wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.04c)
109Providing and fixing full way 50 mm dia G.M. gate valvewith wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.04f)
110Providing and fixingP.V.C. connection pipe 450 mm long x 15 mm dia. with 2 brass units ISI mark heavy quality including supply of all materials, labour and T and P etc. required for proper completion of work(CSI No 26.09b)
111Providing and fixing PVC BALL FLOAT VALVE 15 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.06a)
112Providing and fixing PVC BALL FLOAT VALVE 20 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.06b)
113Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completion of work. (CSI No. 26.12)
114Providing and fixing of 110 mm dia PVC pipe 6 Kg/ Sq.cm forwith special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.17)
115Providing and fixing first quality white glazed "Orissa" pattern W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out "P" trapincluding supply of all materials,labour and T&P etc.complete. (CSI No. 27.01)
116Providing and fixing first quality white glazed European Type W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out "P" trapincluding supply of all materials,labour and T&P etc.complete. (CSI No. 27.02)
117Providing and fixing PLASTIC SEAT COVERCOMPLETE WITH PLASTIC LID FOR EUROPEAN TYPE WC ISI MARKEDincluding supply of all materials,labour and T&P etc.complete. (CSI No. 27.04)
118Providing and fixing 550X400 mm wash hand basin of white glazed earthern ware first quality I.S.I. marked (Hindustan,Neycer / Cera make) including supply of all materials, labour and T&P etc. required for proper completion of the work.(CSI No. 27.08)
119Providing and fixing Stainless Steel sink 610x450x200 mm Heavy Quality( ISI MARKED ) includingall materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.26)
120Providing and fixing front 465mm x 355mm x 265mm size lipped front urinal basin of white glazed earthen ware first quality ( Hindware,Neycer make) I.S.I. marked including supply of all materials, labour, T&P etc. required for proper completion of the work (CSI No 27.05)
121Providing and fixing600mm x 450mm bevelled edge mirror ofAtul,Kiran makeglass with Indian Polish 6.50 mm thick complete back of 600mm x 450mm x 6mm hard board sheet fixed to wooden cients with C.P. brass screws and washers icluding supply of all materials, labour, T&P etc. required for proper completion of work.(CSI No 27.15)
122Providing and fixing 10 litres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.12)
123Supply and fixing 100mm PVC Nahani Trap India make of heavy approved quality complete with CI grating,includingsupply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 27.21b)
124Providing and fixing 100 mm dia PVC "P" or "S" trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.) (CSI No. 27.24)
125Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials, labour, T&P etc. required for proper completion of work.(CSI No 27.19)
126Providing and fixing CI GRATING 100 mm dia includingall materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.25)
127Providing and fixing in position 32 mm. dia P.V.C. flush pipe. for W.C. with unions, bends etc. including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.13)
128Providing and fixing in position 32 mm. dia P.V.C.WASTE PIPE FOR WASH BASIN. including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.14)
129Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. (CSI No. 28.20)
130Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. (CSI No. 28.26)
131Hiring charge of Tyre mounted excavater (JCB etc.) including cost of fuel along wuth Driver/Operatoradd 10% CP (CSI No 2.21 h )
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail