Military Engineer Services-MES has published Repair/ Replacement Of Steel Furniture, Officer Table, Clerk Table, Revolving Chair, Almirah And Other Connected Steel Furniture Works At Af Stn Manauri.. Submission Date for this Tender is 20-06-2022. Steel Furniture Tenders in manauri Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 02-Jun-2022 | Corrigendum | BOQ | 13-06-2022 |
| 2 | 13-Jun-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-06-2022 |
| Sl. No. | Item Description |
| 1 | Chair tubular steel with Arms (FD-75):Taking out unserviceable seat from chair tubular steel with Arms and S&F new seat made of seasoned 1st class hard wood shisham canned with 2 to 2.5mm wide plastic cane half round type as approved by Engineer-in-charge as per Godrej pattern including painting with synthetic enamel paint 1st quality complete all as specified, shown in drg and directed. |
| 2 | Ditto all as per iten No 1.00 above but back |
| 3 | Taking out unserviceable hand rest from chair tubular steel with Arms and S&F new hand rest made of 1st class hard wood shisham of size 45x25mm, 440mm long duly painted in required shade matching with the existing shape and size complete all as specified and directed. |
| 4 | Table office Officer steel (FD-1002 & 1003) : Taking out U/S top from steel table office for officers and S&F new top made of 18 mm thick pre laminated MDF board exterior grade conforming to grade -1 & type III(PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the top complete as shown in drg & directed by Engineer-In-Charge. |
| 5 | Preparation of old painted surface of Steel table office for Officers sanding by emery /sand paper, removing dirt or dusts and denting if required, filling depression with steel putty and apply two coats of synthetic enamel paint OG colour by spray painting complete as directed by Engineer-in-Charge. |
| 6 | Replacement of old broken unserviceable locks for Steel table with supply & fixed new locks 4 lever Godrej pattern with double keys fixed with suitable steel screw or nuts complete as directed by Engineer-in-Charge. |
| 7 | Repair & adjusting the frame of old steel drawers of steel table office for Officers for smooth functioning by denting or by welding and apply one coat of red oxide primer on steel surface of dents/ repaired portion complete all as shown on drawing or as directed by Engineer-in-Charge. |
| 8 | Supply & fixed steel conduits 16 gauge 25 mm square hollow tubes wherever worn out or damage portion by welding and apply one coat of red oxide primer on steel surface complete all as shown on drawing or as directed by Engineer-in-Charge. |
| 9 | Supply & fixed in replacement rubber shoes of superior quality from legs of table office clerk steel to match the existing & fitted to table for adjusting the levels complete as shown on drawings & as directed by Engineer-in-Charge. |
| 10 | Chair revolving office officers high back with PU arm : Taking out unserviceable caster wheel from any type of chair revolving and S&F new caster wheel of different type as per trade pattern matching with the existing shape & size and as directed Engineer-in-Charge. |
| 11 | Taking out unserviceable base from chair revolving and S& F new base as per existingtrade pattern and making the chair functional complete all as directed Engineer-in-Charge. |
| 12 | Taking out unserviceable tapestry clothfrom seat & back of chair revolving and S&F new tapestry cloth of approved quality & shade including replacement of foam cushion 100mm thick and plywood 8mm thick etc. complete all as per existing trade pattern and directed by Engineer-in-Charge. |
| 13 | Taking out unserviceable hand rest from chair revolving and S&F new PVC/fibre hardrestdifferentsizeofas per trade pattern matching with the existing hand rest all as directed by Engineer-in-Charge. |
| 14 | Taking out unserviceable Gas cylinder/lifter from any type of chair revolving andS&F new gas cylinder/Lifter as required as per trade pattern and making the chair complete functional all as directed by Engineer-in-Charge. |
| 15 | Computer chair revolving (ICF 213, C-22, C-27 & C-28) : Taking out unserviceable caster wheel from any type of chair revolving and S&F new caster wheel of different type as per trade pattern matching with the existing shape & size and as directed Engineer-in-Charge. |
| 16 | Taking out unserviceable base from chair revolving and S& F new base as per existingtrade pattern and making the chair functional complete all as directed Engineer-in-Charge. |
| 17 | Taking out unserviceable tapestry clothfrom seat & back of chair revolving and S&F new tapestry cloth of approved quality & shade including replacement of foam cushion 100mm thick and plywood 8mm thick etc. complete all as per existing trade pattern and directed by Engineer-in-Charge. |
| 18 | Taking out unserviceable hand rest from chair revolving and S&F new PVC/fibre hardrestdifferentsizeofas per trade pattern matching with the existing hand rest all as directed by Engineer-in-Charge. |
| 19 | Taking out unserviceable Gas cylinder/lifter from any type of chair revolving andS&F new gas cylinder/Lifter as required as per trade pattern and making the chair complete functional all as directed by Engineer-in-Charge. |
| 20 | Book case for glass door steel 4DR : Taking down of old damaged/unserviceable steel shelves of book shelf open , steel and S&F of new 1mm thick MS shelves with suitable nuts & bolts complete all as specified and directed. |
| 21 | Taking down of old existing broken/unserviceable glazed door shutter and S&F new glazed door shutter made 2mm thick MS steel complete all as specified and directed. |
| 22 | M&L for preparation of existing surfaces by emery paper and painting the surface by spray painting with two coats of synthetic enamel olive Green paint of approved quality complete all as specified and directed. |
| 23 | Taking down of old damaged/unserviceableglass of book case and S&F new 4mm thick glass of book case as shown on drg complete all as specified and directed. |
| 24 | Table office clerk steel (FD-84 & 1004) : Taking out U/S top from Table office clerk steel and S&F new top made of 18 mm thick pre laminated MDF board exterior grade conforming to grade -1 & type III(PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the top complete as shown in drg & directed by Engineer-In-Charge. |
| 25 | Taking out unserviceable locks from table office clerk steel drawers and S&F new brass lock 4 leaver with duplicate key of approved quality complete all as shown in drg and directed. Make of lock : Godrej. |
| 26 | Taking out unserviceable rubber shoes from leg of table office clerk steel and S&F new rubber shoes of best quality matching with the existing shoes all as directed. |
| 27 | Denting and welding of dislocated portion of table office clerk steel where ever required and readjusting of the frame complete as per drawing including repair of drawers where ever required all as shown on drg and directed by Engineer-in-charge. |
| 28 | preparation of the old painted surfaces of the table office clerk steel removing by emery paper of all dirt & dust etc and filling with putty and spray painting with two coats synthetic enamel olive green paint of approved 1st quality (external & internal) complete all as specified and directed by Engineer -in- charge. |
| 29 | TABLE 900X600X760 W/O DRAWER STEEL FD 1009 Taking out U/S top from table 900x600x 760 mm and S&F new top made of 18 mm thick pre laminated MDF board exterior grade conforming to grade -1 & type III(PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the top complete as shown in drg & directed by Engineer-In-Charge. |
| 30 | preparation of the old painted surfaces of the table900x600x 760 mm removing by emery paper of all dirt & dust etc and filling with putty and spray painting with two coats synthetic enamel olive green paint of approved 1st quality (external & internal) complete all as specified and directed by Engineer -in- charge. |
| 31 | Taking out unserviceable rubber shoes from leg oftable900x600x 760 mmand S&F new rubber shoes of best quality matching with the existing shoes all as directed. |
| 32 | Almirah Large 1/2 hanging 1/2 shelves steel M & L derusting denting, cleaning including repairing of deshaped portion of Almirha large 1/2 hanging 1/2 shelves steel and applying one coat of red oxide primer on damages painted surfaces including preparation by applying putty and one coat of synthetic enameled paint colour and shed as approved by engr in charge (Ist quality) on inside and out side including shelves by spry machine painting complete all as directed Engineer - in -charge. |
| 33 | S&F in replacement of old existing broken/unserviceable door handles of Almirah large 1/2 hanging 1/2 shelves steel 100 mm long CI chromium plated of approved make complete with nuts & pins all as specified shown on drg and directed by Engineer - in -charge. |
| 34 | Replacement of old damaged /damaged legs of Almirha large 1/2 hanging 1/2 shelves steel with S & Fof new legs out of 1.6 mmthick M S Sheet complete and with suitable clamps all as specified and shown on drgall as directed by Engineer - in -charge. |
| 35 | Replacement of old existing broken /unserviceable locks (Godrej pattern )of any description and in anyposition with S & F New locks, 6 lever with doublekeys fixing with suitable nuts including repair of locking device complete all as specified shown on drg and directed Engineer - in -charge. |
| 36 | Replacement of old damaged / unserviceableshelves ofAlmirah large 1/2 hanging 1/2 shelves steel with S & Fof new shelves madeout of 1.6 mmthick M S Sheet complete and with suitable clamps all as specified and shown on drgall as directed by engineer - in charge. |
| 37 | Replacement of damaged /broken locking assemblyand S & F of new locking assembly made out of 8 mm rod round steel all as specified and shown on drawingall as directed by Engineer - in -charge. |
| 38 | Replacement of damaged /broken hanging rodand S & F of new hanging rod made out of 25 mm rod round steel and clamps all as specified and shown on drawingall as directed by Engineer - in -charge. |
| 39 | Almirah Medium 1/2 hanging 1/2 shelves steel : M & L derusting denting, cleaning including repairing of deshaped portion of Almirha Medium 1/2 hanging 1/2 shelves steel and applying one coat of red oxide primer on damages painted surfaces including preparation by applying putty and one coat of synthetic enameled paint colour and shed as approved by engr in charge (Ist quality) on inside and out side including shelves by spry machine painting complete all as directed Engineer - in -charge. |
| 40 | S&F in replacement of old existing broken/unserviceable door handles of Almirha Medium 1/2 hanging 1/2 shelves steel 100 mm long CI chromium plated of approved make complete with nuts & pins all as specified shown on drg and directed by Engineer - in -charge. |
| 41 | Replacement of old damaged /damaged legs of Almirha medium 1/2 hanging 1/2 shelves steel with S & Fof new legs out of 1.6 mmthick M S Sheet complete and with suitable clamps all as specified and shown on drgall as directed by Engineer - in -charge. |
| 42 | Replacement of old existing broken /unserviceable locks (Godrej pattern )of any description and in anyposition with S & F New locks, 6 lever with doublekeys fixing with suitable nuts including repair of locking device complete all as specified shown on drg and directed Engineer - in -charge. |
| 43 | Replacement of old damaged / unserviceableshelves ofAlmirha medium 1/2 hanging 1/2 shelves steel with S & Fof new shelves madeout of 1.6 mmthick M S Sheet complete and with suitable clamps all as specified and shown on drgall as directed by engineer - in charge. |
| 44 | Replacement of damaged /broken locking assemblyand S & F of new locking assembly made out of 8 mm rod round steel all as specified and shown on drawingall as directed by Engineer - in -charge. |
| 45 | Replacement of damaged /broken hanging rodand S & F of new hanging rod made out of 25 mm rod round steel and clamps all as specified and shown on drawingall as directed by Engineer - in -charge. |
| 46 | Almirah large steel with Shelves (FD-67,1031) M & L derusting denting, cleaning including repairing of deshaped portion of Almirah large steel with shelves and applying one coat of red oxide primer on damages painted surfaces including preparation by applying putty and one coat of synthetic enameled paint colour and shed as approved by engr in charge (Ist quality) on inside and out side inlcuding shelves by spry machine painting complete all as directed Engineer-in-Charge. |
| 47 | S&F in replacement of old existing broken/unserviceable door handles of Almirah medium 100 mm long CI chromium plated of approved make complete with nuts & pins all as specified shown on drg and directed by Engineer-in-Charge. |
| 48 | Replacement of old damaged /damaged legs of Almirha large with S & Fof new legs out of 1.6 mmthick M S Sheet complete and with suitable clamps all as specified and shown on drgall as directed by Engineer - in -charge. |
| 49 | Replacement of old existing broken/ Unserviceable locks (Godrej pattern) of any description and in any position with S & F New locks, 6 lever with double keys fixing with suitable nuts including repair of locking device complete all as specified shown on drg and directed Engineer-in-Charge. |
| 50 | Replacement of old damaged / Unserviceable shelves of almirah large with S & F of new shelves made out of 1.6 mm thick M S Sheet compelte nad with suitable clamps ll as specified and shown on dr all as direted by Engineer-in-Charge. |
| 51 | Replacement of damaged / broken locking assembly and S & F of new locking assembly made out of 8 mm rod round steel all a specified and shown on drawing all as directed by Engineer -in-Charge. |
| 52 | Almirah medium steel with Shelves (FD-247,1032): M & L derusting denting, cleaning including repairing of deshaped portion of Almirah Medsteel with shelves and applying one coat of red oxide primer on damages painted surfaces including preparation by applying putty and one coat of olive green synthetic enameled paint (Ist quality) on inside and out side including shelves by spry machine painting complete all as directed Engineer-in-Charge. |
| 53 | Replacement of old existing broken / unserviceable locks (godrej pattern) of any description and in any position with S & F New locks, 6 lever with double keys fixing with suitable nuts including repair of locking device complete all as specified shown on drg and direted Engineer-in-Charge. |
| 54 | S & F in replacement of old existing broken/unserviceable door handles of Almirah medium 150 mm (Godrej pattern) lonjg CI chromium plated of approved make complete with nuts & pins all as specified shown on drg and direted by Engineer-in-Charge. |
| 55 | Replacement of old damaged / damaged legs of almirah medium with S & F of new legs out of 1.6 mm thick M S Sheet complete an with suitable clamps all as specified and shown on drg all asdirected by Engineer-in-Charge. |
| 56 | Replacement of old damaged /unserviceable shelves of almirah medium with S & F of new shelves made out of 1.6 mm thick M S Sheet complete and withy suitable clamps all as specified and shown on drg all as directed by engineer-in-Charge. |
| 57 | Replacement of damaged / broken locking assembly and S & F of new locking assemby made out of 8 mm rod round steel all as specified and shown on drawing all as directed by Engineer-in-Charge. |
| 58 | Chair Visitors V-020 ,V29 : Taking out unserviceable tapestry cloth from seat & back of chair visitor and S&F new tapestry cloth of approved quality & shade including replacement of foam cushion not less than 60mm thick, 32 density and plywood 8mm thick etc. complete all as per existing trade pattern and directed by Engineer-in-Charge. |
| 59 | Denting, cleaning, including repairing of chair visitor and applying one coat of red oxide primer on damage painted surfaces including preparation of surface and one coat of synthetic enameled paint colour and shed as approved by engineer in charge (Ist quality) complete al as directly Engineer-in-Charge. |
| 60 | Chair PVC with cusion : Taking out unserviceable tapestry cloth from seat & back of chair PVC with custion and S&F new tapestry cloth of approved quality & shade including replacement of foam cushion not less than 60mm thick, 32 density in seat & back complete all as per existing trade pattern and directed by Engineer-in-Charge. |
| 61 | Chair writing supreme orate: Taking out unserviceable tapestry cloth from seat & back of chiar writing supereme orate and S&F new tapestry cloth of approved quality & shade including replacement of foam cushion not less than 60mm thick, 32 density in seat & back complete all as per existing trade pattern and directed by Engineer-in-Charge. |
| 62 | Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix "B" to Particular specifications as approved by AGE (I) AF manauri |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
