}

Provision Of Renovation Of Auditorium In Swaran Jayanti Bhawan, Sspl, Delhi => Limited, timarpur-Delhi

Defence Research And Development Organisation -DRADO has published Provision Of Renovation Of Auditorium In Swaran Jayanti Bhawan, Sspl, Delhi => Limited. Submission Date for this Tender is 11-06-2022. Auditorium Construction Tenders in timarpur Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

32321590
Provision Of Renovation Of Auditorium In Swaran Jayanti Bhawan, Sspl, Delhi => Limited
Limitted
Indian
Delhi
timarpur
11-06-2022

Tender Details

Provision Of Renovation Of Auditorium In Swaran Jayanti Bhawan, Sspl, Delhi => Limited

Key Value

Document Fees
Refer document
EMD
INR 207410.0 /-
Tender Value
Refer document

BOQ Items

NAME OF WORK: PROVISION OF RENOVATION OF AUDITORIUM IN SWARAN JAYANTI BHAWAN, SSPL, DELHI
Sl. No. Item Description
1Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :. Make: Pidilite, Sika, FOSROC
2Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:
3With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
4Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: Make: Pidilite, Sika FOSROC
5With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
6Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. Make: Pidilite, Sika, FOSROC
7Supplying chemical emulsion in sealed containers including delivery as specified. Make: Pidilite, Sika, FOSROC
8Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
9Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
10Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
11Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Make: Birla wall care, JK wall putty
12Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: Make: ASIAN, BERGER, NEROLAC
13New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).
14Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Make: TISCO, JSW, SAIL, RINL
15Thermo-Mechanically Treated bars of grade Fe-500D or more.
16Distempering with oil bound washable distemper of approved and manufacture to give an even shade : Make:ASIAN, BERGER, NEROLAC
17New work (two or more coats) over and including water thinnable priming coat with cement primer
18Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. Make: Prince, Supreme
19110 mm diameter
20Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Lighteflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’.
21The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in falseceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. Make: Armstrong, Decosonic
22With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6
23Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.
24intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long,the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : Make: Saint Gobain, Lafarge, Armstrong, India Gypsum, Vans Gypsum
2512.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks).
26Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto & above plinth Make: ACC, Ambuja, Ultratech cement
27Concrete of M25 grade with minimum cement content of 330 kg /cum
28Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
29Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
30Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
31Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Make: Prince, Supreme
32Bend 87.5° 110 mm bend.
33Shoe (Plain) 110 mm Shoe.
3425 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with: Second class teak wood
35Providing and fixing 50 x 20 mm wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :
36Providing and fixing GIGyp steel ultra frame work for wall panelling as per design drawing consisting of floor channel of size 50x32x32 x0.5mm thick at bottom and top fixed with 35 mm nylon sleeves and 35 mm screw. Further fixing GI stud 48x34x36x0.5 mm thick @600mm C/C vertically. The framework to be filled with 50mm 1000GSM non-woven thermal bonded polyester wadding ( Make Nowofill / mikasha/ vibrant) held in position with 18 mm GI checken mesh of 26SWG with drive all screws and oversize washers. Finally fixing over it horizontally 80x26x51x0.5 mm thick G.I. Gyp ceiling section placed @600mm C/C or wherever required as per design drawings. The frame to be fixed to the walls by means of angle holdfasts or cleats of required size complete with expandable anchor fasteners of 65x10mm dia fixed on each vertical member @1000mm C/C .
37Providing & laying at all heights 25mm thick thermal bonded non woven polyester wadding of 800GSM behind the perforated gypsum board.
38Providing and fixingcommercial ply of required thickness for wall lining with necessary screw, priming coat on un-exposed surface complete as per drawing and direction of Engineer-in-Charge. Recomended Make : Duro , Century , Merino . The ply to be fixed to the existing GI frameowrks ( Frameworks to be paid separately) at all heights. The work shall be executed as per drawings ,specifications & instructions of engineer in charge. (a):- 12mm thick commercial ply having approx 18% perforation done randomly with 8mm & 12mm dia holes to achieved required NRC values.The work shall be executed as per drawings specifications & instructions of engineer in charge.
39Providing & Fixing decorative high pressure 1.0 mm thick. laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
40Providing and applying two coats of fire retardant paint on cleaned wood / ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant.
41Skirting and borders :- Providing and fixing 19mm Com Board with 1mm laminate and edge tape complete. The work shall be executed as per drawings ,specifications & instructions of engineer in charge.
42Wooden Flooring :- Provifing & fixing 15mm Engineered wood as selected of Mikasa ( greenlam) compete with edge/ step trims etc as required.
43Providing & fixing of 2 No. staggered layers 12mm thick marine ply of approved make like century, Duro, Green Merino, fixed to Sal wood frame workof size 600 mm c/c both ways . The sal wood framework to be supported on 150x150x5mm neoprene pads & held in position by 35x35x5 mm angle cleats of 150mm length at 1200 mm centres. The wooden framework to be filled with 25mm thick thermal bonded polyster wadding mikron fiber of 800 gm/sqm (Make: Mikasha/ Nowofill / Vibrant)held in position with 18mm 24 SWG chicken mesh fixed on the bottom of the wooden framework with necessary screws and washers.The cleats to be given two or more coats of zinc chromate primer. The cleat to be prewelded to the base MS tubular framework & screwed tothe wooden framework with necessary screws.The work shall be executed as per drawings ,specifications & instructions of engineer in charge.
44Providing and fixing first class teakwood lipping/moulded beading ormolding of size 50x25mm fixed with wooden adhesive of approved quality and screws/nail on external edges of stage complete with polishing indesired shade as required .The work shall be executed as per drawings ,specifications & instructions of engineer in charge.
45Providing and fixingofFire retardant fabric design matte (make RSWM/Banswara Syntex / Comrade)having weight not less than 350 gms/sqm glued over 25mm thick acoustic panel of 1800 GSM non woven polyester wadding of (Mikasha/ Vibrant) to be fixed over 12mm thick perforated commercial ply( Comm. Ply shall be paid separately ). The ply to be fixed over the GI frame work (Note: framework to be paid for seperetly). The fabric to be stretched in 12x38mm UPVC gripper fixed @ 1200mm C/C & at top & bottom / wherever required as per design drawings. The gripper to be fixed over 12mm thk & 75mm wide ply strips fixed @ 1200mm c/c or as required as per the design drawings. All complete as per drawings and as per direction of Engineer-in-charge. Specification and execution of item at all heights and as per direction of Engineer-in-charge
46Providing and fixing of the cyclorama for the stage by fixing 35x35x5mm MS angle on the wall with MS angle hold fasts secured to the walls & 40mm dia 14G MS pipe welded to it as per the drgs. Further 40mm dia pipe welded to it at 600 centres verticaly at an angle of 45 deg. & finally welding 40 mm dia pipe horzontally to it. The pipe to be supported awayat 200mm centers by MS pipe.(MS framework payable separately) Further welding to it 12mm dia MS hooks weldedboth (top ,bottom & sides). The cycloram frame to be supported by MS angle hold fasts of 35x35x5mm on the wall at 1200mm centers. Finally fixing PVC MAT White screen, cyclorama cloth as per approved sample & fixing by cotton dori 10mm thick complete.The work shall be executed as per drawings ,specifications & instructions of engineer in charge.
47Supply and fixing of2nd Class Teak Wood door frame of section 145mm x 90mm with heat activated intumescent fire seal strip of size 12mm x 4mm(Marshall / Pemko ) with 84mm thick door shutter having 42 dB acoustic , noise reduction properties cum fire door of120 min. fire rating having infill of 42mm thick resin bonded glass wool of 24kg / M3 density with FR Acrylic Sealant ( SDHL / Pemko ) sandwiched between two 12mm thick only Starpan Calcium Silicate boards a 100% without asbestos, Brucite and Meerschaum having a density not more than 1150kg/M3 and thermal conductivity 0.14 W/m* K faced with 6mm thick commercial ply( Century / Green ply )along with 1mm laminate facing / 3mm Decorative Veneer final finish with heat activated intumescent fire seal strip of size 12mm x 4mm( Marshall/ Pemko) mounted in the grooves havingteak wood lipping of size 15x80mm all around the shutter.
48The acoustic wooden door assembly shall have heavy duty 2 nos. automatic concealed spring loaded, self-levellingdoor bottom seals (Marshall / Pemko) and 3 nos. heavy duty full length exposed door jamb seal (Marshall / Pemko). The entire assembly would be prior tested from CBRI Roorkee for double leaf configuration as per IS: 3614 (Part 2, meeting insulation criteria) and BS 476 (Part 20 & 22). The CBRI Roorkee test report should note be older than 5 years and shall clearly reveal the thickness of the calcium silicateboard, laminate , ply and the panic hardwareand the door closer and it was tested with and the same shall be submitted to the Engineer -in-charge for approval of the specialzed fire door vendor prior to manufacturing.
49Providing & fixing acoustic seals on the door assembly shall have heavy duty 2 nos. automatic concealed spring loaded, self-levellingdoor bottom seals (Marshall / Pemko) and 3 nos. heavy duty full length exposed door jamb seal (Marshall / Pemko). as required complete. The work shall be executed as per drawings ,specifications & instructions of engineer in charge.
50Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. For Double door.
51Providing and fixing 25mm dia & 400 mm long brushed steel finishpull handles with with long bolt and cap for fxing from outside only as per design approved by engineer in charge.
52Providing & Fixing Main Curtain made out of fire retardant fabric of Reliance Industries or equivalentwith horizontal sliding arrangement & Motorised operation complete with runners, master runners, pullies, 3 mm steel wire rope, 1 HP motor(Crompton) 2 nos. air breaker contactors (L&T/SIEMENS), 2NOS. micro switches for auto stop, 3 nos. push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900 mm and should be stitched in double gathering with backing fabric.( Overall Size 40" x 20" or as per site condition ). Make : Neo Stage Craft/ Canara Lighting/ Dhjawan Stagecraft.
53Providing and fixing of frills in double gathering box pleats stitched out of fire retardant fabric of Reliance Industries inblack colour . The frill to be fixed from the suspension grid with 25mm dia B class GI pipe suitably hung by means of 35x4mm MS flat. The pipe & flat to be painted with black enamel paint. Make : Neo Stage Craft/ Canara Lighting/ Dhawan Stagecraft
54Providing and fixing Wings made offire retardant fabric of Reliance Industries black fabricas per approved sample & shade over 6mm commercial ply fixed over the metal framework on both sides, metal framework made out of 50x25x16G MS Tube .The Side edges to have suitable Ist class teak wood moulded beading of size 70x18mm as per the design drawing approved / enclosed. The size of beading may vary as per the requirement. The beading to be given two or more coats of clear melamie polish after surface preparation as per manufacture specification complete. Measurement will be made for external dimensions including beading . Make : Neo Stage Craft/ Canara Lighting/ Dhawan Stagecraft
55Supply, Installation,Testing & commissioning of Ellipsodial Lamp -Profile with To be fixed on the FOH lighting bar - 750W HPL with 19/26/36 deg field angle capacity, providing 400-600 lux andbeam diameter of no more than 3.5m at 8m throw distance.Dimmable with rugged die cast aluminium construction High impact, thermally insulated knobs and shutter handles, two accessory slots, and a top mounted, gel frame slot, steel yoke with two mounting positions, positive locking, hand-operated yoke clutch, slot for glass or stainless steel patterns, slot with sliding cover for motorized pattern devices and to be provided with manually operated drop in iris. Make : Neo Stage Craft/ Canara Lighting/ Dhawan Stagecraft
56Supply, Installation,Testing & commissioning of PAR 1000W, 230/240 Volt, PAR Sealed Very narrow spot with color temp of 3200K Socket: Bipin,Focusing: Side sliding knob, Lamp: 1000W halogen bipin T-11 lamp. Finish : Matt black. Make : Neo Stage Craft/ Canara Lighting/ Dhawan Stagecraft
57Supply, Installation,Testing & commissioning of Fresnel flood light- Mounted on stage. Die cast aluminium construction, adjustable knob, zoom adjustable and dimmable with lamp– compact tungsten filament of 1000W and operating voltage- 230/240V at 50Hz. Should provide 400-500lux and beam diameter of not less than 4m at throw distance of 6m. Make : Neo Stage Craft/ Canara Lighting/ Dhawan Stagecraft
58Supply, Installation,Testing & commissioning of 500W Halogen Cyclorama Flood LightsReflector: Aluminium anodized Lens:Planoconvex 150mm dia Socket: 2 nos compressible recessed, Finish : Matt black Lamp: 500W halogen tube ( Halonix). Make : Neo Stage Craft/ Canara Lighting/ Dhawan Stagecraft
59Supply, Installation,Testing & commissioning of 1000 W Halogen light Lamp: 1000W halogen tube ( Make: Halonix) Reflector: Aluminium anodized Socket: 2 nos compressible recessed single contact. Finish : Brochomite Balck . Make : Neo Stage Craft/ Canara Lighting/ Dhawan Stagecraft
60Supply, Installation,Testing & commissioning of 36 LEDs 3W 15° (12 red, 12 green and 12 blue) 4 digital display. There dimmer manual mode, running, strobe, speed adjustable, adjust the data with a power saving,boot automatically recover data. DMX 512 protocol - 8 DMX channels Main dimmer , RGB color changing , Strobe effect, Auto play with internal programs , Master/Slave function, Stand alone mode . Power supply: AC 100V-AC240V 50/60 Hz. Light power connect maximum range 15pcs to 30pcs. Consumption: 115W . Make : Neo Stage Craft/ Canara Lighting/ Dhawan Stagecraft
61Supply, Installation,Testing & commissioning of Lighting Dimmer System,24 circuits or channels, 4 kW per circuit or channel, Digital Stage Dimmer with Dmx interface. With normal linear switcher and square with memory and sequence programming, 200-255 Volts Ac 3 Phase Supply. Control Connection via XLR or DIN with Surge Protection. Complete with wall mounted patch panel. Make : Neo Stage Craft/ Canara Lighting/ Dhawan Stagecraft
62Supply, Installation,Testing & commissioning of DMX Lighting Controller forStage Lighting Control t for all lights with RJ 45 port, RS 232 port, DMX Input, Channel Faders, Supply voltage: 220 - 240 V , USB Port, With programmable memory & InterconectingDMX cable . Make : Neo Stage Craft/ Canara Lighting/ Dhawan Stagecraft
63Providing & Fixing of Wiring for stage luminaries & DMX : Supply and wiring of stage luminaries with 3 core 2.5sq.mm flexible cable or DMX cables run inside the Cable tray/ conduits with Termination at the Dimmer Control Panel. Make : Neo Stage Craft/ Canara Lighting/ Dhawan Stagecraft
64Providing & Fixing Stage side ladders for mounting stage luminaries made of 50x25mm, 16G MS tubes welded in required size with Clamps. Make : Neo Stage Craft/ Canara Lighting/ Dhawan Stagecraft
65Providing & Fixing Suspension Grid made out of 40x40x4 m/s Angel , Made from 40x40x4 m/s Angel , with square of 6’ x 8’, Overall size of 45” (W) & 20 feet ( B ).
66Providing and fixing Light Bar 50mm outer dia B class GI pipe to be hung from suspension grid & root structure for lights & Wings
67Length 40 feets.
68Length 20 feets.
69Supply, installation, testing and commissioning ISI marked (IS:940) portable chemical fire extinguisher,(gas pressure) type capacity 9 litres with gun metal cap and nozzle and complete in allrespectsincluding initial fill and wall suspension brackets. Make : Chubbsafe, Gateway, Steelage, Hamilton safe,Rosengranes,
70Supply,Installation,Testing & Commissioning of Professional Grade 2 way Multipurpose FOHLoudspeaker System, LF - 12”, HF - 1” exit, Max SPL : 129db / 1m, RMS Power : 400W (AES), Nominal Impedence : 8 ohms, Nominal Dispersion : 90 x 60, 7 Integrated flying points. Make : Martin Audio/ Celto Acoustique/ Mayer sound / Renkus Henz.
71Supply,Installation,Testing & Commissioning of High Quality Compact Subwoofer, Single 13", Max SPL: 130 db / 1m, 600W RMS / 1200W ProgramRMS, Nominal Impedence 4 ohms. Make : Martin Audio / Celto Acoustique / Renkus Henz.
72Supply,Installation,Testing & Commissioning ofTwo way Stage Monitor Loudspeaker system, LF - 8", HF - 1" Exit, Max SPL 121db/1m, RMS 150W, Nominal impredence : 8 ohms . Make : Martin Audio / Celto Acoustique / Renkus Henz.
73Supply,Installation,Testing & Commissioning ofWall Mount Speakers for Green Room - LF - 5", , Max SPL 120db/1m, RMS 30W, Nominal impredence : 8 ohms. Make : Martin Audio / Celto Acoustique / Renkus Henz.
74Supply,Installation,Testing & Commissioning ofProfessional Dual channel Power amplifier, 2x 300W @ 8 ohms, 2 x 450W @ 4 ohms, Inbuilt Xover - Bypass / Highpass / low pass operation . Make : Martin Audio / VAL / Renkus Henz.
75Supply,Installation,Testing & Commissioning ofProfessional Dual Channel Power amplifier, 2 x 500W @ 8 ohms, 2 x 750W @ 4 ohms, 2 x 1000W @ 2 ohms, V Guard protection . Make : Martin Audio / VAL / Renkus Henz.
76Supply,Installation,Testing & Commissioning ofProfessional Dual Channel Power amplifier, 100W @ 8 ohms, V Guard protection . Make : Yamaha / Bosch / Pace.
77Supply,Installation,Testing & Commissioning ofSlim Line Gooseneck Microphone with Polar pattern Hypercardioid , Frequency range 50 to 19,000 Hz , Sensitivity12 mV/PA, =-38 dBV re 1 V/Pa, Max. SPL125 dB (for 1% THD) , Equivalent noise level <21 dB-A , Signal/noise ratio (A-weighted) >73 dB ,Impedance<=600 ohms , Recommended load impedance>=2,000 ohms Supply voltage9 to 52 V phantom power to DIN 45596 (DPA adapter integrated) Connector3-pin male XLR complete as per the specifications.Make : AKG/TOA/ Shure.
78Supply,Installation,Testing & Commissioning ofWired microphone -Wired Handheld Microphone, super cardioid polar, 50-16,000Hz, 100-14,000Hz (1m) etc. complete with installation as per the site requirement. Make : AKG/TOA/ Shure.
79Supply,Installation,Testing & Commissioning ofMicrophone stand. Microphone Stand etc. complete with installation as per the site requirement. Make : Bosch/ GS.
80Supply,Installation,Testing & Commissioning ofCordless Handheld Microphone withCarrier frequency range: 660 to 865 MHz, 8 selectable frequencies. Signal/noise ratio: typ. 110 dB(A) Audio outputs: bal. XLR and unbal. 1/4 in. jack, output level adjustable, at rated deviation: 500 mV rms complete as per the specifications. Make : AKG/TOA/ Shure.
81Supply,Installation,Testing & Commissioning ofDigital Signal Processor, 2 balanced line inputs on plug-in barrier strips, 4balanced outputs on plug-in barrier strips, Ethernet port for software configuration / control, serial port for third-party RS-232 remote control etc. complete with installation as per the site requirement. Make :DBX / Ashley / Yamaha / V-Tech.
82Supply,Installation,Testing & Commissioning ofAudio mixing console . 22totalinputs mixing console with Effects, Mid-sweep 3-band mono channel EQ, 4-band stereo channel EQ,buses for flexible signal routing: main stereo bus, four group buses, six auxiliary buses, and send buses for the two internal effect processors etc. complete with installation as per the site requirement. Make : Mackie / Soundcraft/Yamaha.
83Supply, Installation, Testing & commissioning of LED Indoor Video wall (True Colour ) with Pixel Pitch 3.9 mm Configuration SMD 3-in-1 LED Type , Size 16"x 9 " ,Brightness 1500 cd/m2, Dimming Capability 0-255 Levels , Contrast Ratio8000:1 , Refresh Rate 2,400 Hz, Color Processing 16-bit, Colors 281 Trillion, Viewing Angle, Horizontal 160°, Vertical 140° , Lifetime 100,000 hrs, Power Input AC 100V-240V, Maximum Power Consumption , Typical 220 ( W/cabinet ) , Average 73 ( W/cabinet ) , Service Access Front, IP Grade Front IP30 / Rear IP20 , CertificationIndian Certifications(BIS Registration copy to be submitted with the bid) BISInternational Safety Certifications( Copy of Certificate to be submitted with the bid) UL , CE ,CB , FCC Make : Barco / Delta / Daktronics.
84Supply, installation, testing & commissioning of Controller cum processor with Inputs of 1 x HDMI, lx DVl, 2 x VGA , 2 xCVBS, 1 xDPl, SDI & 4 x scaled outputs ,mage processor to display Picture in Picture , or single.Approved Make : Barco / Delta / Mitsubishi / LED OEM Certified.
85Supply, installation, testing & commissioning of Moundting Hardware for the LED Video Wall OEM Certified.
86Supply,Installation,Testing & Commissioning of Switching System , wireless transmission ,Operating systemWindows 7/8/8.1/10 32 & 64 bit macOS 10.14/10.15) Video outputs2x HDMI 1.4b Video inputs2x HDMI 1.2 , Frame rateUsing HDMI inputs: Up to 60fps with one input @ 4K Up to 30fps with two inputs @ 4K Output resolution4K DCI (4096x2160) @ 60Hz , Input resolutions4K DCI (4096x2160) @ 60Hz , AudioVia HDMI, analog via Audio Jack 3.5mm, S/PDIF,AirPlay SupportiOS 11, 12 & 13 / macOS 10.14, 10.15 , Google Cast SupportAndroid 9, 10 , Number of sources simultaneous on screen8 (4 per screen) Number of simultaneous connections64 (Button and/or App. Make : Barco /Vowvision
87Supply, installation, testing & commissioning of Preview Monitor of 18" diagonal, Resolution 1920 x 1080 . Makes : LG / Samsung / Viewsonic .
88Supply Installation Testing & Commissioning of Touch Control System with 7 " Touch panel , Control processor with required IR Probes to control AV equipments. Make : Crestron / AMX / Neets.
89Supply,Installation,Testing & Commissioning ofFloor Junction Box with XLR Connector. Approved Make : Customized.
90Supply,Installation,Testing & Commissioning ofHDMI Twisted pairlong distance transmitter cum receiverfor sending HDMI, audio, and bidirectional RS-232 and IR signals, Rangeup to 100 feets over a shielded CATx cable , Resolution up to 1920 x1200, 1080p/60 Deep Color, and 3D . Approved Make : Extron / Delta / Lightware.
91Supply,Installation,Testing & Commissioning ofVideo Data Switcher Cum scaler with 4 x HDMI Inputs , 2 X VGA Output , 1 x Scaled Output on HDMI. Approved Make : Extron / Delta / Logic.
92Supply,Installation,Testing & Commissioning of HD recording & Streaming processor, supporting H.264, with Internalrecording of minimum 1 Tb, media server , multicasting on H.264+/H.264, Network Interface 1 x RJ-45 port(1000Mbps)complete as per the specifications . Make: Extron /Mediapointe / Panasonic.
93Supply,Installation,Testing & Commissioning of Equipment Rack with front door , Castors . Make : Valrack / President / EL.
94Supply,Installation,Testing & Commissioning ofShielded Twisted PairCable , Conductor Metal: Solid Bare Copper with 23 AWG Color Code: Blue/ Grey ( or any combination) , Jacket Material: PVC UL94V-0 . Make : Krystal / Polycab / Belden / D-Link.
95Supply,Installation,Testing & Commissioning ofSpeaker cable Stranded 2 X 1.5 sq mm,PVC insulated and soft PVC sheathed copper low loss, low conductance. Make : Krystal / Polycab / Belden / D-Link.
96Supply,Installation,Testing & Commissioning ofMicrophone Cable with high-quality shielded pair for routing balanced mono or unbalanced stereo micstranded 20AWG tinned copper. Make : Krystal / Polycab / Belden / D-Link.
97Credit for Audio Visual and Security System
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail