Military Engineer Services-MES has published Repair Maintenance Of Centrifugal And Monoblock Pump Sets Submersible Pump Sets And Electric Control Panels Of Submersible Development Of Borewell Lt Panels And Internal Wiring Including Connected Items Of Water Suply Installations Of Cod Area 505 Ab. Submission Date for this Tender is 14-06-2022. Electrification Work Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 07-Jun-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-06-2022 |
Sl. No. | Item Description |
1 | Disconnectingof electric connections from LT control panel and starter of submersible pump set of size 2 to 15 HP ,removing the pipe line connections from discharge side and taking down/out submersible pump set along with column pipe from bore well with the help of chain pully block including transportation to workshop for repairs and back , lowering the pump in bore well after repairs after replacement of rusted nuts, bolts, washers, rubber gasket etc including testing complete all as specified and as directed . |
2 | Labour for Opening the submersible pump set for repairing, rewinding and assembling the pump set including insulating material of any size ofcapacity 2 to 15 HP complete all as specified and as directed by Engg-in-charge.(different make and size of copper winding and other spare parts will be measured under relevant items of this shedule as supply only.) Note :- Copper winding wire of appropriate gauge shall be measured and paid separetely |
3 | Supplying and assembling super enamelled copper winding wire of appropriate gauge suitable upto 2 to 15 HP capacity submersible pump set complete all as specified and as directed. |
4 | Supply Only following spare parts for submersible pump set of capacity 2 HP to 15 HP. |
5 | GM Bush. |
6 | Rotor Sleeve. |
7 | Water seal and cable seal |
8 | Thrust bearing |
9 | Revolving Disc |
10 | CI Connection piece |
11 | GM Sand Guard |
12 | Sealing Ring |
13 | CI upper Housing |
14 | CI lower Housing |
15 | Flange upper with stud and nut |
16 | Flange lower with stud and nut |
17 | Seal bush |
18 | CI Motor Base |
19 | Thrust plate |
20 | Stainless steel coupling |
21 | Coupling key |
22 | Stud and nuts for connection piece |
23 | T Bolt with Nut |
24 | LNK Bolt SS |
25 | Submersible cable joint |
26 | CI Suction Chamber |
27 | CI Stage bowl |
28 | GM Impeller |
29 | EPV Impeller |
30 | EPV Stage Bowl |
31 | GuideBush |
32 | GM DOWL Bush |
33 | SS DOWL Sleeve |
34 | Inter ring |
35 | CI DOWL Piece |
36 | CI NRV body |
37 | Impeller key |
38 | SS pump shaft per stage |
39 | pump sand guard |
40 | SS Distance Sleeve |
41 | EPV Defuser |
42 | Hook bolt with nut |
43 | GM NeckRing |
44 | Mild steel stud with nut |
45 | Wire mesh |
46 | Drain plug |
47 | Labour only for Rotor Sleeve turning and grinding |
48 | Labour only for Remetling of Rotor, turning and balancing |
49 | Labour only for Repairing of stator stamping |
50 | Labour only for balancing of rotor |
51 | Labour only for Remetling of GM impeller & turning |
52 | M & L for Preperation to existing submersible pump set of capacity 2 to 15 HP and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed . |
53 | Supply and fixing in replacement GI Nipple with flange welded, heavy duty 50 x 300 mm size complete all as specified and as directed. |
54 | All as per serial item No 6.00 here-in-before but of size80 x 300 mm |
55 | Supply Only GI column pipe, heavy grade, class "C", 50 mm bore of 3 metre length, heavy duty, flange welded on both ends complete all as specified and as directed . |
56 | All as per serial item No 8.00 here-in-before but80 mm bore Note for 8.00 to 9 :- rate quoted for labour required is deemed to be included in item no. 1. |
57 | Disconnectingof electric connections from LT control panel and starter of monoblock submersible pump set of size 2 to 10 HPvertical/ Horizontal ,removing the connections from discharge side and taking down/out mono block submersible pump setfrom well/sump/sewage well/Sewage treated tank with the help of chain pully block including transportation to workshop for repairs and back , lowering the pump in same placeafter repairs after replacement of rusted nuts, bolts, washers, rubber gasket etc including testing complete all as specified and as directed . |
58 | Labour for Opening the mono block submersible pump set for repairing, rewinding and assembling the pump set including insulating material of any size ofcapacity 2 to 15 HP vertical/ Horizontalcomplete all as specified and as directed by Engg-in-charge.(different make and size of copper winding and other spare parts will be measured under relevant items of this shedule as supply only.) Note :- Copper winding wire of appropriate gauge shall be measured and paid separetely |
59 | Supplying and assembling super enamelled copper winding wire of appropriate gauge suitable for mono block submersible upto 2 to 10 HP complete all as specified and as directed. |
60 | Supply Only following spare parts for mono block submersible pump set of capacity 2 HP to 10 HP. |
61 | Bearing Bush |
62 | Thrust Plate |
63 | CI Impeller |
64 | Thrust bearing |
65 | Impeller key |
66 | Impeller Nut |
67 | Rubber Gasket |
68 | O ring |
69 | M Seal |
70 | Oil Seal |
71 | Oil |
72 | Cable Kit Jointing |
73 | Float Switch |
74 | Labour only for Rotor Sleeve turning and grinding |
75 | Labour only for balancing of rotor |
76 | Supply and fixing in replacement submersible copper cable of size 2.5 Sq mm 3 core, 1100 Volts complete all as specified and as directed . |
77 | All as per serial item No 14.00 here-in-before but cable of size 4 Sq mm 3 core , 1100 Volts . |
78 | Supply and fixing in replacement Mild steel clamps in Mild steel flat of size 50mm x 6 mm with including two Nos Mild steel nut and bolts suitable for 50mm bore column pipe complete all as specified and as directed. |
79 | Supply and fixing in replacement Mild steel clamps in Mild steel flat of size 80 mm x 6 mm with including two Nos Mild steel nut and bolts suitable for 80mm bore column pipe complete all as specified and as directed. |
80 | Supply and fixing in replacement M.S. Casing Cover, heavy duty, made out of Mild steel sheet not less than 6mm thick suitable for 200-300 mm bore pipe complete all as specified and as directed . |
81 | Supply and fixing in replacement single phase preventor, type VSP-IIcomplete all as specified and as directed. |
82 | Supply and fixing in replacement Amp Meter 0 to 100 Amp of size 96 mm x 96 mm, digital type complete all as specified and as directed. |
83 | Supply and fixing in replacement Volt meter 0 to 500 Volts of size 96 x 96 mm digital type |
84 | Supply and fixing in replacement analog type time switch FM 1/Quartz daily 240 volts, AC, 50 Hz code AUTS01ANA00complete all as specified and as directed |
85 | S&F Star Delta electronic ST 100 Timer 3-30 Second duration, 160 V to 500 V |
86 | Supply and fixing in replacement Indicating light RYG LED type(03 Nos each Set)complete all as specified and as directed . |
87 | Supply & fixing , install testing and commissioning of feeder pillar box ,outdoor type cubical shape,three phase, 4 wire, Al bus bar for phases and neutral made out of CRCA sheet 3.15 mm thick ,factory fabricated , CPRI approved , powder coated ,dust and vermin proof , provn for ventilation , angle iron frameand four legs of 50x50x6mm thick angle iron ,2 ft long grouted on PCC foundation of height not less than 30 cm from the ground level , grouting properly ,and of suitable size to accomodate the items mentioned belowand having seperate compartment /chambers for cable gallery busbar ,switch gear etc all as specified and comprising of following including necessary cable connections to the MCCBs ,voltmeter,Ammeter and cable lugs etc . |
88 | Al bus bar with PVC sleeve suitable for 200 amps for phase & 200 Amp for neutral- 01Set. |
89 | Voltmeter,digital type 0- 500 volt,with selector switch - 01 set |
90 | Ammeter Digital type 0-100Amps, with selector switch and CT"-1set |
91 | Phase indicating lamps LED type ( red , yellow, blue) 01 set |
92 | Incoming MCCB125 Amp 3 pole 18 KA with adjustable thermal and fixed magnetic release -01 No |
93 | outgoing MCCB63 Amp 3 pole 18 KA with adjustable thermal and fixed magnetic release -01 No |
94 | FASD Stater with ms sheet encloser ML 1.5 FASD-01 Nos |
95 | Analog time switch -01 No |
96 | Single phase preventer-01 No |
97 | Extension/ development of borewell for drilling not less than 250 mm bore hole by DTHmethod to any depth below the ground level in any kind of rock/soil upto 100 mtr deep including disposal of surplus soil to a distance not exc 50 mtr away complete all as specified and as directed. Note : 1) In case of incountering rock prior to 30 mtr depth from ground level the decission of the Garrison Engineer for reboring shall be final and binding.Specific order in writing shall be issued by Garrison Engineer for reboring and the quantities shal vary accordingly.2) cost of transportation of DTH plant is included in the unit rate. |
98 | Supplying, lowering & fixing into bore 200 mm dia MS casing pipe, heavy duty as per IS-4270, minimum 5.4 mm thick ERW having Duly welded both sides socketed ends ciomplete all as specified and as directed. |
99 | Supplying, lowering & fixing into bore hole 200 mm dia MS casing pipe, heavy duty as per IS -4270 minimum 5.40 mm thick ERW slottedtube having 1.5 mm to 3mm slot having socketed ends at complete all as specified and as directed |
100 | M&L for development of bore well of any capacity and size at the pressure 10 kg/sqcm to 15 kg/sqcm by diesel engine driven air compressor of capacity 620 cfm includiing air pipe and connected items to improve the yield of tube well complete all as specified and as directed. |
101 | Supplying and packing pea gravel of size 3.00 mm to 6.00 mm around casing pipe complete all as specified and as directed. |
102 | Disconnecting of electrical connections from panel board including disconnecting the cable leads from the motor terminal box and Opening the electric induction motor of following capacity including taking down/out the burnt winding wire , cleaning the slots, rewinding the motor with super enamalled copper winding wire of existing gauge ,weight etc taking down/out from base plate of pump set after opening the nuts, bolts etc and transporting the motor to workshop for repair and back, re-installed after repair including testing complete all as specified and as directed .Note:- Copper winding wire of approprioate guage will be measured in supply only |
103 | 5-15 HP |
104 | 20-30 HP |
105 | 40-50 HP |
106 | 60-75 HP |
107 | 90-105 HP |
108 | Disconnecting and De-coupling the Centrifugal pump of following capacity from foundation after opening /cutting the rustednuts, bolts & Opening the centrifugal pump of following capacity, repairing the same by replacing the unserviceable spare parts including machining work and re-assembling the same in original position complete etc including transporting the pump to workshop for repairand back, re-installed at existing position after repair and providing new MS nuts, bolts,packing flange etcincluding testing complete all as specified and as directed. Note:- Spare Parts required shall be measured & paid spaerately. |
109 | 5-15 HP |
110 | 20-30 HP |
111 | 40-50 HP |
112 | 60-75 HP |
113 | 90-105 HP |
114 | Supply and fixingin replacement of spare parts for Centrifugal pump of 5-15 HP Capacity. |
115 | CI Impeller |
116 | pump shaft |
117 | CI Casing wear ring |
118 | CI interstage ring |
119 | CI stuffing box bush |
120 | CI Gland Plate |
121 | lentern ring |
122 | eye bolt with nut |
123 | CI Shaft sleeve |
124 | Gasket Packing Sheet |
125 | Gland packing champion (Both side) |
126 | impeller key |
127 | coupling key |
128 | water liquid deflector |
129 | CI bearing cartridge |
130 | CI bearing plate |
131 | MS Stud with nut |
132 | Supply and fixingin replacement of spare parts for Centrifugal pump of 20-30 HP Capacity. |
133 | CI Impeller |
134 | pump shaft SS (AISI-410) |
135 | Remetling of pump shaft,turning and balancing |
136 | CI Shaft sleeve |
137 | CI Casing wear ring |
138 | CI interstage ring |
139 | CI stuffing box bush |
140 | CI Gland Plate |
141 | lentern ring |
142 | eye bolt with nut |
143 | Gasket Packing Sheet |
144 | Gland packing champion (Both side) |
145 | impeller key |
146 | coupling key |
147 | water liquid deflector |
148 | CI bearing cartridge |
149 | CI bearing plate |
150 | MS Stud with nut |
151 | Supply and fixingin replacement of spare parts for Centrifugal pump of 40-50 HP Capacity. |
152 | CI Impeller |
153 | pump shaft SS (AISI-410) |
154 | Remetling of pump shaft,turning and balancing |
155 | CI Shaft sleeve |
156 | CI Casing wear ring |
157 | CI interstage ring |
158 | CI stuffing box bush |
159 | CI Gland Plate |
160 | lentern ring |
161 | eye bolt with nut |
162 | Gasket Packing Sheet |
163 | Gland packing champion (Both side) |
164 | impeller key |
165 | coupling key |
166 | water liquid deflector |
167 | CI bearing cartridge |
168 | CI bearing plate |
169 | MS Stud with nut |
170 | Supply and fixingin replacement of spare parts for Centrifugal pump of 60-75 HP Capacity. |
171 | CI Impeller |
172 | pump shaft SS (AISI-410) |
173 | Remetling of pump shaft,turning and balancing |
174 | CI Shaft sleeve |
175 | CI Casing wear ring |
176 | CI interstage ring |
177 | CI stuffing box bush |
178 | CI Gland Plate |
179 | lentern ring |
180 | eye bolt with nut |
181 | Gasket Packing Sheet |
182 | Gland packing champion (Both side) |
183 | impeller key |
184 | coupling key |
185 | water liquid deflector |
186 | CI bearing cartridge |
187 | CI bearing plate |
188 | MS Stud with nut |
189 | Supply and fixingin replacement of spare parts for Centrifugal pump of 90-105 HP Capacity. |
190 | CI Impeller |
191 | pump shaft SS (AISI-410) |
192 | CI Shaft sleeve |
193 | CI Casing wear ring |
194 | CI interstage ring |
195 | CI stuffing box bush |
196 | CI Gland Plate |
197 | lentern ring |
198 | eye bolt with nut |
199 | Gasket Packing Sheet |
200 | Gland packing champion(Both side) |
201 | impeller key |
202 | coupling key |
203 | water liquid deflector |
204 | CI bearing cartridge |
205 | CI bearing plate |
206 | MS Stud with nut |
207 | Supplying and assembling super enamelled copper winding wire of appropriate gauge suitable upto 105 HP. |
208 | Supplying and Fixing in replacement of Terminal Connection Plate of following capacity |
209 | 10-40 HP |
210 | 50-105 HP |
211 | Supply and fixingspare tyre for couplingtype TC/P/011 after taking down/outas existing at site complete all as specified and as directed. |
212 | Supply and fixingspare tyre for couplingtype TC/P/013 after taking down/outas existing at site complete all as specified and as directed. |
213 | Supply and fixingspare tyre for couplingtype TC/P/014 after taking down/outas existing at site complete all as specified and as directed |
214 | Supply and fixingspare tyre for couplingtype TC/P/015 after taking down/outas existing at site complete all as specified and as directed |
215 | Supply and fixingspare tyre for couplingtype TC/P/019 after taking down/outas existing at site complete all as specified and as directed. |
216 | Supply and Fixing in replacement of Ball Bearing 6305 |
217 | Supply and Fixing in replacement of Ball Bearing 6306 |
218 | Supply and Fixing in replacement of Ball Bearing 6307 |
219 | Supply and Fixing in replacement of Ball Bearing 6308 |
220 | Supply and Fixing in replacement of Ball Bearing 6309 |
221 | Supply and Fixing in replacement of Ball Bearing 6310 |
222 | Supply and Fixing in replacement of Ball Bearing 6312 |
223 | Supply and Fixing in replacement of Ball Bearing 6314 |
224 | Supply and fixingin replacement 3 pole power contactor type ML-1.5, 415 Volts, 50 HZ range 25 Amps complete all as specified and as directed |
225 | Supply and fixingin replacement 3 pole power contactor type ML-2, 32 Amps, 415 Volts, 50 HZ complete all as specified and as directed. |
226 | Supply and fixingin replacement 3 pole power contactor type ML-3, 40 Amps, 415 Volts, 50 HZ complete all as specified and as directed |
227 | Supply and fixingin replacement 3 pole power contactor type ML-4, 70 Amps, 415 Volts, 50 HZ complete all as specified and as directed |
228 | Supply and fixingin replacement 3 pole power contactor type ML-6,110 Amps,415 Volts, 50 HZ complete all as specified and as directed |
229 | Supply and fixingin replacement 3 pole power contactor type ML-12, 200 Amps 415 Volts, 50 HZ complete all as specified and as directed. |
230 | S & F in replacement of over load replay type ML 1.5, starter , relay range 10-16 Amp complete all as specified and as directed. |
231 | S & F in replacement of over load relay typeML 2, starter , relay range 20-32 Amps complete all as specified and as directed. |
232 | S & F in replacement of over load relay typeML 3, starter , relay range 28-42 Amps complete all as specified and as directed. |
233 | S & F in replacement of over load relay typeMN 5 ,MNX relay range 45-75 Amps complete all as specified and as directed. |
234 | S & F in replacement of over load relay typeMN 5 ,MNX relay range 66-110 Amps |
235 | Material and labour for paintingTwo coat of synthetic enamelpaint as per existing pattern or scheme, on centrifugal pump & motor of any capacity rating 10-105 HP upto NRV or sluice valve,andMS Base channel including preparation of surfaces by scratching and removing the rust complete all as specified and as directed. |
236 | Supply and Fixing in replacement MS base channel& angle of size as exists including cutting, welding andmaking hole including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
237 | Supplying , laying , jointing, welding and testing MS Pipe (Heavy class"C") IS : 1239/3589, of followiing sizes laid in trenches or in Horizontal/Vertical/inclined position orlaying on floors for connectionsfor suction, to header andconnected to out going water main CI/DI/GI pipe line, forfollowing size including taking out the old unserviceable pipes :- Note:- MS Flangesincl fabrication work will be measured and paid separately. |
238 | 80mm dia |
239 | 100 mm dia |
240 | 150 mm dia |
241 | supply and fixing in replacement of MS flange 80 mm bore ,16mm thick duly welded with flange joint including nuts bolts ,washer ,Rubber or fiber board gasketjoint of size80mm size |
242 | supply and fixing in replacement of MS flange 100 mm bore ,16mm thick duly welded with flange joint including nuts bolts ,washer ,Rubber or fiber board gasketjoint of size100mm size |
243 | Supply and fixing in replacement of MS flange 150 mm bore ,16mm thick duly welded with flange joint including nuts bolts ,washer ,Rubber or fiber board gasketjoint of size150mm size |
244 | Supply and fixing jointing and testing of cast iron Non return valve without by pass arrangment swing type confirming to IS 5312 flanged ends pressure rating PN 1.0 complete including taking out unserviceable NRVall as specified and as directed by Engineer-in-Charge.Note - Flanged joints complete withrubber jointing materail shall deemed to be included in the unit rate of this item |
245 | 80mm bore |
246 | 100mm bore |
247 | 150mmbore |
248 | Supply and Fixing in replacement of CI Foot valve offollowing size , Flanged ends, Swing type opration with rubber sheet as per IS-4038 including taking out unserviceable of following sizes complete all as specified and as directed Note:- Flanged joints comlete with jointing material shall deemed to be included in the unit rate of this items. |
249 | 80mm bore |
250 | 100mm bore |
251 | 150mmbore |
252 | Material and labour for PCC (1:2:4) type B-I(with 20 mm graded aggregate) as in coping, grouting, MS nut for motor base , finished even and smooth without using extra cement as on brick work/flooring complete including demilition of PCC complete all as specified and as directed |
253 | Supply and Fixing in replacement of MS foundation bolts with nuts and washers, size 20mm dia , 450 mm long complete all as specified and as directed.(including breaking of hard standing foundation) |
254 | Supply and Fixing in replacement of Vibration Pad with nuts, bolts and washers, for existing capacity of 7.5-30 HP complete all as specified and as directed |
255 | Supply and Fixing in replacement of Vibration Pad with nuts, bolts and washers, for existing capacity of 40-75 HP complete all as specified and as directed. |
256 | Supply and fixing in replacement PVC insulated multistranded copper conductor wire of 10 Sqmm size, single core, 1100 volts complete all as specified and as directed. |
257 | All as per item no 76 here in before but of size 16 Sqmm |
258 | All as per item no 76 here in before but of size 25 Sqmm |
259 | All as per item no 76 here in before but of size 35 Sqmm |
260 | Excavation in trenches not exc 1.5 metres wide and not exc 1.5 metres deep for pipe lines in soft/loose soil, getting out and levellling of bottom surface to required level complete all as specified and as directed |
261 | Returning fillling in including spreding, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed |
262 | Removing execavated material from site to a distance not exc 50 metres away and depositing where directed not exc 1.5 metres from the starting point complete all as specified and as directed |
263 | Supplying and laying well burnt bricks sub class B for protection of cable complete all as specified and as directed |
264 | M&L Jamuna Sand filling under and above the electrical cable for cable cushioning complete all as specified and as directed. |
265 | S & F in replacement of LT XLPE cable from trenches/wall/ceilings and Supply ,laying jointing and testing LT XLPE under ground cable PVC insulated armoured heavy duty 1100 volts grade sheated25 sq mm 3.5 core, aluminium conductor including connection to panel at incoming and out going using aluminium lugs complete all as specified and as directed |
266 | All as per item No 85 Here in before but 35 Sqmm |
267 | M&L Galavanised iron strip 25x4 mm as earthing lead including connecting to earthing test point to the equipment to be earthed by means of nuts ,bult and washers complete all as specified and as directed |
268 | M & L for heat shrinkable LT 1100V straight through joint suitabel for aluminium conductor cable of size 25 to 50 sqmm complete all as specified and as directed |
269 | S & F Fully automatic stat delta motor starter of maximum motor output17.5 Hp of motor rating AC 3 duty 415V 50 Hz 3 phase, MN-16, relay range 9-15 Ampsincluding taking down old starter complte complete all as specified and as directed |
270 | All as per item no 89 Here in before but 30 HP MN-25, relay range 14-23 Amps |
271 | All as per item no 89 Here in before but 50 HP ML-3, relay range 28-42 Amps |
272 | All as per item no 89 Here in before but 75 HP ML-4, relay range 45-75 Amps. |
273 | S & F in replacement MCCB 600 to 630 Amps, 4 pole 415V,Adjustable type of breaking capacity 50 KA inlcuding linkand connecting to bus bars and cable endtermination with suitable lugs complete all as specified and as directed. |
274 | All as per item No 93 here in before but MCCB 400Amps, 4 pole, 415 V, breaking capacity 36 KA |
275 | All as per item No 93 here in before but MCCB 250Amps, 4 pole, 415 V, breaking capacity 36 KA |
276 | All as per item No 93 here in before but MCCB 200Amps, 4 pole, 415 V, breaking capacity 36 KA |
277 | All as per item No 93 here in before but MCCB 160, 4 pole, 415 V, breaking capacity 36 KA |
278 | All as per item No 93 here in before but 3 pole MCCB125Amps,415V, breaking capacity 16 KA |
279 | All as per item No 93 here in before but 3 pole MCCB 63Amps,415 V, breaking capacity 16 KA |
280 | Taking down old unserviceable point wiring from existing conduit ( light fan , socket or powder) complete such as switches, ceiling rose, pendent holder and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc complete all as specified and as directed. |
281 | Material and labour for point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated un-sheathed and stranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers except conduit junction box (junction box will be of MS) including FRLS PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing modular switches/sockets/fan regulator etc complete all as specified and as directed for the following :- (Note : The cost of modular type Metal boxes and modular accessories like cover plates will be included in quoted rate.) |
282 | one light point / fan point/ exhaust fan point / circulator fan point / bell/ buzzer controlled by one 1-way switch/ bell push. |
283 | one socket outet point 5 amps on the same board. |
284 | one socket outet point 5 amps on the independent board. |
285 | All as per item no. 101 here in before but with 2.5 sqmm copper FRLS wire with 1.5 Sqmm FRLS copper earth wire |
286 | Supply & fixing in replacement of switch piano, flush type single pole 1 way, 5 Amps complete all as specified and as directed. |
287 | Supply & fixing in replacement of switch piano, flush type single pole 1 way, 15 Amps complete all as specified and as directed. |
288 | Supply & fixing in replacement of socket outlet 6 Amp, 2 in 1,3 pin 5 Amps |
289 | Supply & fixing in replacement of socket outlet 15 Amp, 2 in 1,3 pin 5 and 15 Amps |
290 | Supply & fixing in replacement ofFan regulator step type, 120 watts, |
291 | Supply and fixing in replacement of Ceiling rose, surfacebakelite 3 terminal, 240 volts, 5 Amps with back plate of 3 mm thickbakelite, laminated hylem sheet of appropriate size& MS box of suitable size complete all as specified and as directed. |
292 | Supply and Fixing lamp holder,PVC/ Polycarbonate type with back plate suitable for batten fitting (angle /plain) complete all as specified and as directed |
293 | Supply and fixing in replacement ofDistribution Boarddouble Doormade out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 08 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified and as directed. |
294 | Supply and fixing in replacement ofDistribution Boarddouble Doormade out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified and as directed. |
295 | Supply and fixing in replacement of MCB SP 16 to 32 Amps " C "Curve , 240 volts AC supply, capacity not less than 10 KA connection complete all as specified and as directed. |
296 | Supply and fixing in replacement of MCBSPN 32 Amps " C "Curve , 240 volts AC supply, capacity not less than 10 KA connection complete all as specified and as directed. |
297 | Supply and fixing ofLED tube fittings 20 Watt LUMILINE Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver connection completeall as specified and as directed |
298 | Supply and fixing in replacement of Recessed Mountedwith PLUTO Neo PANEL 2X2 LED 42 Watt Environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling complete all as specified and as directed |
299 | Supply and fixingceilling fan 1200 mm sweep Single pole230V , 50Hz complete with fan regulator and down rodconnection completeall as specified and as directed |
300 | S & F in replacement of 25 Watt LED post top New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source connection complete all as specified and as directed |
301 | Material and labour including jointing and testing of cast iron sluice valves class PN-1.0, conforming to IS14846 flanged ends drilled having stainless steelspindle with cast iron wheel at top complete with nuts, bolts, washers and rubber gaskets including taking out unserviceable sluicevalve and removal from siteforthe follwing sizes complete all as specifiedand as directed |
302 | 80mm bore |
303 | 100mm bore |
304 | 150mmbore |
305 | Supply and fixing in replacement 60 watt LED street light New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07including making connections with GI pipe 0.6mtrangle braket fixing on wall and connectng to ceiling rose with apropriate wirecomplete all as specified and as directed . |
306 | Supply and fixing in replacement 35 watt LED street light New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07including making connections with GI pipe 0.6mtrangle braket fixing on wall and connectng to ceiling rose with apropriate wirecomplete all as specifiedand as directed . |
307 | Supply & Fixing in replacement of PVC insulated multistranded copper conductor wire of size 2.5 Sqmm, 1100 volts grade connection complete all as specified and as directed |
308 | Supply only LED bulb of 9 watt |
309 | S&F in replacement rotational moulded polythylene water storage tanks of capacity 500 ltr triple layercylindrical vertical with closed top hoisted and fixed in positionfor primingof centrifugalpump set complete all as specified and as directed in SSR part I |
310 | M&L for fabrication(welding work ) of MS Header/ any size upto 300mmMS pipeat various pump house site for connection of pipe , arresting leakges on header complete all as specified and as directed |
311 | Material and labourfor painting two coat of synthetic enamel paint as per existing pattern on pipe surface/header connectionincluding preparation of surfaces by scratching and removing the rust, red primer coat complete all as specified and as directed |
312 | Supply & fixing in install testing and commissioning of feeder pillar box ,indoor type cubical shape,three phase, 4 wire, Al bus bar for phases and neutral made out of CRCA sheet 2.0 mm thick ,factory fabricated , CPRI approved , powder coated ,dust and vermin proof , provn for ventilation , angle iron frameand four legs of 50x50x6mm thick angle iron ,2 ft long grouted on PCC foundation of height not less than 30 cm from the ground level , grouting properly ,and of suitable size to accomodate the items mentioned belowand having seperate compartment /chambers for cable gallery busbar ,switch gear etc all as specified and comprising of following including necessary cable connections to the MCCBs ,voltmeter,Ammeter and cable lugs etc . |
313 | Albus bar with PVC sleev suitable for 600 amps for phase & 400 Amp for neutral- 01Set. |
314 | Voltmeter,digital type 0- 500 volt,with selector switch - 01 set |
315 | (c) Ammeter Digital type 0-600Amps, with selector switch and CT"-1set (set of three) |
316 | Phase indicating lamps LED type ( red , yellow, blue) 01 set |
317 | Incoming MCCB400 Amp 4 pole 36 KA with adjustable thermal and fixed magnetic release -01 No |
318 | outgoing MCCB250 Amp 4 pole 36 KA with adjustable thermal and fixed magnetic release -02 No |
319 | outgoing MCCB100 Amp 3 pole 16 KA with adjustable thermal and fixed magnetic release -04 No |
320 | ML-1.5 Star Delta starter fully automatic suitable for 415V AC upto motor 10 HP with ON/OFF & Trip indication including sheet enclosure-01 No. |
321 | Analog time switch 1 module-01 No |
322 | Single phase preventer-01 No |
323 | Supply & fixing in install testing and commissioning of feeder pillar box ,indoor type cubical shape,three phase, 4 wire, Al bus bar for phases and neutral made out of CRCA sheet 2.0 mm thick ,factory fabricated , CPRI approved , powder coated ,dust and vermin proof , provn for ventilation , angle iron frameand four legs of 50x50x6mm thick angle iron ,2 ft long grouted on PCC foundation of height not less than 30 cm from the ground level , grouting properly ,and of suitable size to accomodate the items mentioned belowand having seperate compartment /chambers for cable gallery busbar ,switch gear etc all as specified and comprising of following including necessary cable connections to the MCCBs ,voltmeter,Ammeter and cable lugs etc . |
324 | Albus bar with PVC sleeve suitable for 400 amps for phase & 300 Amp for neutral- 01Set. |
325 | Voltmeter,digital type 0- 500 volt,with selector switch - 01 set |
326 | Ammeter Digital type 0-400Amps, with selector switch and CT"-1set ( set of three) |
327 | Phase indicating lamps LED type ( red , yellow, blue) 01 set |
328 | Incoming MCCB250 Amp 4 pole 36 KA with adjustable thermal and fixed magnetic release -01 No |
329 | outgoing MCCB160 Amp 4 pole 36 KA with adjustable thermal and fixed magnetic release -02 No |
330 | outgoing MCCB63 Amp 3 pole 16 KA with adjustable thermal and fixed magnetic release -02 No |
331 | ML-3 Star Delta starter fully automatic suitable for 415V AC upto motor 50 HP with ON/OFF & Trip indicationincluding sheet enclosure.-02 Nos |
332 | ML-1.5 Star Delta starter fully automatic suitable for 415V AC upto motor 10 HP with ON/OFF & Trip indication including sheet enclosure. -01 Nos |
333 | Single phase preventer-01 Nos |
334 | Analog time switch 1 module-01 No |
335 | Supply & fixing in install testing and commissioning of feeder pillar box ,indoor type cubical shape,three phase, 4 wire, Al bus bar for phases and neutral made out of CRCA sheet 2.0 mm thick ,factory fabricated , CPRI approved , powder coated ,dust and vermin proof , provn for ventilation , angle iron frameand four legs of 50x50x6mm thick angle iron ,2 ft long grouted on PCC foundation of height not less than 30 cm from the ground level , grouting properly ,and of suitable size to accomodate the items mentioned belowand having seperate compartment /chambers for cable gallery busbar ,switch gear etc all as specified and comprising of following including necessary cable connections to the MCCBs ,voltmeter,Ammeter and cable lugs etc . |
336 | Albus bar with PVC sleeve suitable for 400 amps for phase & 300 Amp for neutral- 01Set. |
337 | Voltmeter,digital type 0- 500 volt,with selector switch - 01 set |
338 | Ammeter Digital type 0-400Amps, with selector switch and CT"-1set ( set of three) |
339 | Phase indicating lamps LED type ( red , yellow, blue) 01 set |
340 | Incoming MCCB160 Amp 4 pole 36 KA with adjustable thermal and fixed magnetic release -01 No |
341 | outgoing MCCB63 Amp 4 pole 16 KA with adjustable thermal and fixed magnetic release -03 No |
342 | ML-1.5 Star Delta starter fully automatic suitable for 415V AC upto motor 10 HP with ON/OFF & Trip indication including sheet enclosure.-03 Nos |
343 | Analog time switch 1 module-03 Nos |
344 | Single phase preventer-03 Nos |
345 | Supply & fixing in install testing and commissioning of feeder pillar box ,indoor type cubical shape,three phase, 4 wire, Al bus bar for phases and neutral made out of CRCA sheet 2.0 mm thick ,factory fabricated , CPRI approved , powder coated ,dust and vermin proof , provn for ventilation , angle iron frameand four legs of 50x50x6mm thick angle iron ,2 ft long grouted on PCC foundation of height not less than 30 cm from the ground level , grouting properly ,and of suitable size to accomodate the items mentioned belowand having seperate compartment /chambers for cable gallery busbar ,switch gear etc all as specified and comprising of following including necessary cable connections to the MCCBs ,voltmeter,Ammeter and cable lugs etc . |
346 | Albus bar with PVC sleeve suitable for 400 amps for phase & 300 Amp for neutral- 01Set. |
347 | Voltmeter,digital type 0- 500 volt,with selector switch - 01 set |
348 | Ammeter Digital type 0-400Amps, with selector switch and CT"-1set ( set of three) |
349 | Phase indicating lamps LED type ( red , yellow, blue) 01 set |
350 | Incoming MCCB250 Amp 4 pole 36 KA with adjustable thermal and fixed magnetic release -01 No |
351 | outgoing MCCB160 Amp 4 pole 36 KA with adjustable thermal and fixed magnetic release -02 No |
352 | outgoing MCCB100 Amp 3 pole 16 KA with adjustable thermal and fixed magnetic release -02 No |
353 | ML-3 Star Delta starter fully automatic suitable for 415V AC upto motor 50 HP with ON/OFF & Trip indicationincluding sheet enclosure.-02 Nos |
354 | Single phase preventer-02 Nos |
355 | Supply and fixing &installation in replacement ofperforated MS cable tray of size 350x50x2mm including horizontal and vertical bends, prepared hanging systemand other accessories including painting of cable tray ofcomplete all as specified and as directed. |
356 | M&L for DI flange fittingsof A/F Tee, D/FBendand DI flange SocketPiece of size 80 to 100mmdia bore Equal incluidng required cutting existing pipeconnection complete all as specified and as directed. |
357 | Material and labour for Brick workwith sub class "B" bricks straight or curved on plan exc. 6M mean radius built in CM (1:4) for pillar in Borewell complete all as specified and as directed |
358 | An amount of Rs 133022.00 shall be deducted from BOQ on account of schedule of credit |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail