Ayodhya Municipal Corporation has published Construction And Installation Of 2 Seated Fabricated Pink Toilet.. Submission Date for this Tender is 13-05-2022. Toilet Bathroom Tenders in ayodhya Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Supply & Installation FabricatedToilet under spacification as below unit Steel Super structure with all accessories |
2 | Fabrication of Tank Coverings on all sides by MS/PPGI Corrugated Sheet |
3 | Specification |
4 | Unit Size-1220 mm x 915 mm x 2055 mm |
5 | Wall-Zero Spangled Cold rolled 120GSM Galvanised(Galvano) powder coated 40mm thick EPS panels(EPS Density – 16 kg/m3, EPS thickness 38mm,Steel sheet thickness- 0.6mm, 275 MPA) |
6 | SS Panel Skirting-250 mm SS 304 skirting at the bottom of the structrure . Batter maintenace and increased longevity |
7 | Ceilling-Zero Spangled Cold rolled 120GSM Galvanised(Galvano) powder coated 40 -70 mm thick EPS panels(EPS Density – 16 kg/m3, EPS thickness 38mm,Steel sheet thickness- 0.6mm, 275 MPA |
8 | Roof Projection-50 mm projection on all the 4 sides |
9 | Door-Zero Spangled Cold rolled 120GSM Galvanised(Galvano) powder coated with necessary stiffeners and Aluminium accessories (2 Al handles , 1 Al tower bolt , 1 Al L – drop ) . Door Size – 1790 mm* 655 mm ( Steel Sheet thickness – 0.6 mm, 275 MPA ) |
10 | Tank Frame-Overhead Tank Frame with capacity 200 litres . Mechanism to lock the tank for enhanced safety. |
11 | SS 304 pan with Flooring / SS Wash Basin-Provision for high quality Stainless Steel accessories |
12 | Fastners-Galvanised fastners |
13 | Door Accessories per seat-2 Al handles , 1 Al tower bolt , 1 Al L – drop |
14 | Ventitation-3 side Spangled Cold rolled 120GSM Galvanised(Galvano) powder coated louvre panel for cross ventilation with EPS insulated panels Provision for natural light above door . |
15 | IWC-1 Nos of ceramic IWC pan per Toilet or provision of SS pan |
16 | Plumbing-1 PTMT Tap in each compartment , 200 Litre water Tank with water frame , required pipes & necessary fitments |
17 | Raised Platform for passage-Raised Platform for passage Width of the passage 4 ft Height of passage above ground level 225 mm antiskid block finish on passage only (wherever required) |
18 | Tap-1 PTMT Tap for each unit and 1 PTMT tap for each wash basin |
19 | Water Supply Connection-UPVC Pipe connection with all toilets interconnect and single inlet water supply point for toilet |
20 | Waste Management-Twin Leech pit with inspection chamber : 1000 mm dia and 1000 mm deep , made out of 40-50 mm thick concrete rings/brick work with sufficient holes for the leech pit to function effectively . 3 “ Thick RCC slab as top cover, made of 1:4:8 C:S:A MS rings to be provided for lifting of slab 1 Inspection Chamber :Soil Waste inspection chambers in 4 1/2 “ brick work with inside dimension as 375 mm x 375 mm x 300 mm depth . The same will be covered with a RCC top cover with MS hook . RCC cover will be 3” thick in 1:4:8 C:S:A inside surface of chamber will befinished with 10 mm thick cement plaster in 1:4 . The basewill be 3” thick PCC in 1:5:10 Required pipe connection between Toilet structure , IC and Leech Pit. |
21 | Civil Foundation Details-Foundation. Brick Foundation of size 200 mm x 200 mm with depth of 200 mm from ground lavel for anchor/column location . Pocket to be filled with PCC of 1:2:4 ratio after grouting of steel element of structure . Plinth of hight 300 mm to be done with 5” first class brickwork using 1:5 mortar in periphery for the platform of size 1.125 m x1.5 m . Filling and ramming of 150 mm using silver sand/good-earth. Single brick flat soling of 75 mm height on fielled – up area. Floorcastingof 75 mm thick PCC of 1:2:4 ratio above BFS . Outside plinth plaster 15 mm thick on brick –work with CM 1:5 .Stairs (2 Nos) of 250 mm wide x 900 mm long x 150 mm high . |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail