Ayodhya Farizabad Development Authority has published Appointment Of Executive Agency For Rejuvenation Of Samda Lake Ayodhya. Submission Date for this Tender is 07-04-2022. Lake Development Tenders in ayodhya Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demarkation of site i/c alignment & site clearing |
| 2 | Cleaning of water in jalkumbhi, garbage i/c as clearing the jungal. i/c uprooting the rank up to 30 cm i/c cartage extra 90 m (sl.no. 259+254) |
| 3 | Dewatering at site i/c arrngment of fule, pump etc complete L.M.R. |
| 4 | Excavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m. from the foundation trenches including all T&P phowarah and basket etc.complete. (Sl.no-251 |
| 5 | Excavation work as above but in wet consdition under water si no 258A |
| 6 | Earth work in exvacation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5 - 3.00 m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m. from the foundation trenches including all T&P phowarah and basket etc. complete. (Sl.No. 253+254) |
| 7 | Providing and laying in Cement concrete 1:4:8(1 cemeent: 4find sand :8 graded brick aggregate 40mm nominal size) and curing complete, including cost of form work in foundation and floors (sin-275) |
| 8 | Earth work in cutting or in embankment in ordinary soil excavation to be the form of regular pits not exceeding ½ meter (20”) in depth and earth work in enbankment to be in 20cm (8”) layers, including ramming and dressing the surface to required levels and slopes and also including 1.5m (5”) lift and 30m (100’) lead. The earth form cutting to be used in making embankent or to be deposited as spoil banks within 30m (100’) distance as directed by the E/I.Excluding Cost of Royalty including cartage of earth upto 3 km. & headlode extra 60 m. (Sl.No.-253 |
| 9 | E/W in cutting as item No-5 above but under water in wet condition si no 251+258 a |
| 10 | P/L compacting G-SB |
| 11 | S/L 80 mm thick ruber mouled cc interlocking paver block (6.7 MORT 1500 |
| 12 | M-150 brick work in 1:4 cement and coarse sand of 2.5 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work. (Sl.no.305 b) |
| 13 | M-150 b/w 1:3 cement & Concrete sand in foundation & Plinth complete (Sl.no.307A) |
| 14 | Providing and laying in Cement concrete 4:2:1 of not less than strength of M150stone ballast (20 mm nominal size) 2 apprroved coarsesand :1 Cement and curing complete,including cost of form work in foundation and floors (Sl.no. 283) |
| 15 | R.C.C. work with cement approved coarse sand and 2cm (3/4"") gauge approved srone ballast in the proportion 1:2:4 (1Cement: 6 aggregate) in lintels of doors and windows excluding supply of reinforcement and its bending but including its fixing and binding the same necessary with 24BWG binding wire and including necessary centering and shuttering etc. and also including supply of materials labour and tools and plants etc. required for proper completion of the work, strength of the concrete shall not be less than M-150 (Sl.no. 283) |
| 16 | DPC wirh 2.5 cm (1") thick and of cement concrete consisting of the part cement 1 ½ parts approve coarse sand and 3 parts approved 13mm (1 ½ graded stone grit and including water proofing materials as ordered by the Engineer-in-charge in the proportion as specified by the manufactures. (sl.no.v 361) |
| 17 | M-150 brick work in 1:4 cement and coarse sand of 2.5 fineness modulous mortar in super structure in 9" thick wall and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work.(sin no. 305 b+309+310) |
| 18 | Boring with hydrolic piling ring with power unit P/Installing cost in situ under reamed piles of 300mm dia below pile cape in M-25 grade cc exculding the coast of rain forsement but including the cost of boring with bentonite soluction complete DSR 203.1 |
| 19 | R.C.C. work with cement approved coarse sand and 2cm (3/4"") gauge approved stoneballast in the proportion 1:2:4 (1Cement: 6aggregate) in raft foundation excluding supply of reinforcement and its bending but including its fixing and binding the same necessary with 24BWG binding wire and including necessary centering and shuttering etc. and also including supply of materials labour and tools and plants etc. required for proper completion of the work, strength of the concrete shall not be less than M-150 (sl.no.287+ diffreance + 279A - 279B) |
| 20 | RCC work as iten no 13 above but 1:1½:3 in Bean Complete sin. 285 B |
| 21 | RCC work as iten no 17 above but 1:1½:3 in but for coloumn Complete sin. 289 |
| 22 | RCC work as iten no 17 above but 1:1½:3 in but for slab Complete sin. 284 B |
| 23 | Mild steel or iron in plan work shch as reinforced concrete or reinforced brick work(when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level. sin. 504 |
| 24 | Mild steel or iron work in heavy size such as trusses, build up gates record racks, roof work, gates etc wrought to required from including drilling holes riveting or welding where necessary and their fixing required for proper completion of the work.. sin no. 503 |
| 25 | Fencing work for GI link chain fencingas per aproved by E/E complete |
| 26 | 2 cm (3/4") thick cement plaster in dedo or skirting in 1:2 consisting of one part of cement and 2 parts of approved coarse sand laid in panels, finished with 3 mm (1/8") floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials, labour and T&P etc. required for proper completion of the work. (sl.no.-597) |
| 27 | 12mm. Thick plaster with cement mortar in proportion of 1:4 cement & coarsesand of 2.25 F.M. (sin. No 504+diff si 582-583) |
| 28 | 25 mm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 20 mm graded approved stone laid in panels finished with 3 mm. flooring coat of neat cement or cement and marble dust in 5:1 as specified over & including 75 mm. thick base concrete consisting of cement, local sand and brick ballast 40 mm gauge in the proportion of 1:4:8 and removing any over lapping mortar at the joints of panels if any and giving them a uniform finish including supply of all materials, labour and T & P etc. required for proper completion of the work. (sin no . 600 |
| 29 | S/F Vetrified floor tile 60x60 mm size complete dobule charge approved quality including 20 mm thick base morter 1:4 cement and coarse sand including supply of all materials, labout and T&P etc required for proper completion of the work (sin. No DSR 11.41.2) |
| 30 | Supply & fixing 6 mm thick approved China white/coloured glazed tiles in flooring or dado laid with 1:3 cement and approved coarse sand mortar finished and jointed with white cement slurry and pigment & polishing complete including supply of all materials, labour and T&P etc. required for proper completion of the work. (size of tiles upto 300 x 300 mm) (sin.in 628) |
| 31 | Supply & fixing of flush Doors commercial quality Conforming to I.S. 2202 Part I (1983) Including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges. Bolts locks, handles,springs. Fitting with necessary screws to be supplied departmentally. (a) 32mm thickr (sin.no. 470 a) |
| 32 | S/F Anonised Aluminium Fitting , A sliding bolt 16 mm 250 mm long (sin.no. 8-B-ii) |
| 33 | B. Door handle 100 mm long (sin.no. 8-c-ii) |
| 34 | P/A white cement based putty of average thickness 1 mm of approved make and quality over the plastered surface complete (sin.no. 30-DSR 13.80) |
| 35 | Painting or Vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & Two coat of approved superior ready mixed paint of clear syuthetic varnish including supply of all materials, labour and T & P etc. required forproper completion of work. Paint to be used should confirm to the I.S.I. No. 103 1950. (sin.in. 641+642) |
| 36 | Finishing wall with premium quality acrylic exterior paint withsillicon additives of required shade. New work (two coat) with preimming coat of exterior primer (apex ultima, etc approve quality i/c all laobur T&P for proper completion of work(sin.in. 23-DSR 13.47.1) |
| 37 | S/F Glazing aluminium window openable (DSR 21.1.2.2)i/c all laobur T&P for proper completion of work |
| 38 | Supply fixing 6inch dia MS Fan box |
| 39 | Supply fixing MS switch box 150x200x65mm |
| 40 | Providing wood work in door and window and other work S/F 65mm thick sal wood plank i/c all neacessary fasteneres, nut, bolt, etc. complete with primer coat DSR no. 9.1.2 for ruf funising complete as per direction by E/I |
| 41 | Supply provideing hut macking by bambo & Local material at circuler (LMAR) |
| 42 | S/Filling of sand in the plinth |
| 43 | S/P flat brick soling with state over burn brick |
| 44 | P/A letter painting as per E/I |
| 45 | S/F 100mm PVC pipe of 6 kg/cm bearing pressure complete with jointy laving, cliging.etc. i/c all laobur T&P for proper completion of work |
| 46 | S/F 15 mm B-Class GI pipe complete with all neacceary band T and etc C i/c all laobur T&P for proper completion of work(sin.no. DSR 18-10-1) |
| 47 | item as above S/F 20 mm B-Class GI pipe complete with all neacceary band T and etc C i/c all laobur T&P for proper completion of work(sin.no. DSR 18-10-1) |
| 48 | S/F HCI Nehani Trap 4" dia complete |
| 49 | S/F gate value of brass of approval quatity 20 mm complete. (SDR 18.17.1) |
| 50 | S/F orrisa pattern white glazce china W.C pan of size 580x440 mm size i/C builtin footrest& including 100 mm dia p trap with 10 ltr. Low level PVC flushing cistern i/c all necessary fitting complete. A.R |
| 51 | S/F white vitrous china flat back half stall urinal 580x380x350mm i/c all necessary fittingcomplete. |
| 52 | S/F white vitrous china partition wall for urinals of approval quatity. L.M.R |
| 53 | S/F white china round wash basin size 550*440 mm with 1500 mm DCP brass Piller Cock complete. (DSR17.17.3) |
| 54 | S/F CP brass bib cock heavy duty complete. |
| 55 | S/F 500 Ltr. Capicity PVC syntex Tank of approval quantity. (Rs. 7.25/Ltr.) |
| 56 | Wiring point for light with 1.5 mm PVC insulated single core coper cable in heavy duty conduite pipei/c all laobur T&P for proper completion of work (Sl.no. 131c) |
| 57 | Wiring point for plug with 1.5 mm PVC insulated single core coper cable in heavy duty conduite pipe i/c all laobur T&P for proper completion of work (Sl.no. 141c) |
| 58 | Wiring points above but for fan i/c all laobur T&P for proper completion of work(sl.no. 132) |
| 59 | S/ Wiring of sub main with 2 no 6mm2 PVC insulated coper cable i/c all laobur T&P for proper completion of work |
| 60 | s/f errection of solar street light i/c all laobur T&P for proper completion of work |
| 61 | s/f of cc bench as per approved by E/I i/c all laobur T&P for proper completion of work |
| 62 | s/f & erraction of tullo pump 1 kw complete i/c all laobur T&P for proper completion of work |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
