Ayodhya Farizabad Development Authority has published Appointment Of Executing Agency For Restoration Of Surya Temple At Surya Kund Ayodhya . Submission Date for this Tender is 21-03-2022. Building Work Tenders in ayodhya Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | SITE CLEARANCE |
| 2 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil |
| 3 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 4 | DISMANTLING & DEMOLITION |
| 5 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 6 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 7 | Removing of old lime plaster up to 75 mm thick in patches with height up to 4.5 m. Disposal up to 100-meter lead |
| 8 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 9 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineerin- charge. |
| 10 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 11 | For thickness of tiles 10 mm to 25 mm |
| 12 | For thickness of tiles above 25 mm and up to 40 mm |
| 13 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 14 | Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for separately), including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 15 | Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 16 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 17 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 18 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 19 | In lime mortar with old mughal bricks |
| 20 | In cement mortar |
| 21 | Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): |
| 22 | From brick work in lime mortar |
| 23 | From brick work in cement mortar |
| 24 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 25 | Of area 3 sq. metres and below |
| 26 | REPAIR / RESTORATION |
| 27 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. |
| 28 | Applying two or more coat of Ethyl Silicate chemical as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with brush or spray on the existing stone masonry surface till there is no further absorption of chemical by stone surface, including protecting the applied surface from direct sunlight by suitable means during application, all complete as per direction of the Engineer-in-Charge (The rate is inclusive of all materials & labours involved except scaffolding). |
| 29 | Applying breathable, non-reactive, antifungal, and water repellent Silane/Siloxane chemical as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacture, diluted with solvent mineral Turpentine oil in the ratio of 1:12 (One part of approved chemical :12 Part of Turpentine oil), on the existing sand stone masonry surface with two or more coats to give uniform application of chemical on the surface, all complete as per direction of Engineer-In-charge (The rate is inclusive of all materials & labours involved except scaffolding). |
| 30 | Repairing of .5mm to 5 mm wide open joints / cracks in all types of sand stone masonry work including scrapping of loose jointing material from cracks. The inner side to be filled/pointed with polymer mixed lime mortar with wooden trowel and fixing grouting nipple from outer side as directed by Architect. Then apply polymer-based lime mortar by injection grouting through 5mm diameter nozzle through the pre fix nipple up to total thickness of existing stone wall and removing the PVC nipple pipe, lime mortar of mix lime & sand 1:1 mix with polymer using katha or other additives to achieve require matching colour and including cost of all materials, labour, machinery, equipment, curing and cleaning the site as directed |
| 31 | Providing and fixing chicken wire mesh (6mm x 6mm) of 24-gauge 200 mm wide along the joints of brick work with hooks/nails etc. complete so as to receiving the plastering work over chicken mesh as per the direction of Engineer-in-charge. |
| 32 | Stitching of cracks in brick masonry with stone lintels of 450x 200x50 mm. Chasing, grooving the brick masonry and inserting the stone lintel. All around the stone, lime mortar should be properly packed. |
| 33 | Supplying and providing of two components poly sulphide sealant containing solid contents, confirming to standard specification and approved compatible primer, for priming vertical faces prior to application of poly sulphide sealant including all labour charges for sealing of expansion joints after drill mixing of two components sealing compound. Cleaning and preparation of expansion joint using wire brush sand papering with emery paper and filing with suitable mechanical means. The work includes racking and cleaning of joints, sticking, debonding tape on bottom of joint, applying primer on edges, using masking tape on edges, providing of sealant and removal of masking tape immediately after providing sealant in joint. |
| 34 | To vertical joint between RCC columns, bricks & stone masonry in size 40 mm width and 12 mm depth, including providing back up material (Thermocoal foam) if required. |
| 35 | Lime plaster (up to 40 mm thick in 3 Coats) on new surface on walls with lime sand mortar 1:2 (1 lime putty: 2 sand) using admixture like Gur, Methi & Gugal @ 1.0 Kg. /Each for every 10 Sqm of area including racking of joints curing etc. complete |
| 36 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 37 | Sal wood |
| 38 | Providing and fixing double leaf door wooden shutters made of Ist grade wood as per traditional design (Deshi pattern) planks thickness 40mm and width of Binies, Andheri 50mm and 35mm, including Adwa etc. with fittings (nails, sankal, kunda, cheri, handle and patti etc.) as per existing matching/ as per approved design with moulding/ carving complete in all respect : |
| 39 | M.P teak wood grade Ist |
| 40 | Vaulted roofing (Ladao) with grinded lime sand/Surkhi mortar prepared as per traditional practice including centering shuttering (Dhoola) the layer of lime mortar and brick bats/stone should 25 cm thick and each layer should be done after 1 week complete with top finishing. |
| 41 | Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in- charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : |
| 42 | Agaria White |
| 43 | Black Zebra |
| 44 | To expose the original surface of stone art / Chiseling work / Fresco paintings /tempera painting carefully by removing upper coatings of whitewash /paint / distemper / plastering / wooden and metal frames etc. without any harm to the original hidden art work & further strengthen the original art work with a suitable coating of preservative and making it water tight as per direction ofEngineer-In charge. |
| 45 | Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 coarse sand) with 12 mm diameter anchoring steel bar, 45 cm long, fixed in each stone and supported on and including with bricks cove in cement mortar 1:4 (1 cement : 4 coarse sand), including pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : Chunar sand stone : |
| 46 | With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 47 | Providing and fixing red sand stone brackets 55x22.5x45 cm sunk and moulded including providing and fixing with 4 Nos gun metal cramp 25x6 mm 30 cm long |
| 48 | Making Mehrab"s, Arches, pillars, highly decorative creepers, flower of small sizes etc.in lime Surkhi plaster (1:2) as per B248old traditional practices (Arches, Mehrab"s) in three coats for base course and subsequent course and Loi tamping, beating till the shrinkage cracks are disappear than making ornamental flowering/design etc. The work is to done with all leads and lifts as per work of restoration nature as per Jaipur practice. |
| 49 | Add extra over item no. 20.5 to 20.6 for Lime plaster work done over Spherical or groin ceiling/ladao ceiling of domes. |
| 50 | Add extra over item no. 20.5 to 20.6 for Lime plaster work done over curved/circular masonry work (curved or circular surface.) |
| 51 | Scraping & removing of white wash/ distemper/oil paint /algli etc. from lime plaster highly decorative, ornamental and stucco work with at most care by using fine sand paper under the close supervision to keep intact the old designs. |
| 52 | Stucco work in lime, Surkhi, mortar (1:2) as per existing design work/ traditional practices by skilled craftsman, the stucco work should be done as per restoration nature, the mortar should be prepared by grinding mill adding gur, methi & gugal. The thickness varies from 50 mm to 100mm as per the design (minimum rectangular surface area to be measured). |
| 53 | Painting on Stucco work with stone colours including base coat of khameera as per traditional practice (minimum rectangular to be measured). |
| 54 | Coloured Araish work 1: 2 (1-lime putty: 2-Zikki) over lime plaster or plain back ground including preparation of lime for 6 months by slaking of lime with curd and changing the water every week. The kara plaster of not more than 6 mm thick is to be left for maximum of 3 months to appear the shrinkage & temperature cracks over the kara plaster 2 mm layer of grinded lime putty is to be done and is to be rubbed gently by Akik stone then inserting the design of colour border/ flowers/pictures etc including desired colour stone pigment to match the existing design/pattern after this, applying Khopra paste & rubbing with cloth to give a uniform picture. The work to be executed strict as per direction of Engineer In-charge |
| 55 | 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. |
| 56 | White sand stone |
| 57 | Supplying chemical emulsion in sealed containers including delivery as specified Chlorpyriphos/ Lindane emulsifiable concentrate of 20% |
| 58 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. |
| 59 | Providing & applying Lime kara 1:2 (1 lime cream: 2 Zikki powder) grinding mortar with grinding mill/manually on lime base, on ceiling and all flat surface in two coats. First coat applying 3 mm to 4 mm thick and curing properly at least 7 days, second finishing coat done after 7 days of previous coat as per traditional practice. (Thickness not more than 6 mm.) |
| 60 | Add extra for Lime Kara work (on lime plaster base) other than flat surface as per traditional practice with all lead & lift with fine finishing complete in all respect on: |
| 61 | Domical surface/spherical/domical ceiling. |
| 62 | Curved surface. |
| 63 | Providing & applying "Lime Kara on stone work only" having carving stone work /decorative stone work (stone pillars, stone arches, railing etc.) as per traditional practice, as per specifications with grinded mortar in two coats with finishing complete in all respect. |
| 64 | Stone work (Machine cut edges with ornamental stone work) for wall lining (Veneer work) upto 10m height, backing filled with a grout of average 12 mm thick lime mortar 1:2 (1 lime : 2 coarse sand) including pointing in lime mortar and an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red Sandstone 70mm thick |
| 65 | SITE DEVELOPMENT |
| 66 | Supply and installation of Informational signage as per specification and drawing attached including all material labour fixtures and civil work foundation work required to complete the work in all respect and as per the direction of Architect-In-Charge. |
| 67 | Providing and fixing of Double Arm Polelight made of 3m. Stepped pole made of G.I. Pipe with Top dia 76.1mm, bottom dia 139.7mm duly PU painted with in-built service window, base plate 300mm x 300mm x 12mm with foundation bolts of 300mm x 12mm x 4no.s. Supply of double arm bracket 1m. MF37, Street light fixture made Aluminium sheet housing fitted with polycarbonate cover fitted with reflector (integral) - MF-MVF-507, 85W CFL (Without lamp) of approved make and design |
| 68 | Providing & Fixing in position 72" width (3-seater) of Cast iron antique garden bench where side brackets are made out of cast iron & seating with Indian teak wood of DINCAST (DCB001) or equivalent make made of superior quality anti-corrosive material, finished with 2 coats of red-oxide and 3 coats of superior enamel paint, make and quality to be approved by Architect / Engineer - in – Charge |
| 69 | Supply & Installation of FRP Dustbin with canopy mounted on MS Stand of section 50x25x2.0 mm, capacity of drum - 80 Ltrs, complete in all respect (Dual Dustbin as per direction and approval of Architect - in - charge.). |
| 70 | Providing and finxing in place of planter of size 1m.x 1m.x 0.45m. made of brick work in common burnt clay with chunar sandstone cladding 20mm thick, backing filled with grout of average 12mm thick cement mortar 1:3 (1 cement: 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade |
| 71 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. |
| 72 | Supply, Installation, Testing and Commissioning of LED RGB/RGBW floodlighting luminaire for facade lighting with Die-cast aluminium housing, powder-coated finish, of following wattage. Luminaire shall be capable of producing dynamic color changing light for with 16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100-270 V AC, 50 Hz with power factor > 0.9 . Fixture shall be suitable to operate at an ambient temperature range of - 10°C to +50°C and shall be IP 65 and IK 06 rated. Lifetime shall be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS (IS 10322) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. |
| 73 | 45 W/40 W |
| 74 | Supply, Installation, Testing and Commissioning of LED RGB/RGBW Linear Wall Washer luminaire for Facade lighting with aluminium extruded housing, of following wattage. Luminaire shall be capable of producing dynamic color changing light with 16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100 to 270 V AC, 50 Hz, power factor > 0.9 . Fixture shall be suitable to operate at ambient temperature range of -10°C to +50°C and shall be IP 65 and IK06 rated. Lifetime should be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. |
| 75 | 25 W |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
