Military Engineer Services-MES has published Addn / Altn To Building No P-63 At Afs Digaru. Submission Date for this Tender is 21-02-2022. Building Work Tenders in digaru Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 14-Feb-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-02-2022 |
| Sl. No. | Item Description |
| 1 | B/R Works:- Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing rubbish off the premises complete all as specified and directed. |
| 2 | Taking down chowkats or frames exceeding 1.5 SQM but not exceeding 4 SQM in each (without taking off shutters from the frame) complete all as specified and directed. |
| 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 4 | Demolition of brick/stone massonry work built in cement mortar as in wall including all quoins, arches, pillars etc complete all as specified and directed. |
| 5 | Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5m in depth for foundation etc and getting out in soft/loose soil complete all as specified and directed. |
| 6 | Excavation in trenches n.exc. 1.5 m wide and exc. 1.5m but n. exc.3.0m in depth for foundation etc and getting out in soft/loose soil complete all as specified and directed. |
| 7 | Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25 Cm in soft/loose soil complete all as specified and directed. |
| 8 | Removing excavated material(Soil) to a distance not exceeding 50mand depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed. |
| 9 | M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundations filling and mass concrete complete all as specified and directed. |
| 10 | Form work to sides of concrete foundations, footings, bases of columns and plinth beams, and similar work, vertical or to batter, flat, for rough finished surface of concrete complete all as specified and directed. |
| 11 | Form work to sides of pillars, post, struts, and columns of square, rectangular or polygonal for rough finished surface of concrete complete all as specified and directed. |
| 12 | Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves etc. flat, for rough finished surface of concrete complete all as specified and directed. |
| 13 | Form work to soffits of suspended slab such as roor slab, floor slabs, landings and similar works, not exceeding 200mm thick(horizontal or sloping) flat for rough finished surface of concrete complete all as specified and directed. |
| 14 | Form work to chullah hood, chajjas, troughs and similar items flat including edges for rough finished surface of concrete complete all as specified and directed. |
| 15 | Form work to fins, louvers, fascia curved for rough finished surface of concrete complete all as specified and directed. |
| 16 | M&L for TMT bars 10 mm dia & over,cut to length, bent to shape as required including cranking, bending and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and directed. |
| 17 | M&L for TMT bars 6 mm to 8 mm diacut to length, bent to shape as required including cranking, bending and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and directed. |
| 18 | M&L for TMT bars 5 mm to 10 mm diacut to length, bent to shape as required including cranking, bending and binding with mild steel wire(annealed) not less than 0.9mm dia as in stirrups, spacer, lateral ties complete all as specified and directed. |
| 19 | M&L for RCC M-25 design mix using 20 mm graded crushed stone aggregate as in foundation, foundation beam, plinth beam, bases for columns, etc., complete all as specified and directed. |
| 20 | M&L for RCC M-25 design mix using 20 mm graded crushed stone aggregate as in column, pillar posts, etc., complete all as specified and directed. |
| 21 | M&L for RCC M-25 design mix using 20 mm graded crushed stone aggregate as in slab supported on walls, beam and columns in floor, landings, shelves, and the like, complete all as specified and directed. |
| 22 | M&L for RCC M-25 design mix using 20 mm graded crushed stone aggregate as in beam, lintel over 1.5m span, complete all as specified and directed. |
| 23 | M&L for RCC M-25 design mix using 20 mm graded crushed stone aggregate as in chajja, complete all as specified and directed. |
| 24 | Brick work with old size, sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 25 | Half brick thick wall with old size, sub class ‘B’ bricks (locally available best quality) straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and directed. |
| 26 | Materials and labour for rendering 20mm thick intwo layers (12+8), in cement mortar (1:4) mixed with integral water proofing compound in second layer as per manufactures instructions on other than fair faces of brick walls or concrete surface complete all as specified and directed. Note:-WPC shall be measured and paid separately |
| 27 | Supply only liquid water proofing compound ISI marked. . |
| 28 | Materials and labour for rendering 15mm thick in cement mortar (1:6) on faces of brick walls or concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 29 | M&L for rendering 5 mm thick in cement mortar (1:3) as in ceiling, finished even and smooth without using extra cement complete all as specified and directed. |
| 30 | S&F 20mm dia curtain rails of stainless steel, complete all as specified and directed. |
| 31 | S&F decorative type curtain rail brackets suitable for 20mm dia SS curtain rail,complete all as specified and directed. |
| 32 | S&F venetian blind complete with aluminium channel, roller and all other complete assessories, complete all as specified and directed. |
| 33 | M&Lfor preparation of newly external plastered surfaces and applying two coats of acrylic smooth exterior paint of approved shade applied @ 1.67 lit/10 sqm over and including priming caot of exterior primer applied @ 2.20 kg/10 sqm complete all as specified in manufacturer instruction and as directed . |
| 34 | Complete removal of existing treatmentof external wall surfaces and applying two coats of acrylic smooth exterior paint of approved shade applied @ 1.67 lit/10 sqm over and including priming caot of exterior primer applied @ 2.20 kg/10 sqm complete all as specified in manufacturer instruction and as directed . |
| 35 | M&L for preparation of newly plastered surfaces of internal wall and applying two coats of plastic emulsion paint over a coat of alkaline resistant primer over wall care puttycomplete all as specified and directed. |
| 36 | Complete removal of existing treatmentof internal wall surfaces and applying two coats of plastic emulsion paint over a coat of alkaline resistant primer over wall care puttycomplete all as specified and directed. |
| 37 | S&F anodisedpowder coated aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc complete all as specified and as directed. |
| 38 | M&L for anodized powder coated aluminium push pull type partly paneled and partly glazed door shutter having top rail of section 85.00mmx44.45mmx2.00mm, bottom rail of section 85.00mmx44.45mmx2.00mm thick, door verticals of section 44.45mmx44.45mmx2.00mm thick and lock rail of section 85.00mmx44.45mmx2.00mm thick , including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle and brass mortice lock 4 lever etc. complete all as specified and as directed. |
| 39 | S&F anodised powder coated aluminium window shutters without sash bars of section 37.5x15x1.6mm, slidingtype,with three track frame of section 45.2x35x1.3mmincluding necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, locking system etc., complete all as specified and directed. |
| 40 | S&F 5.5mm thick plain sheet glass, selected qualityin square/ rectangular exceeding0.50sqm ineach pane fixed to aluminium window/door complete all as specified and directed. |
| 41 | S&F 4mm thick frosted glass, plain/pin headed type fixed to aluminium frame in square not exceeding0.50sqm ineach pane complete all as specified and directed. |
| 42 | S&F 12mm thick toughened glass, in square/ rectangular exceeding0.50sqm ineach pane fixed to aluminium window/door/partition, complete all as specified and directed. |
| 43 | S & F anodised aluminium grill of approved design and pattern with thickness of wire not less than 6mm, fixed to existing window frame with stainless steel screws with anodised aluminium standered sections including cutting to proper opening size complete all as specified and directed. |
| 44 | S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 45 | S&F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 46 | S&F factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stills and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ scaled to the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement as per drawings and specifications as catered in SSR Part – II 2004 complete all as specified and directed. |
| 47 | S&F 75 mm butt hinges medium weight cold rolled mild steel complete all as specified and directed. |
| 48 | S&F 125mm in size aluminium handles, cast type, anodised complete all as specified and directed. |
| 49 | S&F 150mm long aluminium anodised barrel tower bolts 12 mm dia of extruded section complete all as specified and directed. |
| 50 | S&F 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to aluminium frame work, complete all as specified and directed. |
| 51 | S&F40mm dia cupboard knobs fixed with nuts, screw and washer of brass polished complete all as specified and directed. |
| 52 | S&F Extruded brass handle, fabricated type polished, 100mm long complete all as specified and directed. |
| 53 | S&F continuous piano hinges, brass, bright finish, width of flaps when open 40mm, complete all as specified and directed. |
| 54 | S&Faluminium ( die cast) body door closer hydraulically regulated regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg , complete all as specified and directed. |
| 55 | S&Fdouble action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty , complete all as specified and directed. |
| 56 | M&L for stainless steel railing made out of hollow tubes(Grade 304), SS channel, plates etc. including welding, grinding, buffing, polishing and making vurvature(where required) or fixing the same with necessary SS nut, bolts, fixing accessories of required size with suitable arrangement complete all as specified and directed by Engr-in charge. |
| 57 | S&F vitreous china one piece water closet with seat cover size 72cmX37cmX72cm star white , complete set with all necessary fittings all as directed by Engr-in-Carge. Make: Hindware CAT No. 92089 (P-18) or equivalent in CERA/PARRYWARE/JAQUAR/PRAYAG |
| 58 | S&F Urinal flat back large size 37.5cmX39cmX59cm star white with flush tank including all necessary accessories complete all as directed by Engr-in-Carge. Make: Hindware CAT No. 60002 or equivalent in ESSCO/PARCO/CERA/JAQUAR/PRAYAG |
| 59 | S&F Wash Hand Basin oval type size 56cmX41cm star white, vitreous china for counter top complete all as directed by Engr-in-Carge. Make: Hindware CAT No. 10017 or equivalent in CERA/PARRYWARE/JAQUAR/PRAYAG |
| 60 | M&L for 20 mm thick black Granite (of any type) work (table rubbed and polished), bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified anddirected. |
| 61 | S&F CP two way bib tapwith wall flange complete all as directed by Engr-in-Carge. Make: Hindware CAT No. F440004/Jaquare:MQT-512AN. |
| 62 | S&F health foucent ABS body with 8mm dia,1.2mtrlong flexible tube and wall hook complete all as directed by Engr-in-Carge. Make: Hindware CAT PAT No. F160112/Jaquare:ALD-IVC-593 . |
| 63 | S&F brass CP Toilet roll holder with wall flange complete all as specified and directed. |
| 64 | S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 65 | M&L for cast iron Nahani trap of 75mm with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) , complete all as directed. |
| 66 | S&F Grating doom 100mm dia ofPTMT (minium weight 25gms) complete all as specified and directed. |
| 67 | S&F Waste coupling of PTMT (half or full threaded)for bore of discharge pipe 32mm(minium weight 45gms) complete all as specified and directed. |
| 68 | S&F Waste coupling of PTMT (half or full threaded) suitable for urinalsfor bore of discharge pipe 32mm (minium weight 45gms)complete all as specified and directed. |
| 69 | S&F Bottle trap of PTMT having minimumwater seal of 25mmfor bore of discharge pipe 32mm (minium weight 260gms)complete all as specified and directed. |
| 70 | S&F High density polyethylene pipes (HDPE) of pressure rating 6kgf/cm2, 50mm dia laid in trenches/floor, complete all as specified and directed. |
| 71 | S&F 15mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered "HOT" or "COLD" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. |
| 72 | S&F brass CP wall mixer 15mm bore for hot and cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 73 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood fixed with chrimium plated screw and and cup washercomplete all as specified and directed. |
| 74 | S&F bevelled edge mirror (frame less) of size 24"x36" selected quality glass 5.5mm thick fixed with chrimium plated screw and and cup washercomplete all as specified and directed. |
| 75 | Supply and fix brass chromium plated tubular towel rail 600mm long 19/20mm dia with CP brackets both ends fixed with SS csrews complete all as specified and directed. |
| 76 | S&F Towel Ring of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90 gms) complete all as specified and directed. |
| 77 | Supply and fix stop cock/angular stop cock fancy type, chromium plated, (concealed type) screwed down, screwed for iron pipes , 15mm bore, complete all as specified and directed. |
| 78 | M&L for Vitrified Ceramic tiles, light shade 10mm thick (Square/rectangular) polished, area of each tile exceeding 0.42 sqm but notexceeding 1.00 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick screed bedin Cement Morter (1:6) complete all as specified and directed. |
| 79 | M&L forVitrified Ceramic tiles, light shade 10mm thick (Square/rectangular) polished, area of each tile notexceeding 0.36 sqm, in skirting etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick renderingin Cement Morter (1:4) complete all as specified and directed. |
| 80 | M&L forColoured joint free non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but notexceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick screed bedin Cement Morter (1:6) complete all as specified and directed. |
| 81 | M&L forColoured joint free non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but notexceeding 0.18 sqm, in skirting etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick renderingin Cement Morter (1:4) complete all as specified and directed. |
| 82 | S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including hangers 6mm dia GI (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm longcompleteall as specified and directed. |
| 83 | M&L for 10mm thick seamless calcium silicate ceiling made out of 1800x1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish complete all as specified and as directed (frame work for ceiling shall be measured and paid seperately). |
| 84 | M&L for preparation of new ceiling surfaces and applying two coats of oil bound distemper after applying primer over wall care putty complete all as specified and directed. |
| 85 | Spreading, levelling and ramming in floors in layers n exc. 25 cm including well ramming and watering as required complete all as specified and directed. |
| 86 | M&L for 25mm thick plain cement concrete 1:2:4, type B0 (usig 12.5mm graded aggregate) as in floor complete all as specified and directed. |
| 87 | M&L for 75mm thick plain cement concrete 1:4:8,type D2, (usig 40mm graded aggregate) as in sub base of floor complete all as specified and directed. |
| 88 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 89 | M&L for hardcore of gauge n exc. 63mm, using broken stone or boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 90 | M&L for 75mm thick plain cement concrete (1:3:6) type C2 using 40mm graded crushed stone aggregate as in plinth protection, finishing surfaces even and smooth without using extra cement, laid in alternate bays, joints between panels & wall shall be filled with mastic filling of sand & bitumen 85/25 grade using 3 part of dry sand and one part of bitumen complete all as specified and directed. |
| 91 | M&L for 40mm thick cement concrete 1:2:4, type B0 (usig 12.5mm graded aggregate) mixed with water proofing compound as per manufacturer instruction as in Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.(Note: WPC shall be measured and paid seperately as supply only) |
| 92 | Cutting existing steel tubing and screwing for alterations or additions of 20mm bore pipe completeall as specified and directed. |
| 93 | Supplying and laying of 20mm outer dia CPVC pipes , SDR 11 & plain CPVC SDR 11 fittings in trenches completeall as specified and directed. |
| 94 | Supplying and laying of 16mm outer dia CPVC pipes , SDR 11 & plain CPVC SDR 11 fittings in walls/ceiling or laying in floors completeall as specified and directed. |
| 95 | S&F gun metal gate valve with iron wheel head, screwed both ends for iron pipe of size 20 mm dia, complete all as specified & directed |
| 96 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type b-1 smooth finished, and reforming benching as required (internal dia of pipe 100mm) completeall as specified and directed. |
| 97 | S&F 75mm dia PVC (SWR) pipes grade "A", single socketed in any length with rubber ring joints, fixed to wallas rain water pipe includingMS clamp of suitable sizecomplete all as specified and directed . |
| 98 | S&F 110mm dia PVC (SWR) pipes grade "A", single socketed in any length with rubber ring joints, laid in floor/trenchescomplete all as specified and directed . |
| 99 | M&L for PCC (1:3:6), type C2 (using 40 mm graded aggregate) as in bed to drain pipes 150 mm bore in packing under and haunching against the sides of pipes after they are laid and tested all as specified and directed. |
| 100 | S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed . |
| 101 | S&F 75mm dia PVC (SWR) junction single, (single T) equal or unequalcomplete all as specified and directed . |
| 102 | S&F 75mm dia PVC (SWR) vent cowl complete all as specified and directed . |
| 103 | S&F 110mm dia PVC (SWR) WC connector with lip ringcomplete all as specified and directed . |
| 104 | S&F 100mm dia cast iron trap "P" or "S"complete all as specified and directed . |
| 105 | Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same toa distance exc. 50 m and n. exc.100m including roughening ofold concrete surface of roofby wire brushing and cleaning the surface to remove all loose dustcomplete all asdirected. |
| 106 | M&L for 15 mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane, finished even and smooth without using extra cement complete all as specified and directed. (NOTE : Polymeric membrane shall be measured and paid separately under relevant item ). |
| 107 | M&L for water proofing treatment with APP based polymeric membrane comprising with the following courses of treatment/ specification from bottom to top complete all as specified and directed:- (a)Applying bitumenous primer @ 0.25 ltrs/ sqm over plastered surfaces of roof including parapet surfaces. (b)Over the priming coat 3mm thick APP based polymeric membraneweighing not less than 3.50Kg/Sqm reinforced with polyster non woven fabric weight not less than 160 gms/sqm. Membrane shall be taken to a height of 60cm (min) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note:-(i) Laying of APP based polymeric membrane shall be done thermo fused by flame torch all as per the method of manufacturers instructions. (ii) A minimum overlap of 100mm and75mmshall be given at the end and sides of the membrane respectively and sealed all overlaps and joints as per manufacturer"s instruction. (c)Applying two coats of aluminium paint over APP membrane @ 100 gms /sqm. Make of APP membrane:-Dr Fixit manufactured by M/S Pidilite Industries/ MOPLY FP 3MM manufactured by M/S Texsa India Limited/ Hyperplus by IWL India Ltd. |
| 108 | M&L for treating the backfill in contact with foundation at the rate of 7.5 liters of emulsion per square meter of verticle surface (area of the sub structure in contact with backfill to be measured) complete all as specified and directed . |
| 109 | M&L for treating the top surface of filled earth at the rate of 5 liters of emulsion per square meter of surface complete all as specified and directed . |
| 110 | M&L for treating the soil under plinth protection at the rate of 5 liters of emulsion per square meter of surface area complete all as specified and directed . |
| 111 | S&F rotational moulded polyethylene water storage tank 1000 litre capacity ISI market of three layered wall construction (Cylindrical, vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I including connecting outlets & inlet pipes complete all as specified and directed. |
| 112 | S&F 20 mm dia ballvalves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 grams) complete all as specified and directed |
| 113 | E/M WORKS Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, complete all as directed. |
| 114 | Materials and labour for concealed point wiring with 1.50 sq.mm. FRLSPVC insulated and unsheathed multistranded copper conductor cable 1100 Volts grade, single core, drawn through and including PVC conduit 20 mm dia(medium grade) complete with all fittings and accessories, fixed to walls/ceiling, including factory made sunk type mild steel metal flush boxes 1.25 mm thick (wall thickness) conforming to IS suitable for mounting modular switches/ sockets/regulator etc. on white cover plate and frame, 1.50 sq.mm FRLS PVC insulated, unsheathed multistranded copper conductor cable 1100 Volts grade, single core, green in colour for earth continuity conductor connected to common earth dolly for One light point/ One fan point/bell point controlled by one switch including cutting chases for concealed conduit pinning in making good to facingand disturbed surfaces using cement mortar 1:3complete all as specified and directed. |
| 115 | All as per item No 114 here-in before but for one 3 pin, 5 Amp socket point on the same board with other switch, complete all as specified and directed. |
| 116 | All as per item No 114 here-in before but for one 3/5 pin, 16 Amp switch socket combination on independent board with 4 sqmm PVC insulated unsheathedmultistranded FRLS copper conductor, complete all as specified and directed. |
| 117 | S&F modular switch, 6A-SP-1 way, 1 module, complete all as specified and directed. |
| 118 | S&F modular socket shuttered, 6A-3 pin, 2 module, complete all as specified and directed. |
| 119 | S&F modular switch, 16A-SP-1 way, 1 module, complete all as specified and directed. |
| 120 | S&F modular switch socket unit, 16A, 4 module, complete all as specified and directed. |
| 121 | S&F modular socket shuttered, 6/16A-3 pin, 2 module, complete all as specified and directed. |
| 122 | S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body, complete all as specified & directed. |
| 123 | S&F modular white cover plate with frame , 6 module, complete all as specified and directed. |
| 124 | S&F modular white cover plate with frame , 3 module, complete all as specified and directed. |
| 125 | S&F modular fan step regulator 120 watts, 2 module, complete all as specified and directed. |
| 126 | S&FLED tube light fittings , 18/20 W four feet, with high quality extruded polycarbonate housing & integrated LED driverwith decorative end capswith all accessories internally pre-wired, connecting up with twin core twisted flexible copper conductor cable with suitable sizecompleteall as specified and directed. |
| 127 | S&FLED morror light fittings , 10 W two feet, with high quality extruded polycarbonate housing & integrated LED driverwith decorative end capswith all accessories internally pre-wired, connecting up with twin core twisted flexible copper conductor cable with suitable sizecompleteall as specified and directed. |
| 128 | S&FLED recessed mounted round slim , elegant and stylish down light fittings , 12 W , 220 VAC with high efficiency PMMA diffuser soft glare free light completewith driver suitable for fixing in ceiling including connecting up with twin core twisted flexible copper conductor cable with suitable sizecompleteall as specified and directed. |
| 129 | S&FLED recessed mounted round slim , elegant and stylish down light fittings , 6 W , 220 VAC with high efficiency PMMA diffuser soft glare free light completewith driver suitable for fixing in ceiling including connecting up with twin core twisted flexible copper conductor cable with suitable sizecompleteall as specified and directed. |
| 130 | Taking down carefully unserviceable switch fuse unit/ MCB DB with MCB/MCCB etc for necessary repair/ replacement and reuse at site , complete all as directed. |
| 131 | S&F MCB DB , SPN8 way, double door with 200 Amp rated bus barwith earth andneutral link ,complete with fixing accessories including taking down old unserviceable DB all as specified and directed. |
| 132 | S&F miniature circuit breaker (MCBs) single pole and neutral, 240 Volt, 32 Amps, "C" series,10 KA breaking capacity, complete all as specified and directed. |
| 133 | S&F miniature circuit breaker (MCBs) single pole and neutral, 240 Volt, 40 to 63 Amps, "C" series,10 KA breaking capacity, complete all as specified and directed. |
| 134 | Supply and fix miniature circuit breaker (MCBs) single pole, 240Volt, 10KA, 6 to 32 Amps, ‘C’ curve complete all as specified and directed. |
| 135 | Taking down unserviceable sub main wiring of any size including PVC conduit/casing caping and removing from site, making good the disturbed surfaces of wall , complete all as directed. |
| 136 | M&L for sub main wiring with 2 runs (Phase Neutral) of single core 4.0 sqmm (Nominal area) stranded FR PVCinsulated unsheathed copper conductor cable 1100 volts grade drawn through and includingPVC conduit including 1 x 4.0 sqmm (Nominal area) FR PVC insulated unsheathed stranded copper conductor green incolour for earth continuity conductor and connected to common earth dolly complete all as specified and as directed. (Note: Two runs of 4.0 sqmm cable and one run of 4.0 sqmm earth continuity conductor including PVC conduit with plastic terminal boxes shall be measured as one run length). |
| 137 | Taking down carefully and keeping the same safe location for reinstallation of the following items after rewiring of complete room, complete all as directed. (i) Geyser-01 No,(ii) Ceiling Fan-01 No, (iii) Exhaust Fan-01 No. |
| 138 | S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V 1400mm sweep, min air delivery 245 CFM with service valu 6.0 BEE. 5 star rated with brushless direct current motor(BLDC) complete all as specified and directed. |
| 139 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed conduit wiring, etc. cutting not exc 10cm girth,complete all as specified and directed |
| 140 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. |
| 141 | S&F electric water heater, storage type ABS body with Glassline coated inner tank and heating element upto 2KW capicity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, Connction piece etc.complete all as specified and directed |
| 142 | Supply and install hi wall split units indoor/ outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 2.0 TR complete all as specified and directed. Make: Voltas/Blue Star/Dikin. |
| 143 | Supply and install voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 volt to 270 volt with output votage stabilized at 230 volt with accuracy of + 2.5% of capacity 3KVA complete all as specified and directed. Make: V-Guard VG-500 or equivalent as approved. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
