Military Engineer Services-MES has published Special Repair To Bldg No. P-7 , P-14 , Toilet Block And Record Room At 26 Nehru Road And Certain Other Sanctioned Work Under Ge ( East ) Lucknow ( Second Call ) . Submission Date for this Tender is 10-02-2022. Building Repair Tenders in lucknow Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 03-Feb-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 10-02-2022 |
| Sl. No. | Item Description |
| 1 | Demolition of brick or stone/boulder masonry built in cement mortar complete all as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floor and paving not exc 15 cmbelow or above GL complete all as specified and directed. |
| 3 | Demolition of Reinforced Cement Concrete incl cutting of reinforcementof parapet wall situated up to height of12.00 m from GL through necessary equipment /devices and necessary scaffolding/props without damaging existing structureof any description and in any position not otherwise specifically provided, complete all as specified and directed. |
| 4 | M&L for repairof RCC projections chajjas, roofs, facia etc up to height of 12.00mfrom existing GL, necessary preparation, scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregateand reinforced with chicken wire mesh incl necessary formwork and rendering incement mortar 1:3 using coarse sand and thickness of RCC member not exc 150mm, complete all as specified and directed. |
| 5 | M&Lfor Pre-cast cement concrete block of 1:2:4 masonry with solid blocksM-15 grade size of block as per site requirement in CM 1:4, with necessary form work/moulding complete all as specified and directed. |
| 6 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and directed. |
| 7 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but not exc 4 sqm eachcomplete all as specified and directed. |
| 8 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area n.exc 1.5sqm eachcomplete all as specified and directed. |
| 9 | Roughining surface of old concrete floor by picking ,sweeping cleaning and washing down with water to remove dust etc.and brushing neat cement sluury with 3.0 kg of cement per sqm complete all as specified and directed. |
| 10 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including racking out joints hacking for key scrubbing down with water etc,complete all as specified and directed. |
| 11 | Surface excavation not exc 30cm deep and averaging 15 cm deep in soft/loose soil complete all as specified and directed. |
| 12 | Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc. or for shafts, well, cesspits, manholes, peir holes, etc. not exc 10 Sqm on plan and getting out in any type of soil complete all as specified and directed. |
| 13 | M&L for brick work with Sub class "B" fly ash bricks straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified and directed. |
| 14 | Returning, filling in, including spreading, leveling watering and well ramming in layers n.exc 25cm in hard/dense soil complete all as specified and directed. |
| 15 | Removing excavated materialto distance n exc. 50mtr and deposited where directed at level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 16 | M&L RCC 1:2:4 type B-1 ( using 20mm graded stone aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves complete all as specified and directed. |
| 17 | M&L for mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with mild steel (annealed) wire not less than 0.9mm dia complete all as specified and directed. |
| 18 | M&L for mild steel TMT bars6 mmto8 mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with mild steel (annealed) wire not less than 0.9mm dia complete all as specified and directed. |
| 19 | M&L for TMT bars 5mm dia and over upto and incld. 10mm dia as in stirrups, spacers and binders and binding with MS wire not less than 0.9 mm dia (annealed) conforming to IS:1786, complete all as specified and as directed. |
| 20 | M&L for formwork to sides and soffits of floors or roof beams, lintels cantilevers, shelves including supports etc complete all as specified and as directed |
| 21 | M&L for form work sides and soffits of RCC slab and similar work not exc 200 mm thick complete all as specified and directed. |
| 22 | M&L for machine pressed precast concreteinterlocking paver blocksGlossy finish of any shape &size conferming to IS-15658-2006 of 60mm thickness M-35 grade with grey cement and pigmentof the design & pattern as approved by GE |
| 23 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 24 | M&L for PCC1:4:8 type D2 ,using 40mm graded stone aggregate ,as infoundation, filling and mass concrete, sub base of floorcomplete all as specified and directed |
| 25 | M&L for 100mm thickCement concrete 1:4:8 type D2 using 40 mm graded agg as in sub base complete all as specified and directed. |
| 26 | M&L for 25mm thickcement concrete 1:2:4 type B0 using 12.5 mm graded agg as in floor complete all as specified and directed. |
| 27 | M&L for non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.18 Sqm but not exc 0.36 Sqm , in floors etc set, jointed in neat cement slurry over and including 15 mm thick cement mortar screed (1:4)and pointed including white or colour cement to match complete all as specified and directed. |
| 28 | M&L for non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm , in floors etc set, jointed in neat cement slurry over and including 15 mm thick cement mortar screed (1:4)and pointed including white or colour cement to match complete all as specified and directed. |
| 29 | S&F glazed digitalcoloured ceramictiles450x350x7mm /600x300x7mm thick,set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding 15 mm thick renderingin CM 1:4 as in vertical surfaces complete all as specified and directed. (Make: Kajaria/Somanyt/Johnson) |
| 30 | S&F vetrified tiles dark colourshade 10mm thick (Square/rectangular ) polished ,area of each tilesnot exc 0.36 Sqm in floor etc,set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 31 | M&L hardcore of gauge not exc 63mm, using broken stone or boulders deposited spred and levelled in layers not exc 15 cm thick ,warered and rammed to a true surface complete all as specified and directed. |
| 32 | M&L for screed bed or bedding layer of cement mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed. |
| 33 | M&L for rendering 15mm thick in CM 1:4 on brick work or concrete surface of wall and finished surface even and smooth without using extra cement all as specified and directed. |
| 34 | M&L for rendering 15mm thick in CM 1:6 on brick work or concrete surface of wall and finished surface even and smooth without using extra cement all as specified and directed. |
| 35 | M&L for rendering 10mm thick in CM 1:4 on brick work or concrete surface of ceilingand finished surface even and smooth without using extra cement all as specified and directed. |
| 36 | Providing and fixing powder coatedcoloured (minimum thickness of powder coating 50 micron) aluminium partly glazed and partly paneled door shutterstandered door section of 1.5mm thick (minimum) having size of styles, toprails 83x44mm where as bottom rails made up of 100x44mm including necessary joining cleats glazing clips, rubber packing, anodized aluminium snap beading screws, anodized aluminium fittings such as 100mm long 3 No. aluminium hinges B-21 ,type 01 No. aluminium tower bolt 200mm long and one no mortise lock 100mm size4 levers (vertical type) and 01 No 300mm size long aluminium sliding bolt and 02 No fancey type fiber glass 150mm dia circular handle shall be provided to each door and glazing of top panel shall be made of 5.50 thick sheet glass and pannelling shall be provided with 12mm thick exterior grade pre laiminated partical board with both side choice laminations complete all as specified and directed. |
| 37 | S&F aluminium window and ventilator shutters, powder coated coloured (minimum thickness of powder coating 50 micron) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 38 | S&F anodised aluminium window / ventilator shutters, powder coated coloured (minimum thickness of powder coating 50 micron) fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 39 | S&Faluminium frame powder coated coloured (minimum thickness of powder coating 50 micron) for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 40 | S&F mild steel work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 41 | S&F sheet glass 5.5mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares not exc 0.5 sqm in each pane complete all as specified and directed. |
| 42 | S&F for 3mm thick figured glass pin head typeand glazing with oil putty or wooden beads square area not exc 0.5 sqm in each pane complete all as specified and directed. |
| 43 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 44 | S&F aluminium body door closer hydraulically regulated, designation No.3, universal type,suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. complete all as specified and directed. |
| 45 | S&F 100 x 63 mm single rebated factory made, 100% solid WPC (Wood Polymer Composite) paintable door frame made from 100% lead free (Single Extruded Process) material with density not less than 780 kg/Cum complete all as specified and directed. Make: Rajshree/ M/s TVL Engineers Pvt Ltd. Note : (a)Door frame shall be water proof, termite proof, fire retardant and having excellant screw holding capacity. (b) Rate for this item includes Material and labour for fixing of frame with minimum 06 Nos of hold fasts/Dash through bolts of suitable size. |
| 46 | S&F Factory made 28 mm thick 100% solid WPC (Wood polymer composite) laminated flush door shutter decorative type of required size comprising of virgin PVC resinof K value 57-60 (suspension grade),calcium carbonate and natural fibre (wood powder/rice husk/wheat husk) and non toxic additives,made from extrusion process WPC foam sheetsingle extruded (inner) with having minimum density not less than 650 kg/cum manufactured by Rajshree/TVL Engr. Ltd. ,having good screws holding capacxity (screw withdrawal strength of 2000 N (face)& 1100 N (edge)minimum compissive of50 N/sqmm,and all as per manufacturer instruction, complete all as specified and directed. Make: Rajshree /M/s TVL Engineers Pvt Ltd. Note : (a)Door shutter shall be water proof, termite proof, fire retardant and having excellant screw holding capacity. |
| 47 | S&F aluminium handle 150 mm long complete all as specified and directed. |
| 48 | S&F aluminium barrel tower bolt 150 mm long complete all as specified and directed. |
| 49 | S&F butthinges medium weight cold rolled mild steel 100 mm long complete all as specified and directed. |
| 50 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness, including cover fillets complete all as specified and directed. |
| 51 | S&F 12mm thick plain Gypsum board false ceiling 600mmx600mm with GIframe work including all necessary drilling , cutting to fix electrical items as under:- (a) GI sheet channel 30x25x20mm of 24 Gauge fixed with rawl plug and screws 450mm centre to center alongwith perimeter of walls. (b) GI sheet channel made to shape 50x40x40mm of 24 gauge placed @ 600mm centre to centre from perimeter of wall except long wall (in one span) (c) GI sheet intermediate runners of size 45x10x10mm of 24 gauge fixed @ 1200mm centre to centre leaving frame of one side wall (in other span) (d) GI sheet 25mm wide & 20mm gauge suspenders fixed with steel fasteners to roof, ceiling @ 1200mm centre to centre incl plugging in RCC slab. (e) S&F 12mm thick gypsum boards, filling joints with P.O.P and finishing complete with two coats of plastic emulsion paint over one coat of primer on ceiling. |
| 52 | S&F false ceiling with 4mm thick E-board Everest make white prelaminated set embosed rainforced designer ceiling board of approved texure fixed with GI imposed grid frame work of size not more than 600x600mm having 24mm wide T-section runner made of 0.33mm GI sheet and angle made of 0.45mm, GI sheet suspected with 4mm dia GI wire including two coat of plastic emulsion paint over one coat primer complete all as specified and directed. Note.All exposed surface of grid work shall be powder coated white. |
| 53 | Refixing of ceiling E-board ascomplete all as item No 52 above including replacement of necessary damaged/defectedgridand boards of existing with new one complete all as specified and directed. |
| 54 | Cutting chases, pining in, making good to facing where required and pointing in CM 1:3 for concealed water tubingmaking good, cutting not exc 10cm girth in brick walls complete all as specified and directed. |
| 55 | S&F GI tubing 15mm bore medium grade with all fittings fixed to wall, ceiling or laid in floor including taking down old unservicable pipes complete all as specified and directed. |
| 56 | S&F GI tubing 20mm bore medium grade with all fittings fixed to wall, ceiling or laid in floor including taking down old unservicable pipes complete all as specified and directed. |
| 57 | M&L for preparation of old/new plastered decorated surface of wall and applying two coats of weather proof exterior emulsion paint after filling of interstice of plastered surface with Birla wall care putty complete all as specified and directed. |
| 58 | M&L for complete removal of existing treatment from old plastered surfaces of walland applyingtwo coats of oil bound distemperover a coat ofbirla wall care putty, complete all as specified and directed. |
| 59 | M&L CIfloor trap 75mm with gratingincluding jointing to waste pipe fixed in cement concrete type B1 1:2:4 complete all as specified and directed. |
| 60 | S&F 100mm bore cast iron sand cast, soil waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floors complete all as specified and directed. |
| 61 | S&F 75mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls complete all as specified and directed. |
| 62 | S&F 75mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floors complete all as specified and directed. |
| 63 | S&F Cast iron bends of 100mm dia, diminishing pieces opr tappers complete all as specified and directed. |
| 64 | S&F Cast iron bends of 75 mm dia, diminishing pieces opr tappers complete all as specified and directed. |
| 65 | S&F 100mm cast iron sanitary connections, short connections pipe of length upto 300mm complete all as specified and directed. |
| 66 | M&L for concrete bed to drain pipe 150mm bore including packing under andhannching against the side of pipe using cement concrete 1:3:6 tpe C-2 (40mm graded stone aggregate) complete all as specified and directed. |
| 67 | S&F salt glazed stoneware drain pipe 150mm dia grade "A" laid in trenches and jointed complete all as specified and directed. |
| 68 | Cutting into existingmanholes forconnecting new drains making good topipe and rendering , cutting out existingbenching for andformingbranchchannel in cement concrete 1:2:4 type B1 smooth finished andreformingbenching as required for150mm dia pipe complete all as specified and directed. |
| 69 | S&F 20mm dia gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 15mm bore complete all as specified and directed. |
| 70 | S&F 2000 Ltr capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including dismantling of old unserviceable tank complete as specified in SSR Part-I complete all as specified and directed. |
| 71 | S&F for 500 Ltr capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including dismantling old unserviceable tank complete as specified in SSR Part-I complete all as specified and directed. |
| 72 | S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms) complete all as specified and directed. |
| 73 | S&F vitreous china wash down water closet pan (Pedestal pattern EWC), coloured, wall mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, including vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed. |
| 74 | S&F in repair vitreous China squatting pan of pattern `long pan", size 580mm white with `p" or `S" trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 75 | S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 Ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 76 | S&F glass corner shelf 300mm size with CP bracket fixed to wall complete all as per manufacturer"s instructions complete all as specified and directed. |
| 77 | S&F for fancy type CP single lever basin mixer, without popup waste system with 450mm long branded hose for 15mm bore of pipe complete all as specified and directed. |
| 78 | S&F in repair 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot" or `Cold" with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 79 | S&Fvitreous china table top Wash Hand Basin of size 610 x 475 x 210mm complete all as specified and directed. |
| 80 | S&F in repairs vitreous China wash basin, white, flat back, size 550x400mm including brackets complete all as specified and directed. |
| 81 | S&F fancy type CP towel rack 600mm long with lower hanger fixed to wall complete all as specified and directed. |
| 82 | S&Ffancy type soap dispenser with glass bottle fixed to wall complete all as specified and directed. |
| 83 | S&F fancy type CP bottle trap (with internal partition) of size 32mm dia with 300mm & 190mm long wall connection pipes and wall flange fixed to waste coupling complete all as specified and directed. |
| 84 | S&F 5mm thick bevelled edge mirror of selected quality mounted mounted on 6mm thick AC board with PVC moulded frame and fixed with chromium platedbrass screw and washers etc complete all as specified and directed. |
| 85 | S&F chromoium plated box type toilet paper holder fancycomplete all as specified and directed. |
| 86 | S&F soap dish of fancy type complete all as specified and directed. |
| 87 | S&F glass self assembly consisting of 5.5 mm thick glass sheet glass self 12 Cm wide with CP bracket gaurd and railing 60 Cm long complete all as specified and directed. |
| 88 | S&F in repairs bib tap 15mm dia long body,chromium plated, fancy type all complete all as specified and directed. |
| 89 | S&F brass CP tubular towel rail of superior quality 20mm dia 60cm long between flanges fancy type complete all as specified and directed. |
| 90 | S&F towel ring 200mm dia superior quality fixed as in repair complete all as specified and directed. Make jaquar or an equivalent |
| 91 | S&F PVC connection of 15mm bore, 600mm long with brass coupling on both ends of superior quality complete all as specified and directed. |
| 92 | S&F in repair CP angle valve for 15 mm bore pipe with capstan head long screwed shank including CP cover plate fancy type complete all as specified and directed. |
| 93 | M&L for 20 mm thick Granite (of any type) work(table rubbed and polished) in steps jambs, pillars, window-cills cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 94 | M&L for machine cut kota stone slab flooring 20-22mm thick over and including 20mm cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 95 | M&L for machine cut kota stone slab skirting 20-22mm thick over and including 15mm rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 96 | S&F for stainless steel curtain rod coloured/white , standrad quality 25mm dia with heads at both ends and middle support, rings etc.complete all as specified and directed. |
| 97 | S&F health faucet for EWC CP hand hold with flexible pipe complete all as specified and directed. |
| 98 | S&F 15mm dia CP two way tap consisting angle valve to control water suitable for jet cleaner complete all as specified and directed. |
| 99 | Dismantling plain or corrugated AC sheeting, any gauge, thickness, including Nanital or similar pattern roof covering complete all as specified and directed. |
| 100 | S&F coloured pre-paintedGALVALUMEaluminium zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strngth of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screwsincluding necessary washers etc all as per manufactures instruction complete all as specified and directed. |
| 101 | S&F coloured pre-paintedGALVALUMEaluminium zinc coating GI based plain steel sheet 0.50mm thick having tensile strngth of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screwsincluding necessary washers etc all as per manufactures instruction complete all as specified and directed. |
| 102 | Excavation in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling, in andramming earthor broken rubble mixed with earth arouond in layers not exc 25cm, watering and removing surplus soil to distance not exc 50 m and making good surface in soft/loose soil complete all as specified and directed. |
| 103 | M&L for PCC 1:3:6 type C-2(40mm graded aggregate)as in posts etc complete all as specified and directed. |
| 104 | S&F mild steel section such as tubular post, rafter, purlins including special shaped washer etc. compete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade ST-240 complete all as specified and directed. |
| 105 | M&L for 18/19mm thick prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 106 | M&L for second class hard wood plain fillets, square, rectangular or triangular in section,wrought, secured with nails or brads, sectional area not exc 3 sqcm complete all as specified and directed. |
| 107 | S&F second class hard wood timber scantling, clean sawn, fixed in timber framed work including dismantling of old timber work complete all as specified and directed. |
| 108 | M&L for preparation of new plastered surfaces of ceilingand applyingthreecoats of white wash, complete all as specified and directed. |
| 109 | M&L for applying two coat of cement base paint to walls including preparation of surfaces complete all as specified and directed. |
| 110 | Preparing surface of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote complete all as specified and directed. |
| 111 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and apply two coats synthetic enamel paint over acoat of red oxide primer complete all as specified and directed. |
| 112 | S&F 100mm hasp and staple, safety type, aluminium anodised with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 113 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel,brass polished bright finished complete all as specified and directed. |
| 114 | S&F continuous (piano) hinges, width of flange 40mm, mild steel, bright finish or electro galvanised complete all as specified and directed. |
| 115 | M&L forPCC 1:2:4 typeB1 using 20mm graded stone aggregate asin roof kerbs or mud stops, rounded or chamfered on edges, PCC coping etc including necessary formwork complete all as specified and directed. |
| 116 | M&L for 75 mm thickPCC 1:3:6 type C2 using 40mm graded stone aggregate asin flooring & plinth protection etc complete all as specified and directed. |
| 117 | M&L for Bees-wax polishing on surfaces previously polished, width or girth including cleaning and preparing the surfaces complete all as specified and directed. |
| 118 | S&F exterior tilesof superior qulaity 300mmx300mm x 10-12mm thickof approved size/design/shade set & jointed in neat cementslurry & pointed in white orcoloured cementto match as in floor over andincluding20mmthickscreed bedinCM 1:4 , complete all as specified and directed. |
| 119 | S&F solidPVC wall lining, consisiting of 5mm thick panel with wood grain printed PVC sheetinclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and directed |
| 120 | S&F 5mm thick PVC sheet fillets of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed. |
| 121 | Removing building materials / wastage material retrieved from demolition distance of not exc 1.00 KM incl loading, unloading and stacking at the destination,complete all as specifdied and directed |
| 122 | S&F in repair110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/laid in floor complete all as specified and directed. |
| 123 | S&F in repair110mm bore PVC (SWR) bends/shoes complete all as specified and directed. |
| 124 | Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) completeincluding all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified & directed. |
| 125 | M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathedmulti stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathedmulti stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and including concealed PVC Conduit medium grade, ISI marked not less than 19.5 mm / 20 mm diaalong with conduit fixing accessories and with pressed steel terminal box for mounting of modular inner plates of thickness 1.6 mm with outer modular plates upto 12 modules for provision of modular switches/regulator complete all as specified & directed. NOTE:- After rewiring cutting chasing portion should be matched with existing finishes of walls. |
| 126 | All as per item No 125 above but 5 Amp socket outlet, independent. |
| 127 | All as per item No 125 above but on the same board. |
| 128 | All as per item No 125 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 2.5 sq mm connected to common earth dolly. |
| 129 | S&F for socket outlet multipurpose 2-in-1, 5 pin 6 Amps, 230 Volts modular type complete all as specified and as directed. |
| 130 | S&F for socket outlet multipurpose 2-in-1, 6 pin 6 /16 Amps, 230 Volts modular type complete all as specified and as directed. |
| 131 | S&F for modular switch 1 way 6 amps 230 volts single pole one way complete all as specified and directed. |
| 132 | S&F for modular switch 1 way 16 amps 230 volts single pole one way complete all as specified and directed. |
| 133 | S&F in repair inner plate & white cover plate with frame, 2 modules complete all as specified and directed. |
| 134 | S&F in repair inner plate & white cover plate with frame, 3 modules complete all as specified and directed. |
| 135 | S&F in repair inner plate & white cover plate with frame, 4 modules complete all as specified and directed. |
| 136 | S&F in repair inner plate & white cover plate with frame, 6 modules complete all as specified and directed. |
| 137 | S&F in repair inner plate & white cover plate with frame, 8 modules complete all as specified and directed. |
| 138 | S&F in Replacement ceiling rose two or three terminals surfaces bakelite 65 x 50mm size complete all as specified and directed. |
| 139 | M&L for one light/fan/exhaust fan/holderpoint wiring controlled by one switch with PVC insulated unsheathedmulti stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathedmulti stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and including concealed PVC Conduit medium grade, ISI marked not less than 19.5 mm / 20 mm dia along with conduit fixing accessories and with pressed steel terminal box thickness 1.6 mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheetfor provision of switches/regulators complete all as specified and directed.NOTE:-After rewiring cutting chasing portion should be matched with existing finishes of walls. |
| 140 | All as per item No 139 above but 5 Amp socket outlet, independent. |
| 141 | All as per item No 139 above but on the same board. |
| 142 | All as per item No 139 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly. |
| 143 | S&Fswitch piano flush type 5 Amp one way single pole, 240 volts complete all as specified and as directed. |
| 144 | S&F socket outlet 5 Amp 5 Pin 240 volt flush type complete all as specified and as directed. |
| 145 | S&F switch socket outlet two in one 5& 15 Amp 6 pin multipurpose combination complete all as specified and as directed. |
| 146 | S&F ceiling fan regulator for 1200mm/1400mm sweep electronic rotary step type 120/280 volts complete all as specified and as directed. |
| 147 | S&F lamp holder with back plate suitable for batten fittings (white colour) complete all as specified and as directed. |
| 148 | S&F in repair wall mounted fancy light fitting brass made (double light) bracket with 220mm x 86mm decorative rectangular base, two 210mm lengthy "U" shaped brass arms brass Dull black powder coated ; sutable for 4 to 9W LED Lamp complete all as specified. Make:- Mepro Cat No- MBBD 901 or equivalent in Philips/Havells/Bajaj as approved by GE. |
| 149 | S&F in replacement/ repair ofwall mounting fan of size 400 mm sweep, AC single phase 230V, 50Hz including wall brackts complete all as specified & directed. Make-Havells/Cromton/Usha. |
| 150 | S&F sub main wiring in existing conduit for main DBs to Sub DBswith PVC insulated & unshaethed two runs of 10 sqmm single core multistrand copper conductor cable, 1100 Volts grade alongwith one run of 10 sqmm PVC insulated & unshaethed copper conductor cable, 1100 Volts grade, connected to common earth dolly as earth continuity conductor, . Note : (a) threeruns of 10 sqmm cable shall be constitute one unit. Make of cable: Havells/ polycab/RR Cable |
| 151 | S&F 2"X2"36 Watt LED Ceiling Light Fitting exquisitely designed luminaire which is bound to deliver extra lumen thruogh its ;pure form and glare-less light Recessed full openwith required electrical connection with suitable wire (120 lumen /watt) Make and modle of CG cat pat No-LCTLRP-36-FO-CDL or equivalent in Havells /Bajaj Philips as approved by GE. |
| 152 | S&F in repair LED Building securitylight 36WIP 65 including one number MS clamps made of 25x3 mm flat iron with bracket of GI pipe light grade 25 mm dia and length not less than 1.2 mtr end of GI pipe suitable for street light fitting, connecting with three core copper flexible wire 23/0.0076 complete.Make-Philips/CG/Bajaj. |
| 153 | S&F LED Mirror light fitting 15 watt(2") with extruded aluminium housing and robust construction complete with inbuilt driver.Make: Havells Cat No-LHDT15113631 or equivalent in CG Cat No-LCL-14-CDL/Philips cat No-BN150W LED13S-6500 PSE OD GR |
| 154 | S&F in replacement exhaust fans AC single phase 230/ 240 V of size 300 mm sweep pvc body with louver with complete making a hole including civil work neccassary connection with the required wire complete all as specified and directed.Make-Havells/Cromton/Usha. |
| 155 | S&F in repair MCB DB TPN (double door) 4 Ways, 415 Volts including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wal lcomplete all as specified and directed. Make- Legrand /Havells/ABB |
| 156 | S&F in replacement isolator four pole 415 volts, 100 Amps, curve "C" of breaking capacity 10KA complete all as specified and as directed. |
| 157 | S&F in replacement of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed. Make : Crompton, Cat No : IGP131LT8-16& LT8-20-865-2 or equivalent in Havells, Cat No : REGALBATTENT8UPT01X22WSSBS & PHOTONULTRA1213T8SSTL20WLED865SPC,philips cat no TMC 100 1xT LED /MAS LED tube 1200 mm 18 w 865T8 I - 2100 Lumen |
| 158 | S&F in repair MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed. Make- Legrand /Havells/ABB |
| 159 | S&F single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed. |
| 160 | S&F in replacement MCB, single pole, 240 Volts, curve "C" of capacity (6-32 Amps) as ordered breaking capacity 10 KA complete all as specified and as directed. |
| 161 | S&F in repair MCB SPN, 40 to 63 Amps, 240 Volts, curve "C" ofbreaking capacity 10KA complete all as specified and as directed. |
| 162 | M&L for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed. |
| 163 | S&F of stationery storage type electric BEE 5 star rated Hot Water Geyser of capacity 25 Ltr to operate on 230 volt AC,vertical type, white in colour, working pressure min 0.8 Mpa with glass lined coated tank, magnesium anode, adjustable thermostat, enamel coated incology heating element 2 KW, ABS plastic body,Product warranty-2 Years, Heating element warranty-4 Years, Inner Tank warranty-7 Years, including 4 nos full threaded fastner of size 100 x 10 mm with 2 Nos washer,complete all as specified and directed. Make: Racold/Jaquar/Havells/Bajaj/Crompton |
| 164 | S&F in replacement ceilingfan complete with electronic type regulator and accessories 230 V,1200 mm sweep BEE 5 star rated including all electrical connection with required wire complete all as specified and directed |
| 165 | M&L for renewal of earthing complete with galvanised steel earth plate electrod 60cmx60cmx6mm thick burried directly in ground ( earth ) pit not less than 2.25mtr below normal ground ( level ) connected to and including using galvanised iron strip 25×4mm as earthing lead by means of bolts nuts check nuts and washers of galvanaised iron or steel including PCC pit in 1:2;4 type B-1 RCC cover with suitable handle and angle iron 40x40x5mm frame, excavation and earth work in any type of soil, medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade protetion pipe 15mm bore upto main board complete as shown on electrical plate No 5 of MES Sch 1991 ( part-I) and testing and complete all as specified and directed. |
| 166 | S&F energy saving ceiling fan of 1200 mm sweep of 330-370 RPM, 220-240 volts, AC, 50 Hz, ISI marked with five star rating including hanging with the help of fan hook, down rod up to 04 feet and connecting up with provn of 3 core copper flexible cable of size 1.5 sqmm from ceiling rose to fan complete all as specified and directed.Make : Havells, Model: ES-50 Premium or Usha, Model: Energia Star ISI or Crompton Greaves, Model: Empower 50 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
