Public Works Department-PWD has published Renovation Of The Office Of The Sub-Divisional Police Officer, Phq Silvassa.. Submission Date for this Tender is 31-01-2022. Building Repair Tenders in Dadra And Nagar Haveli Dadra And Nagar Haveli. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Providing materialand labour forPainting on wall surface with approved brand & manufacture, Asian Royal or VELVET touchpaint (three coats) on new/old wall surface to give an even shade over & including two coats of Birla putty finishing smooth, sand papering including Asian brand wall primer coat including scrapping of old paint from surfaces, cleaning, preparing the surface even & sand papering to make the surface smooth as directed by Engineer- in- charge. |
2 | Providing material and labour forPainting two coats (excluding priming coat) on previously paintedwoodand wood basedsurface withenamel paint, to give an even shade including cleaning the of all dirt, dust and other foreign matter. |
3 | Providing material and labour for 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for DARKshade |
4 | Providing and laying24" x 24" vitrified and/or Marbo Grenitetiles8 to 10 mm thick , in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with with color cement slurry including finised with flush pointing & cleaning the surface, etc complete work as directed by engineer-incharge. (Make: Johnson, Kajaria, Somany, Euro, RAK, Nitco, Asian)* |
5 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
6 | Providing and fixing Powder Coated (Min 50 Microns Thickness) aluminium work for WINDOWS AND VENTILATORS with heavy duty extruded built up standard tubular sections/appropriate Z sections andother sections of approved make conforming to IS: 733 and IS : 1285,fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasts including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt or sealent of wecker 789 or Dow corning 789 grade so as to make all joints waterproof of approved color etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, auminium snap beading for glazing / panelling, stainless steel screws as per architectural drawings and the directions of Engineer-in- charge Including providing and fixing glazing in aluminium WINDOWAND VENTILATOR shutters etc. withEDPM gasketetc. complete as per the architectural drawings and thedirections of engineer-in-charge with Color Tinted glass sheet of nominal thickness 4.0 mm of approved shade andapproved make and fixed to the frames and frames fixed to the walls. The framed ends shall have required brushings for proper sealing.The Window shall be Three Track withslidingshutters with window frame with bottom member of size 92 x 31.75 x 1.10 weighing 0.911 Kg./Rmt. top and sides member ofsize 92 x 31.75 x 1.05 weighting0.759 Kg./Rmt. With shutter frame of top member of size 40 x 18 x 0.91 weighing 0.325 kg / Rmt and bottom member of size 52 x 18 x 0.91 weighing 0.390 kg / Rmt,interlock member of size 40 x 18 x 1.00 weighing 0.440 kg / Rmt ,and handle member of size 40 x 18 x 0.91 weighing 0..325 kg / Rmt of extruded alluminiumsection and frames with necessary fixtures & Fasteners like Heavy Roller Bearings, Touch Locks etc. complete including necessary cutting and making good etc. complete. 2 Glass Shutters complete + 1 Stainless Steel Mosquito Net Shutter with Aluminium Anodised U Channel Beading complete. |
7 | Providing material and labour for fixing vertical blinds including all accessories as per direction of Engineer-in-charge. |
8 | Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand)(A) vitreous China Pattern :(i) in white colour and Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers. White plastic seal and cover. Providing and fixing 12.5 Litres low level flushing cistern with a pair, ofC.I.or Mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet Vitreous China (I) In white colour |
9 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
10 | Providing and Fixing Jet Spray Heavy Duty with S.S. Braised Hose 60cm Long Standard Design (Make Jaquar, Kohler, Roca, and/or as approved by Engineer-incharge Jet Spray Nozzle)conforming to IS:Standards complete with Jet Spray Nozzle With PVC Tube, Fixing Nut & Jet Flange, etc complete as directed by engineer-incharge. |
11 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter |
12 | Providing and fixing C.P. brass Bib Cock With Wall Flange (Make Jaquar, Kohler, Roca, and/or as approved by Engineer-incharge Bib Cock with Wall Flange) of approved quality conforming to IS:8931 : 15 mm nominal bore |
13 | Providing material and laour forfixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v400mm size. (i) In white colour.& Providing and fixing C.P. brass waste for washbasin or sink. (B)40mm dia.& Providing and fixing M.I. fisher union for washbasin or sink. (B) 40mm dia. |
14 | Providing material and labour for fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers. |
15 | Providing Material, Labour and equipments for Providing and fixing CP Brass towel rail complete with brackets with CP brass screws with concealed fittings arrangement of approved quality and colour. (Make Jaquar, Kohler, Roca, and/or as approved by Engineer-incharge Single Towel Rail 450mm Longetc) complete as directed by engineer-incharge. |
16 | Providing Material, Labour and equipments for Providing and fixing soap container 325 mm wide,75 mm distance from wall of standard shape with fittings of approved quality and colour, (Make Jaquar, Kohler, Roca, and/or as approved by Engineer-incharge Soap Dish Holder) , etc complete as directed by engineer-incharge. |
17 | Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistancewith diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt, LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates) (D) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete. (f) upto 36 watt, 600 x 600 mm, surge - 4 KV |
18 | Supplying of One Nos SP 16 A Switch & one no6/ 16 A Universal Socket combined with indicator & fuse |
19 | Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erectedwith necessary connection. As desired by Engineer In charge (1)One No. SP 6 Amp. Cat.I |
20 | Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erectedwith necessary connection. As desired by Engineer In charge (2) One No 5 pin plugCat.I |
21 | Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erectedwith necessary connection. As desired by Engineer In charge (5) Electronic hum Free four or more steps EME Fan regulator |
22 | Providing material and labour for repairing of sofa (three seater) including rexin cloth as per direction of Engineer-in-charge. |
23 | Providing and erecting Godrej furniture. WISH Work Station - 1 seater, Providing and placing WISH panel & tile based modular workstation, with partition thickness Spine - 52.4 mm and Fin - 23 mm. Panel Height-1200 mm including powder coated aluminium trims. Tiles - Combination of top tiles are fabric magneitc tile & white board. Bottom tiles - Plain metal. Intermediate blocks are given in DL finsh. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500W1 x 1500W2 x 600D mm. Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring. Nova metal free standing pedestal of size 390W x 435D x 646H. Metal KBPT in Satin Ral white colour. CPU Trolley - std black colour. as directed by Erngineer in charge. |
24 | Providing and placing godrej display unit flocker 1800w x 450d x 1870h. "DURA" ble wood: The solid wood that we use is our furniture range is inherently strond and hence durable "ADEQUATEELY SEASONED". Ourdura wood is treated adequated before being used to make furniture, making it resistant to termited and seasonal changes. NATURAL APPEAL: The rustic charm of the fascinating patterns of grains and fibers immediately adds warmth to surroundings and blendsthe house with nature. EASY MAINTENANCE: Dura woork does not demand heavt maintenance apart from the regular dusting and occasional polishing to make it look brand new. VARIETY: Range of natural dura wood available in different types, colors, tones and textures. VERSATILITY: Dura wood fits well into all home aesthetics. |
25 | Providing and erecting wooden carved screen partition of size 80" x 72" height made of mango wood & mdf as directed and selected by Engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail