Public Works Department-PWD has published Construction Of Govt. Senior Secondary School Kheel At Karsog Distt. Mandi ( Hp ) ( Shc / O Building Portion , W.S. And S.I., Rain Water Harvesting Tank System, Septic Tank And Soak Pit ) . Submission Date for this Tender is 29-01-2022. Water Harvesting Tenders in karsog Himachal Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains [not exceeding 1.5m (one point five Metre)in width or 10 sqm (Ten Square Metre) on plan], including dressing of sides and ramming of bottoms, lift upto 1.5 m, (one point five Metre) including getting out the excavated soil and disposal of surplus excavated soils as directed, within any lead ordinary rock as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (one Cement : four coarse sand) : eight graded stone aggregate 40 mm (forty Millimetre) nominal size as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
4 | Providing and laying in position cement concrete 1:5:10 (one cement : five coarse sand): ten graded stone aggregate 40 mm (forty Millimetre) nominal size of specified grade excluding the cost of centering and shuttering as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
5 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (one cement : two coarse sand): four graded stone aggregate 12.5mm(twleve point five Millimetre) nominal size as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
6 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 (ten) of approved quality using 1.7kg (one point seven kilogram) Per Square Metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
7 | Making plinth protection 50mm thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm (twenty millimter) nominal size over 75mm (seventy five Millimetre) thick bed of dry brick ballast 40 mm (forty Millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling & dressing & finishing the top smooth as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
8 | Constructing Course rubble hammer dressed "U" shape open surface drain with side wall. 15x22 cm (fifteen into twenty two Centimetre)in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (one Cement: three Sand) including earth work and laying 10 cm (ten Centimetre)cement concrete in 1:5:10 (One Cement : Five Sand : Ten graded stone aggregate) of 40 mm (fourty Millimetre) nominal size and 7.5 cm (seven point five Centimetre) cement concrete 1:2:4 (one Cement : two Sand : four Graded stone aggregate of 20 mm (twenty Millimetre) nominal size and finished with a floating coat of neat cement complete as per standard design as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
9 | Reinforced cement concrete work in walls (any thickness),1:1.5:3 (one cement : one point five coarse sand) : three graded stone aggregate 20 mm (twenty Millimetre) nominal size)including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° (fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor alllevel, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (one cement : one point five coarse sand) : three graded stone aggregate 20 mm (twenty Millimetre) nominal size)as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
11 | Centering and shuttering including strutting, propping etc. and removal of form as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. for : |
12 | Foundations, footings, bases of columns, etc. for mass concrete |
13 | Suspended floors, roofs, landings, balconies and access platform |
14 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
15 | Columns, Pillars, Piers, Abutments, Posts and Struts |
16 | Stairs, (excluding landings) except spiralstaircases |
17 | Edges of slabs and breaks in floors and walls any width |
18 | Wall (any thickness) including attached pillaster, butteresses, plinth and strings course etc. |
19 | Providing, hoisting and fixing above plinth level up to floor alllevel precast reinforced cement concrete in mouldings as in cornices, windows sills etc, including setting in cement mortar 1:3 (one cement : three coarse sand) cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 (one cement : one point five coarse sand) : three graded stone aggregate 20 mm (twenty Millimetre) nominal size as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
20 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete including the cost of binding area upto plinth level and floor all level. Thermo-Mechanically Treated bars of gradeFe-500D or more as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
21 | Providing and laying in position machine batched and machine mixed design mix M-25 (twenty five) grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durabilityall works upto any level as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. (Note :- Cement content considered in this item is @ 330 kg/cum. (three hundred thirty Kilogram per Cubic Metre) Excess/ less cement used as per design mix is payable/recoverable separately). |
22 | All works upto Plinth Level |
23 | All works above plinth level upto Floor all level. |
24 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) iin superstructure above plinth level up to floor all level in all shapes and sizes in cement mortar 1:6 (one cement : six course sand) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
25 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to floor all level. Cement mortar 1:3 (one cement : three coarse sand)as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
26 | Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement : six sand : twelve graded stone aggregate 20mm (twenty Millimetre) nominal size at plinth level. In Cement mortar 1:6 (one cement : six coarse sand) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
27 | Providing and laying factory made Precast concrete solid blocks of 200 mm (two hundred millimetre) thickness of grade M10 (ten)made of C&D waste from approved manufacturer in superstructure above plinth level upto floor all level Cement mortar 1:6 (one cement : six coarse sand) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
28 | Providing and laying half block masonry with factory made Precast concrete solid blocks of 100 mm (one hundred millimetre) thickness of grade M10 (ten) made of C&D waste from approved manufacturerin superstructure above plinth level upto floor all level Cement mortar 1:4 (one cement : four coarse sand) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
29 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). First class Deodar wood as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
30 | Providing and fixing 12mm (twelve millimetre) thick green chalk board (non-magnetic) with superior quality framing specially anodized aluminium profile 20x15mm (twenty int fifteen Millimetre) with coners of specified plastic shall be provided. The board surfacr shall be non-porous ceramic particles on the top screen surface for smooth writting with chalk over 11mm (eleven millimetre) thick particle board which shall have basing material of galvanized steel 28mm (twenty eight Millimeter) thick. The board shall be fixed on the wall with specially designed "J" clamps and square clamps with the help of nylon sleeves and screws as per site requirement completeas per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
31 | Providing and fixing 18 mm (eighteen Millimetre) thick gang saw cut,mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills,facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty Millimetre) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment,epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc .complete at all levels: Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble :Area of slab over 0.50 sqm (zero point five zero square Metre) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
32 | Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete :12 mm (twelve Millimetre)thick as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
33 | Providing and fixing specified wood frame work consisting of battensof 4cmx4cm (four Centimetre into four Centimetre) sizefixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete :Kiln seasoned and chemically treatedhollock wood as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
34 | Providing and fixing specified wood frame work consisting of battens 7.5 cm x 6.25 cm (seven point five Centimetre into six point two five Centimetre) fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete: Kiln seasoned and chemically treated hollock wood as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
35 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately):Second Class Deodar wood, 35mm (thirty five Milimetre)thick shutters as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
36 | Providing and fixing ISI marked decorativeflush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm (thirty five Millimetre) thick including ISI marked StainlessSteel butt hinges with necessary screws as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
37 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.: 35 mm (thirty five Millimetre) thick including ISI marked StainlessSteel butt hinges with necessary screws With inside lining of PGI sheet as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
38 | Extra for providing lipping with 2nd (second) class teak woodbattens 25 mm (twenty five Millimetre) minimum depth on all edges of flush door shutters (over all area of door shutter to be measured) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
39 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm (one point four Millimetre) in both directions with wire of dia 0.63 mm, (zero point six three) for doors, windows and clerestory windows with hinges and necessary screws :35 mm (thirty five Millimetre) thick 2nd (second) class deodar shutters with ISI marked M.S. pressed butt hinges bright finished of required size as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
40 | Providing and fixing double glazed hermetically sealed glazing in wooden windows, ventilators and partition etc. with 6 mm (six millimetre) thick clear float glass both side, having 12 mm (twelve millimetre) air gap complete as per specifications drawing carriage of materials within all leads, lifts and other incidentals. |
41 | Providing and fixing 18 mm (eighteen Millimetre) thick, 150 mm (one hudred fifty Millimetre) wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm coir veneer board, nickle plated M.S. Pipe 20 mm (twenty Millimetre) dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm (twenty five into three Millimetre) M.S. Flat 10 cm (ten Centimetre) long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm (one hundred Millimetre into forty Millimetre into forty Millimetre) on both inner side of pelmet and rawl plugs 75 mm (seventy five Millimetre) long etc. all complete as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
42 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etcas per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
43 | Providing 40mmx5 mm (forty Millimetre into five Millimetre) flat iron hold fast 40 cm (forty centimter) long including fixing to frame with 10 mm (ten millimter) diametre bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (thirty into ten into fifteen Centimetre) 1:3:6 mix (one cement : threecoarse sand : six graded stone aggregate 20mm (twnety Millimetre) nominal size as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
44 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16mm (two hundered fifty into sixteen Millimetre) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
45 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals in:- |
46 | 200x10mm (two hundred into ten Millimetre) size. |
47 | 150 X 10 mm (one hunded fifty into ten millimter) size. |
48 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. completeas per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals in |
49 | 125 mm (one hundred twenty five Millimetre) size |
50 | 100 mm (one hunded Millimetre) size. |
51 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. single rubber stopper Complete as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
52 | Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc.completeas per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
53 | Providing and fixing cup board shutters 25 mm (twenty five Millimetre)thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm (twenty five Millimetre) wide x12 mm (twelve Millimetre) thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
54 | Providing and fixing cup board shutters with 19 mm (ninteen Millimetre) thick water proof commercial board ISmarked, with 6mm thick hard wood edging(paintable) withinside lining of P.G.I. sheet with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
55 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
56 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings framed guard bars,ladders, railling, brackets and similar works as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
57 | Providing and fixingrailing for ramp or stair cases with ballusters of 20mmx20mm (twenty Millimetre into twenty Millimetre)square pipe with required interval and 40x5mm (forty into five Millimetre) M.S. Flat, horrizontalin the top and middle of ballusters including painting of the sameas per site requirement complete and as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
58 | Providing and fixing 62.5 mm x 50 mm (sixty two into five into fifty Millimetre) hand rails in 1st (first) class Indian teak wood straight length completeas per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
59 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm (thirty five into thirty five into five Millimetre), joints mitred and welded by angle iron 35x35x5 mm(thirty five into thirty five into five Millimetre) or 35x 5 mm (thirty five into five Millimetre)flat pieces to the existing Tiron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
60 | Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.: 40 mm (forty Millimetre) thick with 20 mm (twenty Millimetre) nominal size stone aggregate as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
61 | Providing and laying local stone over plinth protection laid over and jointed with grey cement slurrycomplete with base of cement mortar 1 : 4 (onecement : four coarse sand).: average thickness 20mm (twenty Millimetre) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
62 | Kota stone slab flooring over 20 mm (twenty Millimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
63 | Kota stone slabs 20 mm (twenty Millimetre) thick in risers of steps, skirting, dado and pillars laid on 12 mm (twelve Millimetre) (average) thick cement mortar 1:3 (one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
64 | Boulder filling under floors tightly hand packed as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
65 | 40 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with :Second class teak wooden planks of size4cm x 20cm (four Centimetre into twenty Centimetre) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
66 | Providing and fixing Ist qualityGRC/ Unistone wall cladding conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm (twelve Millimetre) thick bed of cement mortar 1:3 (one cement : three coarse sand) and jointing with grey cement slurry @ 3.3kg/sqm (three point three Kilogram Per Square Metre), including pointing in white cement mixed with pigment of matching shade complete as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
67 | Providing and laying smooth finish Ceramic glazed floor tiles of size 300x300 mm (three hundred into three hundred Millimetre) (thickness to be specified by the manufacturer) of 1st (first) quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty Millimetre) thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm (three point three Kilogram Per Square Metre including pointing the joints with white cement and matching pigment etc., complete as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
68 | Providing and fixing 1st (First) quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (twelve Millimetre) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg/sqm (three point three Kilogram per Sqare Metre) including pointing in white cement mixed with pigment of matching shade complete as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
69 | Providing and laying Full Body vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty Millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three Kilogram Per Square Metre) including grouting the joints with white cement and matching pigments etc., complete:Size of Tile 600x600 mm (six hundred into six hundered Millimetre) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
70 | Providing and laying Full Body Vitrified tiles in different sizes (thickness to be specified by manufacturer), with waterabsorption less than 0.08 % (zero point zero eight percent) and conforming to I.S.15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (twelve Millimetre) thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three Kilogram Per Square Metre) including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 mm (Six hundred into six hundred Millimetre) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
71 | Providing and fixing Decorative first class kiln seasoned teak wood beading out of 25x12mm (twenty five into twelve Millimetre) section with wood screws in ceiling and linning/panelling including mitring at junctions andto be polished within all leads and lifts and carriagae of material complete as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
72 | Providing and fixing Decorative 1st ( first )class kiln seasoned teak wood cornice out of 75x60mm (seventy five into sixty Millimetre) section with wood screws in ceiling and linning/panellingincluding mitring at junctions andto be polished within all leads and lifts and carriagae of material complete as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
73 | Providing and fixing 15 cm. (fifteen Centimetre) wide 45 cm. (forty five Centimetre) overall semicircular plain G.I. Sheet gutter with iron brackets 40x3mm (forty into three Millimetre) size bolts and nuts and washers etc. Including making necessary conections with rain water pipe complete as per design 0.63mm (zero point six three Millimetre) thick sheetwith zinc coating not less than 275 gm/m² (two hundred seventy five gram per square meter) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
74 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm (ten Millimetre) gap for thermal expansion, (i) Single socketed pipes.110 mm (one hundred ten Millimetre) diametre as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
75 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm(ten millimetre) gap for thermal expansioncomplete as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals in:- |
76 | Coupler :110mm (one hundred ten Millimetre) |
77 | Bend 87.5° (eighty seven point five degree): 110 mm (one hundred ten Millimetre) |
78 | 110 mm (one hundred ten Millimetre) Shoe plain |
79 | Providing and fixing unplasticised -PVC pipe clips of design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (fifty into fifty into fifty Millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement: four coarse sand) and making good the wall etc. complete. 110mm (one hundred ten Millimetre) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
80 | Providing and Fixing 15 mm (fifteen Millimetre) thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm (five hundred ninety five Millimetre) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections galvanising @ 120 grams (one hundred twenty grams) per sqm including both side consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm (twenty four into thirty eight Millimetre) made from 0.33 mm (zero point thirty three Millimetre) thick (minimum) sheet, spaced 1200 mm (one thosuand two hundred Millimetre) centre to centre, and cross “T” of size 24x28 mm (twenty four into twenty eight Millimetre) made out of 0.33 mm (zero point three three Millimetre) (Minimum) sheet, 1200 mm(one thsoaund two hundred Millimetre) long spaced between main’T’ at 600 mm(six hundred Millimetre) centre to centre to form a grid of 1200x600 mm (one thsoaund two hundred into six hundred Millimetre) and secondary cross ‘T’ of length 600 mm (six hundred Millimetre) and size 24 x28 mm (twenty four into twenty eight Millimetre) made of 0.33 mm (zero point thirty three Millimetre) thick (Minimum) sheet to be interlocked at middle of the 1200x 600 mm (one thousand two hundred into six hundred Millimetre) panel to from grid of size 600x600 mm (six hundred into six hundred Millimetre), resting on periphery walls /partitions on a PeriMetre wall angle precoated steel of size 24x24X3000 mm (twenty four into twenty four into three thsoaund Millimetre) made of 0.40 mm (zero point four zero Millimetre) thick (minimum) sheet with the help of rawl plugs at 450 mm (four hundred fifty Millimetre) centre to centre with 25 mm (twenty five Millimetre) long dry wall screws @ 230 mm (two hundred thirty Millimetre) interval and laying 15 mm (fifteen Millimetre) thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm (twenty five into thirty five into one point six Millimetre) fixed to ceiling with 12.5 mm (twelve point five Millimetre) dia and 50mm (fifty Millimetre) long dash fasteners, 4 mm (four Millimetre) G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm (eighty five into thirty into zero point eight Millimetre), spaced at 1200 mm (one thousand two hundred Millimetre) centre to centre along main ‘T’, bottom exposed with 24 mm (twenty four Millimetre) of all Tsections shall be prepainted with polyster baked paint, for all heights. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm (zero point three zero Square Metre) The calcium silicate ceiling tile shall have NRC value of 0.50 (zero point five zero) (Minimum), light reflection > 85% (eighty five percent), non- combustible as per B.S. 476 (four hundrd seventy six) part IV, 100% (one hundred percent) humidity resistance and also having thermal conductivity <0.043 (zero point zero four three) w/ mK as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
81 | 15mm (fifteen Milimetre) cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering up to all floor level includingarises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm(eighty Milimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement:six sand)as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. |
82 | Providing andlaying 15mm (fifteen Milimetre) cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering up to all floor level includingarises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm(eighty Milimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement:six sand)as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
83 | 6 mm (six millimetre) cement plaster of mix :1:3 (one cement : three fine sand) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
84 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shadeNew work (two or more coats) over and including water thinnable priming coat with cement primer as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
85 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm (zero point nine zero litre per ten Square Metre) over an under coat of primer applied @0.75 ltr/10 sqm (zero point seven five litre Per Square Metre) of approved brand and manufacture as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
86 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm(zero point nine zero litre per ten Square Metre) over an under coat of primer applied @ 0.80 ltr/10 sqm(zero point eight zero litre per ten Square Metre) of approved brand and manufacture as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
87 | Finishing walls with 100% (one hundred percent) Premium acrylic emulsion paint having VOC less than 50 gm/litre (fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
88 | Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
89 | 2 mm (two Millimetre) thick pvc/rubber tiles flooring plain, coloured. corbed or mosaic or mattled finish, laid with approved adhesive on sub floor dampproofing treetment(to be measured separately)for payment as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
90 | Providing and applying white cement based putty of average thickness 1 mm (one Millimetre), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
91 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre (fifty grams per litre) of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour single coats as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
92 | Providing and fixing 0.60 mm (zero point six zero Millimetre) thick plain prepainted steel sheetroofing, with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm dia Metre with prepainted limpet and rubber washers complete with all accesoriees as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals.. |
93 | Providing and fixing ridges or hips 60 cm (Sixty Centimetre) overall with 0.60mm (zero point six zero Millimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with screws prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
94 | Providing and fixing valley 90 cm(ninety Centimetre) overall 0.60mm (zero point six zero Millimetre) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre)dia with prepainted G.I. limpet and bitumen washers complete with all accessories as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
95 | Providing and fixing 0.60mm (zero point six zero Millimetre) thick prepainted steel Plain sheet in facia with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5(five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia Metre with prepainted limpet and rubber washers complete with all accesoriees as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals.. |
96 | Providing and fixing flushing 38cm (thrity eight Centimetre) overall with 0.60mm (zero point six zero Millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty)microns over 5 (five) microns primer coating + back coat of polyster of 5(five) microns over 5(five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six Millimetre) dia Metre & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
97 | Providing and fixing M.S. BP Sheet 1.66mm to 2mm (one point six six Millimetre to two Millimetre) thick in eaves board/facia/soffits /ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
98 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 (thirty) grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm (fifty Millimetre) thick compacted bed of coarse sand, filling the jointswith line sand etc. all complete as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
99 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
100 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm (forty Millimetre), including painting of fittings and brackets, cutting and making good the walls wherever required 510x1040 mm (five hundred ten into one thsoaund forty Millimetre) bowl depth 250 (two hundred fifty) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
101 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm (forty Millimetre) C.P brass waste and 40mm (forty Millimetre) C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm (six hundred into four hundred fifty into two hundrd Millimetre) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
102 | Providing and fixing 8 mm (eight Millimetre)dia C.P. / S.S. Jet with flexible tube upto 1 Metre (one Metre) long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
103 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. Pan as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
104 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
105 | Providing and fixing 600x450 mm (six hundred into four hundred fifty Millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six Millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
106 | Providing and fixing 600x120x5 mm (six hundred into one hundred twenty into five Millimetre) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (forty Millimetre) long screws, rawl plugs etc., complete as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
107 | Providing and fixing toilet paper holder C P Brassas per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
108 | Providing and fixing PTMT liquid soap container 109 mm (one hundred nine Millimetre) wide, 125 mm (one hundred twenty five Millimetre) high and 112 mm (one hundred twelve Millimetre) distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms (one hundred five Grams) :Kent touchless Sanitiser/ Liquid soap Dispenser-1000ml (one thosaund Milliliter, white as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
109 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.: 600 mm (six hundred Millimetre) long towel rail with total length of 645 mm (six hundred forty five Millimetre), width 78 mm (seventy eight Millimetre) and effective height of 88 mm (eighty eight Millimetre), weighing not less than 190 gms (one hundred ninety Grams) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
110 | Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C (eighty degree Centigrate), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 Metre (one point zero zero Metre) spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc.1620 [20 mm (twenty Millimetre) OD] pipe as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
111 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15 mm (fifteen Millimetre) nominal bore as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
112 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm (twenty five to forty Millimetre) nominal bore as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
113 | Fixing water Metre and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water Metre and stop cock to be paid separately) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
114 | Providng and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) of 25 mm (twenty five Millimetre) nominal bore as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
115 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm (fifteen Millimetre) nominal bore as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
116 | Providing and fixing brass ferrule with C.I. mouth coverincluding boring and tapping the main 15 mm (fifteen Millimetre) nominal bore as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
117 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45cm (forty five Centimetre) length 15 mm (fifteen Millimetre) nominal bore as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
118 | Constructing masonry Chamber 30x30x50 cm (thirty into thirty into fifty Centimetre) inside, in brick work in cement mortar 1:4 (one cement :four coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (one hundred into one hundred into seventy five Millimetre) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate) 20 mm (twenty Millimetre) nominal size, i/c necessary excavation, foundation concrete 1:5:10 ( one cement : five fine sand : ten graded stone aggregate) 40mm (forty Millimetre) nominal sizeand inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12mm (twelve Millimetre) thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (seven point five) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
119 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
120 | Providing and fixing 115 mm (one hundred fifteen Millimetre) nominal bore, 86 mm (eighty six Millimetre) long, weighing not less than 88 gms (eighty eight Grams) PTMT concealed stop cock with flange of Jaguar andapproved quality and colour as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
121 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931,15mm (fifteen Millimetre) nominal bore as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
122 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms (six hundred ninety Grams) 15 mm (fifteen Millimetre) nominal bore as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
123 | Providing and fixing PTMT pillar cock of approved quality and colour 15 mm (fifteen Millimetre) nominal bore, 107 mm (one hundred seven Millimetre) long, weighing not less than 110 gms (one hundred ten Grams) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
124 | Providing and fixing PTMT soap Dish Holder having length of 138mm (one hundred thirty eight Millimetre), breadth 102mm(one hundred two Millimetre), height of 75mm (seventy five Millimetre) with concealed fitting arrangements, weighing not less than 106 gms (one hundred six Grams) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
125 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (one cement : one fine sand) including testing of joints etc. complete : 100 mm (one hundred Millimetre) diametre as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
126 | Providing and laying cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate) 40 mm (forty Millimetre) nominal size all-round S.W. pipes including bed concrete as per standard design :150 mm (one hundred fifty Millimetre) diametre S.W. pipe |
127 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm (three hundred into three hundred Millimetre) size (inside) the weight of cover to be not less than 4.50 kg (four point five zero Kilogram) and frame to be not less than 2.70 kg (two point seven zero) as per standard design as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
128 | Constructing brick masonry circular type manhole 0.91 m (zero point nine one) internal dia at bottom and 0.56m (zero point five six Metre) dia at top in cement mortar 1:4 (one cement : four coarse sand), inside cement plaster 12 mm (twelve Millimetre) thick with cement mortar 1:3 (one cement : three coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (one cement : three coarse sand : six graded stone aggregate) 40 mm (forty Millimetre) nominal size, and making necessary channel in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate) 20 mm (twenty Millimetre) nominal size finished with a floating coat of neat cement, all complete 0.91 m (zero point nine one Metre) deep with S.F.R.C. cover and frame (heavy duty, HD-20 (twenty) grade designation) 560 mm (five hundred sixty Millimetre) internal diametre con- forming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. (one hundred eighty two Kilogram), fixed in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate) 20 mm (twenty Millmetre) nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm (twelve Millimetre) thick cement plaster at the external surface shall be paid for separately)with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five)as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
129 | Supplying and fixing C.I. cover without frame for manholes 455x610 mm (four hundred fifty five into six hundred ten Millimetre) rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg (twenty three Kilogram) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
130 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm (one hundred Millimetre) sand cast Iron P or S trap, 10 litre (ten Litre) low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Big size Orissa Pan No. 2071 of size 580x440 mm (five hundred eighty into four hundred forty Millimetre) of CERA or equivalent as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
131 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre (ten litre) low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :White Vitreous china Anglo Indian Closet No. 2061 of size 550x460 mm (five hundred fifty into four hundred sixty Millimetre) of CERA or equivalent as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
132 | Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen Millimetre) C.P. brass pillar taps, 32 mm (thirty two Millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: Wash basin No.1012 or CERA or equivalent as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
133 | Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen Millimetre) C.P. brass pillar taps, 32 mm(thirty two Millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: Wash basin No.1007 or CERA or equivalent as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
134 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm(five Centimetre to twenty Centimetre), in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
135 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals in:- |
136 | 150 mm (one hundred fifty Millimetre) dia. |
137 | 110 mm (one hundred ten Millimetre) dia. |
138 | 75 mm (seventy five Millimetre) dia. |
139 | Providing and fixing white vetrious china flat back wall corner type lipped front urinal basin of 430x260x350 mm (four hundred thirty into two hundred sixty into three hundred fifty Millimetre) and 340x410x265 mm (three hundred forty into four hundred ten into two hundred sixty five Millimetre) sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :Range of two urinal basins with 5 litre (five Litter) white P.V.C. automatic flushing cistern :White Vitreous china Flat Back Large No. 5001 of CERA or equivalent as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
140 | Providing and fixing white vetrious chinaDivision plateof CERA or equivalentof size 90x320x720 mm (ninety into three hundred twenty into seven hundred twenty Millimetre) and including its fittingscutting and making good the walls wherever required as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
141 | Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90 mm (one hundred ten Millimetre into ninety Millimetre) as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
142 | Providing and fixing 110 mm ( one hundred ten Millimetre) dia PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three Millimetre) thick bolts and nuts complete/includingfixing with approved adhesive etc. completeas per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
143 | Providing and fixing 110 mm ( one hundred ten Millimetre) dia PVCplain bendsISI markedincludingfixing with approved adhesive etc. completeas per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
144 | Providing and fixing110 mm ( one hundred ten Millimetre) dia PVC door bend with oval access door insertion rubber washer 3 mm(Three Millimetre) thick bolts and nuts ISI market completeincluding fixing with approved adhesive etc. completeas per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals |
145 | Providing and fixing 110 mm ( one hundred ten Millimetre) dia PVC Collar ISI markedincluding fixing with approved adhesive etc. complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals |
146 | Providing and fixing 110 mm ( one hundred ten Millimetre) diaPVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
147 | Providing and fixing PVC ‘P’ or ‘S’ trap for water closet (squatting pan ) ISI markedincluding jointing the trapwith pan and PVC pipe with approved adhesive etc. complete.110 mm( one hundred ten Millimetre) dia as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
148 | P/FU Shaped wall mountedrail with hinges 600 x 100mm ( six hundred into one hundred Millimetre)Cat No. B2210107 and Wall Mounted Grab Bar 600mm ( six hundred Millimetre) Long CAT No.B2210106jaquar or equivalent Superior quality as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
149 | Providing & fixing 100mm (one hundred Millimetre) dai C.P. gratings of superior quality for floor, gully or nahani trapas per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
150 | Providing & fixing Electric gyser of 25 Ltrs. (twenty five Litre) Capacity of approved make and manufacture as per direction of Engineer-in-Charge including carriage of material within all leads, lifts & other incidentals. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail