}

Proposed Concrete Road And Underground Drainage Pipe Line From Maruti Temple To Ranubai Temple At Ward No 16 Chakan For Chakan Municipal Council Chakan Tal Khed Dist Pune, chakan-Maharashtra

Directorate Of Municipal Administration-DMA has published Proposed Concrete Road And Underground Drainage Pipe Line From Maruti Temple To Ranubai Temple At Ward No 16 Chakan For Chakan Municipal Council Chakan Tal Khed Dist Pune. Submission Date for this Tender is 04-02-2022. Road Work Tenders in chakan Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

30792942
Proposed Concrete Road And Underground Drainage Pipe Line From Maruti Temple To Ranubai Temple At Ward No 16 Chakan For Chakan Municipal Council Chakan Tal Khed Dist Pune
Open Tender
Indian
Maharashtra
chakan
04-02-2022

Tender Details

Proposed Concrete Road And Underground Drainage Pipe Line From Maruti Temple To Ranubai Temple At Ward No 16 Chakan For Chakan Municipal Council Chakan Tal Khed Dist Pune

Key Value

Document Fees
INR 3300 /-
EMD
INR 55000.0 /-
Tender Value
INR 15.49 Lakhs /-

BOQ Items

Name of Work:-Proposed Concrete road & Underground Drainage Pipe Line From Maruti Temple to Ranubai Temple, at Ward No.16 Chakan for Chakan Municipal Council,Chakan. Tal - Khed,Dist - Pune.
Sl. No. Item Description
1Sub Estimate No.01
2Excavation for roadway in earth soil of all sorts, sand, gravel or soft murum including dressing section to the required grade camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 mand spreading for embankment or stacking as directed.
3Excavation for roadway in hard murum and boulder including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 mand spreading for embankment or stacking as directed.
4Excavation for roadway in hard rock by wedging and chiselling or line drilling including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 mand spreading for embankment or stacking as directed.
5Disposing of Excavated Material including loading, unloading & stacking for 3 K.M. lead etc. comlete
6Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade).
7Providing and laying in situ cement concrete M-30 with tremix treatment for 200milimetrethickness for Concrete Road including laying plastic sheet of 125 micron with groove cutting of 4milimetrewide and 20milimetredeep, with necessary refilling with bitumen (excluding reinforcement) with course and fine agreegates (Natural sand/ VSI sand finely washed crushed sand) etc. complete.
8Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb without gutter (as per IRC:86-1983) embedded 125 mm below ground level over M-10 P.C.C. finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff anywhere in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant.
9Providing & constructing Brick Masonry Inspection Chamber 60 cm x 45 cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round GlazedStone Warepipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. cover medium duty 140 kilogram with frame etc. complete.
10Providing and fixing Road junction / Information sign board of size 0.90 m x 0.60 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade.
11Total Amount 1
12Sub Estimate No.02
13Filling in plinth and ing in trenches floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete.
14Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints,excluding GST levied by Gol and GoM in all respect, inspection charges, transport to departmental stores/ site, unloading and stacking etc. complete as per IS-458/1988 Note: One collar should be supplied with each full length plain ended RCC pipe, cost including in rates below. One rubber ring should be supplied with each full length of socketed pipe, cost included in rates below (Class "NP-II" 250mm Dia) (Rubber ring Joint)
15Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in CM 1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar), including cost of conveyance from stores to site of works, cost of jointing material, labour, giving hydraulic testing, etc. complete as directed by Engineer-in-charge. (Class "NP-II" 250 mm Dia) (Rubber ring Joint)
16Hydraulic testing of RCC pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. (Class "NP-II" 250mm Dia) (Rubber ring Joint)
17Refillina the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete
18Add 12% GST
19Add 1.00% For Labour Insurance
20Additional Royalty Charges
21Quality Control Testing Charges
22Add 2% Contengencies Charges
23Total Amount 2
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail