}

Upgradation Of Sub Centre Into Health And Wellness Centre At Varambatta Under Kappukunnu Phc. Upgradation Of Sub Centre Into Health And Wellness Centre At Varambatta Under Kappukunnu Phc., Wayanad-Kerala

Steel Industrials Kerala Limited has published Upgradation Of Sub Centre Into Health And Wellness Centre At Varambatta Under Kappukunnu Phc. Upgradation Of Sub Centre Into Health And Wellness Centre At Varambatta Under Kappukunnu Phc.. Submission Date for this Tender is 27-01-2022. Building Work Tenders in Wayanad Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

30792772
Upgradation Of Sub Centre Into Health And Wellness Centre At Varambatta Under Kappukunnu Phc. Upgradation Of Sub Centre Into Health And Wellness Centre At Varambatta Under Kappukunnu Phc.
Open Tender
Indian
Kerala
Wayanad
27-01-2022

Tender Details

Upgradation Of Sub Centre Into Health And Wellness Centre At Varambatta Under Kappukunnu Phc. Upgradation Of Sub Centre Into Health And Wellness Centre At Varambatta Under Kappukunnu Phc.

Key Value

Document Fees
INR 590 /-
EMD
INR 3331.0 /-
Tender Value
INR 2.22 Lakhs /-

BOQ Items

Work Name : Upgradation of subcenter into health and wellness center at Varambetta under Kappukunnu PHC
Sl. No. Item Description
1Civil works
213.88 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
313.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
413.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
513.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
621.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
721.12.2 : Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Powder coated minimum thickness 50 micron aluminium tubular handle bar
821.13 : Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete
921.17 : Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ).
10od267585/2021_2022 : Providing and fixing 4 mm thick ACP Sheet, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws, etc. complete as per architectural drawings and directions of Engineer-in-Charge.<br>
1150.18.9.13.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 12 Kgf/ cm2- External work- exposed on wall
1250.18.9.14.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - External work - Exposed on wall
1350.18.9.19.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall
14od143288/2021_2022 : Engaging carpenter for essential works
15od145547/2021_2022 : Engaging plumber for watersupply line and other maintenance activities.
16od145555/2021_2022 : Supplying and Providing Metal Painted Name Board for display details of work, including all expenses
17Electrical
18od145548/2021_2022 : Engaging wireman for dismantling and stacking old pipes,fittings
191.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C
20od145550/2021_2022 : Supply of 1200 mm, 1 x 20W LED Tube light
2190.4.5.2 : Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizesusing standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.
221.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail