}

Special Repair To Sewage Line, Manholes And Sanitary Fitting At Ybo Line (84 Qtrs) And Provn Of 02 Toilets At P-07 Under Zone Ii Area At Jaipur Mil Stn Special Repair To Sewage Line, Manholes And Sanitary Fitting At Ybo Line (84 Qtrs) And Provn Of 02 Toil, jaipur-Rajasthan

Military Engineer Services-MES has published Special Repair To Sewage Line, Manholes And Sanitary Fitting At Ybo Line (84 Qtrs) And Provn Of 02 Toilets At P-07 Under Zone Ii Area At Jaipur Mil Stn Special Repair To Sewage Line, Manholes And Sanitary Fitting At Ybo Line (84 Qtrs) And Provn Of 02 Toil. Submission Date for this Tender is 16-02-2022. Sewerage Construction Tenders in jaipur Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

30792029
Corrigendum : Special Repair To Sewage Line, Manholes And Sanitary Fitting At Ybo Line (84 Qtrs) And Provn Of 02 Toilets At P-07 Under Zone Ii Area At Jaipur Mil Stn Special Repair To Sewage Line, Manholes And Sanitary Fitting At Ybo Line (84 Qtrs) And Provn Of 02 Toil
Open Tender
Indian
Rajasthan
jaipur
16-02-2022

Tender Details

Special Repair To Sewage Line, Manholes And Sanitary Fitting At Ybo Line (84 Qtrs) And Provn Of 02 Toilets At P-07 Under Zone Ii Area At Jaipur Mil Stn Special Repair To Sewage Line, Manholes And Sanitary Fitting At Ybo Line (84 Qtrs) And Provn Of 02 Toilets At P-07 Under Zone Ii Area At Jaipur Mil Stn

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 09-Feb-2022 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 16-02-2022

Key Value

Document Fees
INR 500 /-
EMD
INR 58000.0 /-
Tender Value
INR 29 Lakhs /-

BOQ Items

Name of Work: SPECIAL REPAIR TO SEWAGE LINE, MANHOLES AND SANITARY FITTING AT YBO LINE (84 QTRS) AND PROVN OF 02 TOILETS AT P-07 UNDER ZONE II AREA AT JAIPUR MIL STN
Sl. No. Item Description
1Excavating in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc not exceeding 10 sq m on plan and not exceeding 1.5 metre in depth and getting outin soft/loose soil.
2Excavating in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc not exceeding 10 sq m on plan and not exceeding 1.5 metre in depth and getting outin hard/dense soil.
3Excavatingin trenches, not exceeding 1.5 metre wide, exceeding 1.5 metre and not exceeding 3 metre in depth for wall foundationetc or for manholes etc not exceeding 10 Sqm area on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil.
4Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding25 cm.etc complete as per specified and directed.
5Removing excavated material exceeding 250 metresbut not exceeding500 metres and depositing where directed at a level n exc. 1.5 m above the starting point. etc complete as per specified and directed.
6M&L for Cement concrete (1:4:8) type D2, using 40 mm graded aggregate in foundations, filling and mass concrete etc complete as per specified and directed.
7M&L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in benching including necessary form work etc complete all as specified & directed.
8Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.
9M&L brick workwith subclass "B"bricks straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar 1:4 etc complete all as specified & directed.
10M&L for brick work with Fly Ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified & directed.
11M&L for rendering 15mm thick in cement mortar 1:6 on other than fair faces finished even & smooth without using extra cement. etc complete all as specified & directed.
12M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces finished even & smooth without using extra cement. etc complete all as specified & directed.
13M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls mixed with WPC 3% by weight of cement finished even & smooth without using extra cement. etc complete all as specified & directed. Note:- WPC shall be measured and paid separately
14Supply only Integral water proofing compound.
15M&L for rendering 10 mm thick in CM (1:4) on brickwork or concrete surfaces etc complete all as specified and directed.
16M&L cement concrete type C-1 (1:3:6) using 20mm graded stone aggregates as, in lintels upto 1.5 m clear span, oils, steps; seismic and other similar bands, plinth courses, string courses, lacing courses parapets and railings upto 60 cm in height, copings kneelers, apex stones bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc complete all as per specified and directed.
17M&L Precast cement concrete B1 type, (1:2:4) using 20 mm graded aggregate in landings cover slabs (for manholes etc.) chullah, hoods, chajjas, water troughs mangers, shelves and similar articles with plain faces with set in cement mortar 1:6. etc complete all as per specified and directed.
18Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cracking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. etc complete all as specified & directed.
19Mild steel TMT bars 5 mm dia and over upto and including 8mm dia, cut to length, bent to shape required including cracking, bending in stirrups, spacers and binders etc complete all as specified & directed.
20Mild steel TMT bars 6mm to 8mm mm dia and over, cut to length, bent to shape required including cracking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. etc complete all as specified & directed.
21M&L salt glazed stoneware gully traps, square or round mouthed type "P", 150 mm x 150 mm size etc complete all as specified & directed.
22Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete ) set in cement mortar Internal dia of pipe 150 mm. etc complete all as specified & directed.
23Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete ) set in cement mortar Internal dia of pipe 200 mm. etc complete all as specified & directed.
24Supply and laying DWC pipes( Double wall corrugated) of class SN-4, IS-16098 (Part-II) of size internal dia of 150 mm, laid in trenches and jointed complete with coupler,bends,tee, reducers etc complete all as specified & directed. Make: Ultra plus DWC PE pipe of Supreme/Corfit of Prince/D-Rex DWC of Astral or equivalent as approved by GE
25Supply and laying DWC pipes( Double wall corrugated) of class SN-4, IS-16098 (Part-II) of size internal dia of 200 mm, laid in trenches and jointed complete with coupler,bends,tee, reducers etc complete all as specified & directed. Make: Ultra plus DWC PE pipe of Supreme/Corfit of Prince/D-Rex DWC of Astralor equivalent as approved by GE
26Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified & directed.
27Demolition Cement concrete is reinforced Concrete of any description and iin any position not otherwise specifically provided for etc complete all as specified & directed.
28M&L cutting into existing manholes for connecting new drains of 150 mm internal dai of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4, type B-1 smooth finished, and reforming benching etc complete all as specified & directed.
29M&L cutting into existing manholes for connecting new drains of 200 mm internal dai of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4, type B-1 smooth finished, and reforming benching etc complete all as specified & directed.
30Taking down eaves gutter and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc including cleaning or refixing or removal to store (measured overall as fixed along the center line over fittings and accessories) etc complete all as specified & directed.
31S&F PVC (SWR) pipes single socketed, in anylength with rubber ring joints, laid in trenches or in floors of 75 mm bore etc complete all as specified and directed.
32S&F PVC (SWR) bends any radius of 110 mm bore etc complete all as specified & directed.
33S&F PVC (SWR) bends any radius of 75 mm bore etc complete all as specified & directed.
34S&F PVC (SWR) junction single, (single T), equal or unequal of 75 mm bore etc complete all as specified & directed.
35S&F PVC (SWR) junction single, (single T), equal or unequal of 110 mm bore etc complete all as specified & directed.
36S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.
37S&F PVC (SWR) 75mm bore pipes single socketed, in any length with rubber ring joints, fixed to wall or trenches complete all as specified and directed.
38S&F PVC (SWR) bends 110mm bore, with oval access doors complete all as specified and directed.
39S&F PVC (SWR) bends 75mm bore, with oval access doors complete all as specified and directed.
40S&F PVC (SWR) branch piece single equal or unequal 110mm with oval acess door complete all as specified and directed.
41S&F PVC (SWR) branch piece single equal or unequal 75mm with oval acess door complete all as specified and directed.
42S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.
43S&F PVC (SWR) vent cowl 75mm bore complete all as specified and directed.
44M&L PVC (SWR) floor trap 75mm with grating including jointing with solvent cement complete all as specified and directed.
45M&L 75 mm thick plain cement concrete type C-1 (1:3:6) using 20mm graded stone aggregates as in plinth protections etc complete all as per specified and directed.
46M&L 50 mm thick plain cement concrete type C-1 (1:3:6) using 20mm graded stone aggregates as in plinth protections, sub base of floor etc complete all as per specified and directed.
47S&F in repair stack clamps, out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, size of bore of pipe in 110mm etc. complete all as specified and directed.
48S&F in repair stack clamps, out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, size of bore of pipe in 75mm etc. complete all as specified and directed.
49M&L for surface dressing not exc 15 cm deep in soft / loose soil.
50Providing 40mm thick damp proofing course 1:2:4 type B-0 including necessary form work using water proofing compound. Note : WPC shall be measured and paid separetly.
51Providing 20mm thick bearing plaster in CM 1:4 on fair faces of brick/ concrete surface
52Preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion,white or tintedover a coat of chalk whiting complete all as specified and as directed.
53M&L RCC M-25 (Design mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.
54M&L RCC M-25 (Design mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span.
55M&L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelvves including sup-ports, overhangs, etc. also splays between floors and beams, etc finish withrough finish flat surface.
56Form work to soffits of suspended slabsuch as roof slab not exc 200mm thick to rough finished surface of concrete
57Form work to edges of conc. Flat floor and roofs n.exc 20cm wideto rough finished surface of concrete .
58M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint.
59Earth filling, Spreading, levelling in layers n exc 25cm thick including well ramming and watering as required.
60M&L for hard core of gauge 63mm but n.exc 100mm deposited spread and leveled in layers
61M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base of floors
62M&L 75mm thick PCC 1:4:8 type D-2 using 40mm gaded stone aggregate as in sub base of floors.
63M&L for coloured non skid ceramic tiles 300 x 300 x 7mm thick in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6
64M and L for coloured Glazed ceramic tiles300X450mmX7mm thickset and includingjointed in neat cement slurry and pointed in coloured cement to match the flooras on vertical surfaces laid over and including 10mm thick cement screed in 1:4.
65S&F SolidPVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified and approved.
66S&F factory made solid panel PVC door shutter withMS square tube30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC sheet stirip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top,lock and bottom rail on either side & as gap insert for top rail & bottom rail .panelling of plain colourPVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement fixed in the frame at site as per specification.
67S&F Butt hinges extruded alumonium alloy with galvanised mild steel hinges pin anodisedand fixed, type B-21 of 100mm.
68M&L for Aluminium anodised barrel tower bolt of extruded section of 150mm
69M&L forAluminium handles cast type anodised of 150mm
70S&FGI tubing medium grade with all fitting and fixedto walls & ceilings or laid in floors, bore of pipe 15mmcomplete all as specified and directed by Engineer-in-charge.
71S&FGI tubing medium grade with all fitting and fixedto walls & ceilings or laid in floors, bore of pipe 20mmcomplete all as specified.
72Cutting chases,pinning in making good to facing where requried and pointing in cement mortar 1:3 to ends or edge of landings,steps,cills,sunshade,shelves, lintel etc. tubes or concealed conduit etc. and making good, cutting not exc 10 cm girth
73S&F Vitreous china wash down water closet pan (pedestal pattern), white excluding flushing cistern and flush pipe)incl. P or S trap complete allas specified
74Supply and fixingPVC valve less, symphonic action type, flushing cistern, low level white with inlet, ball valve, float and handle including brackets complete
75S&F PVC connection 15mm size with PTMT nuts of length 450mm.
76S&F Stop valve cast copper alloy with crutch or butter fly handle screwed both ends & screwed for iron pipe of 20mmfancy type chromium plated concealed type fixed complete all as directed.
77M&L for angle valves, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down high pressure, screwed both ends for 15 mm bore dia iron pipe or for union, ISI marked, supplied and fixed in repairs complete all as specified and as directed.
78S&F Towel rail 600mm long of cast copper alloy, chromium plated, fixed complete all as specified and directed.
79S&F 600x450mm bevelled edge mirror of selected quality glass mounted on 6mm th AC building board or commercia ply.
80S&F Counter Top Vitreous china wash basin of size 580mmx450mm including Weste pipe, waste coupling fixed with brackets fixed Complete all as specified
81S&F waste pipe 32mm for WHB with coupling fixed in repairs.
82S&F Central hole basin mixer for hot and cold water brass chromium plated screwed down with long sunk and fly nuts screwed for 15 mm dia (CAT PART NO: 7250, MAKE: PRAYAG or equivalent as approved by GE)
83S&F wall mixer with L- bend For overhead showered brass chromium plated screwed down for 15 mm dia (CAT PART NO: 7275, MAKE: PRAYAG or equivalent as approved by GE)
84S&F Rotational moulded polythene water storage tank two layered (cylindrical vertical with closed top) hoisted and fixed in position of 500 ltrs incl dismantling
85Ball valve high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixedfixed in repair.of 20mm Make : Prayag or equivalent as approved by GE
86S&F plastic water colset seat cover white colour with flat bottem and mild steel chromium plated hinging device
87S&F Spray jet brass chromium plated with and including 1.5 mtr long PVC flexible reinforced pipe for EWC dia of pipe 15 mm ( CAT PART NO. 521& 522 , MAKE: PRAYAG or equivalent as approved by GE)
88S&F Toilet paper holder brass chromium plated fancy type ( CAT PART NO. 197, MAKE: PRAYAG or equivalent as approved by GE)
89S&F Towel ring of cast copper alloy chromium plated fixed and repair ( CAT PART NO: BA-AA , MAKE: PRAYAG or equivalent as approved by GE)
90S&F Soap dish of cast copper alloy chromium plated fixed and repair ( CAT PART NO: BA-25 , MAKE: PRAYAG or equivalent as approved by GE)
91M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 1.5 Sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings /fixing accessories and unwelded sunken galvanised pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenoic laminated white sheet cover for mounting switches, scokets, fan regulators as required for one light point controlled by one switch.
92S&F switch piano flush button single pole one way 6 Amp complete.
93S&F ceiling rose 3 plates polycarbonate body complete.
94S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43, IK-09 with reversible double door, recess mounted , having insulated 100 Amps tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with SPN, 240 volts, 4 ways. Make - Legrand cat ref no 507610 or equivalent as approved by GE.
95S&F in repair MCBs of "C" seriessingle pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete. Make - Legrand cat ref no 408587 to 408595 or equivalent as approved by GE.
96S&F in repair MCBs of "C" seriesSPN 10 to 32 Amps, 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete. Make - Legrand cat ref no 408631 to 408636 or equivalent as approved by GE.
97Supplying and fixingLED batten (1.2 m) made of CRCA sheet housing with a PC glossy difusser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 19 watt (including driver) having colour temperature of 6500K, CRI>80, THD < 10% and PF > 0.95complete. Make - Philips cat ref no. ENDURALED BATTEN "BN 108C LED 20S PSU CDL WH" or Bajaj cat ref no. BLTRU 20W WH VIVA or equivalent in other specified make as approved.
98Supplying and fixing in repairs LED batten 9 watt, 900 lumens operating voltage 160 to 360 volts, colour temperature 6500K including connection all as per Philips Astra Line 9-Watt LED Battenor equivalent as approved by GE.
99Supplying and fixing in repairs LED bulkhead fitting 9 watt IP 66 & IK 09 with polycarbonate body duly prewired connection with 0.75 sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable all as per Philips cat ref no. WT202W LED6S CW PSU S2 PC or equivalent as approved by GE.
100S&F Exhaust fan of size 300 mm sweep totally enclosed highly efficient heavy duty motar with pressure dia cast alluminiumrotor mounted on two ball bearing and rigid frame with rubber mounting for scilent operation by making suitable hole on wall of bricks/ stone
101Supply and laying cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable(heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 sqmm 2 core.
102Schedule of Credit
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail