}

Making School Buildings Barrier Free And Accessible To Children With Special Needs 1310400 Ghoga G(Co Ed)Sss Making School Buildings Barrier Free And Accessible To Children With Special Needs 1310400 Ghoga G(Co Ed)Sss, alipur-Delhi

Public Works Department-PWD has published Making School Buildings Barrier Free And Accessible To Children With Special Needs 1310400 Ghoga G(Co Ed)Sss Making School Buildings Barrier Free And Accessible To Children With Special Needs 1310400 Ghoga G(Co Ed)Sss. Submission Date for this Tender is 27-01-2022. Barriers Tenders in alipur Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

30791094
Making School Buildings Barrier Free And Accessible To Children With Special Needs 1310400 Ghoga G(Co Ed)Sss Making School Buildings Barrier Free And Accessible To Children With Special Needs 1310400 Ghoga G(Co Ed)Sss
Open Tender
Indian
Delhi
alipur
27-01-2022

Tender Details

Making School Buildings Barrier Free And Accessible To Children With Special Needs 1310400 Ghoga G(Co Ed)Sss Making School Buildings Barrier Free And Accessible To Children With Special Needs 1310400 Ghoga G(Co Ed)Sss

Key Value

Document Fees
Refer document
EMD
INR 19981.0 /-
Tender Value
INR 9.99 Lakhs /-

BOQ Items

Name of Work:- Making school buildings barrier free and accessible to children with special needs: 1310400-Ghoga-G(CO-ED)SSS
Sl. No. Item Description
1Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge: All kinds of soil
2Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
3Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size).
4Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
5Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
6Providing and fixing to existing door frames. 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.
7Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
8Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete.
9Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc.
10Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
11Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
1212 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
13Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
14Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below
15Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
16Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
17Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
18Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622, of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
19Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
20Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
21Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm
22Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
23Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. With cement mortar 1:4 (1cement: 4 coarse sand)
24Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : Old work (one or more coats)
25Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 15 mm nominal bore
26Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm
27Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
28Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm
29Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
30Total
31Add Cost Index 22.69%:-
32Total
33Providing and fixing Building Entrance signage / Tactile Layout / Emergency Evacuation Layouton the wall or with any other required structure, with provision of multilingual text integral with 4mm thick blue Acrylic base plate with min 0.5 mm Alluminium sheet at the back with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm, raised above base plate by not less than 0.8mm and the equivalent word/s written in Hindi / any language as required with same specifications with Grade 1 Braille to be integral with the sign face and should be raised 0.5mm above Acrylic base plate. Each signboard to be fixed strictly as per the Harmonised Guidelines & Space Standards for Barrier Free Built Environment for persons with Disability, issued By MOUD, Govt. of India, and as as per approved drawings and complete as per the directions of Engineer - In - Charge. (Note:- i).Payment for structure, if required, shall be paid separately.) ii) Size of the Signboards shall be proportional to the layout plan of the particular building, Min Size of the above signboards shall not be less than 1200mm X 750 mm.
34Providing and fixing signages on the wall or with any other required structure, with provision of multilingual text integral with 4mm thick blue Acrylic base plate with min 0.5 mm Alluminium sheet at the back with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm, raised above base plate by not less than 0.8mm and the equivalent word/s written in Hindi / any language as required with same specifications with Grade 1 Braille to be integral with the sign face and should be raised 0.5mm above Acrylic base plate. Each signboard to be fixed strictly as per the Harmonised Guidelines & Space Standards for Barrier Free Built Environment for persons with Disability, issued By MOUD, Govt. of India, and as as per approved drawings and complete as per the directions of Engineer - In - Charge. Note:- i).Payment for structure, if required, shall be paid separately.) ii) The Above Nomenclature shall be applicable for all types of signgaes like a)Identificationsigngaes (For Eg Room Names / Toilet facility / Drinking Water / Staircase / Entry / Exit / Lift etc.) of the size 150 mm X 230 mm or 200 X 200 mm).b) Floor Directories ( Signboard Placed near the Lift / Staircase / Entry to the particular Floor indicating the facilities on that floor. These are normally also callled as Directional Signages.). Min Size of these Boards shall not be less that 450 mm X 450 mm. c) Emergency Exit Sign Boards ( Generally used Text as "In Case of Emergency, Do Not Use The Lift" ,"Emegency Exit" etc.)
35Providing and fixing 50 mm wide Yellow colour, self addhesive "EDGE STRIPS" of approved make on risers of staircase to help persons with visual diabilities and elederly including cutting and pasting complete in all respect as per direction of Engineer-in-charge.
36Providing and fixing 25 mm wide high intensity Anti-Skid reflective tape of approved make on edges of treads of staircase including cutting, pasting etc. complete in all respect and as per direction of Engineer-in-charge
37Providing and fixing Stainless Steel (Grade 304) Braille Labels of size 170mm x 35mm X 0.5 mm having Braille dots raised 0.5mm above base platewith one SS rivet of same grade and adhesive of approved makeon handrails, complete as per the directions of the engineer in charge
38Providing and fixing in position "U" shapedGrab Bar made up of Heavy Duty stainless steel (grade 304) of 750 mm in length & 40 mm dia (Outer dia with 3 mm thick sheet ) seamless pipeincluding Hinge,base plate and steel fastners, in the toilets as per manufacturers specification, as per drawings and "Harmonised Guidelines & Space Standard for Barrier Free Environment issued by MOUD, Govt Of India" to make them Accessible for Persons with Disabilities. Rate shall include all accessories, labour and material, complete as per direction of Engineer-in-charge.
39Providing and fixing in position "L" shapedGrab Bar made up of Heavy Duty stainless steel (grade 304) 40 mm (Outer dia with 3 mm thick sheet ) diaseamless pipe, & 750 mm in vertical length& 900 mm in horizontallengthincluding base plate andsteel fastners in the toilets as per manufacturers specification complete as per drawings and ""Harmonised Guidelines & Space Standard for Barrier Free Environment issued by MOUD, Govt Of India" to make them Accessible for Persons with Disabilities. Rate shall include all accessories, labour and material, complete as per direction of Engineer-in-charge
40For cutting existing kota stone floor in corridors for provision of tactile
41Dismantling glazed tiles in walls, dado skirting include plaster backing etc complete & disposal of rubbish to the dumbinh ground within 50 meres lead as per direction of Engineer-in-charge.
42Providing and fixing acrylic Braille indicators of size 170mm x 35mm for handrails of the approved design and make having Braille dots raised 0.5mm above base plate, to be installed at the specified locations as per the directions of the engineer in charge complete as per design/specificaitons and guidelines as per the entire satisfaction of the the Engineer-in-charge
43Total
44Less 9.50% as per Delhi Govt. Circular:-
45Total
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail